Tender For Repair/ Replacement Of Dosing Pumps, Filter Media, Pump Sets, Motor Starters And Misc Works At Afs Kumbhirgram.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
06 Jul 2026
0 days left
EMD
42000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Cachar → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Replacement Of Dosing Pumps, Filter Media, Pump Sets, Motor Starters And Misc Works At Afs Kumbhirgram.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling and taking down squirrel cage induction motor assembly (10 HP), 3Ph, 415V for heating, varnishing of motor winding, remetaling of shaft and replacement of bearing etc. including disconnection of cable, earthing strip etc carrying of pumping set to Silchar work shop from Kumba Pump house including loading/unloading and bringing back to same location after repair and testing at site with proper coupling and alignment, complete all as specified and directed. |
| 2 | All as per item No. 1.00 here-in-before, but of capacity 40-50 HP, the motor to be taken to Silchar workshop from Kumbha Pump House, complete all as specified and as directed. |
| 3 | All as per item No. 1.00 here-in-before, but of capacity 7.5 HP, the motor/submersible to be taken to Silchar workshop from Kumbha Pump House, complete all as specified and as directed. |
| 4 | Dismantling and taking down squirrel cage induction motor assembly 10-15 HP, 3HP, 415V for heating, varnishing of motor winding, remetaling of shaft and replacement of bearing etc. including disconnection of cable, earthing strip etc carrying of pumping set to Silchar work shop from Sonatola Pump House including loading/unloading and bringing back to same location after repair and testing at site with proper coupling and alignment, complete all as specified and directed. |
| 5 | All as per item No. 4.00 here-in-before, but of capacity 30 HP, the motor to be taken to Silchar workshop from Sonatola Pump House, complete all as specified and as directed. |
| 6 | All as per item No. 4.00 here-in-before, but of capacity 0.5/1/2/3/5 the motor/submersible to be taken to Silchar workshop from Sonatola Pump House/Offr Mess/Stn HQ, complete all as specified and as directed. |
| 7 | Repair and maint squirrel cage induction motor assembly 10 HP, 3 ph, 415V alongwith wornout winding & rewinding the same with super enameled copper wire of existing gauge with all associated materials such as dry insulation varnish, cotton tape, soldering materials, glass tube, insulation paper, separator, film paper, removing of burn winding, cleaning of slot, removing of bearing, greasing, servicing, refixing of bearing etc including all dismantling work such as removal from foundation, coupling, disconnection of cable, earthing strip etc, carrying of motor to Silchar work shop from Sonatola/Kumbha pump house including loading/unloading and bringing back to Sonatola pump house and Kumba Pump house, reassembling and reinstallation of motor in foundation, proper coupling and alignment with pump set, including satisfactory testing, complete all as specified and as directed. |
| 8 | All as per item No 7 here-in-before, but of capacity 12.5 HP |
| 9 | All as per item No 7 here-in-before, but of capacity 15 HP |
| 10 | All as per item No 7 here-in-before, but of capacity 40 HP |
| 11 | All as per item No 7 here-in-before, but of capacity 50HP |
| 12 | All as per item No 7 here-in-before, but of capacity 3/5/7.5 HP |
| 13 | All as per item No 7 above but submersible (fountain pump) / Monoblock boosting pump of capacity 0.5 HP/1 HP/ 2 HP including repairs to starters complete all as specified and as directed . |
| 14 | Dismantling, taking down and Repairing, servicing of pump set including dismantling of existing centrifugal Pump set of capacity (10-15 HP), multi-stage including water connections of GI, Suction and delivery pipe, and transporting from Kumbha Pump House to Silchar work shop including loading/unloading for necessary repairs such as remetaling, turning of Pump shaft, bearing case of suction & delivery and repairing/replacement of impeller, stage bush, alongwith repair/replacement of unserviceable spare parts, with new spare parts, cast iron welding of Pump casing and making alignment, connecting to motor, testing complete, carrying back from Silchar workshop, reinstallation of the Pump set complete with existing motor alongwith proper coupling and alignment, including satisfactory testing complete all as specified and directed. |
