|
| 1 | Part A :- HDPE PIPES |
| 2 | Providing, lowering, laying and jointing in trenches, standard lengths HDPE ISI marked Pipes as per IS-4984: 1995 (amended up to date) with necessary jointing material like mechanical connectors, i.e. thread/ insert joint/ quick release coupler joint/ compression fitting joint or flanged joint and specials jointing pipe by electro fusion welding method , including transportation and freight charges, inspection charges, loading/ unloading charges, stacking of pipes, including cost of labour and material, specials (Tee, bend etc.), satisfactory hydraulic testing, disinfection, commissioning etc. complete as per technical specifications and direction of Engineer-in-charge of following class and diameter. (excluding earth work) . Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately.Supply may be in coil or straight length in 6 M/12 M.Rates are exclusive of GST. |
| 3 | HDPE PE-80 PN-6 |
| 4 | 63 mm dia |
| 5 | 75 mm dia |
| 6 | 90 mm dia |
| 7 | 110 mm dia |
| 8 | HDPE PE-100 PN-6 |
| 9 | 63 mm dia |
| 10 | 75 mm dia |
| 11 | 90 mm dia |
| 12 | 110 mm dia |
| 13 | HDPE PE-80 PN-10 |
| 14 | 90 mm dia |
| 15 | 110 mm dia |
| 16 | HDPE PE-100 PN-10 |
| 17 | 90 mm dia |
| 18 | 110 mm dia |
| 19 | Providing, lowering, laying and jointing in trenches, standard lengths HDPE ISI marked Pipes as per IS-4984: 1995 (amended up to date) with necessary jointing material like mechanical connectors, i.e. thread/ insert joint/ quick release coupler joint/ compression fitting joint or flanged joint and specials jointing pipe by butt fusion/ electro fusion welding method, including transportation and freight charges, inspection charges, loading/ unloading charges, stacking of pipes, including cost of labour and material, specials (Tee, bend etc.), satisfactory hydraulic testing, disinfection, commissioning etc. complete as per technical specifications and direction of Engineer-in-charge of following class and diameter. (excluding earth work). Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately.Supply of pipe shall be in straight length in 6/12 M.Rates are exclusive of GST. |
| 20 | HDPE PE-80 PN-6 |
| 21 | 125 mm dia |
| 22 | 140 mm dia |
| 23 | 160 mm dia |
| 24 | 180 mm dia |
| 25 | 200 mm dia |
| 26 | 225 mm dia |
| 27 | HDPE PE-100 PN-6 |
| 28 | 125 mm dia |
| 29 | 140 mm dia |
| 30 | 160 mm dia |
| 31 | 180 mm dia |
| 32 | 200 mm dia |
| 33 | 225 mm dia |
| 34 | HDPE PE-80 PN-10 |
| 35 | 125 mm dia |
| 36 | 140 mm dia |
| 37 | 160 mm dia |
| 38 | 180 mm dia |
| 39 | 200 mm dia |
| 40 | 225 mm dia |
| 41 | HDPE PE-100 PN-10 |
| 42 | 125 mm dia |
| 43 | 140 mm dia |
| 44 | 160 mm dia |
| 45 | 180 mm dia |
| 46 | 200 mm dia |
| 47 | 225 mm dia |
| 48 | Providing, lowering, aligning, fixing in position in pipe line at work site, DI D/F Resilient seated (soft seated) Sluice Valves (Gate Valves) , Vacuum tight(bubble tight), straight and pocket less body passage of approved make of following class & dia complete confirming to BS-EN-1171/ AWWA C-509 and of following specifications: Body & bonnet of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865 or equivalent grade as per IS :3896-part2-1985 and subsequent revisions, Wedge of same material as body & shall vulcanised rubber lined with EPDM (food grade quality) and seals of NBR Face to face dimensions as per BS 5163-89/ IS 14846/2000 (amended up to date) /Din 3202 F4, Stem/ spindle of SS AISI 316/410 Electrostatic epoxy powder(EP-P)/ Fusion bond epoxy ( Non-Toxic- suitable for drinking water) coated with minimum thickness of 250 microns inside and outside, Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367 (Galvanised steel) Insertion rubber of black EPDM 6mm thick. Suitable support structure as per directions of EIC, Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge. Note 1 : Rates are exclusive of tail piece/ dismantling joints and earth work.Note 2 : Rates are exclusive of GST. |
| 49 | Manually Operated Resilient Seated Sluice Valves of Class PN 1.6 |
| 50 | 80 mm dia |
| 51 | 100 mm dia |
| 52 | 125 mm dia |
| 53 | 150 mm dia |
| 54 | 200 mm dia |
| 55 | 250 mm dia |
| 56 | 300 mm dia |
| 57 | 350 mm dia |
| 58 | 400 mm dia |
| 59 | 450 mm dia |
| 60 | 500 mm dia |
| 61 | 600 mm dia. |
| 62 | 700 mm dia. With Gear |
| 63 | 800 mm dia. With Gear |
| 64 | 900 mm dia. With Gear |
| 65 | 1000 mm dia. With Gear |
| 66 | Motorized Sluice Valves with Electric Actuator and integral starter of Class PN 1.0 |
| 67 | 80 mm dia |
| 68 | 100 mm dia |
| 69 | 125 mm dia |
| 70 | 150 mm dia |
| 71 | 200 mm dia |
| 72 | 250 mm dia |
| 73 | 300 mm dia |
| 74 | 350 mm dia |
| 75 | 400 mm dia |
| 76 | 450 mm dia |
| 77 | 500 mm dia |
| 78 | 600 mm dia. |
| 79 | Motorized Sluice Valves with Electric Actuator and integral starter of Class PN 1.6 |
| 80 | 80 mm dia |
| 81 | 100 mm dia |
| 82 | 125 mm dia |
| 83 | 150 mm dia |
| 84 | 200 mm dia |
| 85 | 250 mm dia |
| 86 | 300 mm dia |
| 87 | 350 mm dia |
| 88 | 400 mm dia |
| 89 | 450 mm dia |
| 90 | 500 mm dia |
| 91 | 600 mm dia. |
| 92 | Providing, lowering, aligning, fixing in position in pipe line, DI D/F resilient seated (soft seated) short body pattern type double eccentric Butterfly valves of approved make of following class & dia complete confirming to BS EN 593/ BS 5155/ IS 13095/1991 amended up to date and of following specifications: Body, disc and end cover of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865 or equivalent grade as per IS :3896-part2-1985 and subsequent revisions, Face to face dimensions as per DIN 3202 F4/ IS 13095 Drilled as per IS:1538. Electrostatic Epoxy Powder(EP-P) / Fusion Bonded Epoxy (Non-Toxic & suitable for drinking water) coated with minimum thickness of 250 micron applied on both body and disc inside and outside. Disc seal ring of EPDM/ Neoprene (food grade quality) and disc seal retaining ring of SS/CS. Shaft of SS- AISI- 410/316 & shaft bearings- bronze/ PTET or Teflon with EPDM/NBR \\"O \\"ring seal, Nut-Bolt confirming to IS:1363 and IS: 1367 (Galvanised steel) Insertion rubber of black EPDM 6mm thick. Suitable support structure as per directions of EIC including jointing & jointing material, labour, testing and commissioning along with pipeline as per Technical Specification & as per direction of Engineer-in-charge. Note 1 : Rates are exclusive of tail piece/ dismantling joints and earth work.Note 2 : Rates are exclusive of GST. |
| 93 | Class PN 1.6, Manually Operated with Gear |
| 94 | 100 mm dia |
| 95 | 150 mm dia |
| 96 | 200 mm dia |
| 97 | 250 mm dia |
| 98 | 300 mm dia |
| 99 | 350 mm dia |
| 100 | 400 mm dia |
| 101 | 450 mm dia |
| 102 | 500 mm dia |
| 103 | 600 mm dia |
| 104 | 700 mm dia |
| 105 | 800 mm dia. |
| 106 | 900 mm dia. |
| 107 | 1000 mm dia. |
| 108 | Class PN 1.0, Motorised Operated |
| 109 | 200 mm dia |
| 110 | 250 mm dia |
| 111 | 300 mm dia |
| 112 | 350 mm dia |
| 113 | 400 mm dia |
| 114 | 450 mm dia |
| 115 | 500 mm dia |
| 116 | 600 mm dia |
| 117 | 700 mm dia |
| 118 | 800 mm dia. |
| 119 | 900 mm dia. |
| 120 | 1000 mm dia. |
| 121 | Class PN 1.6, Motorised Operated |
| 122 | 200 mm dia |
| 123 | 250 mm dia |
| 124 | 300 mm dia |
| 125 | 350 mm dia |
| 126 | 400 mm dia |
| 127 | 450 mm dia |
| 128 | 500 mm dia |
| 129 | 600 mm dia |
| 130 | 700 mm dia. |
| 131 | 800 mm dia. |
| 132 | 900 mm dia. |
| 133 | 1000 mm dia. |
| 134 | Providing, lowering, aligning, fixing in position in pipe line, DI resilient seated (soft seated) Concentric Wafer type, Butterfly valves of approved make of following Pressure rating & dia complete confirming to BS EN 593/ BS 5155/ IS 13095/1991 amended up to date and of following specifications: Body- Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865 or equivalent grade as per IS :3896-part2-1985 and subsequent revisions, Disc - DI (same as body material) / CS, Face to face dimensions as per DIN 3202 F4/ IS 13095 , Flanges Drilled as per IS:1538 ,Electrostatic Epoxy Powder(EP-P) / Fusion Bonded Epoxy (Non-Toxic & suitable for drinking water) coated with minimum thickness of 250 micron applied on both body and disc inside and outside . Liner & Disc seal - EPDM/ Neoprene (food grade quality) ,Shaft of SS- AISI- 410/420 & shaft bearings- bronze/ PTET or Teflon with EPDM/NBR \\"O \\"ring seal , Nut-Bolt confirming to IS:1363 and IS: 1367/ Galvanised steel, Insertion rubber of black EPDM 6mm thick ,Suitable support structure as per directions of EIC including jointing & jointing material, labour, testing and commissioning along with pipeline as per Technical Specification & as per direction of Engineer-in-charge. Note 1 : Rates are exclusive of tail piece/ dismantling joints and earth work.Note 2 : Rates are exclusive of GST. |
| 135 | Class PN 1.6, Wafer Type |
| 136 | 80 mm (Lever Operated) |
| 137 | 100 mm (Lever Operated) |
| 138 | 125 mm (Lever Operated |
| 139 | 150 mm (Lever Operated) |
| 140 | 200 mm (with Gear) |
| 141 | 250 mm (with Gear) |
| 142 | 300 mm (with Gear) |
| 143 | Providing, lowering, aligning, fixing in position in pipe line, DI D/F resilient seated (soft seated) Swing type Non Return Valve of approved make of following Pressure rating & dia complete, generally confirming to IS: 5312 (part -1)/ 2004 (amended up to date) and of following specifications: Body, Bonnet & disc of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865 or equivalent grade as per IS :3896-part2-1985 and subsequent revisions, Face to face dimensions as per IS 5312 (part -1):2004 Drilled as per IS:1538. Electrostatic Epoxy Powder(EP-P) / Fusion Bonded Epoxy (Non-Toxic & suitable for drinking water) coated with minimum thickness of 250 micron applied on body, cover and disc inside and outside . Disc seal ring of EPDM/ Neoprene (food grade quality) and disc seal retaining ring of SS/CS.Shaft of SS- AISI- 410, Hinge SS AISI 316/410 ,Bonnet Gasket EPDM ,Bush- Brass with EPDM/NBR \\"O \\"ring seal Nut-Bolt confirming to IS:1363 and IS: 1367 (galvanised steel) Insertion rubber of black EPDM 6mm thick. Suitable support structure as per directions of EIC including jointing & jointing material, labour, testing and commissioning along with pipeline as per Technical Specification & as per direction of Engineer-in-charge. Note 1 : Rates are exclusive of tail piece/ dismantling joints and earth work.Note 2 : Rates are exclusive of GST. |
| 144 | Class PN 1.6 |
| 145 | 80 mm dia |
| 146 | 100 mm dia |
| 147 | 125 mm dia |
| 148 | 150 mm dia |
| 149 | 200 mm dia |
| 150 | 250 mm dia |
| 151 | 300 mm dia |
| 152 | 350 mm dia |
| 153 | 400 mm dia |
| 154 | 450 mm dia |
| 155 | 500 mm dia |
| 156 | 600 mm dia |
| 157 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches of required width and gradient for laying and jointing of pipe line including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 Mtr. including taking out the excavated soil, and then returning the soil as required in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposal of surplus excavated soil as directed within a lead of 50 Mtr. including required all safety provisions etc.:All kinds of soilRate is exclusive of GST. |
| 158 | Add extra for trenches for every additional lift over item no 4.1Rates are exclusive of GST. |
| 159 | Above 1.5 mtr and up to 3.0 mtr. |
| 160 | Above 3.0 mtr and up to 4.5 mtr. |
| 161 | Dismantling of flexible pavement for pipe line and chambers by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. Measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks per technical specification and scope of work.Rates are exclusive of GST. |
| 162 | Bituminous courses |
| 163 | Granular courses |
| 164 | MS Specials |
| 165 | Providing and fixing of flanged/ plain ended MS Specials made from MS sheet strips of relevant IS specification of approved thickness by welding, lowering, laying, aligning, fixing in position at all level/ depths in trenches complete material, labour, inside lining, outside coating, testing and commissioning along with pipe line as per technical specifications and direction of Engineer-in-charge.Rates are exclusive of GST. |
| 166 | MS pipe specials up to 600mm dia (with minimum 5mm thickness sheet) |
| 167 | MS pipe specials above 600mm dia(with minimum 6.3mm thickness sheet) |
| 168 | Providing, lowering, aligning, fixing in position in pipe line, CI D/F Sluice valves straight and pocket less body passage of approved make of following Pressure rating & dia complete, confirming to IS:14846 (amended up to date) and of following specifications: Body, Bonnet, Wedge, Gland, Thrust Plate, Cap & Hand wheel of Grey cast iron of IS:210/ FG200 Stem - AISI- 410 ,Body Seat ring, Wedge facing ring & Bushes - LTB2/ SS , Face to face dimensions as per IS 14846/2000 (amended up to date) ,Epoxy ( Non-Toxic- suitable for drinking water) applied inside and outside, Flanges Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367/ CS/ galvanised steel Insertion rubber of black EPDM 6mm thick . Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge. Note 1 : Rates are exclusive of tail piece/ dismantling joints and earth work.Note 2 : Rates are exclusive of GST. |
| 169 | Manually Operated CI Sluice valve of Class PN-1.0 |
| 170 | 80 mm HW |
| 171 | 100 mm HW |
| 172 | 125 mm HW |
| 173 | 150 mm HW |
| 174 | 200 mm HW |
| 175 | 250 mm HW |
| 176 | 300 mm HW Please Enable Macros to View BoQ information |
