|
| 1 | Surface dressing n. exc 15 cm deep, getting out in soft/loose soil complete all as specified and as directed. |
| 2 | Excavation in trenches, n. exc.1.5m wide and n.exc. 1.5m deep n.exc.10 Sqm on plan and getting out hard/dense soil complete all as specified and as directed. |
| 3 | Excavation over areas n.exc. 1.5m deep for foundation n.exc.10 Sqm on plan and getting out hard/dense soil complete all as specified and as directed. |
| 4 | Excavation in post holes (Hard/dense soil) each n.exc.0.5 cum, getting out, RFR in and ramming earth or broken rubble mixed wth earth around in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n.exc. 50m. |
| 5 | M & L for RCC work Type B1 1:2:4 (using 20 mm graded aggregate) for Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed. |
| 6 | M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams with fair finished surface complete al as specified and as directed. |
| 7 | M & L for Cement concrete type D2(1:4:8) using 40mm graded stone aggregates as in foundation lean concrete complete all as specified and as directed. |
| 8 | M&L mild steel TMT bars 10 mm dia and over cut to length, bend to shape required, incl cranking bending spirally for hooking for column, hooking ends and binding with 0.9 mm dia annealed wire confirming to ISI complete all as specified and as directed. |
| 9 | M&L mild steel 6 to 8mm mm dia TMT bars as in stirrups, spacers and binders, bend to shape required, incl cranking bending spirally for hooking for column, hooking ends and binding with 0.9 mm dia annealed wire confirming to IS complete all as specified and as directed. |
| 10 | M&L for 75mm PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth protection/ path/hardstanding even and smooth without using extra cement complete all as specified and as directed. |
| 11 | M & L for brick work fly ash brick with old size bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed. |
| 12 | M&L Rendering for 10 mm thick with CM 1:6 on fair faces of brick work to be finished even and smooth (without using extra cement) complete all as specified and as directed. |
| 13 | M & L 15 mm thick rendering on fair faces of brick masonary or concrete surfaces in CM 1:4 finished even and smooth without using extra cement for external surface of wall mixed with WPC complete all as specified and as directed. |
| 14 | M&L for preparation of new or old plastered/unplastered surfaces of wall and applying two coats of cement base paint over a coat of white cement primer complete all as specified and as directed. |
| 15 | M&L for preparation of new or old plastered/unplastered surfaces of walls and applying three coats of white wash complete all as specified and directed. |
| 16 | Returning filling including spreading, levelling, watering and well ramming in layers n.exc 25 cm complete all as specified and as directed. |
| 17 | Removing of excavated material to a distance exc 250 mtr and n exc 500m and depositing where directed complete all as specified and as directed. |
| 18 | M & L moorum/red bajri filling in floors or pavings, laid in layers n. exc. 15cm thick, spread, levelled and rammed including watering complete all as specified and as directed. |
| 19 | M & L for hardcore of gauge n.exc 63mm deposited, spread in layers n.exc 15 cm thick,watered and rammed to a true surface complete all as specified and as directed. |
| 20 | M & L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tileexceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick cement screed bed in cm 1:6 set and jointed in neat cement slurry and pointed in coloured cement to match the surface complete all as specified and as directed. |
| 21 | M & L glazed coloured ceramic tiles 450x300x7mm thick as in verticle surfaces etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 cm thick plaster in CM 1:4 complete all as specified and as directed. |
| 22 | S & F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, in opening as per specification and drawing complete all as specified and as directed. |
| 23 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channelhaving a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed. |
| 24 | S&F 150 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed . |
| 25 | S&F 150 mm long extruded aluminium alloy handle fabricated type anodised complete all as specified and directed . |
| 26 | S&F 100mm long cold rolled, mild steel butt hinges medium weight complete all as specified and directed. |
| 27 | S&F 300 mm aluminium alloy anodized sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section etc complete all as specified and directed. |
| 28 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa and AZ-150 as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 29 | S&F Pre-painted galvalume aluminium zinc coating GI based crumpled steel plain sheet 0.50mm of any colour having tensile strength of 550Mpa and AZ-150 as in ridge fixed with self tapping screws complete all as specified and as directed. |
| 30 | S&F for Structural steel work conforming to Fe-290 Gde E-165 Roof trusses (framed), trussed,rafters, purlins, crane gantries, rails and fastenings, cleats and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.complete all as specified and as directed. |
| 31 | M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregates) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directe incuding necessary formwork required complete all as specified and as directed. |
| 32 | M&L,Anodised aluminum frame for doors,window,ventilators with one or more rebates including joining cleat for fixinfg etc,complete all as specified and directed |
| 33 | S&F Figured glass 4mm thick, pin head type and glazing with oil putty in squares nexc 0.5 sq. m in each pane complete all as specified and directed Please Enable Macros to View BoQ information |
| 34 | S&F Figured glass 4mm thick, pin head type and glazing with oil putty in squares nexc 0.5 sq. m in each pane complete all as specified and directed Please Enable Macros to View BoQ information |