| 15 | All as per item No 14.00 here in before, but of pump set of capacity (40-50 HP). Note: Necessary spares required will be measured and paid separately under respective items of this BOQ. |
| 16 | Dismantling, taking down and Repairing, servicing of pump set including dismantling of existing centrifugal Pump set of capacity (10-15 HP), multi-stage including water connections of GI, Suction and delivery pipe, and transporting from Sonatola Pump House/AF Stn to Silchar work shop including loading/unloading for necessary repairs such as remetaling, turning of Pump shaft, bearing case of suction & delivery and repairing/replacement of, impeller, stage bush, alongwith repair/replacement of unserviceable spare parts, with new spare parts, cast iron welding of Pump casing and making alignment, connecting to motor, testing complete, carrying back from Silchar workshop, reinstallation of the Pump set complete with existing motor alongwith proper coupling and alignment, including satisfactory testing complete all as specified and directed. |
| 17 | All as per item No 16.00 here in before, but of pump set of capacity (30 HP). Note: Necessary spares required will be measured and paid separately under respective items of this BOQ. |
| 18 | Supply only bearing Size -6312ZZ suitable for 40-50 HP motor complete all as specified and as directed . Make - TATA/NBC/SKF or equivelent as approved |
| 19 | Supply only bearing Size -6308ZZ/6306ZZ/6404 suitable for 10-30 HP motor complete all as specified and as directed . Make - TATA/NBC/SKF or equivelent as approved |
| 20 | Supply only Impeller cast iron suitable for 40/50 HP capacity multi-stage centrifugal pump, model RKB50/15E6ST, complete all as specified and directed. |
| 21 | Supply only stage casing cast iron suitable for 40/50 HP capacity multi-stage centrifugal pump, model RKB50/15E6ST, complete all as specified and directed. |
| 22 | Supply only Gasket set suitable for 50 HP capacity multi-stage centrifugal pump, model RKB50/15E6ST, complete all as specified and directed. |
| 23 | Supply only stuffing box gland set suitable for (10-15) HP capacity multi-stage centrifugal pump, model KDS/050, KDT/1050, KDT/1580, KDT1370/1372, complete all as specified and directed. |
| 24 | Supply only stuffing box gland set suitable for 40/50 HP capacity multi-stage centrifugal pump, model RKB50/15E6ST, complete all as specified and directed. |
| 25 | Supply only GM bush suitable for 10-15 HP capacity multi-stage centrifugal pump complete all as specified and directed. |
| 26 | Supply only GM bush suitable for 40-50 HP capacity multi-stage centrifugal pump complete all as specified and directed. |
| 27 | Supply and fixing shaft suitable for 30-50 HP complete all as specified and as directed. Make - TATA/NBC/SKF or equivelent as approved |
| 28 | Testing of treated/Raw water physical, chemical and bacteriological analysis from approved laboratory or institute, complete all as specified and directed. |
| 29 | Supply only gland packing 6mm complete all as specified and as directed. |
| 30 | Supply only servo MP 3 multipurpose grease suitable for pump set complete all specified and as directed. |
| 31 | Supply only orthotolidine solution (OT) on 100 ml bottle for chlorine test kit complete all as per specified and directed. |
| 32 | Supply and fixing PVC insulated single core stranded copper conductor conforming to IS 694 (1990),1100 volt grade 25 Sqmm complete all as specified and as directed . Make - FINOLEX/HAVELLS/ KE I / POLYCAB |
| 33 | Supply and fixing PVC insulated single core stranded copper conductor conforming to IS 694 (1990) ,1100 volt grade 35 Sqmm complete all as specified and as directed . Make - FINOLEX/HAVELLS/KEI/POLYCAB |
| 34 | Supply and fixing in repair MCCB 100-125 Amps 3 pole 415 volts 50 Hz 25 KA breaking capacity with adjustable thermal magnetic and spreader link on both sides, complete all as specified and as directed. Make - Havells /Legrand/L&T |
| 35 | Supply and fixing in repair contactor type ML - 4 complete all as specified and as directed. Make - L& T or equivalent approved |
| 36 | Supply and fixing in repair contactor type ML-3 complete all as specified and as directed. Make - L& T or equivalent approved |
| 37 | Supply and fixing in repair contactor type MNX-18,1 NO complete all as specified and as directed. Make - L& T or equivalent approved |
| 38 | Supply and fixing in repair contactor type MNX-9,1 NO complete all as specified and as directed. Make - L& T or equivalent approved |
| 39 | Supply and fixing in repair thermal overload relay range 3 to 10 amp, built in single phasing protection manual and auto reset mode complete all as specified and as directed. Make - L& T or equivalent approved |
| 40 | Supply and fixing in repair thermal overload relay for ASD starter range 9 to 15 amp, built in single phasing protection manual and auto reset mode complete all as specified and as directed. Make - L& T or equivalent approved |
| 41 | Material and labour for preparation of old painted surfaces of motor and pump set cap 30 HP to 50 HP incl pipe of any size inside the room by cleaning old rusted paint by scrapper and applying two coats of synthetic enamel paint of existing colour with all necessery arrangement at Kumbha Pump House and Sonatola Pump House complete all as specified and as directed. |
| 42 | All as per item No 41 here in before but capacity 10 HP to 15 HP |
| 43 | All as per item No 41 here in before but capacity 02 HP to 7.5 HP |
| 44 | Labour for taking out filter media complete from pressure filter of capacity 10000 GPH (over all size of the pressure filter 2000mm dia x 2795mm overall hight) and depositing the same and removal of unserviceable materials to a distance not exc 50m including complete servicing/ overhaulling of pressure filter / back wash complete & repair of butterfly valves complete all as specified and directed. |
| 45 | Material and labour for scrapping, cleaning and removing of all scales and dirts etc from the internal surfaces of pressure filters and applying one coat of black bituminous paint (suitable for drinking purpose) complete all as specified and directed. |
| 46 | Supply and lay filter media using followings materials in layers as specified against each items starting from the bottom to top for 30 cm deep, 1st layer with filter gravels of size 25mmX12mm - 0.37 Cum, 2nd layers with filter gravel of size 12mmX06mm - 0.37 Cum, 3rd layers with filter gravel of size 06mmX03mm - 0.37 Cum, 4th layers with filter gravel of size 03mmX1.5mm - 0.37 Cum, Filter Sand 10 x 24 mesh - 2.50 Cum, Filter Sand 16 x 32 mesh - 0.50 Cum complete all as specified and directed. |
| 47 | Supply and fix butterfly valve of size 100 mm including taking down complete all a specified and directed. |
| 48 | Supply and fix PVDF filter nozzle mushroom type for water treatment plant corrosion resistant and compatible with pressure vessels whether threaded / flange type up to 10 Kg/cm2 complete all as specified and directed. |
| 49 | Supply and fix in replacement of water pressure gauge up to 100 kg/cm2 including taking down old complete all as specified and directed. |
| 50 | Material and labour for preparation of (external surfaces of pressure filter) by removing of all foreign material from existing surfaces and cleaning throughly the surface and complete drying the surface and applying two coats of synthetic enamel paint (First quality) complete all as specified and directed. |
| 51 | Material and labour for preparation of old GI Pipe upto 100 mm external surface incl all fittings and valves complete at site by removing of all foreign material from steel surfaces and cleaning throughly the surface and complete diycyling the surface and applying two coats of synthetic enamel paint (First quality) complete all as specified and directed |
| 52 | Dismantling and taking out from pipe, CI Sluice valve/ NRV/ ARV/ Foot Valves etc of any size, removing from site upto 100mm, complete all as specifed and directed |
| 53 | Supply and fix CI Sluice valve of type PN-1.6 and size 80 mm bore with gun metal raising spindle, both ends flanged conforming to IS-14846-2000 and drilled with necessary holes for bolts including jointing material viz nuts, bolts, rubber gaskets etc with iron wheel head including flanged joints complete all as specified and directed. |
| 54 | All as per item No 53 here-in-before but 100 mm bore |
| 55 | Supply and fix cast iron foot valve 100 mm dia Class PN-1.0 with flanged conforming to IS-1538 complete all as specified and directed |
| 56 | Supply, installation, testing & commissioning of reciprocating dosing pump, high pressure, single head, gear motored adjustable dosing pump having output of 2 U.S. GPD to 40 U.S. GPD and adjustable high pressure of up to 100 PSI, 230V, 50 Hz, 44 RPM, 1/30 HP Fractional with accessories including lead, tubing, connection nuts, injection check valve, clay weight and ferrules on exing pipe for dosing complete all as per specified and directed. Make :- Declibac Model 96 NGQ51 or equivalent model |
| 57 | Material and labour to replace of worn out fully automatic star delta starter (ASD) - HGS Series capacity of 40 HP/30KW, Overload relay range 28A-40A, all in Sheet steel enclosure 415V, 50Hz, 3-Ph confirming to IS/IEC 60947-4-1, including electrical connections, lugs etc with PCC required for grouting in surface/floor/ wall/panel completed all as specified and directed. Make: ABB Item code SDA-40or equivalent make L&T, Havells. |
| 58 | Material and labour to replace of worn out fully automatic star delta starter (ASD) - HGS Series capacity of 15 HP/11KW, Overload relay range 12A-18A, all in Sheet steel enclosure 415V, 50Hz, 3-Ph confirming to IS/IEC 60947-4-1, including electrical connections, lugs etc with PCC required for grouting in surface/floor/ wall/panel completed all as specified and directed. Make: ABB Item code SDA-15or equivalent make L&T, ABB. |
| 59 | Material and labour to replace worn out DOL starter - HGS Series of capacity of 5 HP/3.7KW, Overload relay range 6.0A-9A, all in Sheet steel enclosure confirming to IS/IEC 60947-4-1,IP-54, including all electrical connections and required materials lugs etc with PCC required for grouting/hanging in surface/floor/wall/panel completed all as specified and directed. Make: ABB Item code MA_5.00/1SYN140318R or equivalent make L&T, Havells. |
| 60 | Material and labour to replace worn out DOL starter - HGS Series of capacity of 3 HP/2.2 KW, Overload relay range 4.0A-6.0A, all in Sheet steel enclosure confirming to IS/IEC 60947-4-1,IP-54, including all electrical connections and required materials lugs etc with PCC required for grouting/hanging in surface/floor/wall/panel completed all as specified and directed. Make: ABB Item code MA-3.00/1SYN140318R or equivalent make L&T, Havells |
| 61 | Material and labour to replace worn out DOL starter - HGS Series of capacity of 2 HP/1.5 KW, Overload relay range 2.8A-4.2A, all in Sheet steel enclosure confirming to IS/IEC 60947-4-1, IP-54, including all electrical connections and required materials lugs etc with PCC required for grouting/hanging in surface/floor/wall/panel completed all as specified and directed. Make: ABB Item code MA-2.00/1SYN140318R or equivalent make L&T, Havells |
| 62 | M& L for making flow chart diagram of water supply size (1.5*1.5 mtr) using different colours on flex sheet as directed at site including fixing on installation complete all as specified and directed. |
| 63 | Supply and fix in repair single phase preventer relay for the voltage between 280 to 520 V AC (L-L) confirming to cat part no SPPA2M2 (Selec) complete all as specified and directed. |
| 64 | Supply only dosing pump tube (Part No - MCCP207-B) complete all as specified and directed. |
| 65 | Supply and fixing of agitator (Stirrer) with motor suitable capacity of 100 litres chlorine dozing PVC tank complete all as specified and directed. |
| 66 | Material and labour for earthing using GI earthing strip 32x6mm complete with galvanised steel earth plate electode 600mmx600mmx6mm thick buried directly in ground, earth pit not less than 2.25 meters deep below ground level connection to and including GI strip of size 32x6mm to the extend 7.5 mtr as earth lead by means of GI bolts, Nuts etc. with provision of charcoal and salt all as per electrical plate No 3 of SSR Part I including water arrangement with GI Pipe 20 MM dia (medium Grade), earth lead protection pipe 50mm medium grade with bends, elbow etc. from earth plate to test point, excavation and earth work returning, filling, ramming and removing of soil to distance not exc 50mtr, make good to match with existing surface making PCC pit (Earth chamber) having internal size 30cm x 30cm x 30cm and outer size 60cm x 60cm x 60cm with RCC reinforced cover 50mm thick and testing on completion including making test point on wall as per SSR specification all as specified and directed. |
| 67 | Cleaning with disinfect material for treatment of supply water at pump house all as directed by engineer in charge. |
| 68 | Cleaning and treatment of water supply at pump house for daily usage water in station with coagulation as directed by engineer in charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayJul 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender