|
| 1 | Taking down Chowkats or frames with shutters (Without taking off shutters from the frames) not exceeding 1.5 Sqm each including iron mongries, hold fast etc and including making good disturbed portions of walls in CM 1:4 complete all as specified and directed. |
| 2 | Taking down Chowkats or frames with shutters (Without taking off shutters from the frames) exceeding 1.5 sqm but not exceeding 4.0 Sqm each including iron mongries, hold fast etc and including making good disturbed portions of walls in Cm 1:4 complete all as specified and directed. |
| 3 | Taking down shutters of any description n exc 1.00 sq. m each each complete all as specified and directed. |
| 4 | Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and directed. |
| 5 | S&F 125mmx60mmx1.25mm thick pressed steel, frames for door with one or more rebates including filling and compaction with PCC (1:3:6) Type C-1 using 20 mm graded stone aggregate, necessary fixing lugs, hinges, lock strike plate, etc, complete including wooden texture finished paint on the frame surface complete all as specified and directed |
| 6 | S&F 105mmx60mmx1.25mm thick pressed steel, frames for door with one or more rebates including filling and compaction with PCC (1:3:6) Type C-1 using 20 mm graded stone aggregate, necessary fixing lugs, hinges, lock strike plate, etc, including wooden texture finished paint on the frame surface complete all as specified and directed. |
| 7 | S & F 30 mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including teakwood lipping 6mm thick fixed with nails complete all as specified and directed. |
| 8 | M & L for 35mm thick plain framed glazed and skeleton shutter open rebated & prepared to receive glass, gauge etc, without sash bar edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc, of 2nd class hard wood , members of shutters as specified in SSR Part - I Section 8 clause 8.24 (a) fitted to chowkats complete all as specified and directed. |
| 9 | Supply and fix Solid PVC door frame of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube 47mmx47mm (19 gauge) all as specified and directed. |
| 10 | M&L for factory made solid panel PVC door flush shutter 30 mm thick (style) consisting of frame made out of one side prelam PVC sheet and other side plain pvc sheet. Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.complete all as specified and directed. |
| 11 | M&L for Plain Cement Concrete Type C1 1:3:6 (using 20 mm graded stone aggregate) as in holdfast and similar work etc complete all as specified and directed. |
| 12 | S & F 100 mm long medium weight, cold rolled stainless steel Butt hinges with screws complete all as specified and directed. |
| 13 | S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all specified and as directed. |
| 14 | S&F 250 mm long aluminium sliding door bolts plate type with bright bolt not less than 16 mm dia with and including a minimum of 6 bolts and nuts, 04 Nos on bolt plate and 02 Nos on staple plate and fix complete all as specified and directed. |
| 15 | S & F 150 mm long Aluminium alloy handles, cast type, anodised complete all as specified and directed. |
| 16 | S & F mild steel 300 mm long ordinary rat rail rod pattern helical door springs, including roller and roller plate complete all as specified and directed. |
| 17 | S & F in repair Galvanized mild steel wire cloth, 0.56 mm dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and directed. |
| 18 | S & F Galvanized mild steel wire cloth, 0.56 mm dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and directed. |
| 19 | S & F Sheet glass 3.0 mm thick, ordinary quality and glazing with oil putty or wooden beads exceeding 0.5 Sqm in each pane glazed with putty or fixed with beads complete all as specified and directed. |
| 20 | S & F in repair Sheet glass 3.0 mm thick, ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from wooden or metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. |
| 21 | S & F Figured glass, 4.0 mm thick, ordinary quality and glazing with oil putty or wooden beads exceeding 0.5 Sqm in each pane glazed with putty or fixed with beads complete all as specified and directed. |
| 22 | Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 23 | M&L Brickwork with subclass ‘B’ bricks, old size , straight or curved on plan exc 6m mean radius built in1:6 cement mortar including demolition of old brick work complete all specified and directed. |
| 24 | All as item no 23 above but except brick built in 1:6 cement mortacomplete all specified and directed. |
| 25 | Taking down cement plaster or cement lime plastering , any descriptuon from brick wall including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed. |
| 26 | M&L for rendering 12 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement. |
| 27 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 with water proofing compound finished even and fair without using extra cement complete all as specified and directed. (Water proofing compound wiil be measured and paid in respective item.) |
| 28 | M&L for rendering 10 mm thick on concrete surfaces like ceiling, chajja etc in cement mortar 1:3 and finished even and smooth without using extra cement icomplete all as specified and directed |
| 29 | M&L for preparation of new wall surfaces and applying Two coats of Oil bond distemper over a coat of primer with roller complete all as specified and directed. |
| 30 | M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint of approved shade/tint with roller complete all as specified.. |
| 31 | M&L for preparation of new plastered surfaces of Ceilling and applying three coats of White wash complete all as specified and directed. |
| 32 | M&L for providing and applying minimum 1 mm thick wall care putty over prepared surface of wall and scrubbing with mechnical sander to achive the surface even and smooth for painting complete all as specified and directed. |
| 33 | M&L for preparation of old treated surfaces of wall and applying Two coats of Cement based paint of approved shade/tint complete all as specified and directed. |
| 34 | M&L for preparation of old treated surfaces of wall and applying one coats of Cement based paint complete all as specified and directed. |
| 35 | M & L for preparation of old treated surface of wall/roof/Chajja projections including facia, cornices etc and applying two coat of weather proof exterior emulsion paint upto five story building with necessary scafolding complete all as specified and directed. Note- Emulsion to be carried out through air less spray machine ( Mechanical means), Shade and coloured as approved by Engr-in-Charge. |
| 36 | M&L for preparation of old treated surfaces of wall and applying one coats of oil bound distemper with roller complete all as specified and directed. |
| 37 | M & L for preparation of old treated surface of wall and applying two coats of oil bound distemper with roller complete all as specified and directed. |
| 38 | M&L for preparation of old treated surfaces of Ceilling and applying one coats of White wash complete all as specified and directed. |
| 39 | M&L for preparation of new wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coat of Synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified and directed. |
| 40 | M&L for preparation of old wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint) complete all as specified and directed. |
| 41 | M&L for preparation of new painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. |
| 42 | M&L for preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coats of synthetic enamel paint complete all as specified and directed. |
| 43 | M & L for machine cut kota stone slab flooring 18-20 mm thick over and including M&L for 15mm cement screed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing and dismantling of existing old floor or wall stone complete all as specified and directed. |
| 44 | M & L for machine cut kota stone 18-20 mm thick slab for skirting, dado, riser etc over and including M&L for 15 mm thick rendering in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and dismantling of existing old floor or wall stone/tiles and rounding of edge and polishing all as specified and directed. |
| 45 | M&L for Vitrified tiles coloured 8 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including M&L for 15 mm thick screed bed in cm 1:6 including dismantling existing tiles complete all as specified and as directed by Engineer-in-Charge. |
| 46 | M&L for Vitrified tiles coloured 8 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in walls or cladding or in skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including M&L for 10 mm thick rendering in CM 1:4 including dismentling existing tiles complete all as specified and as directed by Engineer-in-Charge. |
| 47 | M & L for non- skid ceremic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but notexceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling of existing old floor or wall tiling and including M&L for 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 48 | M&L for coloured printed glazed ceramic tiles 7 to 8 mm thick on walls dado/skirting (square/ rectangular) of 350mmx450 mm jointed and pointed with coloured cement to match including M&L for 10 mm thick rendering of cement mortar 1:4 and including dismantling of floor or wall tiling including cement mortar bedding complete all as specified or as directed. |
| 49 | Cleaning and removing all scale and dirt, etc from tanks capacity exc 250 ltr but n exc 500 ltr and from mouths of circulating pipes etc. complete all as specified and directed. |
| 50 | S & F 1000 Ltr Rotational moulded polyethylene water storage tanks triple layered (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old unserviceable water tank capacity exc 250 but n exc. 500 litre complete all as specified and directed. |
| 51 | S & F 500 Ltr Rotational moulded polyethylene water storage tanks triple layered (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old unserviceable water tank capacity exc 250 but n exc. 500 litre complete all as specified and directed. |
| 52 | Taking up or down 15 mm bore steel tubing and connections complete all as specified and directed. |
| 53 | Taking up or down 20 mm bore steel tubing and connections complete all as specified and directed. |
| 54 | S & F 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed. |
| 55 | S & F 20 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed. |
| 56 | Refixing 15 mm GI old steel tubing and connections in new or old position complete all as specified and directed. |
| 57 | Refixing 20 mm GI old steel tubing and connections in new or old position complete all as specified and directed. |
| 58 | S & F in repairs 15 mm bore CP Bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.complete all as specified and directed. |
| 59 | S&F in repair 15 mm dia brass chromium plated , pillar taps fancy type, cast copper alloy with capstan heads screwed down high pressure screwed for iron pipe with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts or as specified or as directed. |
| 60 | S & F in repairs 15 mm bore Chromium plated Angle/Stop valves fency type (straight or angular), cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 61 | S&F in repair CP wall mixer with connction for shower arrangement complete all as spd and directed |
| 62 | S&F in repairs centre hole basin mixture 15 mm dia chromium plated complete all as specified and directed. |
| 63 | S&F in repairs to CP Brass jet spray for EWC complete all as spd and directed |
| 64 | S&F in repairs to CP Brass Health faucet with 1 mtr tube with wall hook complete all as spd and directed |
| 65 | S&F in repair to toilet paper holder CP Brass fancy type |
| 66 | S & F in repairs Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed. |
| 67 | S&F for in repairs CP Brass Tubular towel rail, 20mm dia, D type, 60cm long between flanges with both side holders complete all as specified and directed. |
| 68 | S & F in repairs 20 mm bore gate valve , cast copper alloy complete all as specified and directed. |
| 69 | S&F in repairs Ball valves 15mm dia high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15 m m - 2 1 0 g m s ) complete all as specified and directed. |
| 70 | Supply and fix in repair 600mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood on PVC frame complete all as specified and directed. |
| 71 | S & F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers, waste coupling and waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915 mm x 460 bowl size 410mm x 330mm x 160mm fixed complete all as specified and directed. |
| 72 | S & F in repairs Vitreous China Ware Wash hand basin flat back, size 550mmx400mm in repairs including cutting for and pinning ends of brackets including PTMT waste coupling and PVC waste pipe 32 mm dia and PVC connection 450 mm long with PTMT nuts and fixed on a pair of MS cantilever bracket of appropriate size complete all as specified and directed. |
| 73 | S & F in repairs Vitreous China water closet Padestal pattern white, including mild steel chromium plated or aluminised hinging device seat cover size 630mmx450 mm size white with Cast Iron `P' or `S' trap, front or back inlet and including connection to trap and to flushing pipe, anti-syphonage pipe etc., including trap set in and including lime concrete bedding complete including making good to floor all as specified and directed. |
| 74 | S & F in repairs Vitreous China Squatting pan of Orissa pattern, size 580mmx440 mm size white with integral foot rest with Cast Iron `P' or `S' trap, front or back inlet and including connection to trap and to flushing pipe, anti-syphonage pipe etc., including trap set in and including lime concrete bedding complete including making good to floor (excluding flushing cistern and flush pipe)all as specified and directed. |
| 75 | S&F in repair vitreous China Urinal half stall type white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement mortar 1:3 including PTMT spreader, PTMT waste coupling, PVC waste pipe complete all as specified and directed. |
| 76 | S & F in repairs 10 litres PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including 32mm PVC pipe for low level cistern L type, brackets fixed on wall complete all as specified and directed. |
| 77 | S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 78 | S & F 110 mm bore PVC (SWR) Soil, waste and vent, rain water pipes, drain pipe single socketed in any length with rubber ring joints fixed on walls including desmenteling of old pipes complete all as specified and directed. |
| 79 | S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed. |
| 80 | S & F 75 mm bore PVC (SWR) Soil, waste and vent, rain water pipes, drain pipe single socketed in any length with rubber ring joints fixed on wallsand dismantling complete all as specified and directed. |
| 81 | S & F 75 mm bore PVC (SWR) bends of any radius including dismantling of old pipes complete all as specified and directed. |
| 82 | S&F in repairs pvc waste pipe 32mm dia 1mtr long complete all as specified and directed. |
| 83 | S & F in repairs 4mm thick E-Board tiles for insulation and acoustic purpose of size 600mmx 600mm fixed with and including Powder coated Aluminium snap grid with 25mmx25mmx1.5 mm thick Tee section and 38mmx25mmx2 mm thick angle with hanging/supporting arrangements as in false ceiling at bottom at spacing 60 cm centre to centre including necessary GI cleats and 4mm dia GI wire as suspender fixed to ceiling not exceeding 1.20 mtr centre both ways with dash fastners complete and making good disturbed surfaces complete all as specified and directed. |
| 84 | S & F in repairs Aluminium body (die cast) door closer hydraulically regulated, designation No. 2 universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 Kg. complete all as specified and directed.. |
| 85 | Supply and fix in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.. |
| 86 | S&F Prelam hollow PVC sheet wall panelling of thickness 5mm consisting panels of desired size stuck on inner frame work of 35mm wide strips of 5mm thick PVC sheet. The PVC strips shall be fixed to the wall using 65mm long MS screws through the groove in the strip by using PVC fastners. The distance between two screws shall not be more thant 200 mm. The strips shall be fixed to wall vertically at an equal interval of 10\\" between two PVC strips. A strip of 5 mm thick PVC sheet of width 75mm feathered at edges shall be stuck at the places where two panels are jointed, using solvent cement and including taking down existing PVC wall paneling complete all as specified and directed. |
| 87 | S&F in repairs 20 mm dia Stainless Steel fancy type drapery curtain rod with brackets and lattu & other connected accessories etc complete all as specified and directed. |
| 88 | S&F Aluminium section powder coated of colour as approved doors frame and shutters partly with 4.8 mm thick reflective glass and partly closed with 5 mm thick aluminium composite panel (alco panel) fixed with aluminium chamfered clip section no 4407 of aluminium door sections as under. (a) Frame 100mmx40x2mm section No-2420 (b) Shutter style 85mmx44.45mmx1.7mm thick section 4546 (i) Top rail 14.30mmx44.45mmx1.7mm thick section 4553 (ii) Middle rail 83.50mmx44.45mmx1.7mm thick section 4565 (iii) Bottom rail 114.30mmx44.45mmx1.7mm thick section 4529 (iv) glazing clip powder coated 0.7mm thick section no 4407 including 5.5mm th glass and 5mm alco pannels. (v) Handle stainless steel 300mm long as approved (vi) Tower bolt powder coated 9.90 mm dia & 200mm long section No 4002 (vii) Mortice lock 100mm 7 lever all as directed of Godrej make (ix) Rubber gasket white PVC (x) Namda rope to be fixed in the styles's groove for proper air tightness.(xi) Top guide rail to be provided as per requirment to withstand adequate load of shutter to be installed at site for easy movement of shutter.including T/D of old existing door with frame. |
| 89 | Repairing of aluminium door/window/ ventilator/ partition wall etc of any size / any number of panels including taking down & refixing (if required) for easy closing/ opening/ tightening of hinges or changing the position of hinges, adjustment of floor door spring of hydraulic door closure, adjustment of tower bolts, sliding bolts etc changing of mortice lock complete all as specified and directed by Engr-in-charge. |
| 90 | S&F in repair factory made PVC cupboard frame size 75mm X 40mm with a wall thickness of 5mm made out of extruded 5mm thick plain/prelam pvc sheet of density 600kg/cbm,having bottom width of 50mm and thickness of 10mm all four frame length reinforced with 19mmX19mm m.s sqaure tubes of 19 guage thickness brackets of 15mmX15mm m.s sqaure tubes the door frame shall be fixed to the wall using 80/100 ling ms screw through the frame by using pvc fastners minimum of 4 nos of screw to be provided for vertical member and 2 nos of screw to be provided horizontal member etc. complete all specified and directed. |
| 91 | supply and fix in repair factory made PVC cupboards flush type shutter of 30mm thick consisting of frame made out M S tubes of 19 guage thickness and size 19mmX19mm for stiles and rails. The inside panels shall consist of 20mm thick multichamber hollow PVC section of 1mm wall thickness , bonded usimg solvent cement/ cyanoacrylate adhesive with 5mm thick plain/ prelam PVC sheet, on the both sides of inside panels including necessary item to fix the shutters to frame such as 100mm stainless steel hinges (06 Nos shutter) , 100mm long handles(02 Nos each shutter ), 150mm long barrel tower (02 Nos each shutter), made of anodised aluminium and magnetic ball catch(01 Nos each shutter ) , for each pair of shutter , all four edges of panels to be sealed with lipping of 10mm thck and 20mm wide PVC sheet baton ( made by stickng 2 Nos PVC foam sheet of 5mm thickness usng PVC solvent cement adhesive) complete all as specified and directed |
| 92 | S&F in repair factory made PVC shelf/partition of required size consisting of panel of min 20mm thick WPC plain/color shelf/partiton of required size consisting of panel of min 20m thick WPC plain/colour shall provided 3 godges in size 18mmX18mm as per reqiored length. the front side of the edge visible in the front of the shelf/partiton etc required length, complete all as specified and directed PVC sheet using solvent cement etc . |
| 93 | S&F in repairs floor door stopper of aluminium alloy body and tongue in repair , anodised with hard drawn steel spring fixed in repair floor |
| 94 | S & F in repairs Powder coated aluminium frame for doors, windows, ventilators, Partition with one or more rebates including joining cleat for fixing etc with powder coated complete all as specified. |
| 95 | S&F in repairs ANODISED aluminium grill (anodised tranparents or dyed to required shade according to IS :1868 WITH MINIMUM ANODIC COATING OF Grade Ac15) of approved design/pattern, with approved standard section and fixing to the existing window frame with c.p brass /stainless steel screw @200mm centre to centre,including cutting the grill to proper opening size for fixing and operation of handlesa nd fixing approved anodised aluminium standard section around the opening ,including aluminium alloy wire cloth, .45mm nominal dia of wire and average width of aperture 1.40mm and fixing with aluminium wire staples all complete as per requirement and direction of Engineering-in-charge |
| 96 | Dismantling of plaster of paris ceiling (Gypsum anhydrous) to flat surface including framework and G.I. wire mesh complete all as specified and directed. |
| 97 | M&L POP (Plaster of Paris) false ceiling applying 10 to 12 mm thick POP finish over ceiling surfaces with wall care putty mixed with POP powder in ratio of 1:10 (a) PGI sheet of 26 gauge in angle shape of size 25 x 25 mm all around the wall complete.(b) Main runners of 26 gauge PGI sheet in angle shape of size 35mm x 25 mm at the interval of 90 cm centre to centre complete. complete including one dome not less than 1 metre dia and frame work complete all as described below : (c) Cross runners of 26 gauge PGI sheet in angle shape of size 35mm x 25 mm at 40 cm center to center complete.(d) Suspender/ hanger of 26 gauge of PGI sheets in angle shape of size 25mm x 25 mm fixed to soffits of roof by steel fastener complete.(e) S & F Chicken WIre Mesh 12.5mm (22SWG) |
| 98 | S & F making POP cornices 75/100 mm wide of required design as directed by Engineer-in-charge. |
| 99 | S & F Making POP Dome design( dia exc 90 cm but n.exc 120 cm) of required design as directed by Engineer-in-charge. |
| 100 | S & F mild steel 300 mm long ordinary rat rail rod pattern helical door springs, incl roller and roller plate complete all as specified and directed. |
| 101 | Cleaning the sunken floor surfaces by wire brushes removing dust and applying following operation :-(a) applying priming coat with bituminous primerconfirming to IS 3384. 1986 @ 0.5 Kg/Sqm(b) Applying a coat of hot bitumen grade 85/25 @ 1.20 Kg/Sqm confirming to Is -705-1998 for water proofing membrance(c) Applying of polymeric water proofing membrane weighting not less than 3 Kg/Sqm over entire area with overlapping and sealed. (d) Again Applyingtack coat of hot blown bitumen grade 85/25 @ 1.2 Kg/Sqm.over water proofing membrance (e) Spreading Dry sand @ 0.75 Kg/Sqm dusted over the bitumen indicated |
| 102 | M & L for PCC (1:5:10) type E-2, USING 40mm graded stone aggregate for fiiling up sunken floor over felt Aand dismatling as per direction by complete. |
| 103 | S&F of steel windows with pressed steel frame (size 95mm x 456 mm x 1.25mm) side hung shutter including box types hinge with steel handle , and steel pegs steel complete with glazed openable shutter with glazing bar (open out side) and wire gauged openable shutter without glazing bar (open in side )dovetails or welded complete all as specified and directed and all as per Drg NO TD/088 Dt 07 jan 2002 Note:-(a)tow shutter is wire gauged and glazed shall be fixed in one composite frame and both shutter shall be measured as one unite . (b)rate for filling of pcc in frame deemed to be included in quote rate.(c) ms grill shall be measured and paid including under relevant item of schedule |
| 104 | S&F in repair mild steel work in framed work such as grills, gratings , framed guard bars ,ladders etc,, with end of bars shoulders and /or riveted or forged into spikes , and similar work confirming to be Fe -290. Gde-E-165 complete all as specified and directed |
| 105 | M & L for Cement concrete 1:3:6 type C-1, using 20mm graded stone aggregate , in Plinth protection 50mm thick finished even and smooth without using extra cement including making joint 12mm wide to the full depth of PCC at every 3 mtrs and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete all as spd and directed |
| 106 | S&F aluminium anodised 125 mm hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed in repair with screws complete all specified and directed |
| 107 | Notes:- Tenderers may note that amount as given in schedule of credit will be deducted from the total amount to worked out the net contract sum at the time of Acceptance of tender. Please Enable Macros to View BoQ information |
