Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Taking down shutters of any description n exc. 1.00 Sqm each, complete all as specified and directed. |
| 2 | Taking down shutters of any description exc. 1.00 Sqm and n exc. 2.00 Sqm each, complete all as specified and directed. |
| 3 | Taking down Chowkats or Frame (without taking off shutter from the frame) n exc. 1.50 Sqm, complete all as specified and directed. |
| 4 | Taking down Chowkats or Frame (without taking off shutter from the frame) exc. 1.50 Sqm but n exc 4.00 Sqm each, complete all as specified and directed. |
| 5 | M&L for Pressed steel frames of size 105 X 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. |
| 6 | M&L for Pressed steel frames of size 125 X 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed. |
| 7 | S&F in repair MS helical door spring 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete with welding, painting complete all as specified and directed. |
| 8 | S&F in repair 35mm thick 2nd class hard wood Plain framed shutter (One/two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stiles as per IS:1003 (part-I), kiln seasoned and chemically pressure treated complete all as specified. |
| 9 | S&F in repair 35mm thick 2nd class hard wood Glazed and Skelton Shutter open rebated and prepared to receive glass gauze etc (without shas bar) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of numbers of shutter as specified in SSR Pt I Section 8, clause 8.24 (a) complete all as specified and as directed. |
| 10 | S&F factory made mild steel ventilators box type with upper top hung shutters and bottom fixed type shutters including pintol hinges, steel peg stay and one shop coat of red oxide primer incl taking down old, complete all as specified and directed. Note :- (i) The ventilator shall be fabricated as per Drg No CEUZ/TD/1302/2009 Sheet 1/3 to 3/3.(ii) Glazing, wire gauge shall be measured and paid separately. |
| 11 | S & F in repair Box type Steel windows with double shutters (inside for wiremesh & out side for glass), incl guard bar.hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded including a coat of red oxide after preparation of surface before fixing.Steel window shall be conforming to relevant IS complete all as specified and directed. |
| 12 | S&F in repair Solid PVC Door Frame of size 50mm x 47mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified and directed. |
| 13 | S&F in repair Factory made Solid Panel PVC Door Shutter 30 mm thick consisting of frame made out of MS tubes for Top & bottom nails MS framed shall be covered with neat moulded plain coloured PVC 'C' channel having PVC sheet ship if 20 mm width stuck inside with solvant cement for style and plain colour PVC shutters for top rail lock rail and bottom rail on edges side & gap insert for top rail bottom rail panelling of plain colour PVC sheet truck and nail with suitable PVC sheet bedding and jointed to shutter with solvent gear supply and fixing in the frame at site complete all as specified and directed. |
| 14 | S&F in repair Anodised aluminium Powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 15 | S&F in repair powder coated aluminium window/ventilator shutters, sliding/openable/fixed (as per required at site) type without sash bar, alu section weighing 0.55 kg/m, including necessary locking arrangement, guide wheels, joining cleats, glazing clips rubber packing anodised aluminium snap beading screws etc complete all specifiedand directed. |
| 16 | S&F in repair aluminium power coated door shutters (sliding/openable/fixed (as per required at site) , aluminium section weighing 0.55 Kg/m including necesssary joining cleats, glazing clips, rubber neoprene packing handles 2 Nos in each door, pad lock, hinges, anodised aluminium snap beading screws etc complete all as specified and directed. |
| 17 | S&F in repair Toughed glass 12 mm thick as in hinged doors, windows, partitions, automatic doors, fixed window and similar work including cutting to size, edge polishing, drilling of holes, cut-outs for fittings, and fixing in position with necessary patch fittings/SS fittings, floor spring, hinges, handles, locking arrangement, neoprene gaskets, sealant, packing, and all accessories complete, fixed to floor, wall or frame as required, complete all as specified and directed. |
| 18 | Hacking Out Old Broken Glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed. |
| 19 | S & F in repair 5.5mm thick Sheet glass,ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and directed. |
| 20 | S&F in repair for Sheet Glass, 3.00mm thick glazing with Beads or Oil Putty, not exc. 0.5 Sqm in Each Pane, complete all as specified and as directed. |
| 21 | All as per ser item above no.20 but Figured glass, pinhead type in squares n exc 0.5 sqm each pane complete all as specified and as directed. |
| 22 | S&F for galvanised stainless steel wire cloth, 0.56 mm nominal dia wire and average width of aperture 1.18 mm and fixed with tinned tacks or stainless steel wire staple complete all as specified and directed. |
| 23 | S&F in repair galvanised stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or stainless steel wire staple complete all as specified and directed. |
| 24 | S&F in repair powder coated aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed. |
| 25 | S&F in repairs 25mm dia Harrison rails, stainless steel, chromium plated with fixing brackets, stops, rollers, end caps etc. complete all as specified and directed. |
| 26 | S&F in repair of manual horizontal Venetian blinds, including all necessary accessories, brackets, fasteners, mounting hardware, and operating mechanisms. Blinds shall be made of aluminum slats, 25mm width (or as specified), powder-coated finish in approved color. Slats shall be corrosion-resistant, UV-stable, and easy to clean.Installation shall be done on window recess/surface mounted, complete with cord lock, tilt mechanism, and all operational parts for smooth opening and closing. All works shall be carried out as per manufacturer’s instructions complete all as specified and directed. |
| 27 | S&F in repair 100mm long Butt Hinges extruded aluminium alloy with Galvanised mild steel hinge pin, anodised and fixed complete all as specified and as directed. |
| 28 | S&F in repair 150mm long Extruded powder coated aluminium alloy Handles, fabricated type, anodisedcomplete all as specified and as directed. |
| 29 | S&F in repair for 125mm long anodised powder coated aluminium barrel tower bolt of extruded section complete all as specified and directed. |
| 30 | S&F in repair 200mm long powder coated Aluminium anodised, barrel Tower Bolts of extruded section and fixed complete all as specified and as directed. |
| 31 | S&F in repair 300 mm long powder coated Aluminium alloy, anodised, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed. |
| 32 | S&F in repair MS helical door spring 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete with welding fixed in repair, painting complete all as specified and directed. |
| 33 | S&F in repair, cast iron body Door Closer Hydralically regulated designation No 3 universal type, suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80kg and fixed complete all as specified and directed. |
| 34 | S&F in repair for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. |
| 35 | Providing and fixing PVC door bottom seal / door guard gap filler made of flexible PVC/foam, double-sided or adhesive type, suitable for sealing gap between door and floor, including cutting, fitting and all accessories, complete all as specified and directed. |
| 36 | Dismantling of boarding any description fixed in any position with nails complete all as specified and directed. |
| 37 | Providing and fixing cupboard shutters made of 19 mm thick block board, finished with 1.0 mm thick decorative laminate (sunmica) on outer face and 0.8 mm laminate on inner face, including 2 mm thick PVC edge banding / hardwood lipping on all exposed edges, complete with necessary hardware fittings such as stainless steel hinges, handles, magnetic catch / tower bolt, screws, etc., fixed in position, complete in all respects as per approved design and complete all as specified and directed. |
| 38 | Providing and fixing cupboard shutters/racks/partitions made of 12 mm thick block board, finished with 1.0 mm thick decorative laminate (sunmica) on outer face and 0.8 mm laminate on inner face, including 2 mm thick PVC edge banding / hardwood lipping on all exposed edges, complete with necessary hardware fittings such as stainless steel hinges, handles, magnetic catch / tower bolt, screws, etc., fixed in position, complete in all respects as per approved design and complete all as specified and directed. |
| 39 | S&F in repairs continuous (piano) hinges mild steel, bright finish width of flaps (when open) 30 mm, complete all as specified and directed. |
| 40 | Taking down shutters of any description from the frames and refixing in the same opening after repair of door rescuring or easing & adjusting etc, area exc. 1.00 Sqm but n.exc 2.00 Sqm each complete all as specified and as directed. |
| 41 | Taking down aluminium door shutter (and frame, if required) from existing position, carrying out rectification of door not closing properly/sagging, including alignment and adjustment of frame and shutter, tightening/replacement of hinges/pivots/rollers, correction of locking arrangement, replacement of minor fittings (screws, handles, rubber beading etc.), lubrication of all moving parts, and refixing the door in the same opening to correct line and level, including making good disturbed surfaces and ensuring smooth operation, complete all as specified and directed. |
| 42 | Taking down toughened glass door shutter (12 mm thick or as existing) along with all fittings, carrying out complete repair and rectification of door not closing properly/sagging, including repair of floor spring, top pivot, patch fittings, hinges, locking arrangement, handles, gaskets and all associated hardware, alignment of glass shutter, drilling/cut-outs if required, lubrication of all moving parts, and refixing the door in the same opening to correct line, level and plumb, ensuring smooth and proper operation, complete all as specified and directed. |
| 43 | Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets or Plain or corrugated steel sheeting,any gauge, thickness, in roof coverings in any position complete all as specified and directed. |
| 44 | S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed. |
| 45 | S & F in repair Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge, hips, valley gutter, drip and straight flashing fixed with self tapping screws complete all as specified and directed. |
| 46 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.. |
| 47 | S/F mild steel trusses (framed) purlins, rafters, crane gantries, rails and fastenings and heavy brackets framing (Beam, tee, angle, channel or flat sections)including distance pieces, cleats etc conforming to Fe-410-W Gde- E- 250 (qualaity B) complete all as specified and directed. |
| 48 | Framed work 410-W as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing including hinges welding complete all as specified and directed. |
| 49 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards / slabs / blankets, any thickness, including cover fillets complete all as specified and directed. |
| 50 | S&F in repair for Anodised aluminium snap grid frame work of size 605mm x 605mm for false ceiling, complete all as specified and directed. |
| 51 | M&L 06 mm thick non asbestos fibre cement building boards (size 600X600mm) fixed or laid / inserted to timber / GI / Aluminium frames work with screws as in ceiling flat or sloping incl refixing in position of electric wiring, lights and fittings etc, complete if exists complete all as specified and directed. |
| 52 | Providing and fixing 10-12mm thick Plaster of Paris (POP) false ceiling of approved design and pattern, including providing and fixing GI framework (consisting of perimeter channels, intermediate channels, ceiling sections, hangers, cleats etc.) properly suspended from RCC slab/roof with dash fasteners, including expanded metal / chicken mesh where required, applying POP in layers to required thickness (approx. 10–12 mm), finished smooth, levelled and aligned to required slope/levels, including forming coves, grooves, cut-outs for light fixtures, AC grills, etc., complete all as specified and directed. |
| 53 | S&F in repair PVC sheet wall lining consisting of 5mm thick colour / printed PVC sheet inclusive of solvent cement and fixing at site including PVC frame as per specifications, complete all as specified and directed. |
| 54 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed. |
| 55 | Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing coat, complete all as specified and as directed. |
| 56 | M&L Providing, cement concrete Type B-0 (1:2:4) (12.5mm graded crushed stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed. |
| 57 | M & L Cement concrete type B-0, 1:2:4 (12.5 mm graded crushed stone aggregate) 25mm thickness as in floor for laying tiles/flooring brushing with neat cement slurry @ 3.00 Kg/Sqm complete all as specified and directed. |
| 58 | M&L for providing 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded curshed stone aggregates as in plinth protection laid in alternate bays (n exc 2 Sqm each) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and directed. |
| 59 | M & L Non-skid ceramic coloured tiles 8mm thick(square or rectangular) coloured joint free area of each tiles exc 0.06 sqm but not exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bedding layer of cement mortar in CM 1:6 complete all as specified and directed. |
| 60 | M&L for Non-skid Coloured Designer Ceramic Tiles (Square/rectangular) area of each tile exceeding 0.11 sqm but nexc 0.18 sqm, 7-8mm thick in floors etc set & jointed in neat cement slurry & pointed in white or coloured cement to match including screed bedding layer of 15 mm thick in CM 1:6, complete all as specified and as directed. |
| 61 | M & L for Glazed ceramic colored tiles 600mmx300mmx 6 to 7mm thick/450mm x300 mm x 7mm,as in patches in vertical surfaces such as dado, skirting, wall etc set & jointed in neat cement slurry and pointed with coloured cement to match with tiles in over and including 10mm thick cement plaster in cement mortar 1:4. complete all as specified and directed. |
| 62 | M & L for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles including 10mm thick 1:6 cm screed bed complete all as specified and directed. |
| 63 | M & L for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles including 10mm thick 1:6 cm screed bed complete all as specified and directed. |
| 64 | Demolition of stone slabs of any description or thickness in kitchen platform, floors,aprons laid, bedded,pointing in any mortar etc complete all as directed. |
| 65 | Material & labour for marble stone of 18mm to 20mm thick (table rubbed and polished) of approved shade/colour in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble over and including 15mm screed bed in CM 1:4 complete all as specified and directed. |
| 66 | M & L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with providing 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed. |
| 67 | M&L for machine cut Kota stone slab flooring 18-20mm thick, laid over and incl 15mm thick cement screed /rendering in CM 1:6 ,laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting, rubbing, gridding and polshing to achive mirror finish complete all as specified and directed. |
| 68 | M&L for machine cut Kota stone slab in riser of steps,skirting,dado and pillar, 15mm thick, mixed with pigment to match the shade of the slab incl 10mm thick cement screed /rendering in CM 1:4 incl cutting, rubbing, gridding and polshing to achive mirror finish complete all as specified and directed. |
| 69 | Demolition of brick work or stone masonry built in cement mortar including all quoines arches, pillar etc but excluding ashlar facing , dressed stone work and precast concrete articles complete all as specified and directed. |
| 70 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed. |
| 71 | M&L brick work with sub class B bricks straight or curved on plan exc 6m redius in CM 1:6 complete all as specified and as directed. |
| 72 | All as per ser item No 71 above but except bricks complete all as specified and directed. |
| 73 | M&L for brick work with sub class B bricks straight or curved on plan to any radious in half brick thick built in CM 1:4, complete all as specified and as directed. |
| 74 | M&L for Walling of random rubble, uncoursed, well bonded, bedded solidly hearted, built in cement mortar 1:4 except stone complete all as specified and directed. |
| 75 | All as per ser item no 74 above but except stone complete all as specified and directed. |
| 76 | M&L for plain cement concrete 1:4:8, type D-2 (using 40mm graded crushed stone aggregates) as in foundation, filling & mass concrete complete all as specified and directed. |
| 77 | M&L for PCC 1:3:6 Type C-2 (using 40mm graded crushed stone Aggregate) as in foundations, filling and mass concrete complete all as specified and directed. |
| 78 | M&L for Cement concrete Type C2 (1:3:6) using 40 mm graded crushed stone aggregate in surface channels and drains complete all as specified and directed. |
| 79 | M&L for Reinforced cement concrete (Nominal mix) M-25 (using 20mm graded crushed stone aggregate) as in beams, cantilivers, bressummers, lintels over 1.5 m span complete all as specified and directed. |
| 80 | M&L for use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. on flat rough finished surface of concrete complete all as specified and directed. |
| 81 | M&L for Reinforced cement concrete (Nominal mix) M-25 (using 20mm graded crushed stone aggregate) as in foundation including raft footing, foundation beam, plinth beam, bases of columns etc basement slab under reamed piles and mass concrete complete all as specified and directed. |
| 82 | M&L for use and waste of formwork to sides of concrete foundation, footings, bases of columns, raft and raft beams, sides & soffits (if any) of foundation and plinth beams and similar work, vertical or to batter including rough finished surfaces of concrete complete all as specified and directed. |
| 83 | M&L for Reinforced cement concrete (Nominal mix) M-25 (using 20mm graded crushed stone aggregate) as in Columns, pillars, piers, posts and struts, complete all as specified and directed. |
| 84 | M&L for use and waste of formwork to sides of pillars, struts, piers, columns and stanchions including rough finished surfaces of concrete, square, rectangular or polygonal in sections concrete, complete all as specified and directed. |
| 85 | Providing, cement concrete Type B-0 1:2:4 (12.5mm graded crushed stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 86 | M&L for providing precast cement concrete (type B0 1:2:4 12.5mm graded crushed stone aggregate) louvres and jallies, 25mm thick (measured solid), including all mouldings and form work including demlation of old louvres and jallies complete all as specified and directed |
| 87 | M & L for Per- cast reinforced cement concrete M-15 (1:2:4 nominal mix ) type B-I, (Using 20mm grade crushed stone agg) set in cement mortar 1:4 as in manhole cover or cover slab complete all as specified and directed. |
| 88 | M & L for TMT MS bars 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns ends and binding with mild steel wire (annealed ) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 89 | M&L for mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups , spacers and binders including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 90 | M & L for Mild steel framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to E-165 (Fe-290) complete all as specified and directed. |
| 91 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion from cement concrete and making good disturbed ground complete all as specified and directed. |
| 92 | Excavation for post holes in any type of soil (or in similar hole ) each n.exc 0.50 Cum including dismantling PCC including disposal of surplus n.exc 50m complete all as specified and directed. |
| 93 | M&L for posts and struts in fencing of angle, tee including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or FE 310-0 complete all as specified and directed etc complete all as specified and directed. |
| 94 | M & L for Fixing chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and directed. |
| 95 | Supply only Chain link fencing with or without line wires,any type and mesh size and any type of standards and dia of wire ( as directed by Engineer-in-charge) fixed with rails, staining bolts etc including provision of binding wire including dismantling existing unserviceable fencing complete all as specified and directed..( rails, staining bolts will be measured in seperate Item) |
| 96 | Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long and 5 to 10mm dia of shank complete all as specified and directed |
| 97 | Taking down cement plaster of any description on brick, concrete or stone walls or ceiling including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off complete all as specified and as directed. |
| 98 | M&L for rendering 10mm thick CM 1:6 on fair faces of brickwork or concrete surfaces finished even & smooth w/o using extra cement complete all as specified and as directed. |
| 99 | M & L for Rendering 15mm thick in cement mortar 1:4 on Brick walls/ stone walls or on concrete surfaces, plastered surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 100 | M&L Rendering 5mm thick on fair faces of brick work or concrete surfaces in CM (1:3) in ceiling complete all as specified and as directed. |
| 101 | M&L for preparation of new plastered surface of wall and applying two coats of oil emulsion distemper over a coat of primer over 3mm thick wall care putty (in two or more layers) complete all as specified and directed. Note: (i) The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 102 | M & L for preparing new plastered surfaces of ceiling and applying two coats of oil emulsion distemper complete all as specified and directed. Note: (i) The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 103 | M & L for two coats of white wash on newly plaster surfaces of ceiling incl preparation of surfaces complete all as specified and as directed. |
| 104 | M & L Preparing new surfaces of walls and applying two coats of Cement base paint complete all as specified and as directed.Note: (i) The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 105 | M&L for preparation of new plastered/unplastered surface and finishing walls with Acrylic Smooth exterior paint of required shade as approved by GE with two or more coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) on walls over 3mm thick plaster of paris putty including necessary scaffolding for max height of G+2 bldg with parapet, etc complete all as specified and directed.Note:- (a) Each stage i.e. preparation of surfaces, application of primer, application of first coat, application of second coat will be got passed from Engr-in -Charge.(b) The acrylic emulsion paint work shall be carried out by using smart painting tools and techniques as specified in Particular Specifications and Contractor will have to produce necessary documents for purchase of smart painting tools or rent receipt of these tools along with bill/RAR.The bidders are requested take this aspect in consideration before quoting their rate and no claim on account of misunderstanding or otherwise shall be admissible on this account. (c) The painting is to be done in one or more shades as approved by GE. |
| 106 | M & L for Preparation of old decorated plastered or unplastered surface including cleaning by brooming down with steel wire brushing, scraping down smoke soot, moulded, moss, efflorscent salt, trading oil and greasy spots and applying with applicator one coat of white wash on walls complete all as specified and directed. |
| 107 | M & L for Preparation of old decorated plastered or unplastered surface including cleaning by brooming down with steel wire brushing, scraping down smoke soot, moulded, moss, efflorscent salt, trading oil and greasy spots and applying with applicator two coats of white wash on walls complete all as specified and directed. |
| 108 | M&L for preparation of old decorated plastered or unplastered surface including complete removal by machinary only, scraping down smoke soot, moulded, moss, efflorscent salt, trading oil and greasy spots and applying one coat of Oil emulsion distemper on walls complete all as specified and directed. |
| 109 | M&L for preparation of old decorated plastered or unplastered surface including complete removal by machinary only, scraping down smoke soot, moulded, moss, efflorscent salt, trading oil and greasy spots and applying two coat of Oil emulsion distemper on walls complete all as specified and directed. Note: (i) The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 110 | M&L for preparation of old plastered surfaces of ceiling and applying two coat of white wash on ceiling complete all as specified and directed. |
| 111 | M&L for preparation of old plastered surfaces of ceiling and applying one coat of oil emulsion distemper complete all as specified and directed. Note: (i) The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 112 | M&L for preparation of old decorated plastered or unplastered surface including complete removal by machinary only, scraping down smoke soot, moulded, moss, efflorscent salt, trading oil and greasy spots and applying one coat of cement base paint on walls (upto three storeyed bldgs) complete all as spd and directed. |
| 113 | M&L for preparation of old decorated plastered or unplastered surface including complete removal by machinary only, scraping down smoke soot, moulded, moss, efflorscent salt, trading oil and greasy spots and applying two coat of cement base paint on walls (upto three storeyed bldgs) complete all as specified and directed. Note: (i) The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 114 | M&L for preparation of old decorated plastered or unplastered surface including complete removal by brooming down with steel wire brushing, scraping down smoke soot, moulded, moss, efflorscent salt, trading oil and greasy spots and finishing walls with Acrylic Smooth exterior paint of required shade as approved by GE with two or more coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) on walls over 3mm thick plaster of paris putty including necessary scaffolding, for max height of G+2 bldg with parapet, etc complete all as specified and directed.Note:- (a) Each stage i.e. preparation of surfaces, application of primer, application of first coat, application of second coat will be got passed from Engr-in -Charge.(b) The acrylic emulsion paint work shall be carried out by using smart painting tools and techniques as specified in Particular Specifications and Contractor will have to produce necessary documents for purchase of smart painting tools or rent receipt of these tools along with bill/RAR.The bidders are requested take this aspect in consideration before quoting their rate and no claim on account of misunderstanding or otherwise shall be admissible on this account. (c) The painting is to be done in one or more shades as approved by GE. |
| 115 | M&L 3mm thick wall care putty on wall (in two or more layers) to prepare the surface even and smooth complete all as specified and directed. |
| 116 | M&L 3mm thick wall care putty on ceiling (in two or more layers) to prepare the surface even and smooth complete all as specified and directed. |
| 117 | M & L for applying two coat of synthetic enamel paint on new wooden surfaces over a coat of pink primer of any description over 10 cm width or girth complete all as specified and as directed. |
| 118 | M&L for preparation of old painted wood or wooden based surfaces of any description over 10cm width or girth not otherwise described and applying One coat of Synthetic Enamel Paint, complete all as specified and directed. |
| 119 | M&L for Preparation of new steel and iron surfaces of any description over 10 CM width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed. |
| 120 | M&L for preparation of old painted steel or steel based surfaces of any description over 10cm width or girth not otherwise described and applying One coat of Synthetic Enamel Paint,complete all as specified and directed. |
| 121 | M & L for Providing and applying two or more coats textured paint finish on walls/ surfaces as per approved shade and pattern, including surface preparation, priming, skimming, base coat, finishing coats, complete all as specified and directed. |
| 122 | M & L for Providing and applying camouflage paint on existing surfaces (concrete/brick/steel/wood) including complete removal of existing paint/coating/treatment by scraping, wire brushing, sanding, chemical treatment or mechanical means as required; thorough surface cleaning; application of primer where necessary; and applying approved multi-tone camouflage pattern and colors using brush/roller/spray, complete in all respects as per manufacturer's, specifications, complete all as specified and directed.Note: (i) The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 123 | M&L and taking down of existing unserviceable roof treatment materials and PCC/CM/Brick tiles padding etc from top of roof upto slab (complete depth) carefully by cutting chiseling, cleaning the surface by scraping brooming brushing etc and removing the rubbish from site exc. 500m but n exc 5.00 Km (Outside of MoD land) and applying roof treatment with the following specifications:- (a) Rendering 10mm thick in CM 1:3 with water proofing compound on cleaned concrete surfaces of roof and finishing the surfaces fair and even including curing the plastered surfaces for 07 days by ponding of water over the roof (Levelling course). (Note : Water proofing compound shall be paid and measured separtely). (b) Applying evenly first coat cold bitumen primer confirming to IS-3384-1986 @ 0.40 Ltr per square metre on the cleaned plastered surfaces. (c) Applying evenly second coat of blown hot bitumen of grade 85/25 @ 1.20 kg per square metre (confirming to IS-702) on primed surfaces. |
| 124 | (d) Applying third coat of APP modified membrane 3mm thick (minimum) and weight 3.60 Kg per square metre (reinforced) with polyster non woven fabric weighing not less than 150gms per square metre by torch application. The overlap shall not be less than 100mm on the transverse direction and 75mm on longitudinal direction respectively and sealing overlaps. (e) Applying one coat of aluminium paint on top of APP membrane. Notes :- (i) Payment against this item shall not be allowed till completion of all the stages of work for any slab.(ii) The work shall be executed through authorised applicators as per manufacturer's instructions after obtaining written approval from the GE. . |
| 125 | Supply only Integral Liquid Water Proofing compound, complete all as specified and directed. |
| 126 | Disconnecting existing water tanks exc 250 & n.exc 500 Ltr capacity , setting aside (or lovering if required ) and cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes and reconnecting and re-fixing in position all complete all as specified and directed. |
| 127 | Disconnecting existing water tanks exc 500 & n.exc 1000 Ltr capacity , setting aside (or lovering if required ) and cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes and reconnecting and re-fixing in position all complete all as specified and directed. |
| 128 | Taking up or down 15mm bore of steel tubing with connections for cleaning for refixing or removing to store/yardcomplete all as specified and directed. |
| 129 | S&F for steel water tubing of nominal bore 15mm medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified and directed. |
| 130 | Fixing only water tubes of 15mm dia of any grade to walls and ceiling or laying in floor, complete all as specified and directed. |
| 131 | Taking up or down 20mm bore of steel tubing with connections for cleaning for refixing or removing to store/yard complete all as specified and directed. |
| 132 | M&L for steel water tubing of nominal bore 20 mm, medium grade galvanised with all fittings including short lengths, laid in trenches complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified and directed. |
| 133 | Fixing only water tubes of 20mm dia of any grade to walls and ceiling or laying in floor, complete all as specified and directed. |
| 134 | Cuttings chases for concealed water tubing of concealed conduit (cutting n.exc 10 cms girth) and making good in CM ( 1:3) in brick walls complete all as specified and directed. |
| 135 | Dismantling and removing to water storage tanks of capacity exceeding 250 liters but not exceeding 500 ltrs and removing to stores complete all as specified and directed. |
| 136 | Dismantling and removing to water storage tanks of capacity exceeding 500 liters but not exceeding 1000 ltrs and removing to stores complete all as specified and directed. |
| 137 | S&F in repair for 500 ltrs capacity rotational moulded polythylene water storage tank trippled layer (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed. |
| 138 | S&Fin repair for 1000 ltrs capacity rotational moulded polythylene water storage tank trippled layer (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed. |
| 139 | S & F in repairs, 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms. complete all as specified and as directed. |
| 140 | Supply and fixing in repairs Gun-metal, globe or gate valves of 20mm bore with half turn lever arm /iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 141 | Supply and fixing in repairs tank cover black/white (with arrangement for locking) of water storage tank of any capacity complete all as specified & directed. |
| 142 | Supply and fixing Vitreous China Urinal, Half stall type, white with PTMT waste fitting, PVC waste pipe, brass CP urinal spreader including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws complete all as specified and directed. |
| 143 | S&F in repairs CP brass urinal spreader of 15 mm (1/2\\") size, heavy duty, complete with all necessary fittings, washers, nuts, and connections, fixed to wall-mounted urinal to ensure uniform water distribution, including making good connections and testing, complete all as specified and directed. |
| 144 | S&F in repair Urinal partition of 8 mm thick frosted glass, size 900×450 mm, complete with chrome fittings and fixing arrangements, complete all as specified and directed. |
