Tender For Comprehensive Maintenance To Hangars And Otm Accn Under Age B/R-Ii Of Afs Chakeri Kanpur
Tender Value
45 Lakhs
Estimated cost
Bid Submission
15 Jul 2026
6 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kanpur Nagar → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Comprehensive Maintenance To Hangars And Otm Accn Under Age B/R-Ii Of Afs Chakeri Kanpur
BOQ
| Sl. No. | Item Description |
| 1 | Labour only in adjustment of the float valve or ball valve or lever or handle to without replacement of any part of the high level cistern & OHT of any size complete all as specified and directed by Engr-in-charge. |
| 2 | S&F in repairs of float valve of PTMT with epoxy coated Aluminum rod &high density plastic ball screwed for iron pipe and fixed weight-142 gm for 15mm dia pipe complete all as specified and directed by Engr-in-charge. |
| 3 | All as per sl item No 2 but 20 mm weight 210 gm bore pipe complete all as specified and directed by Engr-in-charge. |
| 4 | All as per sl item No 2 but 25 mm weight 455 gm bore pipe complete all as specified and directed by Engr-in-charge. |
| 5 | S&F in repair 45cm long PVC connection with two no PTMT nut and rubber washers suitable for 15mm bore GI Pipe in replacement of existing one complete all as specified and directed by Engr-in-charge. |
| 6 | S&F in repair 60cm long PVC connection with two no PTMT nut and rubber washers suitable for 15mm bore GI Pipe in replacement of existing one complete all as specified and directed by Engr-in-charge. |
| 7 | Petty repairs for leaking water in bib tap, pillar tap, stop cock, angle valve, WHB mixture , wall mixture, concealed etc of any description any size by changing washer/ jumper wall etc complete all as specified and directed by Engr-in-charge. |
| 8 | M&L in replacement of brass face spindle of existing 15mm dia bore concealed stop cock fixed as in repairs of complete all as specified and directed by Engr-in-charge. |
| 9 | M&L in replacement of brass face spindle (half turn / full turn) of existing 15mm dia bore bib cock, stop cock, angle valve, C P Pillar cock, Wash basic mixture and wall mixture of any description complete all as specified and directed by Engr-in-charge. |
| 10 | S&F in repairs of 32 mm waste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms complete all as specified and directed by Engr-in-charge. |
| 11 | S&F in repairs of 40 mm waste coupling of PTMT (half or full threaded) Minimum weight 40mm-60gms complete all as specified and directed by Engr-in-charge. |
| 12 | M&L in replacement of existing chromium plated grating of size 125mm dia (with hole or without hole) complete for Nahani/Floor traps and fixed as in repairs of complete all as specified and directed by Engr-in-charge. |
| 13 | S&F in repairs of 125 mm fancy type shower roses brass chromium plated with C P arms for15mm bore GI pipe complete all as specified and directed by Engr-in-charge. |
| 14 | All as per Srl Item No 13 above but of PTMT with 195mm long bend of 45 degree complete all as specified and directed by Engr-in-charge. |
| 15 | S&F in repairs of 32 mm bore of pipe low density (LDPE) of pressure rating 6 kg/ Sqcm fixed to wall or floor etc including fittings complete all as specified and as directed complete all as specified and directed by Engr-in-charge. |
| 16 | S&F in repairs of PVC PTMT bib tap 15mm dia pipe with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete with check nut 15mm bore complete all as specified and directed by Engr-in-charge. |
| 17 | S&F in repairs of 15mm dia bore gun metal GATE valve complete all as specified and directed by Engr-in-charge. |
| 18 | S&F in repairs of 20mm dia bore gun metal GATE valve complete all as specified and directed by Engr-in-charge. |
| 19 | S&F in repairs of PVC PTMT stop cock/angle cock 15mm dia pipe with crutch or butterfly handle screwed iron pipe or for brass ferrule complete with check nuts 15mm complete all as specified and directed by Engr-in-charge. |
| 20 | S&F in repairs of soap dish brass chromium plated fixed to wall with brass chromium plated screw complete all as specified and directed by Engr-in-charge. |
| 21 | S&F in repairs of stainless steel Fancy type drapery rod with brackets 20-25 mm bore with bracket and fancy type nob on both end top cut to length as required of colour as selected & directed by Engr-in-charge.Note : The fancy type top of both ends to be provided of each length of curtain rod and the rate are included in running meter of drapery rod. |
| 22 | S&F Vitreous China Urinal, Half stall type,white (excluding flushing cistern, flush pipe and waste pipe, complete all as specified and directed. |
| 23 | S & F in repairs PVC waste pipe 40mm/32mm dia, 90 cm long for WHB/Sink/urinal with cup, fixed in repairs complete. |
| 24 | S&F in reapirs towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms ) |
| 25 | S&F in repairs PTMT Health faucet incl flexible pipe of 1.5m length and fixing brackets and fixed as per manufacturers instruction |
| 26 | Petty repairs of low level flushing cistern any size/description for repairs of leaking water by adjusting/replacing the washer and adjustment of lever require for making the cistern functional complete all as specified and directed by Engr-in-charge. |
| 27 | Removal of air lock/blockage of water in G I and PPR Tubing 15/20/25 mm bore including taking down (if required) cleaning the pipe or fitting etc and refixing the same in position complete including new GI fitting if required for refixing complete all as specified and directed by Engr-in-charge. |
| 28 | Draining out water from existing PVC water storage tank exc 500 ltr and not exc 1000 ltr capacity and cleaning silt deposited therein, washing out with soap water or surf including taking down connection and refixing complete all as specified and directed by Engr-in-charge. Note : Date of cleaning shall be written on tanks by synthetic enamel paint after cleaning |
| 29 | Draining out water from existing PVC water storage tank exc 250 ltr and not exc 500 ltr capacity and cleaning silt deposited therein, washing out with soap water or surf including taking down connection and refixing complete all as specified and directed by Engr-in-charge.Note : Date of cleaning shall be written on tanks by synthetic enamel paint after cleaning |
| 30 | S&F in repair kitchen sink with drainage board made of stainless steel 1.0 mm thick in kitchen with plug , washer and waste coupling including bedding layer in CM (1:6) in wall as with fixing cantilever bracket and connecting union to pipes over all size 915x460 mm bowl size 410x330x160 mm including taking out unserviceable kitchen sink. |
| 31 | S&F in repair sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe,overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm as approved by Engineer-in-Charge complete all as specified and directed by Engr-in-charge. |
| 32 | S&F in repairs stainless steel kitchen rack standard size (24x36x10) inch complete all as specified and directed. |
| 33 | S&F in repairs toilet paper holder of Chromium plated complete all as specified and directed. |
| 34 | S&F in repairs of PVC ( SWR) pipes single socketed in any length with rubber ring joints fixed to wall ( 110mm bore) including flat iron claim for proper fixing complete all as specified and directed by Engr-in-charge. |
| 35 | All as per sl item No 34.00 but refixing only including taking down existing old pipe complete all as specified and directed by Engr-in-charge. |
| 36 | S&F in repairs of PVC (SWR) bends/Tee 110mm dia complete all as specified and directed by Engr-in-charge. |
| 37 | S&F of 15mm bore GI tubing medium grade with all fittings and fixed complete to wall and ceiling or laid in floors including taking down complete all as specified and directed by Engr-in-charge. |
| 38 | All as per sl item No 37.00 but 20mm dia complete all as specified and directed by Engr-in-charge. |
| 39 | All as per sl item No 38.00 but 25mm dia complete all as specified and directed by Engr-in-charge. |
| 40 | S&F in repairs of 75 mm bore sand cast iron drain waste/vent pipes fixed to wall, floor jointed with cement joints includingdismantling of old cast iron drain, waste, vent pipe of any description complete all as specified and directed by Engr-in-charge. |
| 41 | S&F in repairs of 100 mm bore sand cast iron drain waste/vent pipes fixed to walls or floor jointed with lead joints including dismantling of old cast iron drain, waste, vent pipe of any description complete all as specified and directed by Engr-in-charge. |
| 42 | M&L for Cast iron door bends of 75 mm dia complete all as specified and directed by Engr-in-charge. |
| 43 | M&L for Cast iron door bends of 100 mm dia complete all as specified and directed by Engr-in-charge. |
| 44 | M&L for Cast iron branch pieces, tee equal or unequal spigot or socket type or with parallel branches to 75 mm dia pipe fitted with access door complete all as specified and directed by Engr-in-charge. |
| 45 | M&L for Cast iron branch pieces of 100 mm dia complete all as specified and directed by Engr-in-charge. |
| 46 | S&F in repairs of for 75mm dia of outlet cast iron Nahani trap with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 using 20 mm gradded stone aggregate complete all as specified and directed by Engr-in-charge. |
| 47 | S&F in repairs of vitreous China squatting pan of Orissa pattern of approved make of size 580 mm X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe including lime concrete bedding and connection to anti syphonage pipe etc including making good to floor complete all as specified and directed by Engr-in-charge. |
| 48 | S&F in repairs of vitreous china wash basin, white, flat back, size 550 mm x 400 mm fixed on and including cast iron cantilever bracket 32 mm dia brass waste coupling and including fixing of tap, waste fitting and union complete all as specified and directed by Engr-in-charge. |
| 49 | S&F in repairs of PVC low level cistern of 10 lit capacity inclusive of brackets and PVC bend long type and connection to flush pipe of any size and pattern with inlet ball valve float and handle complete of approved make complete all as specified and directed by Engr-in-charge. |
| 50 | S&F in repairs of white colour triple layer rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and jointed in position all as specified in SSR Part-I (500 ltr capacity) including disconnecting existing tank and providing all necessary fittings for connecting with pipe line, metal lockable cover complete all as specified and directed by Engr-in-charge. |
| 51 | S&F in repairs of white colour triple layer rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and jointed in position all as specified in SSR Part-I (1000 ltr capacity) including disconnecting existing tank and providing all necessary fittings for connecting with pipe line, metal lockable cover complete all as specified and directed by Engr-in-charge. |
| 52 | S&F in repairs of white colour triple layer rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and jointed in position all as specified in SSR Part-I (2000 ltr capacity) including disconnecting existing tank and providing all necessary fittings for connecting with pipe line, metal lockable cover complete all as specified and directed by Engr-in-charge. |
| 53 | S&F in repairs of vitreous china wash down water closet pan (pedestal pattern) white (excluding flushing cistern and flush pipe) including connection to drain or outgoing pipe and flush pipe anti syphonage pipe etc complete and making good to floor complete all as specified and directed by Engr-in-charge. |
| 54 | S&F in repairs of water closet seat cover, white closed pattern with flat bottom & cover & mild steel chromium plated hinging device complete all as specified and directed by Engr-in-charge. |
| 55 | Demolition of brick work of any type built in cement mortar in foul condition/ normal condition etc complete all as specified and directed by Engr-in-charge. |
| 56 | M&L for brick work built in cement and sand mortar (1:6) with sub class 'B' old size bricks straight or curved on plan exceeding 6m means radius complete all as specified and directed by Engr-in-charge. |
| 57 | M&L for 15 mm thick rendering in CM (1:6) on fair faces surfaces of brick walls finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge. |
| 58 | M&L for 15 mm thick rendering in CM (1:4) on fair faces surfaces of brick walls finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge. |
| 59 | M&L for rendering 15mm thick in cm (1:4) on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement including taking down cement plaster or concrete, brick surface and raking out hacking for key scrubbing down with water to receive plaster complete all as specified and directed by Engr-in-charge. |
| 60 | M&L for rendering 15mm thick in cm (1:6) on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement including taking down cement plaster or concrete, brick surface and raking out hacking for key scrubbing down with water to receive plaster complete all as specified and directed by Engr-in-charge. |
| 61 | M&L for rendering 10mm thick in cm (1:3) on fair faces of ceiling surfaces finished even & smooth without using extra cement including taking down cement plaster or concrete, brick surface and raking out hacking for key scrubbing down with water to receive plaster complete all as specified and directed by Engr-in-charge. |
| 62 | M & L for preparation of new undecorated surfaces of walls and applying two coat of Oil Bound Distemper over a coat of primer and 1mm thick wall care putty, all as specified and directed. |
| 63 | All as per sl item No 62 but on ceiling complete all as specified and directed by Engr-in-charge. |
| 64 | M&L for preparation of newly plastered surfaces of walls and applying two coats of Cement Base Paint of approved tint, complete all as specified and directed by Engr-in-charge. |
| 65 | Taking down and refixing of old steel tubing connection in new or old position ( wall etc) including cleaning for refixing bore of pipe 15mm dia including connected GI fittings complete all as specified and directed by Engr-in-charge. |
| 66 | All as per Srl Item No 65 above but 20mm bore of pipe including connected GI fittings complete all as specified and directed by Engr-in-charge. |
| 67 | All as per Srl Item No 65 above but 25mm bore of pipe including connected GI fittings complete all as specified and directed by Engr-in-charge. |
| 68 | S&F in repairs of small fittings of galvanised iron medium grade/ cpvc brass round fittings such as socket, elbow, reducer, nipple, tee, union, tank nipple, tank connection and other fittings etc of any size for 15mm bore (ISI marked) complete all as specified and directed by Engr-in-charge. |
| 69 | All as per Srl Item No 68 above but 20mm GI fitting/cpvc (ISI marked) complete all as specified and directed by Engr-in-charge. |
| 70 | All as per Srl Item No 68 above but 25 mm GI fitting (ISI marked) complete all as specified and directed by Engr-in-charge. |
| 71 | S&F in repairs of Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engr-in-charge. |
| 72 | Welding at site in position MS butt hinges and projecting type hinges, exc 2.5cm but n.exc 5cm in length and thickness of metal to be welded n.exc 6mm thick complete. |
| 73 | S & F in repairs Steel window handles left/right, and peg stay including welding to base plate, pin and handle/brackets fixed in repairs complete. |
| 74 | S & F in repairs extruded aluminum alloy handle, fabricated type, anodized 150mm size, fixed in repairs complete. |
| 75 | S & F in repairs extruded aluminum alloy handle, fabricated type, anodized 75mm size, fixed in repairs complete. |
| 76 | S & F in repairs aluminum, anodized, barrel tower bolts of extruded section 200 mm long, fixed in repairs complete. |
| 77 | S & F in repairs aluminum, anodized, barrel tower bolts of extruded section 150 mm long, fixed in repairs complete. |
| 78 | S & F in repairs aluminum, anodized, barrel tower bolts of extruded section 100 mm long, fixed in repairs complete. |
| 79 | S & F in repairs aluminium alloy, anodised, sliding door bolt 300mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy, fixed in repairs complete. |
| 80 | S & F in repairs Butt hinges medium weight, cold rolled mild steel 100mm size complete. |
| 81 | S & F in repairs Butt hinges medium weight cold rolled mild steel 75mm size complete. |
| 82 | S & F in repairs Hasp and staple 125mm size, safety type, aluminum anodised including bolt to hinge plate, fixed in repairs with screws complete. |
| 83 | S & F in repairs 150 mm, ordinary rat tail rod pattern springs of MS including roller and roller plate, fixed in repairs complete. |
| 84 | S & F in repairs Door closer hydraulically regulated, aluminium body(die caste), designation No.3, universal type, suitable for door shutters of weight between 61 to 80 Kg, fixed in repairs complete. |
| 85 | S&F in repair double action floor spring hydraulically regulated made up of aluminium alloy sheet foundation box with stainless steel cover fixed to Aluminium doors. |
| 86 | S & F in repairs 150 mm Aluminium floor door stopper anodised hard drawn steel spring all as specied and directed. |
| 87 | S&F in repairs of mortice lock brass 4 levers vertical type size of 100 mm with 3 key complete all as specified and directed by Engr-in-charge. |
| 88 | S&F in Repairs Mortice lock with two levers (vertical type) size 100mm , mild steel body and fixed in repairs |
| 89 | Easing of wooden door shutters/Almn door/PVC door shutter/Almn window for properly closing/opening tightening of hinges or changing the position of hinges adjustment of tower bolts sliding bolt complete all as specified and directed by Engr-in-charge. |
| 90 | Easing of steel window shutter for properly closing/opening tightening of hinges by oiling, greasing or by replacing of new box type hinges including necessary cutting & welding complete all as specified and directed by Engr-in-charge. |
| 91 | M&L for Refixing Aluminium shutters of any description exceeding 1 Sqm and not exceeding 2.5 Sqm each in the same opening after taking down, easing and adjusting including fixing new top/bottom/side rails and refixing builders hardware as required and renewal of unserviceable screws including bottom rod and all required accesary complete. |
| 92 | S&F aluminium sheet plates of 1.0mm thickness, any size fixed with aluminium alloy screws etc fixed in repairs complete. |
| 93 | Taking down hood of rolling shutter 1.25mm thick each by making all arrangement like ladder, staging rope, chain & pulley etc carrying out repair works, including replacement of nut bolts & Nails etc replacing defective parts, oiling greasing the mechanical parts including side rails and refixing the same in position and repairing the damaged cemented masonry/concrete to match with the old structure complete all as specified and directed by Engr-in-charge. |
| 94 | S&F in repairs of Ball bearing for rolling shutter as per site requirement complete all as specified and directed by Engr-in-charge. |
| 95 | S&F in repairs of spring wire for rolling shutter each as per site requirement complete all as specified and directed by Engr-in-charge. |
| 96 | S&F in repairs of CP pillar tap 15mm bore dia cast copper alloy with cap capston chromium plated screwed down high pressure with or without lettered \\"Hot\\" or \\"Cold\\" with long screwed shanks and fly buts screwed for iron pipe complete all as specified and directed by Engr-in-charge. |
| 97 | S&F in repairs of of Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-110gms complete all as specified and directed by Engr-in-charge. |
| 98 | S&F in repairs of for bib taps 15mm bore (for iron pipe) cast copper alloy with fancy type chromium plated butter fly handle screwed down including fixed in repairs of complete all as specified and directed by Engr-in-charge. |
| 99 | S&F in repairs of for angle stop valves 15mm bore (for iron pipe) fancy type chromium plated screwed down high pressure with butterfly handle screwed both ends including fixed in repairs of complete all as specified and directed by Engr-in-charge. |
| 100 | S&F in repairs of for PVC tank cover as in PVC over head tank cover including cover to be fixed in frame with threading system. The frame to be fixed with tank by 4 nos PVC nut bolts and arolite complete all as specified and directed by Engr-in-charge. Note: The cover to be provided for 500/1000 ltrs capacity. |
| 101 | S&F in repairs of CP Health Faucet with 1.5mtr long SS tube and hook complete all as specified and directed by Engr-in-charge. |
| 102 | S&F in repairs of colour venation blind 100mm width of strip complete all as specified and directed by Engr-in-charge. |
| 103 | S&F in repairs of Wall mixture 15mm bore dia cast copper alloy with cap capston chromium plated screwed down high pressure with or without lettered \\"Hot\\" or \\"Cold\\" with long screwed shanks and fly buts screwed for iron pipe complete all as specified and directed by Engr-in-charge. |
| 104 | S&F in repairs of Basin mixture 15mm bore dia cast copper alloy with cap capston chromium plated screwed down high pressure with or without lettered \\"Hot\\" or \\"Cold\\" with long screwed shanks and fly buts screwed for iron pipe complete all as specified and directed by Engr-in-charge. |
| 105 | S&F in repair fancy type chromium plated L bend wall mixer complete all as specified and directed. |
| 106 | S&F in repair fancy type chromium plated bib tap elbow operated complete all as specified and directed. |
| 107 | S&F in repair fancy type chromium plated swan neck tap for sink/WHB complete all as specified and directed. |
| 108 | S&F in repair fancy type PTMT swan neck tap sink/ WHB complete all as specified and directed. |
| 109 | M&L for filling gap, joints of tile, holes etc with white cement in patches all as directed by Egr-in-Charge |
| 110 | Hacking out old broken glass (anythickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads. |
| 111 | M&L for Sheet glass 3.0mm thick ,ordinary qualityand glazing with oil putty in square n exc 0.5 sq. m in each pane |
| 112 | S&F figured/frosted glass 3mm thick pin head type and glazing with oil putty in squares n. exc 0.5 sqm in each pan |
| 113 | M&L for Sheet glass 4.8mm thick ,ordinary qualityand glazing with oil putty in square n exc 0.5 sq. m in each pane |
| 114 | S&F in repairs of black glass, 5.5mm thick and glazing complete with beads fixed with brass screws size exc 0.50 Sqm each pane complete all as specified and directed by Engr-in-charge. |
| 115 | S&F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers size exc 0.50 Sqm each pane complete all as specified and directed by Engr-in-charge. |
| 116 | S&F in repairs of 600 mm X 450 mm mirror 5 mm thick of premium quality glass,with pvc frame with chromium plated brass screw and cup washer complete all as specified and directed by Engr-in-charge. |
| 117 | S&F in repairs of Mirror Cabinet Multi utility (355x 455mm) complete all as specified and directed by Engr-in-charge. |
| 118 | S&F in repairs of corner glass shelf 12\\" complete all as specified and directed by Engr-in-charge. |
| 119 | S&F Aluminium door seal with screw complete all as specified and directed by Engr-in-charge. |
| 120 | S&F in repairs of framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed by Engr-in-charge. |
| 121 | S & F 18 mm thick 100% Lead free both side plain laminated PVC/WPC sheet of any colour with using sunmica of choice colour on both side for kitchen cabinet shutters, shelves and shutters for cup board or similar use and required bracket etc. The panels shall be fabricated using adhesive and screws where ever required. All edges shall be covered with 2 mm thick edge bending tape or 90 degree edge bent finish as per manufacterer’s instruction and make approved by GE complete all as specified and directed. Note : All fittings and fixtures such as Soft closer, handles, piano hinges lock etc for shutter should be included rated quoated by the contractor. |
| 122 | M&L 12 mm thick of size 600x600 mm mineral fibre false ceiling system of pattern classic lite RH 99 (bevelled tegular) of Armstrong or equivalent make and model including grid system using hot dipped galvanised steel section, exposed surface with pre-powder coated capping, main runner and cross runner and to comprise main tee/runner 15mm x 38 mm size (load carring capacity 14 kg/sqm) spaced at 1200 mm centres securely fixed to the structural soffit and flush fitting 1200 mm long cross tee/runner to be interlocked between main runners at 600 mm centre to centre from 1200x 600 mm module, cut sub cross tee/runner 600mm require independent support. Wall angle of size 19mm x 19mm, secured to the periphery of the wall at 450 mm maximum centres. The above grid is suspended at every 1200 mm centre to centre in both direction and starting from wall at the distance 350 mm from wall by using 3.50 mm dia aquiline wire with suitable fasteners and hook clip complete all as directed. |
| 123 | S&F in repairs of ‘L’ Bihari hinge for kitchen cupboard complete all as specified and directed by Engr-in-charge. |
| 124 | S&F in repairs of brass chromium plated tubular towel rail 20 mm dia D type, 60 cm long between flanges complete all as specified and directed by Engr-in-charge. |
| 125 | S&F in repairs Particle board 12 mm thick, medium density, flat pressed,single layer type or three layer type with BWRtype adhesive, fixed with screws in pelmet boxes or in narrow widths n. exc l5cm each,rebated or flat edged frame work, fixed in repairs complete. |
| 126 | S&F in repair telescopic runner for modular kitchen complete all as specified and directed by Engr-in-charge. |
| 127 | M&L for 18 to 20mm thick Granite work (table rubbed and polished) of Lakha Red or Telephone Black colour for shelves, counter slabs, floors etc. in 15mm backing of CM (1:4) and pointing with white cemeat (mixed with suitable colour) (1:2)using marble dustwith admixture of pigment to match with shade of granite including demolition of (terrezo/ PCC/granite of any description) including cement mortar bedding but not backing) and removing the rubbish from the complex complete all as specified and directed by Engr-in-charge. |
| 128 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing ) complete all as specified and directed. . |
| 129 | Demolition of cement concrte in ground floor and paving not exceeding 15cm thick (below or above ground level) complete all as directed by Engineer-in-Charge. |
| 130 | M&L 25mm thick cement concrete type B0, 1:2:4, (using 12.5 mm graded stone aggregate) as in sub base for floor. |
| 131 | M&L for non skid ceramic coloured joint free tiles 7 to 8 mm thick square or rectangular of size exc 0.11 sqm but not exc 0.18 sqm in floors laid over and including 15 mm thick screed bed in CM 1:6 and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified. |
| 132 | M&L for non skid ceramic coloured joint free tiles 7 to 8 mm thick square or rectangular of size exc 0.18 but not exc 0.38 sqm in floors laid over and including 15 mm thick screed bed in CM 1:6 and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles complete all as specified. |
| 133 | M & L for vitrified light shade tiles 10 mm thick (square/rectangular) polished, area of each tiles n exc 0.36 Sqm in floors etc. set and and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer of cement mortar (1:6) finished even and rough to receive the top layer. |
| 134 | M&L for glazed coloured digital ceremic joint free tiles in vertical surface 600X300 /450x300 mm size 7-8 mm thick or as required, set over and cncluding 10 mm thick backing coat in CM 1:4 and jointed in neat cement slurry and pointed in white or coloured cement tomatch shade of tiles including dismantling of old tiles and removing the same from site, complete all as specified. |
| 135 | Labour only fixing of soap dish/towel rod/towel rack/glass shelf/looking mirror/towel ring/plate rack/ etc complete all as specified and directed by Engr-in-charge. |
| 136 | Labour only refixing of all type of CP bath/kitchen fittings complete all as specified and directed by Engr-in-charge. |
| 137 | Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 Sqm each and removal from site complete all as specified and directed by Engr-in-charge. |
| 138 | Taking down chowkats or frame with shutter (without taking out shutter from the frame) exceeding 1.50 Sqm and n exc 4.00 Sqm each and removal from site complete all as specified and directed by Engr-in-charge. |
| 139 | Taking down of shutters of any description exceeding 2 Sqm complete all as specified and directed by Engr-in-charge. |
| 140 | M&L for pressed steel window CRCA frame using profile 80x40x1.25mm thick & openable outside glass pane shutter & openable inside wirmesh shutter included guard bare of 12 mm MS square frame complete with fixture & fitting such as box type hinges, peg stays glazing clips and handle, locking arrangement complete all as specified and directed by Engr-in-charge. Note:- 3 mm thick glass pane, SS wiremesh & guard bar/Grill & PCC for pressed steel frame included in above rates. |
| 141 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50x 100 mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), inimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid or/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.all as specified and directed |
| 142 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x 125 mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), inimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid or/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.all as specified and directed. |
| 143 | S&F 30 mm thick plain WPC factory made wire mess solid door shutters (conforming as per IS-4020) with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company.The door to be pannened with SS mosquito mesh and XTN alluminium mesh for additional strength and safty purpose. door should be fixed with SS hinges and SS screw. door should be water proof, termite proof, fire retardant and having screw holding capacity complete all as manufacturer's specification & drawings & as directed by Engr -in -charge. |
| 144 | Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) having minimum density of 600 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary SS screws shall be paid separately) complete, all as specified and directed. |
| 145 | S&F Butt hinges, stainless steel 100mm complete all as specified and directed |
| 146 | S&F aluminium anodised barrel tower boltsof extruded section, length of bolt in mm 200 complete all as specified and directed. |
| 147 | S&F repair aluminium alloy anodized sliding door bolt with hasp staples (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts or extruded sections or cast aluminium alloy length of bolt 250mm complete all as specified and directed by Engr-in-charge. |
| 148 | S&F extruded anodised aluminium alloy handles fabricated type 150mm complete all as specified and as directed. |
| 149 | Notes :- 1 (i) The unit rates quoted for above items are aso includes to provide the following workers to execute the above works as well as to attend the complaint assigned by concerned JE. (ii) Contractor is also bound to deploy more man power if required to any of the item to execute the above work.2. Tradesman & helper required daily (except holiday & Sunday) as under:- (i) Two Plumber with two helper for all plumbing items in Sch ‘A’ Sec-I (ii) Two Carpenter with two helper or all carpentry related items of Sch ‘A’ Sec-I (iii) One mason with one helper for all cement related item of Sch ‘A’ Sec-I. 3. The labour as indicated in Note No 2 above shall be supervise by a supervisor of the contractor who will manage all the working labour till the time from 8.30 AM to 5.30 PM.4. The labour as indicated in Note No 2 above shall be reported to the complaint cell at 8.30 AM and shall be left at 5.30 PM after handing over the receipt obtained from the users regarding attending the complaints.5. The complaint shall be attended on the same day failing which a recovery of Rs. 500/- per day per complaint shall be made from the contractor's dues.6. In case of absent of the any worker from the duty a recovery of Rs. 500/- for tradesman and Rs. 400/- for helper shall be made from the contractor's dues.7. Attendance register shal be maintained by the contractor and same shall be signed by JE concerned everyday and by Engr-in-Charge at his /her surprises check. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysJul 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender