Tender For Comprehensive Repair And Maintenance And Periodical Services To Jcos/Or Md Accn At Bana Singh Enclave And Phillaurah Enclave Under Of Ge (South) Delhi Cantt-10.
Tender Value
80 Lakhs
Estimated cost
Bid Submission
21 Jul 2026
13 days left
EMD
1.45 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Repair And Maintenance And Periodical Services To Jcos/Or Md Accn At Bana Singh Enclave And Phillaurah Enclave Under Of Ge (South) Delhi Cantt-10.
BOQ
| Sl. No. | Item Description |
| 1 | M&L for complete removal of existing treatment under (OBD/Oil paint/ white wash etc) by scrapping with mechanical wall sander on wall/ceiling (having mechanical vacuum mechanism) having RPM not less than1500, sending pad of 80 grit having dia of 7\\"/9\\" to make the surface free from dust, loose paint , removal of nails etc and filling cracks/ holes and windows /doors jams by putty & repairs in good shape by skilled labour and applying of wall care putty (Birla white) on any surface 1-2mm thick average layer including complete removing of existing tratments then applying two coat of oil bound distemper on wall/ceiling using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 Mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by pain manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed. Make Asian or equivalent. |
| 2 | M&L for preparation of old decorated plastered or unplastered surfaces of walls by brooming down or by steel wire brushes, scraping down smoke spots, moulds, moss and elllorescent salts, trading oil, gresey spots etc, and applying one coat of cement base paint on wall surface complete all as specified. |
| 3 | M&L for 15 mm thick rendering on wall surface with readymix plaster (as per manufaturer's instruction) on face of brick or concrete surfaces finished even and smooth surface without using extra cement including taking down of existing plaster complete all as specified and as directed. Make of ready mix plaster : Birla Aerocon/Ultratech radiplast/ACC acoplast.Note :- Contractor shall be bounded to carryout repair / maint upto G+3 storey building and the rate shall be deemed including scafolding / double scafolding, safety equipments and misc accessories. |
| 4 | M&L for 10 mm thick rendering with readymix plaster (as per manufaturer's instruction) on face of brick or concrete surfaces finished even and smooth surface without using extra cement on wall of up to three stories bldgs including taking down of existing plaster including taking down of existing plaster complete all as specified and as directed. Make of ready mix plaster : Birla Aerocon/Ultratech radiplast/ACC acoplast.Note :- Contractor shall be bounded to carryout repair / maint upto G+3 storey building and the rate shall be deemed including scafolding / double scafolding, safety equipments and misc accessories.Note :- Contractor shall be bounded to carryout repair / maint upto G+3 storey building and the rate shall be deemed including scafolding / double scafolding, safety equipments and misc accessories. |
| 5 | M&L for 5 mm thick rendering on ceiling surfaces with readymix plaster (as per manufaturer's instruction) on face of brick or concrete surfaces finished even and smooth surface without using extra cement on wall of up to three stories bldgs including taking down of existing plaster complete all as specified and as directed. Make of ready mix plaster : Birla Aerocon/Ultratech radiplast/ACC acoplast. |
| 6 | M&L for applying two coats of cement base paint on walls after preparation of newly plastered surfaces complete all as specified. |
| 7 | M&L for preparation of newly plastered surfaces of wall and applying 1 to 2 mm thick wall care putty on whole surfaces to achieve smooth, even and uniform surface including grinding with sand paper and levelling of surface and applying two coats of oil bound distemper on white or tinted over existing prepared putty base surface complete all as specified and as directed. |
| 8 | M&L for preparation of old painted wooden surfaces of any description not other wise described over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified. |
| 9 | M&L preparation of old painted steel or steel based surfaces by any discription not other wise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified. |
| 10 | M&L for preparation of newly plastered surfaces of walls and to prepare the surface even and smooth and finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) over 1mm thick wall care putty (Sanding of the putty surface before applying exterior primer / Acrylic Smooth exterior paint with TruCare wall sander: L-01/H-01 or equivalent (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above having dia of 7”/9” to make the surface free from dust etc. by skilled labour), complete all as specified and as directed. Note :- Contractor shall be bounded to carryout repair / maint upto G+3 storey building and the rate shall be deemed including scafolding / double scafolding, safety equipments and misc accessories. |
| 11 | M&L for preparation of Old plastered surfaces of walls and to prepare the surface even and smooth and finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) over 1mm thick wall care putty (Sanding of the putty surface before applying exterior primer / Acrylic Smooth exterior paint with TruCare wall sander: L-01/H-01 or equivalent (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above having dia of 7”/9” to make the surface free from dust etc. by skilled labour), complete all as specified and as directed. Note :- Contractor shall be bounded to carryout repair / maint upto G+3 storey building and the rate shall be deemed including scafolding / double scafolding, safety equipments and misc accessories. |
