Tender For Repair To High Security Fencing, Stone Masonary Wall, Cattle Fencing, Paths Security Fencing And Misc Items In A A Banar Under Ge Banar
Tender Value
45 Lakhs
Estimated cost
Bid Submission
13 Jul 2026
4 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jodhpur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To High Security Fencing, Stone Masonary Wall, Cattle Fencing, Paths Security Fencing And Misc Items In A A Banar Under Ge Banar
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion in concrete and making good distrubed ground complete all as specified. |
| 2 | Dismantling of damaged Barbed wire of any description and in any position removal from site of work complete all as specified. |
| 3 | S & F In Repair Barbed wire, Galvanized steel, 2 strand 2.24 mm dia barbs at 75 mm spacing straining and type of standard rails, straining bolt, including securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins etc ( each line wire to be measured) complete all as specified. |
| 4 | Excavating in post holes (or similar holes) each n.exc 0.50 Cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard/dense soil complete all as specified. |
| 5 | M&L for PCC (1:4:8) type-D2 by using 40 mm graded stone agg as in foudation, filling and mass concrete complete all as specified. |
| 6 | M&L cement concrete type C-2 1:3:6 (40mm graded aggregate) as in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) including shuttering complete all as specified. |
| 7 | M&L for rolled mild steel section as in posts, struts and staples in fencing including cutting to top to shape (swan neck) as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc) including all necessary bolting or riveting welding etc and similar work confirming to Fe-290 Gde-165 complete all as specified. Note :- Fencing posts should be painted before fixing. |
| 8 | S&F mild steel framed work as in doors or gates of angles or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and incl either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete incl pintel hinges, stops hand made sliding bolts etc conforming to Fe 410-W (Gde-E-250) quality-A, including taking down old steel gates complete all as specified. |
| 9 | M & L for two coats of synthetic enamalled paint over one coat of red oxide primer on new steel surfaces exc 100mm width or girth, including preparation of the surface complete all as specified. |
| 10 | M&L for preparation of new or previously untreated steel surfaces of any description, not exceeding 10 cm in width or girth and applying two coats of synthatic enamel paint over a coat of zinc chrome primer complete all as specified. |
| 11 | Dismantling of fencing wire mesh any type and any size complete all as specified. |
| 12 | Supply only Chain link of 100mm mesh size and dia of wire 4mm MS galvanised fencing, any size or type complete all as specified and directed. |
| 13 | Fixing only chain link fencing including line wires/ MS round bar (Any numbers), any mesh, size and type to any type of standards rails, straining bolts, etc including provision of binding wire complete all as specified.Note :- Supply of flat iron, MS round bar & chain link shall be measured and paid seperately under supply only. |
| 14 | S & F 12 mm dia MS screw bolts any size (machine made) with hexagonal or square heads at one end and screwed the other ends, fitted with washer and one one hexagonal nut exc 5cm long but n exc 10 cm cmplete all as specified. |
| 15 | Supply only MS rounded bars Fe-290 (Gde-165) 10 mm dia and over cut to length and bend to shape as required as in tie bars, secured with nut, bolt and washers complete all as specified. |
| 16 | Demolition of Brickwork, PCC or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified. |
| 17 | M&L for squared rubble walling Jodhpur type regular course well bonded bedded and solidly hearted built in cement mortar 1:6 complete all as specified. |
| 18 | As as per Ser Item No 16 above but except stone complete all as specified. |
| 19 | Extra over on stone walling for hammer dressing to face stone with maximum depression on face from straight edge n.exc 20 mm and dressing faces beds and joints as specified to square rubble walling regular course Jodhpur type all complete all as specified. |
| 20 | M&L for PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in copping including necessary form work, weathering slightly rounded or chamferred angles and thoating complete all as specified. |
| 21 | Raking out joints/pointing to squarred rubble masonry, coursed or uncoursed built in cement mortar complete all as specified. |
| 22 | M&L for keyed pointing to stone masonry surface in CM 1:4complete all as specified. |
| 23 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified. |
| 24 | Material and labour for 15mm thick rendering in CM 1:4 mixed with WPC on stone masonry surfaces finished even and smooth without using extra cement complete all as specified. |
| 25 | Supply only integral water proofing compound complete all as specified. |
| 26 | Material and labour for preparation of newly plastered surface of walls and applying two coats of cement base paint over one coat of alkali resistance primer complete all as specified. |
| 27 | M&L for one coat of cement base paint on old plastered /pointed surfaces of walls including necessary preparation of surfaces complete all as specified. |
| 28 | Demolition of cement concrete (unreinforced) in ground floors and pavings exc 15 cm thickness (below or above ground level) and removing from site complete all as specified. |
| 29 | M&L for 75mm thick PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified. |
| 30 | M&L for Sand filling under floors or in foundation including watering and consolidation complete all as specified. |
| 31 | M&L Machine pressed precast concrete interlocking paver block any shape and size 60mm confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigment complete all as specified. |
| 32 | M&L for 25mm thick PCC 1:2:4, Type B-0 using 12.50mm graded aggregates as in base concrete to floor finish complete all as specified. |
| 33 | M&L for Chequered cement concrete tiles 20cmx20cmx25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment in floors over and including 20mm thick screed bed in CM 1:4 complete all as specified. |
| 34 | M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified. |
| 35 | Demolition of reinforced cement concrete of any description and in any position not otherwise specially provided for complete all as specified. |
| 36 | M&L for providing precast cement concrete (1:2:4) type B-0 using 12.50mm graded stone aggregate for Jallies 35mm thick (measured solid) including all moulding and set in CM 1:4 complete all as specified. |
| 37 | M&L two coats of cement base paint on concrete surfaces/ RCC jallies over priming with alkali resistant priming including preparation of new concrete surfaces complete all as specified. |
| 38 | Dismantling of Wall & ceiling boards (fiber, pulp, insulation, etc)/ wall panelling including frame work or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified. |
| 39 | Providing & fixing UV stabilised fiberglass reinforced plastic sheet of 2mm thick roofing up to any pitch, including fixing with polymer coated ‘J’ or ‘L’ hooks, bolts & nuts 8 mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysJul 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender