Tender For Petty Repair And Other Connected Maintenance Works At Svn Colony, , Key Personnel Qtrs, Site A & Ge Complex Under Age B/R-1 Of Ge (Nd) Visakhapatnam.
Tender Value
40 Lakhs
Estimated cost
Bid Submission
14 Jul 2026
2 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Visakhapatanam → Andhra Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Petty Repair And Other Connected Maintenance Works At Svn Colony, , Key Personnel Qtrs, Site A & Ge Complex Under Age B/R-1 Of Ge (Nd) Visakhapatnam.
BOQ
| Sl. No. | Item Description |
| 1 | SCHEDULE 'A' PART-I: B/R WORKS |
| 2 | Taking down shutters of any description n exc 1 sqm each upto 9th floor |
| 3 | Taking down shutters of any description exc 1 Sqm but n.exc 2 Sqm upto 9th floor |
| 4 | Taking down chowkats or frames not exc 1.5 sqm each without taking off shutters from the frame upto 9th floor. |
| 5 | Taking down chowkats or frames exc 1.5 sqm but not exc 4 Sqm each without taking off shutters from the frame upto 9th floor |
| 6 | Resecuring or easing & adjusting without taking down shutters of any description n.exc 1 Sqm each upto 9th floor |
| 7 | Resecuring or easing & adjusting without taking down shutters of any description exc 1sqm but n.exc 2 sqm upto 9th floor |
| 8 | Taking down shutters of any description n. exc 1 sqm each and refixing in same opening upto 9th floor |
| 9 | Taking down shutters of any description exc 1sqm but n.exc 2 sqm each and refixing in same opening upto 9th floor |
| 10 | S&F Mild steel Angles, bars, flats etc., as in supports for stiffening of fencing, wall ties, hold fasts, clamps, plain angle cleats for securing purlins and similar small articles confirming to Fe 410-0 or Fe-310-O upto 9th floor |
| 11 | M&L for Plain Cement Concrete Type C1 1:3:6 (using 20mm graded granite stone aggregate) cast in situ in lintels up to 1.5 M span, cills and other similar bands, plinth courses, parapets, copings, bed plates and the like including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of form work upto 9th floor |
| 12 | S&F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints upto 9th floor |
| 13 | S&F 30 mm thick factory made second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc, divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitered beads for securing glass etc all as per clause 8.24 (b) of SSR Part I 2009 upto 9th floor |
| 14 | S&F 35mm thick factory made second class hard wood, kiln seasoned and chemically pressure treated plain framed, panelled shutter with lock rail and panel of 9mm BWP Commercial ply or 12mm veneered particle board with commercial face veneers on both faces all as per clause 8.24 (a) of SSR Part I 2009 upto 9th floor |
| 15 | S&F 35mm thick factory made second class hard wood, kiln seasoned and chemically pressure treated plain framed, panelled shutter with lock rail and panel of 9mm BWP Commercial ply or 12mm veneered particle board with commercial face veneers on both faces all as per clause 8.24 (a) of SSR Part I 2009 upto 9th floor |
| 16 | S&F factory made solid fixed ventilator of size 50x47mm made out of extruded 5mm thick PVC sheet mitred cut at two corners and joined with 2Nos of 150mm long brakets of 15x15mm MS square tube, the two vertical porfiles are to be reinforced with 19 x 19 mm MS tube and 50% of portion is fixed with 3 mm thick pin headed/frosted glass and remaining portion is covered with wire mesh and 3 mm thick pin headed/frosted glass louvers including 12mm dia MS guard bars and necessary fixtures. |
| 17 | S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per specification and drawing up to 9th floor |
| 18 | S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frames shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width inside upto 9th floor |
| 19 | S&F butt hinges medium weight 100 mm long cold rolled mild steel upto 9th floor |
| 20 | S&F stainless steel butt hinges medium weight 100 mm long for PVC doors upto 9th floor |
| 21 | S&F in repairs butt hinges medium weight 100 mm long cold rolled mild steel upto 9th floor |
| 22 | S&F 75mm long medium weight MS butt hinges upto 9th floor |
| 23 | S&F in repairs 75mm long medium weight MS butt hinges upto 9th floor |
| 24 | S&F 100 mm aluminium anodised barrel tower bolt of extruded section upto 9th floor |
| 25 | S&F in repairs 100 mm aluminium anodised barrel tower bolt of extruded section upto 9th floor |
| 26 | S&F 100 mm aluminium handles, cast type anodised upto 9th floor |
| 27 | S&F in repairs 100 mm aluminium handles, cast type anodised upto 9th floor |
| 28 | S & F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section upto 9th floor |
| 29 | S & F in repairs 200 mm long Aluminium, anodised, barrel tower bolts of extruded section upto 9th floor |
| 30 | S & F 300mm long Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy upto 9th floor |
| 31 | S & F in repairs 300mm long Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy upto 9th floor |
| 32 | S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised upto 9th floor |
| 33 | S & F in repairs 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised upto 9th floor |
| 34 | S&F 150 mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor |
| 35 | S&F in repairs 150 mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor |
| 36 | S& F in repairs rubber beading 50 mm wide and 5 mm thick |
| 37 | Carefully removal of existing grill from windows and refix in new window including necessary screws etc upto 9th floor |
| 38 | S & F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire stapels including old or new beading complete all as specified and as directed upto 9th floor |
| 39 | S & F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire stapels including old or new beading complete all as specified and as directed upto 9th floor |
| 40 | Hacking out old broken glass (any thickness size quality or description) from wooden , steel or aluminium frames glazed with putty or fixed with wooden beads complete all as directed upto 9th floor |
| 41 | S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or beading in squares n.exc 0.5 sqm in each pane upto 9th floor |
| 42 | S&F in repairs 20mm dia aluminium curtain rod with brackets etc all as specified and directed |
| 43 | S&F in repairs Plate racks made out of 0.8 mm thick .stainless steel, of size 750x600x 250 mm all as specified and directed upto 9th floor |
| 44 | S & F in repairs 18/19 mm thick ply wood, BWR, exterior grade, commercial type, fixed with screws to timber frame work for built in cupboards, shelves,almirahs etc all as specified and as directed by Engineer in Charge. |
| 45 | S & F in repairs 0.8 to 0.9 mm thick decorative laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions all as specified and as directed. |
| 46 | M&L for preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of primer upto 9th floor |
| 47 | M&L for preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of primer upto 9th floor |
| 48 | Taking down cement plaster on brick work, racking out joints, hacking for key scrubbing down with water etc complete and removing outside MD land . |
| 49 | M&L for rendering 5mm thick in CM 1:3 on fair faces of ceiling surfaces finished even & smooth without using extra cement upto 9th floor complete all as directed |
| 50 | M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished the top surface even and smooth without using extra cement with necessary safety measures i.e.scaffoldings/hanging platform upto 9th floor complete all as directed |
| 51 | M&L for Preparing newly Plastered surfaces of walls and applying two coats of distemper oil emulsion (Oil bound washable distemper) over a Coat of chalk whitening complete all as specified and directed. |
| 52 | M&L for Preparing newly Plastered surfaces of ceiling and applying two coats of white wash, complete all as specified and directed |
| 53 | M&L for preparing old plastered or unplastered surfaces by brooming down and applying one coat of white wash on ceiling |
| 54 | M&L for preparing old painted wooden surfaces over 10cm width or girth and applying one coats of synthetic enamel paint all as specified |
| 55 | M&L for preparing old painted steel surfaces over 10cm width or girth and applying one coats of synthetic enamel paint all as specified |
| 56 | M & L for Complete removal of existing treatment and applying two coats of distemper oil emulsion over a coat of primer with necessary safety measures i.e.scaffoldings/hanging platform upto 9th floors complete all as specified and directed |
| 57 | M&L for Preparing old surfaces of walls by washing rubbing down and stopping of distempered and painted surfaces and applying one coat of distemper oil emulsion upto 9th floor |
| 58 | M & L Preparing old surfaces of walls by brooming and washing down and applying one Coat of exterior weather coat with necessary safety measures i.e.scaffoldings/ hanging platform upto 9th floors all as per specified and directed by engineer in charge. |
| 59 | Repair to leakage of bib taps,pillar cock, stop cock, PVC connection, waste pipes, angle valve, concealed valve, GI union joints of GI pipe and Re-fixing of bottle trap etc by changing the washers, spindles or any other minor accessories all as specified and directed |
| 60 | S&F in repairs PTMT bib tap 15mm dia with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete with check nut all as specified |
| 61 | S&F in repairs PTMT bib tap long body 15mm dia with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete with check nut all as specified |
| 62 | S&F in repairs bib taps 15mm bore (for iron pipe) cast copper alloy fancy type chromium plated butter fly handle screwed down complete all as specified. |
| 63 | S & F in repairs Bib taps long body, cast copper alloy, 15 mm dia, chromium Plated, fancy type with crutch or butterfly handle, screwed down for iron pipe and fixed etc. complete all as specified Make: Jaquar Catalogue No. CON-107KN or its equivalent as approved by GE upto 9th Floor |
| 64 | S&F in repairs chromium plated brass pillar taps 15mm bore cast copper alloy fancy type complete all as specifiedMake: Jaquar or its equivalent as approved by GE |
| 65 | S&F in repairs chromium plated brass shower 100/100mm arm heavy duty casted with wall flange complete all as specifiedMake : Jaquar or its equivalent as approved by GE |
| 66 | S&F in repairs angle/stop valves 15mm bore (for iron pipe) fancy type chromium plated screwed down high pressure with butterfly handle screwed both ends all as specified. |
| 67 | Repair to high/low level flushing cistern by adjusting the float valve and stop leakage of PVC connection and PVC/CI bend including replacing of rubber washer, check nuts, etc for any type of flushing cistern all as specified |
| 68 | S&F in repairs PTMT flush handle with adjustable lever and hook for low level flushing cistern all as specified. |
| 69 | S&F in repair 10 Ltr capacity PVC valveless, syphonic action type flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, complete all as directed. ( Make:JAQUAR/HINDWARE/CERA) |
| 70 | S&F in repairs Ball valves 50 mm dia high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe upto 9th floor |
| 71 | S&F in repairs Ball valves 20 mm dia high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe upto 9th floor |
| 72 | S&F in repairs Ball valves 25 mm dia high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe upto 9th floor |
| 73 | S&F in repairs Ball valves 15 mm dia high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe upto 9th floor |
| 74 | Removal of air lock/blockage of water in G I Tubing 15/20mm bore including taking down (if required) cleaning the pipe or fitting etc and refixing the same in position complete all as directed |
| 75 | Taking down existing PVC waste pipe and S&F new PVC flexible pipe 32/40 mm dia with socket, 60 cm long for WHB/Sink |
| 76 | S&F in repairs 45 cm long PVC connection with two no PTMT nut and rubber washers suitable for 15mm bore GI Pipe all as specified |
| 77 | S&F in repairs 60 cm long PVC connection with two no PTMT nut and rubber washers suitable for 15mm bore GI Pipe all as specified |
| 78 | S&F in repairs PTMT waste coupling 31/32mm bore |
| 79 | S&F in repair PTMT Grating 100 mm dia upto 9th floor |
| 80 | S&F in repair PTMT Grating 125 mm dia with waste hole upto 9th floor |
| 81 | S&F in repairs chromium plated grating of size 125mm dia (with hole or without hole) complete all as specified |
| 82 | S&F in repair 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls including taking down old pipe complete all as directed |
| 83 | S & F in repairs PVC bends 110mm dia complete all as specified and directed |
| 84 | S&F in repair 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls including taking down old pipe complete all as directed |
| 85 | S & F in repairs PVC bends 75mm dia complete all as specified and directed. |
| 86 | Cutting around existing pipe 100/75 mm dia in brick work including pipe joint and M&L for Cement mortar 1:1 including water proofing compound and curing minimum seven days and after confirming that no leakage and then making good to the entire satisfactation of the Engineer-in-Charge. |
| 87 | S&F in repairs plastic WC seat cover of any colour pedestal pattern , closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging devices complete all as specified |
| 88 | S&F in repairs 15mm dia concealed stop cock chromium plated with long screw down high pressure with crutch or butterfly handle screwed both end for iron pipe. |
| 89 | S&F in repairs 25 mm bore gun metal globe or gate valve with iron wheel heads screwed both ends for iron pipe . |
| 90 | S&F in repairs small GI fittings 15 mm such as socket ,tee elbow, nipple 75mm long ,union and reducer 20x15mm /reducer 20x25mm, tee of unequal size/ Elbow etc (as required at site) all as specified and directed |
| 91 | S&F in repairs small GI fittings 20 mm such as socket ,tee elbow, nipple 75mm long ,union and reducer 20x15mm /reducer 20x25mm, tee of unequal size/ Elbow etc (as required at site) all as specified and directed |
| 92 | S&F in repairs 15 mm bore gun metal globe or gate valve with iron wheel heads screwed both ends for iron pipe . |
| 93 | S&F in repairs 75 mm dia fancy type shower rose brass chromium plated with C P arms for 15mm bore GI pipe. |
| 94 | S&F 600mm x 450 mm bevelled edge mirror of selected quality glass mounted on chocolate colour PVC frame on wall with wooden plugs with chromium plated brass screw & cup washer complete |
| 95 | Draining out water from existing water storage tank and cleaning silt deposited therein, washing out with bleaching powder including taking down connection and refixing |
| 96 | S&F in repairs vitreous China squatting pan 'orissa' pattern white colour of size 580x440mm with integral foot rests including provision of lime concrete bedding and P traps all as specified |
| 97 | S&F in repairs wash down water closet (pedestal pattern) of any colour including fixing of bolts complete all as specified |
| 98 | S&F in repairs Vitreous china wash basin white flat back of size 550x400mm including cutting for and pinning in ends of brackets including fixing of 32 mm low density polyethylene pipes (LDPE) of pressure rating 6kg/cm2,coupling, PVC connection with 15 mm PTMTchecknuts, brackets complete all as directed |
| 99 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for sunken floors upto 9th floor complete all as directed |
| 100 | M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished fair and even without using extra cement and mixed with water proofing compound upto 9th floor complete all as directed Note : Water proofing compound shall be measured and paid separately under relevant item. |
| 101 | M & L for applying Nitto bond two coats on plastered surfaces as per manufacturer instructions etc upto 9th floor complete all as specified . |
| 102 | M & L for Plain cement concrete, 1:5:10, type E2, (using 40mm graded granite stone aggregate) as in filling and mass concrete etc in sunken floor upto 9th floor complete all as specified . |
| 103 | M&L for 25mm thick PCC 1:2:4, type B0 (using 12.5mm graded stone aggregate) as in sub base of floor upto 9th floor complete all as directed |
| 104 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish off the premises out side MD land |
| 105 | M&L for non skid ceramic colour tiles of size 400 x 400 x 7/8 mm thick, as in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match including screed bed of 15mm thick in cement mortar 1:6 complete all as specified |
| 106 | M&L coloured Non skid ceramic coloured tiles 7 to 8 mm thick (Square /rectangular) area of each tiles exceeding 0.06 Sqm but not exc 0.11 Sqm in floors set and jointed in neat Cement slurry and pointed in coloured cement to match including screed bed 15 mm thick In cm(1:6). |
| 107 | M&L for coloured glazed ceramic tiles of size 300x450 x 7 to 9 mm thick on vertical surfaces such as skirtings, dados and risers for steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including backing of 10mm thick in cement mortar 1:4 complete all as specified |
| 108 | M&L for Providing and injecting chemical emulsion for Anti Termite Treatment along the external wall below concrete or masonry apron using chemical emulsion at the rate of 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified |
| 109 | M&L for ATT at points of contact of wood work by chemical emulsion (in oil or kerosine based solution) @ 0.5 litre per hole by drilling 6mm dia holes at downword angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified |
| 110 | S & F in repairsHealth faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect all as specified. |
| 111 | M & L for patch work of area n.exc 0.50 Sqm for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement Mortar 1:6 and finished fair and even without using extra cement |
| 112 | M & L for patch work of area n.exc 0.50 Sqm for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement Mortar 1:4 and finished fair and even without using extra cement including mixing of water proofing compound wherever required as per manufactures instructions. |
| 113 | M & L for patch work of area n.exc 0.50 Sqm for Rendering 5mm thick on fair faces of brick work or concrete surfaces in cement Mortar 1:3 in ceiling of slab, chajja, roof projection, shelve etc and finished even and smooth without using extra cement. |
| 114 | Dismantling wrought iron or mild steel work of any description not otherwise provided for |
| 115 | S & F in repairs framed work such as grills grating, etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to FE 290, Gde E-165 complete all as specified and as directed upto 9th floor |
| 116 | M&L for preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of primer upto 9th floor |
| 117 | Dismantling plain or corrugated steel sheeting any gauge thickness including Naintal or similar pattern roof coverings |
| 118 | M&L for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 119 | M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 120 | Demolition of reinforcement cement concrete as in cover slabs complete all as specified and directed. |
| 121 | Providing precast ce ment concrete type B1, 1:2:4 (20mm graded aggreage) in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces |
| 122 | M&L for mild steel TMT bars 10 mm and over cut to length bent to shape required including cranking, bending, spirally for hoping ends and binding with mild steel wire annealed not less than 0.90 mm dia as in reinforcement complete all as specified |
| 123 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches pillars etc.., but excluding ashlar facings dressed stone work and precast concrete articles |
| 124 | M & L for brick work with Fly ash bricks straight or curved on plan exceeding 6m mean radius built in cement mortar (1:6). |
| 125 | M&L brick work with flyash bricks,straight or curved on plan to any radius in half brick thick walls built in cm(1:4) |
| 126 | Taking down cement plaster on brick work, racking out joints, hacking for key scrubbing down with water etc complete and removing outside MD land . |
| 127 | M & L for rendering to brick / concrete surfaces, 15 mm thick in Cement Mortar 1:4, including mixing water proofing compound as per manufacturers instructions and finishing the top surface even and smooth without using extra cement complete upto 9th floor all as specified and as directed.Note: Water proofing compound will be measured and paid separately. |
| 128 | M&L for Preparing newly Plastered Surfaces of walls and applying two coats of cement base paint over a coat of primer, complete all as specified and as directed |
| 129 | Supply only Water proofing compound of approved make upto 9th floor Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysJul 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender