|
| 1 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. The Contractor has detect defferent utilities like sewer line, water supply line electric cable, Telephone cable, Gas pipe line etc, using utility detecting machine before start of excavation and shall start excavation only after getting prior permission of E/I. All kinds of soil. 0 to 1.50 m |
| 3 | Extra for every additional lift of 1.5 m or part thereof in excavation /banking excavated or stacked materials. All kinds of soil.for 1.5 - 3.0 M depth |
| 4 | Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes (DI) conforming to IS : 8329 :800 mm dia Ductile Iron Class K-9 pipes |
| 5 | P/F M.S. specials such as Tee , Bends , Collars , Tapers, Gap pieces,including Flange Ends as required , Painting ,Cutting, welding as per site requirement of MS pipe thickness etc complete in all respect as per direction of E/I. |
| 6 | P/F C.I. double acting air valve of approved quality with bolts, nuts, rubber insertion etc. complete (the tail pieces tapers etc. if required witll be paid separately) a) 80 mm dia. |
| 7 | Hiring of Generator set (Including Service cost of operating staff, supply of lubricating oil and diesel also) D.G. Set/Generator of 63 KVA |
| 8 | Hiring of Welding Set Running Time @ 6 Hrs/Day (Including Service cost of operating staff, supply of suitable electrodes etc). |
| 9 | Hiring of Gas cutting set with oxygen and LPG Running time @ 6 Hrs/Day (Including Service cost of operating staff, supply of necessory items as oxygen & LPG etc). |
| 10 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 11 | Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as perdirection of the Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/ cum.Excess/less cement used as per design mix is payable/recoverable separately). All works upto plinth level. |
| 12 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50m and lift up to 1.5 m. same earth work |
| 13 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 14 | P/F Reflex Valve shall generally conform to IS 14846 with latest amendment , with length over flanges as per PD of IS 14846 corresponding to BS EN – 558 / ISO 5752 Basic Series 3 in CI construction having metal seating (IS 318 Gr. LTB 2) with complete Component & Material of construction as following below :-1 - Body / Door / Dome - Cast Iron IS 210 Gr. FG 260, 2 - Spindle - Non rising; Stainless Steel AISI 410, 3 - Body seat / Door face - Gun metal: IS 318 Gr. LTB 2 (rings to be press fitted and riveted; no screws allowed), 4 - Rivets - Soft annealed brass,5- Spindle Nut - Gun metal: IS 318 Gr. LTB 2, 6 - Stem seal - Greased Hemp, 7 - Fasteners - Carbon steel, 8 - Flange Drilling - IS 1538 Table 4 & 6, 9 - PN- 1.0 10 - Accessories (400 mm and above) - Ball thrust bearings to be housed above the wet chamber ie. above the gland. Enclosed Spur Gear Box for ease of operation. Air Plug, 11 - Painting / Coating - Inside & Outside epoxy liquid coated; DFT minimum 250 micron, shade RAL 5005 / 5015 (BLUE), 12 - Hydro-test - (Open Ended only) Seat: 10 / 16 Kg/cm2; Body: 15 / 24 Kg/cm2 13 -Upto 600 mm dia Manual Operated & above 600 mm Gear box Make- Indian Valve Pvt. Ltd. (IVC) / Kirloskar Brothers Limited (KIRLOSKAR) 600 mm dia |
| 15 | P/F Sluice Valve shall generally conform to IS 14846 with latest amendment , with length over flanges as per PD of IS 14846 corresponding to BS EN – 558 / ISO 5752 Basic Series 3 in CI construction having metal seating (IS 318 Gr. LTB 2) with complete Component & Material of construction as following below :-1 - Body / Door / Dome - Cast Iron IS 210 Gr. FG 260, 2 - Spindle - Non rising; Stainless Steel AISI 410, 3 - Body seat / Door face - Gun metal: IS 318 Gr. LTB 2 (rings to be press fitted and riveted; no screws allowed), 4 - Rivets - Soft annealed brass,5- Spindle Nut - Gun metal: IS 318 Gr. LTB 2, 6 - Stem seal - Greased Hemp, 7 - Fasteners - Carbon steel, 8 - Flange Drilling - IS 1538 Table 4 & 6, 9 - PN- 1.0 10 - Accessories (400 mm and above) - Ball thrust bearings to be housed above the wet chamber ie. above the gland. Enclosed Spur Gear Box for ease of operation. Air Plug, 11 - Painting / Coating - Inside & Outside epoxy liquid coated; DFT minimum 250 micron, shade RAL 5005 / 5015 (BLUE), 12 - Hydro-test - (Open Ended only) Seat: 10 / 16 Kg/cm2; Body: 15 / 24 Kg/cm2 13 -Upto 600 mm dia Manual Operated & above 600 mm Gear box Make- Indian Valve Pvt. Ltd. (IVC) / Kirloskar Brothers Limited (KIRLOSKAR) 600 mm dia |
| 16 | 800 mm dia with gear box |
| 17 | Supply, Erection, Testing and Commissioning of Non Clog Sewage Submersible pump set complete in all respect as per direction of engineer in-charge. Technical specification of pump set shall be as given below. 1. Motor type:- Sq. cage induction motor 960 rpm suitable for operation on 400/440 volts 3 phase, 50 hz AC supply with F class insulation & IP-68 protection. 2. Pump:- a) Body - cast iron with 2% nickel b) Impeller- cf8m(ss316) c) Shaft- stainless steel (ss304) d) Auto coupling stand-cf8m (ss316) e) Guide pipe- Stainless steel (ss304) @16 mtr f) Lifting chain - alloy steel @16 mtr g) Mechanical seal- Upper seal (carbon/chrome steel) & Lower seal (silicon carbide). 3. Field requirement:-a) Type: non clog sewage submersible pumpb) Impeller Suction Type : End suction c) RPM: 960 d) Head: 28 mtr e) Copper cable for sewage submersible pump @ 25mtr f) Specific gravity of sewage:1.07 g) Solid handling capacity (dia) not less than 100 mm. Note-Contractor shall be submitted G.T.P. & all company test certificate of the material used in pump set. (Make- Pullen pump industries Pvt ltd / Aqua Machineries pvt. ltd. /Kishor pumps Pvt. ltd. ) Non Clog Sewage Submersible Pump set discharge 1300 m³/hr., Head - 28 mtr, Rating 165/220, Outlet size of pipe 300 mm dia, Cable- 2 x70 sqmm x 3.50 core + 1.50 sqmm x 4.0 core |
| 18 | PVC Flexible cables copper conductor 1100 V conforming to 694/1990 double sheathed circular rate including excise duty, sales tax (make - Tridev Electricals /Uttam Engineering Works / Sweta Electricals) 70 Sqmm X 4 Core |
| 19 | S/F 1250 Amp ACB,4 pole, EDO with Microprocesser release (Make-L&T, C-Power/ D-Sine) / Siemens (3WL/VL)/ Schnieder (Masterpact/Nzx) only for STPs |
| 20 | S/F of Ampere meter (Make-AE/Procom/Conzerve) |
| 21 | S/F of Volt meter (Make-AE/Procom/Conzerve) |
| 22 | S/F of Indicating light (Make-Esbee Siemens / Schnieder)) |
| 23 | S/F of Indicating light (Blue & White) Make-Esbee Siemens / Schnieder) |
| 24 | S/F of ASS (Make-Salzer/Kaycee) |
| 25 | S/F of VSS (Make-Salzer/Kaycee) |
| 26 | S/F of Push Button (Make-Esbee Siemens / Schnieder) |
| 27 | S/F of No contact Block (Make-Esbee Siemens / Schnieder) |
| 28 | S/F of NC contact Block (Make-Esbee Siemens / Schnieder) |
| 29 | S/F of Cylindrical Type Heavy duty Mpp Capacitor 5 KVAR @ 397 per KVAR) ((Make-L&T/Siemens / Schnieder) |
| 30 | S/F of Cylindrical Type Heavy duty Mpp Capacitor 10 KVAR @ 397 per KVAR) ((Make-L&T/Siemens / Schnieder) |
| 31 | S/F of Cylindrical Type Heavy duty Mpp Capacitor 15 KVAR @ 397 per KVAR) ((Make-L&T/Siemens / Schnieder) |
| 32 | S/F of CT 100/5A, 150/5A, 200/5A, 300/5A, 400/5A & 600/5A (AE Class-I) ((Make-AE/KAPPA/NORTEXr) |
| 33 | S/F of 3 Pole Power contactor AC3 300Amp. ((Make-L&T/Siemens / Schnieder) |
| 34 | S/F of 3 Pole Power contactor AC3 400Amp. ((Make-L&T/Siemens / Schnieder) |
| 35 | S/F of APFCR Relay 5Amp, 415V 12 Stage (Make-L&T/Siemens / Schnieder) |
| 36 | S/F of Under Voltage coil (Make-L&T/Siemens / Schnieder) |
| 37 | S/F of Shunt coil (Make-L&T/Siemens / Schnieder) |
| 38 | S/F of 6A, 10A, 16A, 20A, 25A, 32A 4 Pole MCB, 10KA (Make-L&T/Siemens / Schnieder) |
| 39 | S/F of 63A 4 Pole MCB, 10KA (Make-L&T/Siemens / Schnieder) |
| 40 | Supply and burying earth electrode for lighting conductor of 600mm x 600mm x 6mm G.I. plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe for watering funnel, 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineerin- charge complete in all respect. Please Enable Macros to View BoQ information |
