Tender For Comprehensive Repair And Maintenance Of Bldg At Certain Locations Under Age B/R-I Under Ge (West) Mathura
Tender Value
45 Lakhs
Estimated cost
Bid Submission
14 Jul 2026
7 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mathura → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Repair And Maintenance Of Bldg At Certain Locations Under Age B/R-I Under Ge (West) Mathura
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhats or frame with shutters(without taking off shutters from the frame not exceeding 1.50 sqm each & removing to store etc all as specifid & directed. |
| 2 | Taking down chowkhats with shutters (without taking off shutters from the frame exceeding 1.50 sqm each but not exceeding 4 sqm) etc complete all as specified & directed. |
| 3 | Taking down shutters (including fittings & fixtures) of any description exceeding 1.0 sqm and not exceeding 2.00 sqm each and refixing in the same opening after resecuring or easing & adjusting of shutters complete all as specified and as directed. |
| 4 | S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fixed in opening as per specification complete all as specified and directed |
| 5 | S&F 30mm thick factory made solid PVC moulded door shutter with particle board core with 5mm thick PVC moulded sheet on the front face and 5 mm thick PVC plain colour sheet on back face complete all as specified and directed |
| 6 | S&F Aluminium handle cast type anodized 150 mm long complete all as specified and directed |
| 7 | S&F tower bolt Aluminium anodised of 150 mm long complete all as specified and directed. |
| 8 | S&F 100 mm long stainless steel butt hinges anodised and fixed complete all as specified and directed. |
| 9 | S&F Pressed steel frame for doors of size 105x60mm with one or more rebates including necessary fixing lugs,100mm stainless steel hinges, lock strike plate etc including one shop coat of priming complete all as specified and directed. |
| 10 | S&F Pressed steel frame for doors of size 125x60mm with one or more rebates including necessary fixing lugs,100mm stainless steel hinges, lock strike plate etc including one shop coat of priming complete all as specified and directed. |
| 11 | M&L for cement concrete 1:3:6 type C–1 filling of pressed steel frame and hold fast blocks etc complete all as specified and directed. |
| 12 | S&F 35mm thick 2nd class hard wood glazed Skelton shutters open rebated and prepare to receive glass gauges etc without sash bars edges of gramng plain chamfered or rounded fluted without and mixed beads for securing gases etc size of chambers as specified in SSR Part I sector 8-20 (a) fitted to chowkhat complete all as specified and directed. |
| 13 | S & F Factory made Plain framed, panelled shutter 2nd class hardwood rail and style 35 mm thickness (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 14 | S&F Aluminium sliding bolt of any description and type of size 300mm long complete all as specified and directed. |
| 15 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width or aperture 1.40 mm complete all as specified and directed. |
| 16 | S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width or aperture 1.40 mm complete all as specified and directed. |
| 17 | M&L preparing surface of wood and wood based surface new on any description not otherwise described over 10cm with or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 18 | M&L providing two coats of synthetic enamel paint over new surface and a coat of red oxide primer on steel surfaces including preparation of surface of any description not exceeding 10 cm width or girth complete all as specified. |
| 19 | M&L for preparation of old steel surfaces of any description or girth over 10 cm width or girth and applying one coat of synthetic enamel paint including cleaning, stopping and rubbing down, removing all drops and dirt all as specified and directed. |
| 20 | M&L for preparation of old wooden surfaces of any description or girth over 10 cm width or girth and applying one coat of synthetic enamel paint including cleaning, stopping and rubbing down, removing all drops and dirt complete all as specified and directed. |
| 21 | S&F in repair factory made uPVC white colour casement (Openable) Door made of extruded profile with wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling old holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild steel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass complete all as specified and directed. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 22 | M&L for Providing and fixing factory made UPVC white colour sliding window three track made of extruded profile with wall thickness of 2.3mm(+/- 0.2mm). Window profile with hollow section with multi chamber, frame (88mm x 52mm), sliding sash (42mm x 67mm), sliding mesh sash (42mm x 57mm) sliding interlock (one vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc, making arrangement for fixing hardware. EPDM gasket, 1.2 +/- 0.2mm thick galvanised steel frame (30mm x 18mm) 2Nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100 long fasteners. Hardware: ( Touch lock of zinc alloyed (white powder coated), steel roller system, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and required accessories complete all as specified and directed.(Note: The unit rate quoted by contractor includes cost of 5.00 mm thick sheet glass, ordinary quality and all other connected accessories. Net opening will be measured for payment purpose.)(A) Area n. exc 2.00 Sqm each |
| 23 | Repair to UPVC door and windows in all respect including butt hinges, handles, stiles, locks, glass, gasket, neoprene, door closer, floor door stopper including replacement of stores if required etc complete. |
| 24 | S&F powder coated aluminium frame for doors, windows/Ventilators and partitions, with one or more rebate including joining cleat for fixing etc including all fitting complete all as specified and directed. |
| 25 | S&F powder coated Anodised aluminium door section, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading screws Anodise aluminium fitting such as including hinges 100 mm long (2 no) and suitable handle(2 No) complete all as specified and directed. |
| 26 | S & F powder coated Anodised aluminium window and ventilator shutters side hung type without sash, aluminium sections weighing 0.55 kg/ m including necessary joining cleats, glazing clips rubber packing, anodised aluminium snap beading screws Anodise aluminium fitting such as peg stays 150 mm long (1 No), including peg stay and hinges type B-21, 100 mm long (2 no) and suitable handle(1 No) complete all as specified and directed. |
| 27 | S&F powder coated aluminium grill in windows, doors or ventilators of approved make complete all as specified and directed. |
| 28 | S&F for 12mm thick toughened Glass door with Hole, L connector, track connector, including sliding complete with all accessories complete all as specified and directed. |
| 29 | S&F in repairs powder coated aluminium partition using 95.6mmx 44.8mm x 1.00-1.2mm frame work with 12mm thick exterior grade veneered particle board with decorative veneers on both face/5.5mm thick frosted glass including aluminium beading for fixing board each panel not exc 1.2 Sqm complete all as specified and directed. |
| 30 | M&L for Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. |
| 31 | S&F 5.50 mm thick Sheet glass, ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specified and directed. |
| 32 | S&F Sheet glass 4 mm thick in glazing to aluminium door, window & partition including pad, gasket complete all as specified and directed. |
| 33 | S&F 6 mm thick coloured ACP(Aluminium Composite panel) sheet using aluminium partition including joining cleats for fixing etc. complete all as specified and directed. Note : colour of sheet approved by GE. |
| 34 | S& F aluminium mortice lock 4 levers and 100 mm size for aluminium doors complete all as specified and directed. |
| 35 | S&F in repair 150mm floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 36 | S&F in repair door closer hydraulically regulated designation No. 3 universal type cast iron body suitable for door shutters of 851 to 1000mm in width and fixed complete all as specified and directed. |
| 37 | S&F 300mm mild steel (Helical door spring) ordinary rat tail rod pattern spring including roller and roller plate complete with necessary welding work complete all as specified and directed. |
| 38 | S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. |
| 39 | S&F in repair CP curtain rods (medium weight) 20mm dia with fixing with decorative CP brackets, holders & knobs etc fixed complete all as specified and directed. |
| 40 | S&F in repair door seal for doors upto 1000mm long and thickness not less than 1mm complete all as specified and directed. |
| 41 | Demolition of brick work built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed. |
| 42 | M&L for Brick work using Old size burnt clay bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) etc complete all as specified and directed. |
| 43 | All as per serial item No 42.00 here-in-before but except brick only complete all as specified and directed. |
| 44 | Taking down cement plaster on brick/stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 45 | M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces, finished surface even & fair without using extra cement internal surface etc complete all as specified and as directed. |
| 46 | M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces, finished surface even & fair without using extra cement external surface height upto G+2 Story Bldg complete all as specified and as directed. |
| 47 | M&L for rendering 5mm thick in CM 1:3 on fair faces of brick work or concrete surfaces, finished surface even & fair without using extra cement on ceiling surfaces complete all as specified and as directed. |
| 48 | M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including taking down, scrubbing and washing existing surfaces, the top layer with brushes and water to expose the stone chippings .complete all as specified. |
| 49 | Supplying and applying, Smart Care Damp Block 2K, two component elastomeric acrylic polymer modified cementations waterproofing coating, having 80 % elongation as per ASTM D412, resisting 5 bars hydrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per DIN 1048, crack bridging upto 1.2mm as per ASTM 4548.5. The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing, etc., complete as per manufacturers specifications. Sprinkle sand at 10-15 gram per sqft for better grip with plaster complete all as specified and directed. |
| 50 | M&L for preparation of new plastered surfaces of walls and applying two coats oil bound distemper over a coat of chalk whitening preparatory to distemper complete all as specified and directed. |
| 51 | M&L for preparation of new plastered surfaces of walls and applying two coats of cement based paint on walls etc complete all as specified and as directed. |
| 52 | M&L for preparation of new plastered surfaces on ceiling and applying three coats of white wash on ceiling complete all as specified and directed. |
| 53 | M&L for preparation of old distempered surfaces of wall by rubbing down, stopping nail holes with one coat of putty on wall and applying one coat of oil bound distemper with roller or other similar equivalent etc all as specified and directed. |
| 54 | M&L for preparation of old treated surfaces of walls including cornices pillars etc and applying one coat of white wash on walls all as specified and directed. |
| 55 | All as per serial item No 54.00 (here-in-before) but on ceiling complete all as specified and directed. |
| 56 | M&L for preparation of old surfaces of wall by rubbing down, stopping nail holes, fillings cracks with putty and applying one coat of cement based paint on walls for height upto G+2 Story Bldg all as specified and directed by Engr-in-Charge. |
| 57 | M&L for complete removal of existing treatment and preparation of old surfaces of walls and applying two coats of APEX of Dark Shade on walls for height upto G+2 Story Bldg all as specified and directed. |
| 58 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.. |
| 59 | M&L for Non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed in cement mortar 1:6 for laying floor finishes complete all as specified & directed. |
| 60 | M&L for glazed ceramic coloured tiles in vertical surface 300X450x7-8mm thick set and jointed in neat cement slurry and pointed in coloured cement to match including 10mm thick rendering in cement mortar 1:4 for skirting /dado finishes complete all as specified & directed. |
| 61 | M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick of size exc. 0.18 sqm but n. exc, 0.38 sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:6 for laying floor finishes complete all as specified & directed. |
| 62 | All as per serial item No. 61.00 above but as in skirting over 10 mm cement mortar backing (1:3) complete all as specified and directed. |
| 63 | M&L for Light shade vitrified ceramic tiles 10mm thick (Square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm in floors etc. set and jointed in neat cement slurry and pointed in paste pigmented to tile shade over and including 15mm thick cement and sand screed (1:6) complete all as specified and directed. |
| 64 | All as per serial item No. 63.00 above but as in skirting over 10 mm cement mortar backing (1:3) complete all as specified and directed. |
| 65 | M&L for Light shade vitrified ceramic tiles 10mm thick (Square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in paste pigmented to tile shade over and including 15mm thick cement and sand screed (1:6) complete all as specified and directed. |
| 66 | All as per serial item No. 65.00 above but as in skirting over 10 mm cement mortar backing (1:3) complete all as specified and directed. |
| 67 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc Laid, bedded and pointed in any mortar complete all as specified and directed. |
| 68 | M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) for Shelves (veneering to wall) incl 12mm thick plaster in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified & directed. |
| 69 | Demolition of cement concrete ( unreinforced ) in ground floors and pavings not exceeding 15 cm thick above or below ground level complete all as specified and directed. |
| 70 | M&L for plain cement concrete type B1 (1:2:4), using 20 mm graded crushed stone aggregate, 40 mm thick, as in floor and finished even and smooth using extra cement laid in alternate bay and joints filled with bituminous compound grade 'A' complete all as specified and directed. |
| 71 | M&L for 75mm thick cement concrete type C-1, (1:3:6) using 20mm graded stone aggregate as plinth protection and finished surface even and smooth without using extra cement complete all as specified and directed. |
| 72 | M&L for PCC 75mm thick, 1:4:8 (Type D2) using 40mm graded crushed stone aggregate as in sub base complete all as specified and directed.. |
| 73 | M&L for factory made 60mm thick machine pressed precast cement concrete coloured designer polished (reflecting type) interlocking paver blocks of Grade M-35 conforming to IS 15658-2006 of shape and size as directed with grey cement and no pigment with coloured top casted in an automatic plant working on vibration and simultaneous hydraulic compression from top, laid over & including 25mm thick sand cushioning, joints of blocks filled with dry sand and compacted with mechanical vibrator complete all as specified & as directed. Note : Shape & colour of paver blocks shall be as approved by the GE. |
| 74 | M&L Pre polished Chequered tiles (any colour) 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors including 20mm screed bedding in cement mortar (1:4) complete all as specified and directed. |
| 75 | M&L for vitrified paving tiles (any colour) of size 30cm x 30cm x 10mm thick, with gray cement & pigment set, jointed and pointed in neat cement slurry in floors laid over and including 15mm screed bedding in cement and sand mortar (1:6) complete all as specified and directed. |
| 76 | M&L for providing cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) in side filling and rounded chamfered edges complete all specified. |
| 77 | S&F 15mm bore GI tubes medium grade, with all fittings and fixed complete to wall and ceiling and floors including Taking down steel tubing and connections 15 mm bore tube complete all as specified and directed. |
| 78 | S&F 20mm bore GI tubes medium grade, with all fittings and fixed complete to wall and ceiling and floors including Taking down steel tubing and connections 20 mm bore tube complete all as specified and directed. |
| 79 | Labour only for disconnecting existing water tank, setting asides for repair after removing all scale and dirt etc from tanks and mouth and reconnecting and re-fixing in position of capacity exceeding 500 litres and n.exc. 1000 litres in all necessary GI fittings for re-fixings as socket/tank nipple etc (including writing with white paint date of cleaning) complete all as specified and directed. |
| 80 | S&F rotational moulded polyethylene water storage tank 750 Litre capacity in white colour (cylindrical vertical with closed top) hoisted and fixed in position with all necessary GI fittings complete all as specified in SSR Part-I including dismantling water tank complete all as specified and directed. |
| 81 | S&F rotational moulded polyethylene water storage tank 1000 Litre capacity in white colour (cylindrical vertical with closed top) hoisted and fixed in position with all necessary GI fittings complete all as specified in SSR Part-I including dismantling water tank complete all as specified and directed. |
| 82 | S&F in repair 20mm dia PTMT ball PVC valve, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 83 | S&F in repair brass 20mm Gate valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 84 | S&F in repair PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or fixed to wall of 110 mm bore complete all as specified and directed by Eng-in-charge. |
| 85 | S&F in repair PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or fixed to wall of 75 mm bore complete all as specified and directed by Eng-in-charge. |
| 86 | M&L in repair 100mm CI pipes soil, waste and vent pipe in any length with or without ears, with cement joints fixed to wall including applying a coat of black japaned paint on outer surface of pipes complete all as specified and directed. |
| 87 | M&L in repair 75mm CI pipes soil, waste and vent pipe in any length with or without ears, with cement joints fixed to wall including applying a coat of black japanned paint on outer surface of pipes complete all as specified and directed. |
| 88 | S&F PVC (SWR) bends any radius of 110 mm bore complete all as specified and directed by Eng-in-charge. |
| 89 | S&F PVC (SWR) bends any radius of 75 mm bore complete all as specified and directed by Eng-in-charge. |
| 90 | S&F for 100mm CI pipes soil, Bends (any radius), diminishing pieces or tapers (large bore measured) complete all as specified and directed. |
| 91 | S&F for 75mm CI pipes soil, Bends (any radius), diminishing pieces or tapers (large bore measured) complete all as specified and directed. |
| 92 | S&F in repairs 32/40mm bore CP waste coupling fittings for basins/sink with long shanks and fly nuts, flange and bedded in red cement and fixed complete all as specified and directed. |
| 93 | S&F in repair PVC waste for sink, wash basin and urinal pipe 32/40mm dia of length 0.8m to 0.9m fixed complete all as specified and directed by Eng-in-charge. |
| 94 | S&F in repair brass chromium plated Wall mixer with regular spout, popup waste system and 450mm long braided hoses with connection and nuts complete all as specified and directed. |
| 95 | S&F in repair brass chromium plated WHB mixer with regular spout, popup waste system and 450mm long braided hoses with connection and nuts complete all as specified and directed. |
| 96 | S&F in repair 15mm bore CP bib tap long body cast copper alloy fancy type screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 97 | S&F 15mm bore in repair CP pillar taps Fancy type cast copper alloy along screwed down high pressure with hot & cold with long screwed shanks and fly nuts screwed for GI pipe complete all as specified and directed. |
| 98 | S&F in repair CP angle fancy type 15 mm bore high pressure screwed for iron pipe complete all as specified and directed. |
| 99 | S&F in repair 2 way 15mm CP angle fancy type 15 mm bore high pressure screwed for iron pipe complete all as specified and directed. |
| 100 | S&F in repair 2 way 15mm CP fancy bib tap 15 mm bore high pressure screwed for iron pipe complete all as specified and directed. |
| 101 | S&F in repair of PVC connection pipe 15 mm size with nuts, washers of length 450 mm pipe complete all as specified and directed. |
| 102 | S&F in repair vitreous china was down, One piece water closet pan (pedestal pattern), white including fixing bolts and connection to flush pipe and drain out going pipe and closet seat cover black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 103 | S&F in repair vitreous china was down, water closet pan (pedestal pattern), white including fixing bolts and connection to flush pipe and drain out going pipe and closet seat cover black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 104 | S&F for PVC EWC seat cover of any type & make for pedestal pan complete all as specified and directed. |
| 105 | S&F in repair vitreous china was down, water closet pan (Orrisa pattern), long pan of size 580 x 440 mm white with 'P' or 'S' trap with integral foot rests, any pattern, including connection to trap and to flushing pipe, anti syphonage pipe including making good to floor ete complete all as specified and directed. |
| 106 | S&F in repair PVC valve less, symphonic action type, flushing cistern 10 litre capacity, low level, white/coloured, with inlet, wall valve, float and handle, flush pipe including bracket complete all as specified and directed. |
| 107 | S&F in repair vitreous china wash basin, white, flat back, size 550x400mm including waste pipe and brackets but excluding tapes, chain and plug etc complete all as specified and directed. |
| 108 | S&F in repair chromium plated shower rose with or without swivel joints including fixing to steel pipe of 100 mm size complete all as specified and directed. |
| 109 | S&F in repair CP Jet spray butter fly design fixed on EWC with stainless screw as approve complete all as specified and directed. |
| 110 | S&F in repair CP Health faucet with stand fixed on wall in CP hose pipe 1 metre length and stainless steel screw as approve complete all as specified and directed. |
| 111 | S&F in repair stainless steel kitchen sink with draining board, made out of 1 mm thick sheet for kitchen/laboratories with plug washer and waste including bedding in cement mortar and fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified. |
| 112 | S&F in repairs Stainless steel utensil rack of size 750mm x 600mm, made out of 1mm thick stainless steel sheet of 1st quality as per sample kept in GE’s office (weight Appx 10Kg) supplied and fixed complete all as specified and directed. |
| 113 | M&L for Bands, straps, supports or stays, for rainwater, ventilating pipes, including bolts, if required hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 114 | S&F in repairs towel rail chromium plated 20mm dia ‘D’ type, 600mm long complete all as specified and directed. |
| 115 | S&F in repairs Bevelled edge looking mirror of 5 to 6 mm thick selected quality glass, 600x450mm size, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 116 | S&F in repair PVC Syphon kit assembly in existing flush tank complete all as specified and directed. |
| 117 | S&F PVC cabinet mirror size 350X450mm of standard size complete all as specified and directed. |
| 118 | S&F in repair Glass shelf 450mm long x 100 mm wide including brackets fixed to wall with sleeves and screws complete all as specified and directed. |
| 119 | S&F in repair corner glass shelf of size 300X300 mm including brackets fixed to wall with PVC sleeves and stainless steel screw complete all as specified and directed. |
| 120 | S&F in repairs vitreous china urinal Half stall type, white including CP spreader screwed for iron pipe and fixed complete including providing and fixing plugs with and including 60mm long brass screws, pointed around urinal back in cement; fixing discharge pipe, flush pipe, grating and union for discharge complete all as specified and directed. |
| 121 | S&F in repair stainless steel grating 100mm bore size fixed with white cement complete all as specified and directed by Eng-in-charge. |
| 122 | Dismantling of ceiling boards/panelling/ boards of any type and any thickness including cover fillets and timber frame work complete. |
| 123 | S&F 605X605 mm size of grid GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended form soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section ( not exc 1.2 m length ) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including Hangers 6 mm dia. GI (up to 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40X 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia. 40 mm long etc complete all as specified and as directed. Including providing and fixing designer board 4 mm thick non asbestos in ceiling fixed with screw as per manufacturer's instructions complete all as specified and directed. |
| 124 | S&F hollow corrugated shape PVC wall lining consisting of 5 mm thick decorative colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications complete all as specified and directed. |
| 125 | S&F GI lay in metal ceiling system of 600 x 600mm module which includes provides and fixing 'C' wall angle of size 20 x 30 x 20 mm of 0.5 mm thick prepainted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm C/C, suspending the main main C carrier os size 10 x 38 x 10 mm made of GI steel 0.7mm thick from the soffit with help of soffit cleat 37 x 27 x 25 x 1.6mm, rawl plugs of size 38 x 12 mm and C carrier suspension clip and main carrier bracket at 1000mm c/c. Inverted triangle shaped spring Tee having height of 24mm and width of 34 mm made of GI steel 0.45mm thick is then fixed to main C carrier and in direction to perpendicular to it at 600mm c/c with help of suspension brackets. Where ever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120gm/sqm (both side inclusive, fixing with clip in tiles into spring T with :-GI metal ceiling lay in plain beveled edge global white colour tiles of size 600 x 600mm and 0.5mm thick with 25mm height, made of GI sheet having galvanizing of 100gm/sqm (Both side inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. |
| 126 | S&F GI lay in metal ceiling system of 600 x 600mm module which includes provides and fixing 'C' wall angle of size 20 x 30 x 20 mm of 0.5 mm thick prepainted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm C/C, suspending the main main C carrier os size 10 x 38 x 10 mm made of GI steel 0.7mm thick from the soffit with help of soffit cleat 37 x 27 x 25 x 1.6mm, rawl plugs of size 38 x 12 mm and C carrier suspension clip and main carrier bracket at 1000mm c/c. Inverted triangle shaped spring Tee having height of 24mm and width of 34 mm made of GI steel 0.45mm thick is then fixed to main C carrier and in direction to perpendicular to it at 600mm c/c with help of suspension brackets. Where ever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120gm/sqm (both side inclusive, fixing with clip in tiles into spring T with :-GI metal ceiling lay in plain beveled edge global white colour tiles of size 600 x 600mm and 0.5mm thick with 25mm height, made of GI sheet having galvanizing of 100gm/sqm (Both side inclusive) and 20% perforation area with 1.8mm dia holes and having NRC of 0.5 electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation. |
| 127 | S&F in repair 18 mm thick Alstone Hybrid Water Proofing Board in cupboard shutter with decorative on one side & other side balancing white fixed by drilling screws complete all as specified and directed. |
| 128 | S&F Stainless steel handle cast type anodized 100 mm long complete all as specified and directed by Eng-in-charge. |
| 129 | S&F Continuous (piano) hinges, mild steel, bright finish or electro galvanised 30 mm Width of flaps (when open) in mm all as specified all as directed. |
| 130 | S&F Magnetic catcher fixed in with nut, screw washer complete all as specified and directed. |
| 131 | M&L for overhauling of rolling shutter including oiling, greasing , easing, spring replacement including all replacement of necessary fittings for smooth functioning of rolling shutter and with one coat of synthetic enamelled paint to steel surface complete all as specified and directed. |
| 132 | S&F 1.25mm thick steel rolling shutters without ball bearing as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, complete push pull or manual type including dismantling old shutter complete all as specified and directed. |
| 133 | S&F for Safety lever locks mild steel with 4 levers for rolling shutters all as specified. |
| 134 | S&F for Ball bearing for rolling shutters complete all as specified and directed. |
| 135 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of red colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified including Dismantling of AC (corrugated or semi corrugated etc) sheets in roof covering complete all as specified and directed. |
| 136 | Dismantling timber scantlings 40 sqcm and over in section in framed work, in any position complete all as specified and directed. |
| 137 | S&F framed work such as rolled section such as joist, beam, channel, angle, tee use in purlin ,rafter etc and similar work confirming to Fe-290 complete all as specified and directed by Eng-in-charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysJul 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender