|
| 1 | Taking down cement plaster on brick or stone walls or ceiling etc including raking out joints hacking for key scrubing down with water etc complete all as specifed and directed. |
| 2 | M&L for 15mm thick rendering on fair faces of brick wall in CM (1:4) finished even & smooth, complete as specified and directed.Note : The rate is inclusive of required scaffolding to execute the work upto the height of 12m and cleaning of the site after completion. |
| 3 | M&L for 15 mm thick rendering in cement mortar (1:6) on fair faces of concrete or brick, finished even and smooth without using extra cement complete all as specified and directed.Note : The rate is inclusive of required scaffolding to execute the work upto the height of 12m and cleaning of the site after completion. |
| 4 | M&L for 10 mm thick cement plaster on ceiling in CM 1:3 finished even and smooth without using extra cement complete all as specified and directed.The rate is inclusive of required scaffolding to execute the work upto the height of 12m and cleaning of the site after completion. |
| 5 | M&L for preparation of new surfaces of wall and Applying two coats of cement base paint over a coat of primer on wall complete all as specified and directed. |
| 6 | M & L for preparation of newly plastered surfaces of walls and applying high-performance exterior weather coat paint in two coats over one coat of exterior primer complete all as specified and directed.Note : The rate is inclusive of all scaffolding, materials, labor, and cleaning of the site after completion. |
| 7 | M&L for preparation of newly plastered surfaces of walls including cornices plaster etc and applying two coat oil bound distemper of any colour on over a coat of primer over applying a coat of wall care putty on wall including rubbing with sand paper to achieve a smooth surface and sharp straight edges etc complete all as specified and directed. |
| 8 | M & L preparation of new surfaces of ceiling and applying three coats of white wash complete all as specified and directed. |
| 9 | Complete removal of existing treatment i.e. white wash ,colour wash ,distempering etc. applying Two coats of cement base paint (approved colour) over a coat of primer complete all as specified and directed. |
| 10 | Complete removal of existing treatment i.e. white wash, colour wash, cement paint etc. on wall and ceiling complete, and preparing the surfaces smooth including necessary repair to depressions/cracks by wall care putty/POP and applying two coats of exterior weather proof paint 100% acrylic emulsion over a coat of exterior water based primer complete all as specified and directed. |
| 11 | Demolition of brick work built in cement mortar complete all as specified and as directed. |
| 12 | M&L Brick work old size sub class ' B' bricks straight or curved in plan exceeding 6 mtr mean radius built in cement mortar 1:6 complete all as specified and as directed. |
| 13 | M&L Brick work (except bricks) old size sub class ' B' brick straight or curved on plan exceeding 6 mtr mean radius built in cement mortar 1:6 complete all as specified and as directed. |
| 14 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed. |
| 15 | M&L for 25 mm thick PCC Type B-0 1:2:4 (using 12.5 mm graded stone aggregate) as in leveling /sub base of flooring complete all as specified and directed. |
| 16 | M & L for Vitrified tiles 8-10 mm thick (square/ rectangular), Double charged, polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with shade of tiles over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 17 | ditto- all as per item No. 16 above But as in skirting and including rendering in CM (1:4) complete all as specified and directed. |
| 18 | M& L glazed coloured ceramic elevated/3D tiles in vertical surfaces 300x450x7 mm or as required size at site in dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering in CM 1:4 complete all as specified and dierected. |
| 19 | M & L full body Vitrified tiles 8-10mm thick light shade , polished, area of each tiles not exceeding 0.36 sqm, in floors and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with shade of tiles over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 20 | ditto- all as per item No. 19 above But as in skirting and including rendering in CM (1:4) complete all as specified and directed. |
| 21 | M&L for 7 to 8 mm thick non skid ceramic coloured tiles (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors etc; laid jointing in neat cement slurry and pointed in white cement mixed with pigment to match with shade of tiles over & including 15mm thick screed bed in CM(1:6) complete all as specified and directed. |
| 22 | M&L for glazed ceramic coloured tiles of size 450x300 mm & 6 to 7 mm thick on vertical surface of walls such as in dado, skirting etc; including and jointing in neat cement slurry and pointed in white cement mixed with pigment to match with shade of tiles, including 10mm thick rendering in CM(1:4) complete all as specified and directed |
| 23 | Taking up or down 15 mm dia steel tubing and connection including cleaning for refixing or removal complete all as specified and directed. |
| 24 | Taking up or down 20 mm dia steel tubing and connection including cleaning for refixing or removal complete and all as specified and directed. |
| 25 | M&L for cutting chases for concealed water tubing and making good in CM (1:3), cutting not exc 10 CM girth in brick wall complete all as specified and directed. |
| 26 | S & F GI steel tubing 15mm bore medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete as specified and directed. |
| 27 | S & F GI steel tubing 20mm bore medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete as specified and directed. |
| 28 | Supplying and laying of 16 mm dia CPVC pipes SDR 11 including CPVC SDR 11 fittings like Brass threded elbow, Brass threded Tee, FBTA, MBTA etc on walls/ceiling or laying in floors complete all as specified and directed. |
| 29 | Supplying and laying of 20 mm dia CPVC pipes SDR 11 including CPVC SDR 11 fittings like Brass threded elbow, Brass threded Tee, FBTA, MBTA etc on walls/ceiling or laying in floors complete all as specified and directed. |
| 30 | S&F in repair 10 ltrs capacity low level PVC flushing cistern, valveless, symphonic type, white,with inlet,ball float and handle including brackets complete and all as specified and directed. |
| 31 | S&F15mm bore PVC connection 450mm long heavy duty with brass fly nut and warsher for hot and cold water complete and all as specified and directed |
| 32 | S&F15mm bore PVC connection 600mm long heavy duty with brass fly nut and warsher for hot and cold water complete and all as specified and directed |
| 33 | S&F in repairs angle stop valve 15 mm bore of PTMT of any colour high pressure screwed for iron pipe and fixed (min wt 90 gms ) all as specified and directed. |
| 34 | S&F in repairs Bib taps 15 mm bore standard of PTMT high pressure screwed for iron pipe and fixed (min wt 90 gms) all as specified and directed. |
| 35 | S&F in repair pillar tap standard of PTMT any colour high pressure screwed for iron pipe of 15 mm bore and fixed (Minimum weight 15mm 110gms) complete all as specified and directed. |
| 36 | S & F in repairs 15mm bore stop valves,fancy type chromium plated with long shank and cup (concealed type) screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 37 | S&F in repairs 15mm bore dia bib taps fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed complete as specified and directed. |
| 38 | S&F in repair 15 mm dia brass chromium plated pillar tap fancy type with fly nut capstan head screwed for 15 mm dia pipe complete all as specified and directed. |
| 39 | S & F in repair angular stop valves, cast copper alloy, fancy type 15mm bore chromium plated screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 40 | S & F in repair angular stop cock two way 15mm bore chromium plated screwed down high pressure with capstan head and flange complete all as specified and directed. |
| 41 | M & L for wall mixer 3 in 1 (provision for over head shower & hand shower) fixed in repair, complete all as specified and directed. |
| 42 | S & F in repair 15 mm bore, brass CP WHB mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed. |
| 43 | S&F in repairs brass chromium plated shower rose 125 mm dia with swivel joint complete all as specified and directed. |
| 44 | S&F in repairs waste pipe for Sink/WHB/Urinal, length exc 0.75m and as directed by Engr-in-Charge. |
| 45 | S&F in repair vitreous china wash down water closet pedestal pattern white with plastic seat cover (excluding fixing of bolt of flushing cistern and flush pipe) including all fitting complete all as specified and directed. |
| 46 | S&F in repairs WC squatting pan “Orissa Pattern” of size 580 x 440 mm white with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and lime concrete bedding complete all as specified in SSR and including S&F trap set complete all as specified and directed. |
| 47 | S & F in repair for cascade type China ware closet pedastal pattern of size (655 x 355 x735)mm snow white colour including 5D flushing, siphonic jet flushing, slim soft close seat cover, fixing bolts, complete all as specified and directed or equivalent. |
| 48 | S&F in repair Toilet paper holder, chromium plated , complete all as specified and directed. |
| 49 | S & F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 50 | S&F in repair Soap dish , chromium plated , complete all as specified and directed. |
| 51 | S&F in repair 15mm dia Gun metal globe or gate valve with iron wheel head, screwd both ends for iron pipe complete |
| 52 | S&F in repair 20mm dia Gun metal globe or gate valve with iron wheel head, screwd both ends for iron pipe complete |
| 53 | Dismantling PVC water tanks and remove to store capacity exc 250 Ltrs and n exc 500 Ltrs complete all as specified and directed. |
| 54 | S&F HDPE triple layer rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 500 litres capacity hoisted and fixed in position all as specified in SSR Pt-I including for hoisting into position either inside or outside of building, connecting up pipes, securing access cover etc including GI nipple of suitable size complete all as specified and directed. |
| 55 | Dismantling PVC water tanks and remove to store capacity exc 500 Ltrs and n exc 1000 Ltrs complete all as specified and directed. |
| 56 | S & F HDPE triple layer rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000 litres capacity hoisted and fixed in position all as specified in SSR Pt-I including for hoisting into position either inside or outside of building, connecting up pipes, securing access cover etc including GI nipple of suitable size complete all as specified and directed. |
| 57 | S & F 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod with high density plastic ball screwed for iron pipe and fixed complete all as specified and directed. |
| 58 | S & F in repair water tank cover capacity exc 250 ltrs and n exc 1000 ltrs complete all as specified and directed. |
| 59 | Supplying and fixing stainless steel jali (grating) with or without hole for waste pipe for floor/ Nahani trap complete all as specified and directed. |
| 60 | S&F in repairs Sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mmbowl size 410mm x 330mm x 160mm complete all as specifed. |
| 61 | S & F in repair Stainless steel Kitchen sink waste coupling fixed complete including joining to waste pipe complete all as specified and directed. |
| 62 | S & F in repair of bevelled edge looking mirror of size 600x450mm of selected quality with chromimum plated brass screwed and washer complete as specified and directed. |
| 63 | S&F in repair Corner shelf size 30 x 30mm with chromium plated grills & toughened glass base complete all as specified and directed. |
| 64 | M&L 18-20mm thick Granite (of any type) work (table rubbed and polished) in cooking flatforms, window cills and like in CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling of old tiles complete all as specified and directed. |
| 65 | S&F in repair Towel rail 20mm dia, 60cm long brass chromium plated with brackets complete all as specified and directed. |
| 66 | S & F in repair Vitreous China Urinal, Half stall type, white coloured complete including providing and fixing plugs, beddings urinals against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe, grating and union for discharge pipe complete as specified and directed. |
| 67 | S & F in repair Vitreous china urinal partition white of size 310x700 mm complete all as specified and directed. |
| 68 | S & F in repair stop valves push type for urinals, cast copper alloy, fancy type 15mm bore chromium plated screwed down, high pressure, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 69 | S & F in repair, oval counter type china wash hand basin of size (56 x 41) cms , snow white including waste coupling of PTMT 32mm, complete all as specified and directed by Engg-in-charge. |
| 70 | S&F in repairs for vitreous china wash basin white flat back size 550x400mm but exclusive taps, wastes, chain and plug and porcelain stopper but including cutting for and pinning in ends of brackets or erecting stand, waste pipe including brackets fixed in repairs complete all as specified and directed by engg-in-charge. |
| 71 | Dismantling of 75/ 110 mm dia SWR pipes, any pattern with all fittings complete all as specified and directed. |
| 72 | S & F PVC (SWR) 75 mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 73 | S & F PVC (SWR) 110 mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 74 | S&F (SWR) PVC Pipe 75 mm pipes single socketed in any length with rubber ring joints fixed to wall / ceiling including necessary acessories for fixing to wall complete all as specified and directed. |
| 75 | S&F (SWR) PVC Pipe 110 mm pipes double socketed in any length with rubber ring joints fixed to wall/ceiling including necessary acessories for fixing to wall complete all as specified and directed. |
| 76 | S&F PVC (SWR) bends 75 mm bore complete all as specified and directed. |
| 77 | S&F PVC (SWR) bends 110 mm bore complete all as specified and directed. |
| 78 | S & F PVC (SWR) junction single, (Single T) 75 mm dia equal or unequal complete all as specifed and directed. |
| 79 | S & F PVC (SWR) junction single, (Single T) 100 mm dia equal or unequal complete all as specifed and directed. |
| 80 | S & F PVC (SWR) floor trap 75mm dia of outlet, plain with Stainless steel grating including jointing with solvent cement complete all as specified and directed. |
| 81 | Taking down chowkhat or frames with shutter (without taking of shutters from the frame) n. exc 1.5 sqm, also making good damaged jambs with plaster or concrete complete all as specified and as directed. |
| 82 | All as per item No 81 but exc 1.5 sqm but n.exec 4sqm each. |
| 83 | M&L Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately) |
| 84 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade),calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistureproof, fire retardant and fixing with stainless steel butt hinges 4 nos of 100mm with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge.Note : (i) Cost of SS butt hinges shall deemed to be inclusive in the item. |
| 85 | S & F 150mm stainless steel handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge. |
| 86 | S & F 150 mm stainless steel barral tower bolt extruded section complete all as specified and directed. |
| 87 | S & F 250 mm Stainless steel sliding door bolt with hasp and staple(bolt type) including fixing with necessary accessaries complete all as specified and directed. |
| 88 | Supply and Fix top-hung/side-hung powder-coated aluminum ventilators, comprising extruded aluminum alloy sections (conforming to IS: 733 & IS: 1285) of approved make.Frame Details: Outer frame of size (63.5 x 38.1) mm and shutter frame of size 61.8 x 38.1 mm minimum 1.5 mm thickness.Finish: Electrostatic powder coating (minimum 50-60 microns) of approved color and shade.Glazing: 5mm thick clear/frosted float glass fixed with EPDM rubber gaskets to make it waterproof.Hardware: Stainless steel friction hinges, aluminum handle, and snap-on beading.Installation: Fixed to concrete/masonry with rawl plugs and screws, including filling gaps with sealant, complete as per architectural drawings and direction of the Engineer-in-charge.Note : Net Opening will be measured for payement purpose and No extra payement will be made for Glass or any other required accessory used in ventilator. |
| 89 | Providing and fixing factory made uPVG white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cutand fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor includes cost of glass and includes all other connectedaccessories. Net Opening will be measured for payment purpose.) |
| 90 | Area Not execeeding 2.00 Sqm |
| 91 | Area execeeding 2.00 Sqm |
| 92 | S & F framed work such as grills, grating etc. with ends of bars ouldered and or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 93 | M & L for preparation of new steel or iron surfaces of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat zink chrome red oxide primer complete all as specified and directed. Please Enable Macros to View BoQ information |