| 145 | S&F in repairs vitreous china wash down Water Closet white squatting pan Orissa pattern size 580x440mm with integral foot rest incl making necessary connections to soil pipes and flushing cistern complete all as specified and as directed. |
| 146 | S/F in repair Vitreous china wash down water closet Pan (pedestal Pattern) white colour (excluding fixing bolt, flushing cistern and flush pipe) size 580 x 440mm with integral foot rest connecting flushing cistern and flush pipe complete all as specified and as directed. |
| 147 | S&F in repairs One piece WC incl flushing cistern and soft closing seat cover and all connected items complete all as specified and directed. |
| 148 | Supply and fixing wall hung European Water Closet (EWC) of approved make and approved size, vitreous china of approved colour, complete with concealed cistern of dual flush capacity (3/6 litres), heavy duty wall mounting frame, soft close seat cover, flush plate, and all necessary fittings and fixtures including inlet/outlet connections, bolts, nuts, rubber gasket, and cutting/chasing in wall and making good the disturbed surfaces, complete in all respects as directed and specified. |
| 149 | S&F in repairs for PVC Flushing Cistern 10 litre capacity low level valve less, symphonic action type white with inlet, ball valve, float and handle including 32mm dia PVC Flush pipe a pair of cast iron brackets duly painted/erecting stand including cutting and pinning in ends, making good disturgbed surfaces in cement mortar 1:3 including taking down unserviceable flushing cistern complete all as specified and directed. |
| 150 | S & F in repairs, Plastic water closet seat cover, white closed pattern with flat bottom and cover and Brass chromium plated hinging device complete all as specified and directed. |
| 151 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. |
| 152 | S&F in repair CP Seat jet with one meter PVC tube complete all as specified and directed. |
| 153 | S&F in repair Vitreous china Wash Hand Basin size 550x400mm (flat back or angle back type) including 32mm dia brass chromium plated waste fitting a pair if cast iron bracket duly painted/erecting stand including cutting and pinning in ends making good disturbed surfaces in CM 1:3 including taking down unserviceable wash hand basin and connected items of any description, complete all as specified and directed. |
| 154 | Supply and fixing in repairs of vitreous china WHB white flat back size 550mmx400mm with pedestal on new brackets excluding taps waste china & plug including bracket etc complete all as specified and directed. |
| 155 | S & F in repairs,Wash basins, vitreous china white of counter top/ table top, excluding taps, waste chain and plug and porcelain stopper but including brackets and 32mm dia waste fittings brass chromium plated with long screwed shanks and fly nuts, 32mm x 600mm long PVC waste pipe complete flange end bedded in red lead cement and other end fixed as in repair complete all as specified and directed. |
| 156 | S&F in repair angular Stop/Angle valve fancy type chromium plated,screwed down, high pressure with crutch or butterfly handle 15mm bore, complete all as specified and directed. |
| 157 | All as per ser item no 155 above but concealed type complete all as specified and as directed. |
| 158 | S&F in repair Brass chromium plated mixer for mixing hot & cold Water screwed down for iron pipe 15mm bore complete all as specified and as directed. |
| 159 | S&F in repair wall mixer (non-telephonic) made of CP brass, 15 mm size, with provision for overhead shower, complete with operating lever/knobs, wall flanges, connecting nuts, washers, and all necessary fittings, fixed to hot and cold water supply lines, and making good to wall surfaces, complete all as specified and directed. |
| 160 | S&F in repair wall mixer (telephonic type) made of CP brass, 15 mm size, with overhead shower provision, including hand shower, flexible hose (1.0–1.5 m long), wall hook, CP brass fittings, and all accessories, complete with connections, testing, and making good, complete all as specified and directed. |
| 161 | S&F in repair, Bib taps cast copper alloy 15mm bore, fancy type Chromium Plated , screwed down high pressure with crutch or butterfly handle, screwdd both ends for iron pipe or for unions, complete all as specified and as directed. |
| 162 | S&F in repair bib taps 15mm bore long body, fancy type, cast copper alloy chromium plated with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed, complete all as specified and directed. |
| 163 | Supply and fixing in repairs 15 mm bib tap standard of PTMT any colour high pressure screwed for iron pipe & fixed minimum weight 90gm/each complete all as specified and directed. |
| 164 | S&F in repairs sink cock (wall mounted) with long swivel spout and wall flange complete all as specified and directed. |
| 165 | S&F in repairs sink mixer (wall mounted) with 190 mm (7.5\\") long swivel spout connecting les and wall flanges complete all as specified and directed. |
| 166 | S&F Pillar cock 15mm bore fancy type chromium plated, screwed down high pressure with or without lettered HOT or COLD with long screwed and fly-nuts screwed for iron pipe or brass ferrule and fixed in repair complete all as specified and directed. |
| 167 | Supply and fixing in repair chromium plated brass swan neck pillar tap of approved make, 15 mm nominal bore, with elegant gooseneck spout, complete with operating lever/knob, aerator, and all necessary fittings including nuts, washers, PTFE tape, and connection to existing water supply line, cutting and making good the disturbed surfaces, complete in all respects as directed. |
| 168 | S&F in repair mirror cabinet with PVC body and openable shutter, shelves and size 350 mm x 450 mm complete all as specified and directed. |
| 169 | S&F in repair Looking mirror 600 x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified and directed. |
| 170 | S&F in repair CP Towel Rail 600mm long fancy type fixed with and including chromium plated brass screws and plastic cleats complete all as specified and directed. |
| 171 | Supply and fixing in repair chromium plated brass towel ring of approved make and design, complete with concealed wall mounting arrangement, including necessary screws, rawl plugs, washers, and fixing accessories, drilling holes in wall and making good the disturbed surfaces, complete all as specified and directed. |
| 172 | S&F corner glass shelf of approved make and approved size, made of 5–6 mm thick toughened glass with polished edges, complete with chromium plated brass/stainless steel brackets and concealed wall mounting arrangement, including necessary screws, rawl plugs and fixing accessories, drilling holes in wall and making good the disturbed surfaces, complete all as specified and directed. |
| 173 | S&F in repair CP Soap Dish fixed in wall complete all as specified and as directed. |
| 174 | S & F in repair chromium plated brass toilet paper holder (flap type) of approved make and design, complete with hinged cover (flap), concealed wall mounting arrangement, including necessary screws, rawl plugs, washers and fixing accessories, drilling holes in wall and making good the disturbed surfaces, complete all as specified and directed. |
| 175 | S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard and railing 60cm long complete all as specified and as directed. |
| 176 | S&F in repair CP Grating doom 100mm dia complete all as specified and directed. |
| 177 | S&F in repair CP Grating doom 125 mm dia with waste hole complete all as specified and directed. |
| 178 | M&L for PVC Conncetions 15mm size with PTMT Nuts of length 450mm and fixed including taking down unserviceable PVC Connections, complete all as specified and as directed. |
| 179 | S&F PVC waste pipe 32/40mm dia for WHB complete all as specified and as directed. |
| 180 | S&F in repairs Brass chromium plated shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union, complete all as specified and directed. |
| 181 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed. |
| 182 | Dismantling cast-iron/PVC pipes including fittings taking out of trenches or walls as required dia of pipe upto 110mm complete all as specified and directed. |
| 183 | S&F in repair PVC (SWR) pipes, 110mm dia, single socketed, in any length with rubber ring joints, fixed to walls or laid in trenches or floors, complete all as specified & as directed. |
| 184 | S&F in repair PVC (SWR) pipes, 75mm dia, single socketed, in any length with rubber ring joints, fixed to walls or laid in trenches or floors, complete all as specified & as directed. |
| 185 | S&F in repair PVC (SWR) 75mm dia floor trap, plain with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed. |
| 186 | S&F in repair PVC (SWR) bends 75mm bore complete all as specified and as directed. |
| 187 | S&F in repair PVC (SWR) bends 110mm bore complete all as specified and as directed. |
| 188 | S&F in repair PVC (SWR) 110mm bore branch piece, single (single Y) equal or unequal provided with access door complete all as specified and as directed. |
| 189 | S&F in repair PVC (SWR) 110mm bore branch piece, double (double Y) equal or unequal provided with access door complete all as specified and as directed. |
| 190 | S&Fin repair PVC (SWR) 75mm bore Vent cowl complete all as specified and as directed. |
| 191 | S&F in repair Stack clamps made out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100mm bore, complete all as specified and directed. |
| 192 | S&F in repairs, Stainless steel plate rack of approved make and design, of size 600 mm to 900 mm length (as approved by Engineer-in-Charge), comprising dish holding slots for plates and flat space for utensils, side supports, and wall mounting brackets, finished in mirror/matt polish, made from minimum 0.6 mm thick sheet and 4–6 mm dia rods, fixed to wall using stainless steel screws, rawl plugs and suitable fasteners, including drilling in wall/tiles, proper alignment, leveling, and making good to adjoining surfaces, complete all as specified and directed. |
| 193 | S&F in repairs, sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed. |
| 194 | M&L for PCC 1:5:10 Type E-2 (using 40mm graded crushed stone Agg) as in foundations, filling and mass concretecomplete all as specified and directed. |
| 195 | M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 196 | M&L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness with grey cement and pigment, M-40 Grade etc complete all as specified and directed. |
| 197 | M & L Chequered cement concrete tiles of size 20cm x 20cm x 25mm thick (with grey cement and pigments) set, jointed and pointed in neat cement slurry in floor,laid over and incl 15mm thick cement screed base in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting, rubbing, grinding complete all as specified and directed. |
| 198 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever requiredcomplete all as specified and directed. |
| 199 | Taking down carefully unserviceable Aluminium point wiring complete (light, fan socket, bell or power) with fitting such as switches, ceiling rose lamp holder, regulators, sockets, light fittings etc. and keeping in safe custedy for taking credit complete all as specified and directed. Please Enable Macros to View BoQ information |
| 200 | Taking down carefully unserviceable Aluminium point wiring complete (light, fan socket, bell or power) with fitting such as switches, ceiling rose lamp holder, regulators, sockets, light fittings etc. and keeping in safe custedy for taking credit complete all as specified and directed. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
