Tender For special Repair For Roof Treatment For Leakage/Seepage In Affected Md Accn Of Jhansi Stn And special Repair Of Projector Room Of Wtsi Institue Under Age Br-Ii At Ge Jhansi
Tender Value
46.39 Lakhs
Estimated cost
Bid Submission
16 Jul 2026
8 days left
EMD
92780
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jhansi → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair For Roof Treatment For Leakage/Seepage In Affected Md Accn Of Jhansi Stn And special Repair Of Projector Room Of Wtsi Institue Under Age Br-Ii At Ge Jhansi
BOQ
| Sl. No. | Item Description |
| 1 | Removing existing water proofing treatment by brushing with wire brush, cleaning of terracing by taking down cement concrete, existing plaster lime cova, mud phuska/ cement concrete/lime coba etc, cleaning of all foreign material such as fungus mass dust etc, roughing surface of corner to roof by wire brush complete all as specified and directed. |
| 2 | M&L water proofing treatment to roof slab with APP based modified polymeric membrane centre core 100 microne HMHDPE outer flim 20 micron, five layer polymeric membrane 3mm thick weight not less than 3kg/Sqm with 100mm overlap laid as per manuacturer's instructions complete all as specified and as directed by Engineer-in-Charge with following course of description below:- (a) 1st coat applying bitumen primer confirming to IS-3384-1965 @ 0.40 Kg/Sqm to be applied on prepared roof surface till the surface is properly impregnated(b) 2nd coat of bonding material using blown type bitumen conforming to IS-702 of grade 85/25 @ 1.20 Kg/Sqm(c) 3rd course of laying of APP Based modifiedpolymeric membrane with 100mm overlap in longitudinal direction and 150mm in transverse direction and edges to be taken up to vertical wall of 20cm height inserted into the vertical wall concealed the joints with bitumen sealed. All joints and changes in all direction should be covered with cement mortar (1:3) mixed with SBR latex @ 200ml per bag of cement and cured well before laying the membrane.Note:- (i) The work shall be executed through authorised applicator of main manufacturer as approved by GE.(ii) Top layer of Aluminium paint or cement concrete tiles shall be measured and paid under seperate item. |
| 3 | M&L for Applying a coat of bituminous aluminium paint @ 0.20 Kg/Sqm over APP membrance, complete all as specified and directed |
| 4 | M&L for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in roof kerbs or mud stops round or chamfered on edges complete all as specified and directed. |
| 5 | M&L for 10 mm thick rendering in CM (1:4) mixed with water proofing compound @ 0.20 Ltr/bags on roof surface after removing all dust and cleaning the surface with water through jet spray complete all as specified and directed. |
| 6 | Supply only liquid water proofing compound, mixed in CM as per manufacturer instruction, complete all as specified and directed. |
| 7 | S&F of rotational moulded polyethylene cylindrical vertical with closed top water storage tank triple layered WHITE COLOUR 500 Ltr capacity with connecting nipple, hoisted and fixed in position on new or existing foundation and making GI tubing inlet or outlet connection, with and incl disconnecting and dismantling the existing un-serviceable PVC/RCC water tank on top of roof/slab of bldgs, complete all as specified and directed. |
| 8 | S&F of rotational moulded polyethylene cylindrical vertical with closed top water storage tank triple layered WHITE COLOUR 1000 Ltr capacity with connecting nipple, hoisted and fixed in position on new or existing foundation and making GI tubing inlet or outlet connection, with and incl disconnecting and dismantling the existing un-serviceable PVC/RCC water tank on top of roof/slab of bldgs, complete all as specified and directed. |
| 9 | Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning etc. and hoisting, reconnecting and re-fixing in position of exc. 250 litres & not exc. 500 litres capacity of tanks,Date of cleaning of tank will be marked on the tank by stencil with synthetic enamaled paint in uniform size, Size of letters & numbers should be 40mm. complete all as specified and directed. |
| 10 | Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning etc. and hoisting, reconnecting and re-fixing in position of 1000 litres capacity of tanks, Date of cleaning of tank will be marked on the tank by stencil with synthetic enamaled paint in uniform size, Size of letters & numbers should be 40mm. complete all as specified and directed. |
| 11 | S&F in replacement of 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed. |
| 12 | S&F in replacement of 20 mm dia of Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iorn pipe and fixed. (minium weight 20 mm-210 gms) etc, complete all as directed. |
| 13 | Demolition of cement concrete of any description and in any position of WC’s/Bathroom etc in sunken portion area above ground floor, removing demolished material completely and old waste pipe from sunken portion and cleaning the side/bottom surface of sunken floor with wire brush, complete all as specified and directed. |
| 14 | M&L for application/forming of waterproofing liquid membrane moistening the prepared surface for proper dispersion and penetration and applying two component cementitious elastomeric water proofing coating damp block 2k as per manufacturers specifications. The treatment shall be carried out to the entire bottom surface and vertical surface upto the bottom height of wall tiles. Adequate curing to be done on vertical surfaces and ponding test for 48 hours on the bottom surface to be carried out complete all as specified and directed. |
| 15 | M&L for 25 mm thick PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in padding levelling etc and roof kerbs with liquid water proofing solution finished even and fair with proper slope as prepatory works to water proofing treatment complete all as spd and directed by EIC.Note:-liquid water proofing solution shall be provided in 150ml in 50 Kg of Cement by weight and cost of liquid water proofing solutionmeasured and paid under seperate item complete all as directed. |
| 16 | M&L PCC 1:5:10 Type E2 using 40mm graded stone aggregate as in mass filling in two layer in sunken portion complete all as spd and directed |
| 17 | M&L 10mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 floor finising with WPC finished even & smooth complete all as specified and directed.Note:- liquid water proofing solution measured and paid seperate item complete all as specified and directed. |
| 18 | M&L 50mm dia G.I pipe as in spout to drain out if any leakage occures in the sunken portion complete all as spd |
| 19 | S&F Vitreous China squatting pan, 'Orissa pattern', size 580x440mm, white, with integral foot rests including cast iron 'P' or 'S' trap, excluding flushing cistern and flush pipe, including connection to trap and flushing pipe etc. and making good to floor complete all as specified and directed. |
| 20 | Supply & Fix in repairs Vitreous China wash down water closet pan (pedestal pattern), EWC, coloured including jet system & matching coloured seat cover fixed complete all as specified. |
| 21 | Supply and Fixing 10 Litres, PVC, valve less, syphonic action type, Flushing Cistern, low level, white inlet, ball valve, float, chain and pull, and brackets including PTMT PVC connection 600mm long and PVC 32 mm dia flush pipe. |
| 22 | S&F 15 mm bore Galvanized Steel tubes, medium grade with fittings fixed to walls and ceilings or laid in floors, concealed or open incl cutting of grooves Including taking down old GI pipe & Fitting all as specified and directed |
| 23 | S&F 20 mm bore Galvanized Steel tubes, medium grade with fittings fixed to walls and ceilings or laid in floors, concealed or open incl cutting of grooves Including taking down old GI pipe & Fitting all as specified and directed |
| 24 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and directed. |
| 25 | M & L for Non- skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed/ bedding layer in CM (1:6) complete all as specified and as directed. |
| 26 | M&L for Glazed ceramic coloured tiles invertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match tiles with and including 10 mm thick rendering in CM (1:4) for receiving the tiles, complete all as directed. |
| 27 | Taking down of eaves gutter and rain / waste water pipes including all fittings any size and pattern, complete all as specified and directed. |
| 28 | S&F for 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 29 | S&F for 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 30 | S&F for 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 31 | S&F for 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 32 | S&F 110 mm bore PVC (SWR) bends of any radius, complete all as specified and directed. |
| 33 | S&F 75 mm bore PVC (SWR) bends of any radius, complete all as specified and directed. |
| 34 | S&F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal, complete all as specified and directed. |
| 35 | S&F 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal, complete all as specified and directed. |
| 36 | S&F PVC (SWR) vent cowl 75mm bore, jointing to waste pipe, complete all as specified and directed. |
| 37 | S&F PVC (SWR) vent cowl 110mm bore, jointing to waste pipe, complete all as specified and directed. |
| 38 | S&F PVC (SWR) floor trap of 75 mm outlet, jointing to waste pipe, complete all as specified and directed. |
| 39 | S&F PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement, complete all as specified and directed. |
| 40 | Demolition of brick work built in cement mortar or lime mortar including all quoins arches, pillars etc complete all as specified and directed. |
| 41 | M&L for Brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6.00m mean radius built in cement mortar (1:6) complete all as specified and directed. |
| 42 | M&L for half brick wall with sub class 'B' bricks (old size) straight or curved on plan to any radius built in cement mortar 1:4, complete all as specified and directed. |
| 43 | Taking down cement plaster on brick or stone wall,dado and skirting etc including racking out joints hacking for key scrubbing down with water etc, complete all as specified and directed. |
| 44 | M&L for 15mm rendering thick in CM (1:4) on fair faces of brick work/concrete surfaces finished even & smooth (without using extra cement), complete all as specified and directed. |