| 12 | Supplying and laying of CPVC 20 mm dia pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all brass fitting (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) including taking down of existing GI steel tubing complete all as specified and as directed. |
| 13 | Supplying and laying of CPVC 25 mm dia pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all brass fitting (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) including taking down of existing GI steel tubing complete all as specified and as directed. |
| 14 | Supplying and laying of CPVC 32-40 mm dia pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all brass fitting (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) including taking down of existing GI steel tubing complete all as specified and as directed. |
| 15 | S&F in repairs PVC connections 450/600mm long with brass unions at both ends suitable for 15mm bore pipe complete all as specified and as directed. |
| 16 | S&F in repairs 15 mm angle valve/ stop valves, cast copper alloy, chromium palted, fancy type screwed down high pressure with crutch and butter fly handles , screwed with iron pipes or for union complete all as specified and as directed. |
| 17 | S&F in repairs Bib tap brass chromium plated fancy type, long body with flange screwed down, screwed for iron pipe 15 mm bore complete all as specified and as directed. |
| 18 | S&F in repairs 15mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe and fixed complete all as specified and as directed. |
| 19 | S&F in repairs 15 mm dia WHB mixer chromium plated screwed down high pressure with crutch or butterfly handle screwedboth ends for iron pipes or for unions and fixed complete all as specifie and as directed. |
| 20 | S&F in repairs 15 mm dia Wall mixer chromium plated screwed down high pressure with crutch or butterfly handle screwedboth ends for iron pipes or for unions and fixed complete all as specifie and as directed. |
| 21 | S&F in repairs 15 mm dia Sink mixer chromium plated screwed down highpressure with crutch or butterfly handle screwedboth ends for iron pipes or for unions and fixed complete all as specified. |
| 22 | S&F in repairs brass chromium plated overhead shower rose 125mm dia, with revolving joint and shower rod to fixed to 15mm bore pipe complete all as specified and as directed. |
| 23 | S&F chromium plated ABS body health faucet alongwith 1.00 to 1.50 meter good quality SS flexible connection pipe suitable for 15mm bore pipe complete all as specified and as directed. |
| 24 | S&F in repairs 15 mm size brass chromium plated two way bib cock fancy type cast copper alloy complete all as specified and as directed. |
| 25 | S&F in repairs of plastic WC seat cover white / off white closed pattern with flat bottom end cover and mild steel CP hinging device complete all as specified and as directed. |
| 26 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern) / EWC , white fixed in repair,including sheet cover of closed pattern with flat bottom and mild steel chromium plated or aluminiumised hinging devicecomplete all as specified and as directed. |
| 27 | S&F in repairs PVC valveless, syphonic action type flushing cisterns 10 ltrs capacity, low level , white, with inlet ball valves , float and handle including brackets and pvc flush pipe 32 mm dia for low level complete all as specified and as directed. |
| 28 | S&F in repairs vitreous china wash basin, white, flat back, size 450 x 300mm, including necessary waste pipe and coupling, brackets and cutting for and pinning in ends of brackets complete all as specified and as directed. |
| 29 | M&L for welding in repairs exc 2.5 cm but not exc. 5.0 cm in length thickness of metal be welded exc 6mm but n.exc 9mm complete all as specified and as directed. |
| 30 | S&F in repairs Plate rack made of stainless steel 785x760x250x0.63mm complete all as specified and directed. |
| 31 | M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in floor and finished even and fair without using extra cement complete all as specified. |
| 32 | M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) (in patches also) (area of each tile exceeding 0.06 sqm but not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 complete including dismantlling of existing floor tiles all as specified and as directed. |
| 33 | -------ditto ----- but on vertical surfaces as in skirting including 10 mm thick rendering as backing coat to receive the tiles on fair faces of brick /concrete surfaces in cement mortar 1:3 and finished even and rough complete including dismantlling of existing wall skirting tiles all as specified and as directed. all as specified and directed. |
| 34 | M&L for joint free glazed ceramic coloured tiles in vertical surface, area of each tiles n.exc 0.72 Sqm (in patches also) set and jointed in neat cement slurry and pointed in white or colour cement to match over and including backing coat/ plaster 10 mm thick on fair faces of brick work in CM 1:4 surfaces to receive tiles including dismantlling of existing wall tilescomplete all as specified and as directed. |
| 35 | M&L for vitrified ceramic tiles (light shade), 8 to 9mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.72 sqm, as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed bed or bedding layer of mortar 15 mm thick in CM 1:6 including dismantlling of existing wall tilescomplete all as specified and as directed.complete all as specified and directed. |
| 36 | M&L for vitrified ceramic tiles (light shade) 8 to 9mm thick (Square/ rectangular) area of each tile not exceeding 0.72 sqm as in skirting laid on 10mm thick cement plaster in CM (1:4) , set and jointed in neat cement slurry at the rate of 3 kg per sqm and pointed in white/coloured cement to match the shade of tiles including dismantlling of existing wall tilescomplete all as specified and as directed. |
| 37 | M&L for machine cut kota stone slab flooring 21-22mm thick over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including 15mm thich screed bed or bedding layer in cement mortar (1:6), rubbing and polishing including demolition of existing unserviceable kota stone flooring etc. complete all as specified and as directed. |
| 38 | M&L for machine cut kota stone 21-22mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including 15mm thich cement screed or bedding layer in cement mortar (1:4), rubbing and polishing including demolition of existing unserviceable kota stone flooring/skirting etc. complete all as specified and as directed. |
| 39 | M&L Granite slab 17 to 18 mm thick as in pillars, window cill, cooking platform and the like in cement motar 1:4 including pointing in white cment 1:2 using marble dust with a mixture of pigment to match the shade of granite including cutting polishing and moulding on edges and demolition of existing unserviceable Granite slab etc complete all as specified and as directed. |
| 40 | S&F in repairs stainless steel sinks without drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed. |
| 41 | S&F in repairs stainless steel sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets of steel having minimum section 45mmx 45mm x 5mm section and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed. |
| 42 | S&F in repairs stainless steel sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets of steel having minimum section 45mmx 45mm x 5mm section and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed. |
| 43 | S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and as directed. |
| 44 | S&F 4 mm thick plain sheet / frosted glass ordinary quality n.exc 0.50 sqm each pane and fixed with oil putty or with wooden beading in square including hacking out old brockn glass / new fixing provision (any thickness, any size or at any height) complete all as specified and as directed. |
| 45 | M&L for old size brick work with flyash/sub class bricks straight or curved on plan exc. 6mtr mean radius built in cement mortor 1:6, including demolition of existing brick work complete all as specified and directed by engineer-in-charge. |
| 46 | M&L for 15mm thick rendering with ready mix plaster (in patches) on fair and other than fair faces of brick or concrete surfaces finished even and smooth without using extra cement, levelling the surface, curing etc including taking down existing wall plaster complete all as specified and as directed.Note :- Rate is included for necessary scaffolding up to G+3 Storey Bldgs etc required for plastering. |
| 47 | S&F three layered heavy duty blow moulded Rotational moulded polyethene water storage tank 500 litres capacity (cylindrical vertical with closed top) white colour hoisted and fixed in position including 25mm bore PTMT ball valve high pressure with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210gms./ 25mm-455gms / 40mm, screwd for iron pipe or brass ferrule including 20/25 mm size Gun metal, globe or gate valvees, with iron wheel head, screwed both ends for iron pipe and fixed complete including dismantling of existing water tanks of any type/pattern not exc 500 ltr and removing from site of work complete all as specified and as directed. |
| 48 | Disconnecting existing tanks exc 250 Ltrs but n.exc 500 Ltrs capacity, setting aside (or lowering if required) and and re-fixing in same position after cleaning the tank complete all as specified and as directed. |
| 49 | S&F in repair stainless steel 25 mm dia 01 mm thick of approved quality curtain rod with two numbers stainless stell brackets/hook (either wall to wall or else) as per approved quality and diesign (for each 01 mtr of rod) fixed in brick/concrete wall and same finished knobs on each end of each piece of curtain rod complete all as specified and directed by engineer-in-charge. |
| 50 | S&F in repair for mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/ or riveted, welded or forged into spikes, framed guard bars, window frames, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work fixed in position including holdfasts or screws or welding confirming to Fe.290.Gde-E-165.Note :- Contractor shall be bounded to carryout repair / maint upto G+3 storey building and the rate shall be deemed including scafolding / double scafolding, safety equipments and misc accessories. |
| 51 | Taking down shutters with chowkhats any description exc 1.00 sqm but not exc 2.00 Sqm each and refixing the chowkhaks with shutter in same opening after easing and adjusting/repairing etc requiring carpentry work and carrying out minor repairs such as tightening of screws/nails, minor ajustment of joinery, door etc. including petty repairs material like screws/nails, plug, aluminium sliding window locking arrangement etc. to make it functional complete all as specified and directed by Engineer-In-Charge. Note : Any items required to be replaced shall be paid under respective items. |
| 52 | S&F fabricated aluminum window/ventilator with frames (Powder Coated) including jointing cleats for fixing builder's hardware & provision for glasspanes/wire mesh including necessary fittings/fixture /aluminum snap beads etc, complete all as specified and as directed by Engr-in-Charge.Note:- (a) Glazing/Wire mesh shall be measured under respective item seperatly (b) Items shall be paid as per weight of of aluminium sections (c) The rates quoted shall be inclusive of neoprene beading glazing clips, screws, etc as required whichshall not be measured for arriving the weight (d) The rate shall be inclusive of locking arrangement including fixing of aluminium hinges, handles & tower bolt in each shutter complete all as specified and as directed. |
| 53 | S&F (Powder Coated) aluminium decorative grill made out of aluminium alloy conforming to IS:733 and IS:1285, fabricated to required shape and size, anodised to required shade, fixed to window / ventilator / door frames including necessary fixing arrangements, screws, cleats and making good disturbed surfaces complete all as specified and directed by Engr-in-Charge |
| 54 | S&F Factory Made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers( wood powder/ rice husk/ wheat husk) and nontoxic additives ( max toxicityindex of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr in charge. Note: -For WPC solid door/windows frames, minus 5mm tolerance in dimension i.e., depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made. |
| 55 | S&F in repairs factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge.(Note: stainless steel butt hinges shall be paid separately under relevant item). |
| 56 | S&F in repairs Factory Made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkat of size 65 x 125 mm comprising of virgin PVC polymer of K value 50-60 (Suspension Grade), calcium carbonate and natural fibers( wood powder/ rice husk/ wheat husk) and non toxic additives ( max toxicityindex of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr in charge.Note: For WPC solid door/windows frames,minus 5mm tolerance in dimension i.e depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made. |
| 57 | S&F in repairs factory made single extruded WPC (Wood Polymer Composite) solid door/window/ceosetory windows & other frames/chowkhat of size 65 x100 mm comprising of vigin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ricehusk/wheat husk) and non toxicadditives (maximum toxicity index of 12 for 100 g,s) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.(MS hold fast/hugs or SS dash fasteners shall be paid for separately) Note:- For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 58 | S&F in repairs Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)complete all as specified and directed. |
| 59 | S&F in repairs 30mm thick FACTORY-MADE WIRE MESH SOLID WPC DOOR SHUTTER consisting of Density 650 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company, Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (Confirming as per IS:4020). The door should be water proof, termite proof,fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. SS butt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through Other hardwares shouldbe fixed with 19*6mm size steel screws etc. Complete as per direction of Engineer-in-charge, manufacturer's specification & drawings.” Note: Fixture/fittings shall be measured & paid under relevant item. |
| 60 | Taking down chwokhat with shutter upto 1.5 sqmt each (without taking of shutter from the frame) complete all as specified. |
| 61 | Taking down chwokhat with shutter exc 1.5 sqmt but not exc 4 sqmt each (without taking of shutter from the frame) complete all as specified. |
| 62 | S&F factory made solid PVC chowkhat/ door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet and edges will be painted to match with printed PVC sheet reinforced with 19mm x 19mm MS square tube of 19 gauge including rubber gasket, PVC fastners, screws, brackets, and shown complete all as specified and directed by engineer-in-charge. |
| 63 | S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick wood grain printed moulded prelam PVC sheet on the front face & 2mm thick plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as specified and directed by engineer-in-charge. |
| 64 | M&L for pressed steel frames for doors made out of 1.25mm thick MS sheet with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate 12mm bar thresh hold etc. complete , of frame size 125 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified. |
| 65 | S&F for pressed steel frames for doors made out of 1.25mm thick MS sheet with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate 12mm bar thresh hold etc. complete , of frame size 105 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified. |
| 66 | S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, with decorative face veneer on both faces with lipping/ frame to match including wooden bedding work complete all as specified and as directed. |
| 67 | S&F 35 mm thick factory made IInd class hard wood glazed and Skelton shutters (three panels) open rebated and prepared to receive glass/ gauge etc. divided into squares edges of framing plain, chamfered or rounded mitered and rebated sash bar any number with cut or mitered beads for securing glass/ gauge etc. size of members of shutters, complete all as specified and directed by engineer-in-charge. |
| 68 | S&F in repair stainless steel wire cloth, 0.63mm nominal dia or wire and sqm average width or aperature 1.40mm, fixed with tinned tacks or galvanised wire staples to doors/ steel windows complete all as specified and as directed. |
| 69 | S&F stainless steel butt hinges, size 100 mm complete, complete all as specified and directed by engineer-in-charge. |
| 70 | S&F stainless steel barrel tower bolts, 200 mm long, complete all as specified and directed by engineer-in-charge. |
| 71 | S&F stainless steel handles, 150 mm long, complete all as specified and directed by engineer-in-charge. |
| 72 | S&F stainless steel sliding door bolts 250mm long with hasp, staple (bolt type) fixing clips of sheet cast, fixing bolts, complete all as specified and directed by engineer-in-charge. |
| 73 | M&L for preparation of new steel surfaces of any description not otherwise described over 10 cms width or girth and apply two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer all as specified. Please Enable Macros to View BoQ information |
| 74 | M&L for preparation of new steel surfaces of any description not otherwise described over 10 cms width or girth and apply two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysJul 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender