|
| 1 | Supplying, installing, testing and balancing of extruded Aluminium powder coated Air Diffuser and complete with Flush, 20mm flanges with PVC/neoprene gasket, anti – smudge frame and removable inner core to facilitate the adjustable of air control damper, square/round/ rectangular as required.including fixing with steel screws etc. complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR . |
| 2 | Supply Air Diffuser with Volume Control damper |
| 3 | Return Air Diffuser without Volume Control damper |
| 4 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. |
| 5 | 160 mm dia |
| 6 | NON BSR ITEM |
| 7 | VRFIV PLUS ODU CONTROL BOARD |
| 8 | CDCO-D201-00 DUCTED CONTROL BOARD |
| 9 | ELOT-D211-00 Ducted LPS/smps board |
| 10 | CDCO-D170-00 Corded remote |
| 11 | CDCO-D380-00 Hi wall transformer |
| 12 | CDCO-D573-00 Hi wall controller |
| 13 | CDCO-D559-00 Hi wall Display |
| 14 | Single phase contactor |
| 15 | CDCO-D466-00- VRF ODU LPS Board |
| 16 | DVRF ODU FAN CARD |
| 17 | Compressor drive for SIAM/Hitachi |
| 18 | SITC of air cooled ducted split air conditioning machine with each having a capacity and details as mentioned below suitable for operation on refrigerant comprising of Scroll / Rotary type compressor hermatically sealed complete with automatic capacity, safety switches, lubrication system, Suitable capacity squirrel cage induction motor with class 'B' insulation suitable for operation on 415 + 10% volts, 50 Hz, A.C. supply for Blower motor, Necessary drive arrangement for blower motor, Matching Air cooled condenser with necessary fittings for refrigerant piping connections, necessary structural support for mounting condensers, Microprocessor based control panel complete with accessories, machine isolation / disconnect switch as per specifications, Suction line insulation with minimum 19 mm thick polyvinyl rubber insulation, valves and accessories to inter connect compressor and condender including pressure testing, vacuum. Pipe shall be hard drawn copper, Necessary starters suitable for compressor motor complete with O/L , U/V, phase reversal protection, single phase preventors etc complete as required.(Make: Daikin, Hitachi, Toshiba,Mitshibushi,Bluestar) |
| 19 | CONDENSING SPLIT AC - 8.5 TR CAPACITY, WITH R-410 (SINGLE CIRCUIT) |
| 20 | NON BSR 2025 |
| 21 | Supply,installation testing & commissioning of skid mounted Reverse Osmosis System of following output capacity designed at a minimum Flux at inlet and necessary of minimum 60-70% recovery, complete as required with the following items: - R.O plant at Terrace Level for Drinking purpose (Cost of Raw water tank and Product water Tank ,Shed for plant, plumbing and 3 phase supply arrangements to be paid extra) |
| 22 | RO plant 250 LPH (Skid mounted) |
| 23 | Filter Feed Pump 1 Nos. -Motor Rating 0.5 HP, MOC- CastIron ,Capacity 1000.LPH . |
| 24 | Pressure Sand Filter 1 Nos.- vessel made by FRP, sand +support bed media, single-multiport valve,Capacity 1000 LPH. |
| 25 | Activated Carbon Filter 1 Nos.- vessel made by FRP, Carbon+Support Bed media, single multiport valve,Capacity 1000 LPH. |
| 26 | Antiscalant Dosing System 1 Nos.- Electro-Magnetic Type, MOC- HDPE, 4 kg/c m2 Operating Pressure & Capicity 1.5LPH. |
| 27 | Dosing Tank 1 Nos.- MOC Of Tank-HDPE & Capacity OfDosing Tanks 50 Lit. |
| 28 | Micron Cartridge Filter 1 Nos.-MOC of Housing-ABS & Cartridge-PP, Capacity 1000 LPH, RATING 5 Micron. |
| 29 | High Pressure Pump 1 Nos.- Capacity 1000 LPH , VerticalMultistage Type Pump , MOC- SS 304 |
| 30 | Membranes 1 Nos. |
| 31 | UV System 1 Nos.- Capacity 250LPH |
| 32 | Instrumentation - 3 Nos. Of Pressure gauges, Pressureswitches 2 Nos., Conductivity Meter (Inbuilt in panel)1 Nos. online Type, Level Switch 2 Nos. ,Flow Indicator 1 Nos. |
| 33 | Control Panel 1 Nos. |
| 34 | ICPW 1 Lot.-Low Pressure / High Pressure - UPVC |
| 35 | Supply , Installation, Testing and Comissioning of IS:1475 marked self contained drinking water cooler with hermetically sealed compressor,non CFC refrigerent suitable for operation on 230V/1pH/50Hz AC supply,Full stainless steel (SS304)body (0.8 mm thick) and tank (0.5 mm thick) , stainless steel water tray,minimum two nos Brass Chrome plated faucets and suitable drainage system complete in all respect with required height MS fabricated and Painted Angle iron frame ( Cost of frame to be paid Extra )complete in all respect of the following capacity. |
| 36 | cooling capacity 150 Ltr./Hr. and storage capacity 150 Ltrs |
| 37 | SITC of RO water system with Filteration stages = Particilate filter- Membrane life enhancer filter- sediment filter- pre carbon filter- RO membrane filter- post carbon filter. Input power rating -230V AC, 50Hz, percentage of rejection TDS-90% or better, having following features (a) Double purification by RO with ESS or latest technology with TDS indicator. (b) Spin welded RO membrane housing to prevent tempering. (c) Push fit component for leak proof performance. (d) Fully automatic operation with auto start and auto off. (e) SS/ABS construction for corrosion free lifespan. (f) Equally suitable for water from all borewells, overhead storage tanks, water tankers and even municipal taps. (g) RO membrane flushing - Auto flush@ every start, every stop and every one hour of working for one minute, complete in all respect with following capacity. |
| 38 | Purification capacity - 50LPH, duty cycle 270-500 liters/day |
| 39 | SITC of Condensate water Drain pump suitable to Install with Existing Split type AC Indoor unit , single phase, 230V, including all acessories of pump like discharge tube, filter, reservoir etc. as required. |
| 40 | Add: G.S.T. 18% Please Enable Macros to View BoQ information |