| 45 | M&L for preparation of primed surfaces of wall / ceiling and applying one coat of premium external emulsion paint of VOC less than 50 and with silicon additives, dust and water repellent properties complete all as specified and directed. |
| 46 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 including demolition of existing PCC Platform complete all as specified and directed. |
| 47 | M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed |
| 48 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick AZ 150 of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 49 | S&F for pre-painted 0.50mm thick Gavalume Aluminium Zinc coating GI based plain steel sheet of any colour having tensile strength 550 MPa and AZ 150 grade as in roof covering/cladding to walls, fixed with self tapping screws, complete all as specified and directed. |
| 50 | S&F mild steel (Fe 410W, Gde E 250) as roof trusses (framed), trussed, purlins, crane gantries ,rails and fastenings and heavy brackets framing (beams, tee, angle, channels or flat sections) etc complete all as specified and directed . |
| 51 | M&L for 10 mm thick rendering in CM (1:6) on fair/other than fair faces of brick work finished even and fair complete all as specified and directed. |
| 52 | M&L for rendering 5mm thick plaster in CM (1:3) on concrete surface of ceiling finished even & smooth (without using extra cement) complete all as specifiied and directed. |
| 53 | M&L Plain Cement Concrete type B-1 1:2:4 (using 20mm graded aggregate) as in Coping benching etc complete all as specified and directed. |
| 54 | M&L for prepration of surfaces of wall / ceiling and applying Two coats of ( weather proof coat exterior paint) over a coat of exterior primer complete all as specified and directed. |
| 55 | Prepration of new surfaces of wall and applying two coats of oil bound emulsion distemper over a coat of primer complete all as specified and directed. |
| 56 | M&L for 75mm thick PCC 1:3:6 type C-2 using 40 mm graded crushed stone aggregate as in plinth protection or similar places, and finishing the surface even and smooth without using extra cement including making joints 12mm wide to the full depth of PCC at every 3 meters and at every change of direction and filling the same with sealing compound grade 'A' including necessary formwork etc and including demolition of existing old cement concrete complete all as specified and directed |
| 57 | M & L for Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean,free from dust, loose paint etc by skilled labour complete all as specified and directed. |
| 58 | M&L for applying wall care putty @ 1 Kg(undiluted) per sq mtr. of average thickness 1 mm over the plastered/old painted wall complete all as specified and directed. |
| 59 | M&L for applying two coats of oil bound distemper on walls, white or tinted using applying over a coat of chalk whiting primer complete all as specified and directed. |
| 60 | M&L for preparation of old painted wooden surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed. |
| 61 | M&L for preparation of old painted steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed. |
| 62 | M&L for mild steel section as in door/windows chowkhats frame of steel gate of grade Fe-290 gde E-165 including all necessary machine wks i.e. cutting, welding, grinding etc, complete all as specified and directed. |
| 63 | M&L for box type steel window and Ventilator with 80x40x1.25 m MS tubular frame with side hung shutters ( double shutter for glass and gauze) without sash bars jointed together with and incl grill using 12 mm square bar @ 10 cm C/C incl box type hinges with steel handle and steel pag stay complete glazing bars doweled and welded complete all as specified as directed. Note:- (a) The Glass / gauze shell be measured and paid separately. (b) Side hung Z-Section shutter shall be of size 20mm x 20mm x 25mm and 0.3mm thick. |
| 64 | S&F of 3 mm thick sheet glass ordinary quality and glazing type, not exc 0.50 sqm in each pane, duly fixed with oil putty or wooden bidding as required, complete all as directed. |
| 65 | S&F of stainless steel wire cloth 0.36 mm in nominal dia of wire average width of aperture 1.40 mm and fixed with tinned tacks of stainless steel wire staples to steel shutters or fixed with wooden beads to wooden joinery, complete all as specified and directed. |
| 66 | S&F of 35mm thick factory made modular designer flush doors, solid core construction, with block board core and prelamination on both sides, complete all as specified and directed. |
| 67 | Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area n exc 1.5 Sqm each complete all as specified and directed |
| 68 | Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area .exc 1.50 sqm and n exc 4.00 sqm each complete all as specified and directed |
| 69 | S&F butt hinges, 100mm long, medium weight, cold rolled, mild steel complete all as specified and directed. |
| 70 | S&F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed |
| 71 | S&F 150mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 72 | S&F 150mm long aluminium anodized, barrel tower bolts of extruded section complete all as specified and directed |
| 73 | M&L for light shade Vitrified ceramic coloured tiles 8 to 10mm thick (Square or rectangular) polished,area of each tile not exceeding 0.36 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in same colour grout to match over and including 15 mm thick screed bed or bedding layer in CM 1:6 including dismantling floor hearth or wall tiling including cement mortar bedding complete all as specified and directed. |
| 74 | M&L for Glazed ceramic coloured tiles of size 350 mm x 250 mm x 7mm / 450x350x7mm thick, as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in same colour grout to match with and including 10 mm thick rendering in cement mortar 1:4 finished rough surface to receive tiles including dismantling of existing wall tiling including cement mortar bedding and removing rubbish off the premises complete all as directed. |
| 75 | M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granit including cutting chasing in brick work and half rounding of granite edges in front face of self including 15 mm screed bed in cement motar (1:4) including demolation of stone slabs any thickness complete all as specified and directed. |
| 76 | S&F in replacement of pillar taps, 15 mm dia, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with long screwed shanks and fly-nuts, complete all specified and directed. |
| 77 | S&F in replacement of fancy type long body bib cock, 15 mm dia with wall flange made of cast copper alloy, chromium plated, complete all as specified and directed. |
| 78 | S&F in replacement of bottle trap 32 mm sizewith 250 mm long wall connection pipe and wall flange made of cast copper alloy, chromium plated fancy type, complete all as specified and directed. |
| 79 | S&F SS grating of square/round shape, overall size of 150x150mm with hinge type openable jali of 100 mm dia size with and incl fixing with CM to floor/nahani traps etc, complete all as specified and directed. |
| 80 | Cutting chases, pining in, making good to facings where reqd and pointing in cement motor (1:3) to ends or edges of landings, steps, cills, sunsheds, shelves, lintels, etc, and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good exceed 20 cm girth in brick walls complete all specified and directed |
| 81 | M&L for form work to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work n exc 200mm thick complete all as specified and directed |
| 82 | M&L for RCC (Nominal Mix) type B1, 1:2:4 (20 mm stone agg) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 83 | M&L for mild steel TMT bars 6 to 8mm dia bars cut to length bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends end binding with mild steel wire (annealed) n. less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 84 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips |
| 85 | Taking down carefully existing copper/aluminium point wiring (light, fan, socket or power) complete of any description including fitting such as switches, ceiling roses, pendants, tube light fitting, regulators, sockets, bell push and call bell wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces of walls, floors, ceiling etc with cement plaster, putty and paint to match with the existing surface complete all as specified and directed. |
| 86 | M&L for point wiring for Modular fittings complete with 1.5 Sqmm FRLS insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core conforming to IS:694 along with one run of 1.5 Sqmm FRLS insulated copper conductor cable green in colour for continuous earthing drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm(OD), concealed in wall/ floor etc including provision of Modular cover plates with frames and 1.50 sq mm PVC insulated unsheathed stranded copper conductor (FRLS) cable for common earth and connecting to earth dolly all as specified and directed by Enrg-in-charge. (Note- rates of chasing/cutting & making goods shall be included in the unit rate) :- |
| 87 | One light point/ceiling fan/exhaust fan controlled by one switch |
| 88 | One 6A socket point controlled by one switch on independent board |
| 89 | One 6A socket point controlled by one switch on same board |
| 90 | All as per srl item no. 86 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for one 16 Amp socket point controlled by one 16 Amp switch on independent board. |
| 91 | S&F of Modular switch 1 way 6A, 1 module 240V, 50Hz complete all as specified and directed. |
| 92 | S&F Fan step regulator, 120W - 2 module, 240V, 50Hz ISI marked with valid CML complete all as specified and directed. |
| 93 | S&F of Modular Socket, 6A - 2/3 pin combined 2 module 240V, 50Hz complete all as specified and directed. |
| 94 | S&F of Modular switch 1 way 16A, 1 module 240V, 50Hz complete all as specified and directed. |
| 95 | S&F of Modular Socket 6A/16A - 2/3 pin combined 2 module 240V, 50Hz complete all as specified and directed. |
| 96 | S&F of Modular blank plate 1 module complete all as specified and directed. |
| 97 | S&F angle holder, metal cased, bakelite body, 240 volts, ISI marked with valid CML complete all as specified and directed. |
| 98 | S&F Ceiling rose, three terminals, bakelite body, 240 volts, ISI marked with valid CML complete all as specified and directed. |
| 99 | Taking down light fitting of any capacity and any size and in any position complete all as specified and directed. |
| 100 | S&F LED Tube light fitting batten type 20W, 230W, efficiency 120 Lumens per watt, colour temperature 6500k (Cool White), Power factor grater than 0.9, Polycarbonate body, CRI 80, IP Rating, IP 20, THDv with in 5 % and THDi (8-10%) and integrated Electronic driver complete with al accessories internally Pre-wired and including connecting with 3 Core twisted flexible copper conductor cable of suitable size from celling rose all as specified and directed.Notes:- (i) The rate of three core twisted flexible copper conductor cable of suitable size for connection is included in this item and noting shall be paid extra on this account.(ii) Warranty for replacement of each LED lite fitting shall not be less than 2 years from the date of purchase.(iii) Date of purchase shall be marked on each fixture with permanent marker for redeeming warranty benefits. |
| 101 | Supply and fix LED building security light fitting 35 watts, Luman efficacy of LED 140 lm/W, PF>0.95 THD<10%, colour temperature 6500K CRI > 7, system luman not less then 2600 lm, made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens with toughed glass having bottom separate driver compartment with IP 65 protection and impact resistant of IK 07 etc and all accessories previewed complete including mounting bracket of GI Pipe 40mm inner dia light grade of reqd length and shape including bending, forging or welding etc and suitable bolts and nuts with washers, including connecting with PVC insulated multistandered cooper flexible cable of size 0.5sqmm 3 core form celling rose to fitting all as specified and directed. Notes:- (i) The rate of three core twisted flexible copper conductor cable of suitable size for connection is included in this item and noting shall be paid extra on this account.(ii) Warranty for replacement of each LED lite fitting shall not be less than 2 years from the date of purchase.(iii) Date of purchase shall be marked on each fixture with permanent marker for redeeming warranty benefits. |
| 102 | Supply and fix Electric Water Heater storage type, vertical, 25 Ltrs capacity, 5 Star rated, with heating element, PUF insulation, multifunction safety valve, adjustable knob for temperature setting and Strainless steel inner tank and outer body suitable for operating on 230V, 50 Hz, single phase AC supply including hot & cold water PVC connections and mounting on wall with suitable size & No. of anchor bolts complete all as specified and directed. |
| 103 | Supply and fix modular MCB protected plug and socket board in sheet steel enclosure with 20A rated mini MCB and 20A rated 3 pin plug, 240 V, 50 Hz complete including cutting the wall surfaces for flush mounting of socket board and making good with cement plaster, putty and paint to match with the existing surface all as specified and directed by Engineer-in-Charge. |
| 104 | S&F of ceiling fans complete with blades, down rods, (with remote) and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM, Five star rated with brushless direct current motor (BLDC) including connection with 1.5 sqmm, three core copper wire from ceiling rose complete all as specified and directed by Engineer-in-Charge. |
| 105 | Supply and fix of exhaust fan with steel body 300mm sweep with blade , with louvers shutter, voltage 230V, 50HZ, RPM 1200, Copper winding including connection with 1.5 sqmm, three core copper wire from ceiling rose to exhaust fan upto 1 mtr length including fixing on ventilator complete all as specified and directed by Engr-In-Charge. |
| 106 | Supply and fix Air Circulator fan 230 Volts Single Phase oscillating 450 mm sweep suitable for wall mounting complete. |
| 107 | Taking down unserviceable Sheet metal box & MCB DB SPN with MCB's of any make/capacity complete all as specified and directed by Engr-in-Charge. |
| 108 | Supply and fix MCB distribution board, SPN, 8 way 230 Volt in sheet steel powder painted enclosure double door type with IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface all as specified and directed by Engineer-in-Charge. Note: MCBs shall be measured and paid separately. |
| 109 | S&F MCB SPN 40-63 Amp, 240 V with breaking capacity 10 KA, 'C' series complete all as specified and directed. |
| 110 | S&F MCB SP 6-32 Amp, 240 V with breaking capacity 10 KA, 'C' series complete all as specified and directed. |
| 111 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6.0 sq mm 4 core complete. |
| 112 | Taking down old U/S earthing and M&L for Earthing complete with galvanised iron earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connecting to GI wire 4 dia mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel and earth wire protected by 15mm dia GI pipe medium grade and connected to distribution board/earthing test point all as shown in electircal plate No. 3 of SSR Part-I(2009) and testing on completion complete all as specified and directed. Note :- The unit rate quoted shall also include for excavation, earth work in any type of soil, plain cement concrete 1:3:6 mix, Type C1 pit, 40mm thick RCC 1:2:4 mix type B1 cover reinforced with 8mm dia TMT bras @ 150mm C/C both ways, GI funnel with watering pipe, wire mesh,protection pipe, earth wire upto 7.50m long complete in addition to item No. 1(a) to (e) of preamble (Notes) under sub heading earthing, specified in SSR Part II. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysJul 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender