Tender For Repair/ Maintenance Of Internal Electrification And Repair/ Maintenance Of Water Supply Distribution Lines, Pump, Fountain & Cleaning Of Sump/ Tank Alongwith Its Connected Works At Sangli Apartments Under Ge New Delhi
Tender Value
Ref. Documents
Estimated cost
Bid Submission
13 Jul 2026
4 days left
EMD
99998
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Maintenance Of Internal Electrification And Repair/ Maintenance Of Water Supply Distribution Lines, Pump, Fountain & Cleaning Of Sump/ Tank Alongwith Its Connected Works At Sangli Apartments Under Ge New Delhi
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : GE NEW DELHI Name of Work: REPAIR/ MAINT OF INTERNAL ELECTRIFICATION AND REPAIR/ MAINT OF WATER SUPPLY DISTRIBUTION LINES, PUMP, FOUNTAIN & CLEANING OF SUMP/ TANK ALONGWITH ITS CONNECTED WORKS AT SANGLI APARTMENTS UNDER GE NEW DELHI Contract No: GE/ND-36/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Rates only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sch. itemNo. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Taking down carefully old point wiring (Light / Fan/ Socket/ Bell Point) with aluminium/ copper conductor cable complete including fittings such as ceiling rose, holders, regulators, bell, switch and socket from existing concealed conduits/ casing caping and making good the disturbed surface of wall/ floor complete to match with the existing surface/ finishes complete all as specified and directed by Engg in charge. |
| 3 | M&L for Point wiring for one light/ ceiling fan/ exhaust fan point controlled by one, one way 6 Amp switch with 1.5 sqmm PVC insulated and unsheathed copper conductor multistranded 1100 volts grade, ISI marking drawn thorugh and new non metallic PVC rigid concealed conduit and conduit accessories, medium grade, ISI marking, concealed Frame for fixing switches, sockets, inculding one run of 1.5 sqmm PVC insulated unsheathed copper cable FRLS grade as in earth wire for continuity and connecting to earth dolly for one light point controlled by one switch complete including making good the disturbed surface by Putty and matching the colour of wall with the existing colour of the wall (wash/ paint/ distemper) wherever required (as per the existing condition) complete all as specified and directed.Note: The cost of modular metal flush box and Modular white Cover Plate with Frame, MS terminal boxes and blank plate if required shall be deemed to be included in the unit rate.Make: RR kabel/ Polycab/ Havells/ Gloster/ Finolex |
| 4 | All as per item No 02.00 above but for one bell point controlled by one, one way 5 Amp switch complete all as specified and directed. |
| 5 | All as per Item No 02.00 above but for One 3 pin 5 Amp socket outlet on the same board complete all as specified and directed. |
| 6 | All as per Item No 02.00 above but for One 3 pin 5 Amps socket outlet on independent board complete all as specified and directed. |
| 7 | All as per item No 2.00 above but point wiring with 2.5 Sqmm single core copper cable and earth continuity wire with 2.5 Sqmm single core cable for one three pin 15 socket outlet point on independent board complete all as specified and directed by Engineer-in-Charge.Make: RR kabel/ Polycab/ Havells/ Gloster/ Finolex |
| 8 | All as per item No 2.00 above but with 4.0 sqmm single core copper (for Phase, Neutral) and sqmm (for continuous earth wire) cable for one three pin AC/Geyser Outlet point on independent board complete all as specified and directed. Make : RR Kabel, Polycab, Finolex, Gloster, Havells |
| 9 | S&F in replacement of modular type switch single Pole 6 Amp 250V AC with ISI mark including 6 Amps Switch frame complete all as specified and directed. Make : Anchor, IndoAsian, Legrand, Panasonic, Goldmedal, Havells, Schneider, Siemens |
| 10 | S&F in replacement of modular switch 16 A SP one way 240 volts complete all as specified and directed. Make : Anchor/Indoasian/Legrand/Panasonic/Goldmedal/Havells/ Schneider, Siemens |
| 11 | S&F in replacement modular socket 6 A Multi socket for 2 pin and 3 pin 240 volts complete all as specified and directed. Make : Anchor/Indoasian/Legrand/Panasonic/Goldmedal/ Havells/ Schneider, Siemens |
| 12 | S&F in replacement of modular socket outlet 16 A-2/3 pin combined 240 volts complete all as specified and directed.Make : Anchor/Indoasian/Legrand/Panasonic/Goldmedal/Havells /Schneider/ Siemens |
| 13 | S&F in replacement modular bell push 6A with Neon 1 module 240 volts complete all as specified and directed. Make : Anchor/Indoasian/Legrand/Panasonic/Goldmedal/Havells |
| 14 | S&F in replacement of electric bell Ding-Dong AC 230 Volt complete all as specified and directed by Engr-in-Charge. Make : Anchor/Indoasian/Legrand/Panasonic/Goldmedal/ Havells/ Cona/ Schneider/ Siemens |
| 15 | S&F in replacement of wall mounted decorative bedlight LED light of 2/3W goosenek arm easy to adjust premium material white metal 75lm/3000K and finish energy saving with LED light source fixture, complete all as specified and directed by Engg in charge. Make: Philips CAT Part No.30975, Legrand, CAT Part No.Lyncus Reading light 677316, IKEA Nymne CAT Part No.GU573671. |
| 16 | S&F in replacement LED lights fitting 1x 20W (Size 4 Feet) 220V, AC Warm/Natural White decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Make : Philips, Bajaj, Crompton, Orient, Havells, Polycab, Halonix |
| 17 | S&F in replacement LED light fitting with high output diffuser 10W (Size 2 Feet) 220V, AC Warm/Natural White decorative box type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make : Philips, Bajaj, Crompton, Orient, Havells, Polycab, Halonix |
| 18 | S&F in replacement aesthetically designed wall mounted decorative wall LED light of 15W fixture with opal diffuser to give glare free light including suitable LED lamp of 15W, complete all as specified and directed.Make: Philips Cat Part No. Muziris 31434, Lustre Cat Part No. LI 3618/IW, Wipro Cat Part No. BW06 |
| 19 | S&F in replacement Mirror light/Photo frame upto 10 Watt LED type WW /NW/CDL made of copper plated metalic body and suitable to mount on wall complete all as specified and directed.Make: Philips cat part No 581999 or equivalent in Bajaj, Crompton, Orient, Havells, Polycab, Halonix |
| 20 | S&F in replacement LED light fitting upto 15 Watt bulkhead luminaires circular shaped including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-charge. Make : Philips, Bajaj, Crompton, Orient, Havells, Polycab, Halonix |
| 21 | S&F in replacement warm/natural white LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. Make : Philips, Bajaj, Crompton, Orient, Havells, Polycab, Halonix |
| 22 | S&F in replacement inverter type 9 watt pin type LED Bulb warm /natural white suitable for existing size complete all as specified and directed. Make : Philips, Bajaj, Crompton, Orient, Havells, Polycab, Halonix |
| 23 | S&F in replacement of old unsv post top lights with ring shaped LED Post top light of 30-36 watt fixture made up of cast, spun & extruded aluminium. LED Having LED CCT of 3000 K, translucent polycarbonate diffuser shall be fitted in the LED post top light, the post top light having external surge protection of 10 kV with driver standard voltage withstand range of 100-300 Volt AC having efficiency> 85%. Power factor shall be >0.95, and inbuilt surgeprotection of 4kV. LED used to be from Lumileds/Nichia/Osram & the luminous efficiency of LED shall be minimum IK08.The system life should be 50000 burning hours. The ingress protection of optical area of post top light shall be IP-65 level. The decorative post top light shall be machined and polished properly to give it a smooth surface. LED post top light shall be dully pretreated by sanding process and shall be painted/powder coated in polyurethane/polyester coating as per the colour shade required by Engr-In-Charge complete all as specified and directed. Make: Philips Cat Part No. BWG150 LED50/WW PSU 220-240V IP67 7043 or Equivalent in Havells/Crompton/Lustre/ Halonix |
| 24 | M&L for supply, erection, testing & commissioning of 3.0 metre height decorative GI tubular pole in replacement of old damaged poles, suitable for post top mounting,size of base plate is 250 X 10 mm with foundation bolt size 3/4\\" BSW, Lower part of pole with length 1000mm having bottom dia 114 mm with min 3.2 mm thickness including window/door opening with one MCB SP 6 Amps & TPN connector block 32 Amps having flash cover lower part of pole shoulf be equiped with Jade type decorative elements made of aluminium . middle part of pole must be of height 1.925 mtrs having dia 76 mm with min thickness 3.2 mm and top part of pole must be of height 0.75mtr having dia 48 mm with min thickness 3.2 mm, upper part of pole must have decorative ring elements at the center. pole should be of PU paint in black or as per approval of Engineer-In-Charge including taking down old unsv pole any type complete all as specified and directed. Note:- (a) The quoted rate also include cost of necessary earth work (excavation, returning filling & removal) in soft/loose soil, RCC (grade M20) in foundation as per recommended design of manufacturer considering safe soil bearing capacity at site including suitable size & minimum 03 Nos foundation bolts of minimum dia 3/4\\"& length as per manufacturer recommendation , \\"J\\"-type alongwith nuts, washers, anchor plates and templates, 50 mm dia PVC pipe in foundation for entering cable complete all as specified. (b) The foundation details as per manufacturer recommendation.Make : Philips/Bajaj/Lustre. |
| 25 | S&F in replacement Rigid non-metallic PVC conduit 20 mm dia including of boxes (junction/ terminal), all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc for lan/ telephone circuits complete all as specified and directed.Note : Work includes cutting of chases on wall and making good disturbed surfaces. |
| 26 | S&F in replacement non metallic rigid PVC casing caping upto 5 cm wide, ISI Mark complete all as specified and directed. Make : Kalinga Premium/ Supreme |
| 27 | S&F in replacement PVC gang box with Cover plate 2/3 module suitable for fitting one 5 Amp switch and one 5 Amp socket complete all as specified and directed by Engg in charge. Note : No of Switches and Socket required are included in the quoted rate. |
| 28 | S&F in replacement PVC gang box with cover 04 module suitable for fitting one 15 Amp switch and one socket complete all as specified and directed. Note : No of Switches and Socket required are included in the quoted rate. |
| 29 | S&F in replacement PVC gang box with cover 6 module suitable for fitting switch and socket of 5 Amp complete all as specified and directed. Note : No of Switches and Socket required are included in the quoted rate. |
| 30 | S&F in replacement electronic fan regulator modular type 120Watt dimmer / step type any Module as per existing complete all as specified and directed. Make : Anchor/Indoasian/Legrand/Panasonic/Goldmedal/Havells |
| 31 | S&F in replacement fan capacitor of capacity 2.5 mfd complete all as specified and directed.Make : Epcos/ Anchor |
| 32 | S&F in replacement ceiling fans complete with blades, down rods, accessories, 230 V, 1200 mm sweep. Min air delivery 230 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) ceiling fan with remote of color white or (As per site requirment) complete with all accessories internally pre wired and including connecting up with three core flexible copper conductor cable with suitable size and making arrangement to hanging of fan to ceiling with proper hook nut bolt acomplete all as specified and directed. Make : Havells, Crompton, Orient, Atomberg, Usha, Bajaj, Polycab, Halonix |
| 33 | S&F in replacement Metalic Exhaust Fans AC single phase 230/240V of size 300 mm sweep (as per sample ) complete all as specified and directed. Make: Havells, Crompton,Orient, Usha, Bajaj, Polycab, Halonix |
| 34 | S&F in replacement PVC body ventilation fans AC single phase 230/240 V of size 250 mm sweep (as per sample ) complete all as specified and directed. Make : Havells, Crompton, Orient, Usha, Bajaj, Polycab, Halonix |
| 35 | S&F in replacement Louver shutter made of MS for exhaust fan of size upto 300 mm ccomplete all as specified and directed. |
| 36 | S&F in replacement motor for ventillation fan of size upto 250 mm ,copper wounded complete all as specified and directed. |
| 37 | Taking down carefully Geysers 25/50 Ltr capacity, opening for inspection, , cleaning, descaling, reassembling and refixing in position after carrying out repairs like soldering/ brazing etc including replacement of pressed rubber gasket, Nuts, bolts, neon indicator lamp 1 Amp etc complete all as specified and directed by Engg in charge. |
| 38 | M&L for spray painting (white colour) with synthetic enamel paint to Geysers 25/50 Liters capacity to reach upto satisfied finish of painting after cleaning and preparation of surface and marking MES No with black paint complete all as specified and directed by Engineer-in-charge. |
| 39 | S&F in replacement heating element of 2.0 KW (Rectangle/triangle /circular ) as required at site including rubber washers (ISI marked) etc complete all as specified and directed.Make : Venus or As per sample. |
| 40 | S&F in replacement storage tank made out of steel sheet of appropriate thickness and confirming to IS 208 (1974) for 50 litre capacity geysers with collar complete duly tested at required pressure as per IT I of 1986 of steel storage tank complete all as specified and directed. |
| 41 | S&F in replacement storage tank made out of steel sheet of appropriate thickness and confirming to IS 208 (1974) for 25 litre capacity geysers with collar complete duly tested at required pressure as per IT I of 1986 of steel storage tank complete all as specified and directed. |
| 42 | S&F in replacement base plate assembly 20 SWG heavy duty suitable for 25/50 litre capacity copper tank geyser with inlet, outlet and thermostat pipe with drain plug and screw for fixing the element including clamps for holding the element with nuts, bolts and safety valves suitable for all type of geysers installed at site (As per sample) complete all as specified and directed. |
| 43 | S&F in replacement chromium plated copper connection pipe 600mm long with two brass adopters washers and connecting up complete all as specified and directed. |
| 44 | S&F in replacement thermostat for 25/50 Litres for any type geyser complete all as specified and directed. (As per sample) |
| 45 | S&F in replacement mild steel hole fastner 10mm dia, 100mm long including nut and washer complete all as specified and directed. |
| 46 | S&F in replacement PVC wire 1.5 Sqmm of FRLSH PVC insulated copper conductor, single core cable drawn through existing PVC conduit of 20 mm dia bore with all fittings accessories complete all as specified and directed. Make : RR Kabel/Havells/ Polycab/ Gloster /Finolex |
| 47 | S&F in replacement PVC wire 2.5 Sqmm of FRLSH PVC insulated copper conductor, single core cable drawn through existing PVC conduit of 20 mm dia bore with all fittings accessories complete all as specified and directed.Make : RR Kabel/Havells/Polycab/ Gloster /Finolex |
| 48 | S&F in replacement Electric Water Heater of Capacity 25 Litres, BEE 5 Star rated heating element upto 2 KW with glass line inner tank with whirlflow technology, Mg anode rod, IPX4 high strength polymer body complete with all accessories such as safety valve, thermostat, NRV, connection piece etc complete all as specified and directed.Make : Crompton/ Bajaj/ Orient |
| 49 | S&F in replacement submain wiring alongwith earth wire with 2 run of 10 Sqmm (Main Cable and neutral) and one run of 10 Sqmm as earth wire of FRLSH PVC insulated copper conductor, single core cable drawn through existing PVC conduit of 25 mm bore with all fittings accessories complete all as specified and directed.Make : RR Kabel/Havells/Polycab/Gloster /Finolex |
| 50 | S&F in replacements Wall Mounted indoor type factory made load line DB s double door made out of CRCA mild steel sheet with insulating material like polyester powder coated surface mounted 4 way VTPN 415 volts IP 43 protection with suitable bus bar neutral link and earth link suitable for 4 pole MCCB of 125 A as incoming and SP/TP MCB of rating 5 to 100 Amps as outgoing complete all as specified and directed.Make: Legrand/ C&S Electric/ Indoasian/ L&T (LK)/ Havells/ Scheneider/ Siemens |
| 51 | S&F in replacement sheet metal enclosures for DB's when MCB to be used, SPN double door 240 volt, 12 way with 200 Amps rated bus bar complete all as specified and directed. Make: Legrand/ C&S Electric/ Indoasian/ L&T (LK)/ Havells/ Scheneider/ Siemens |
| 52 | S&F in replacement of MCB SPN/DP 32 to 40 Amp 240 volt 10 KA complete all as specified and directed. Make: Legrand/ C&S Electric/ Indoasian/ L&T (LK)/ Havells/ Scheneider/ Siemens |
| 53 | S&F in replacement of MCB SPN 6-32 Amp 240 volt 10 KA complete all as specified and directed. Make: Legrand/ C&S Electric/ Indoasian/ L&T (LK)/ Havells/ Scheneider/ Siemens |
| 54 | S&F in replacement MCB SP 6 Amp to 32 Amp 10 KA.240 volts complete all as specified and directed.Make: Legrand/ C&S Electric/ Indoasian/ L&T (LK)/ Havells/ Scheneider/ Siemens |
| 55 | S&F in replacement Non metallic rigid PVC conduit medium grade upto 50 mm dia, ISI Mark complete all as specified and directed. Make : Kalinga premium/ Supreme/Finolex |
| 56 | S&F in replacement sheet Metal enclosure with plug and socket 20 Amp 240 volts with one MCB single pole complete all as specified and directed.Make: Legrand/ C&S Electric/ Indoasian/ L&T (LK)/ Havells/ Scheneider/ Siemens |
| 57 | S&F in replacement modular AC /Geyser plug - socket PVC body with modular mini MCB of 16 Amps complete all as specified and directed.Make: Legrand/ C&S Electric/ Indoasian/ L&T (LK)/ Havells/ Scheneider/ Siemens |
| 58 | M&L for cleaning of LT Panel room of each block every three months by taking shut down from NDMC including replacement of thimbles, Teflon tape, Chhecking loose conection of Cables/Wire and isolators, clamping of scattered wires and cables if any and laying them to maintain the electrical hygine complete all as specified and directed. Note : Contractor need to inform RWA Secretary and Engr-in-Charge one day prior to start the work. Any minor spare like wire upto 5 mtr any size, thimbles, cleaning agent liquid and tape etc are included in the quoted rate. |
| 59 | M&L for painting of LT /Meter panel with synthetic enamel paint two coats after one coat of primer (colour decided by engr in charge ) to reach upto satisfied finish of painting after cleaning and preparation of surface and marking qtr No with black paint complete all as specified and directed by Engineer-in-charge. Note : Contractor need to inform RWA -Secretary and Engr in charge one day prior to start the work |
| 60 | M&L for welding of rusted part(outer body) using MS sheet of thickness upto 5mm of the LT/meter panel including welding of broken bus bar inside the panel, maintaining the surface (primer and painting ) as per the existing complete all as specified and directed. |
| 61 | S&F in replacement Indicator of three phase (RGB) set of three with complete all as specified and directed. |
| 62 | Comprehensive maintenance of existing electric kitchen chimney filter/filterless type. The maintanance will include complete cleaning of the chimney as well as the duct with suitable solution, repair of the suction motor or replacement of the same if required with the motor of suction capacity greater than or equal to the existing motor. The cost will also include replacement of any other parts viz- filter, sensors, LED lights and control wiring, blower replacement etc by skilled technician, i.e. anything required to make the chimney fully functional as per user requirements and as directed by the Engineer-in-Charge. |
| 63 | S&F in replacement of flexible Aluminium duct pipe of size 6\\" for chimney of suction capacity not less than 1350 cm/hr . Complete installation kit with free cowl cover, 2m tape, clamp complete all as specified and directed. |
| 64 | M&L in replacement for plate earthing complete with galvanized mild steel plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (in earth pit not less than 2.25 meter deep below ground level) with the top edge of earth plate at a depth not less than 1.5 meter below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and including GI strip 25X4 mm bolted (with GI nuts, bolts & check nuts) and riveted to earth (Plate) electrode at one end and connected to main switch board test point at the other and watering GI pipe (medium grade) 20 mm bore from bottom of earth pit to top of electrode and 40 mm GI pipe light grade for earth strip protection complete with earth pit in PCC 1:2:4 type B0 using 12 mm graded crushed stone aggregate, RCC cover etc complete all as specified and directed. |
| 65 | S&F in replacement Instant Hot water Geyser of 5 Litres Capacity, Vertical type with suitable size of fastner incl provision and connecting of SS braided pipe with adapter for inlet and outlet water connections, copper element should be corrosion resistant, antiscaling magnesium anode, and inner tank material of superior glass lined tank having heating element of minimum 2.5 kW complete all as specified and directed. It should have minimum two years warranty on products & minimum three years warranty on heating element complete all as specified and directed by Engg in charge.Make: Bajaj - Shield Series Vere Plus-1 WH, Crompton - Rapid Jet- 5L 40 Smith-EWS-5L or Equivalent in Havells/ Orient |
| 66 | S&F in replacement of wall mounted electric Chimney of minimum width 60 cms, having suction power not less than 1350 Cum/Hr, with stainless steel outer layer, with 03 speed motor with decorative smart cooker hood SS/Glass, energy efficient LED light with digital display including ducting, having auto clean function, noise level not more than 60 dB, Control Panel- Touch & Motion sensor control, including ducting as per site requirement complete all as specified and directed by Engr-in-Charge. Make: Cooker Hood Celesia 60 BLK Hindware 1500 Suction, Cooker Hood Magnus 60 Faber, KLWB TBF 60 MS NERO Elica or equiavelnt. Note : The rate quoted by the contractor will include ducting length required from the Chimney to the exhaust hole. |
| 67 | S&F in replacement Earth continuity conducto of size 25x4 mm GI strip fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc complete all as specified and directed. |
| 68 | Material & Labour for attending day to day external water supply complaints of all nature i.e. leakage in water supply pipe lines, fittings/fixtures, over flow of overhead tank, no water supply, including recording the complaints in complaint register complete all as specified and directed by Engineer - in - Charge. Note: (Any material i.e. union, socket, elbow, nipple required for attending complaints shall be measured & paid separately as supply only under respectvie item here in after)Note: Quoted rates shall deemed to be included the elements as mentioned below:-(a) The complaints shall be attended and the defetcs shall be rectified by skilled Plumber as applicable assisted with adequate No of helpers as directed by Engineer-in-charge(b) The complaints shall be attended & defect shall be rectified within 08 hrs commencing from date and time of notifying the complaint failing which a penalty @ Rs 250/- per complaint per day (08 hrs) shall be levied upon/imposed on the contractor and recovery shall be made from contractor's dues.(c) While attending the complaint of water supply if earth work is required then the same shall be measured and paid seperately under appropriate item of Sch 'A'. However , no extra payments shall be made for dewatering(d) Cutting of GI pipe in position and threading is also deemed to be included in the job rate (Fittings and fixtures will be measured and paid separetely under respective items of Sch)(e) All T&P required for attending the Complaints shall be provided by the contractor. |
| 69 | M&L for cleaning of Under ground sump of storage capacity of 0.50 Lac Gallons thoroughly by dewatering (mechanized), cleaning inner surfaces of tank complete by manual scrapping, removing mud, sludge collected inside the tank manually to a distance not exceeding 50 Mtrs and washing with bleaching powder or with high strength calcium chloride mixture thoroughly internally, including writing capacity of sump, cleaning date & due date of cleaning with black synthetic enamel paint as per existing pattern (including removing of any vegetation growth on and around the tank) complete all as specified and directed by Engineer-in-Charge. |
| 70 | M&L for cleaning of RCC water tanks of capacity 25000 Litres on terrace by dewatering the complete tank, removing the sediments settled at the bottom of tank, scraping the walls and bottom of tank with wire brush and cleaning with bleaching powder solution, washing with clear water and applying one coat of white wash both internally and externally and writing the date of cleaning, due date of cleaning and capacity of tank in paint (including removing of any vegetation growth on and around the tank complete all as specified and directed by Engineer-in-Charge. |
| 71 | Material and labour including jointing and testing of cast iron sluice valves 80mm bore, class PN-1.0, conforming to IS:14846 flanged ends drilled having stainless steel spindle with cast iron wheel at top complete with nuts, bolts, washers and rubber gaskets including taking out unserviceable sluice valve and removal from site complete all as specified and directed. |
| 72 | All as per item No 70.00 above but for size 100 mm bore complete all as specified and directed. |
| 73 | Supply and fixing jointing and testing of cast iron Non return valve 80mm bore without by pass arrangment swing type confirming to IS 5312 flanged ends pressure rating PN 1.0 complete including taking out unserviceable NRV complete all as specified and directed by Engineer-in-Charge. Note - Flanged joints complete with rubber jointing materail shall deemed to be included in the unit rate of this item |
| 74 | All as per item No 72.00 above but for size 100 mm bore complete all as specified and directed. |
| 75 | S&F CI Foot valve of 80mm bore, Flanged ends, Swing type opration with rubber sheet as per IS-4038 complete all as specified and directed by Engineer-in-Charge. Note :- Flanged joints complete with jointing material shall deemed to be included in the unit rate of this items. |
| 76 | All as per item No 74.00 above but for size 100 mm bore complete all as specified and directed. |
| 77 | Supply and installation of flanged ends strainer/dirt box, PN-10 with stainless steel mesh suitable for water meter for potable water supplies on up stream of water meter to avoid foreign material entering into meter including taking out unserviceable of 100 mm dia complete all as specified and directed at site by the Engineer-in-Charge. |
| 78 | S&F in replacement mild steel work for manhole cover, stair case steps, pit chamber cover etc made of MS angle/ flats/channels etc including cutting out top and bottom to shape as directed & applying two coats of synthetic enamel paint over a coat of red oxide primer including preperation after demolition of existing covers,steps etc complete all as specified and directed. |
| 79 | M&L for painting two coat of synthetic enamel paint as per existing pattern on pipe surface/iron surface connection including preparation of surfaces by scratching and removing the rust, red primer coat complete all as specified and directed by Engg in charge. |
| 80 | Supplying , laying , jointing, welding and testing MS Pipe (Heavy class 'C') IS : 1239/3589, of 80mm dia, laid in trenches or in Horizontal/ Vertical/ inclined position or laying on floors for connections for suction, to header and connected to out going water main CI/DI pipe line, including taking out the old unserviceable pipes complete all as specified and directed.Note:- MS Flanges incl fabrication work will be measured and paid separately. |
| 81 | All as per item No 79.00 above but for size 100 mm dia complete all as specified and directed. |
| 82 | S&F in replacement of MS flange 80 mm bore ,16mm thick duly welded with flange joint including nuts bolts ,washer , Rubber or fiber board gasket joint of size 80mm size complete all as specified and directed. |
| 83 | S&F in replacement of MS flange 100 mm bore ,16mm thick duly welded with flange joint including nuts bolts ,washer ,Rubber or fiber board gasket joint of size 100mm size complete all as specified and directed. |
| 84 | M&L for removing weeds and wild grass inside the installations using chemical spray and trimming trees and unwanted plants using petrol operated Tree/Grass cutting tools and dressing of the surface by scrapping high patches and filling low patches with the scrapping soil to give an even and neat look to the site and cleaning of storm water drain passing through the installation disposing off all the unwanted grass, bushes and debris complete all as specified and directed by the Engineer-in-Charge. |
| 85 | M&L for fabrication (welding work) of MS Header/Pipe of any size upto 200 mm MS pipe at pump house for arresting leakages complete all as specified and directed. |
| 86 | Taking up old GI steel tubing 20mm bore, with connection including fittings complete all as specified and directed. |
| 87 | All as per item No 85.00 above but for size 25 mm bore complete all as specified and directed. |
| 88 | All as per item No 85.00 above but for size 50 mm bore complete all as specified and directed. |
| 89 | Supply & Laying of GI pipe 20mm bore, mediun grade ISI mark including all fittings in old/new positions in trenches/wall/floor complete and making good the distributed surfaces as per existing complete all as specified and directed.Note: Excavation and earth work if required shall be included in quoted rates of subject item |
| 90 | All as per item No 88.00 above but for size 25 mm bore complete all as specified and directed. |
| 91 | All as per item No 88.00 above but for size 50 mm bore complete all as specified and directed. |
| 92 | Supply only in replacement GI Union 25mm bore, Med Grade, ISI marked complete all as specified and directed. |
| 93 | All as per item No 91.00 above but for size 50 mm bore complete all as specified and directed. |
| 94 | Supply only in replacement GI Socket 25mm bore,Med grade ISI Marked complete all as specified and directed. |
| 95 | All as per item No 93.00 above but for size 50 mm bore complete all as specified and directed. |
| 96 | Supply only in replacement GI Elbow 25mm bore, Med grade ISI Marked complete all as specified and directed. |
| 97 | All as per item No 95.00 above but for size 50 mm bore complete all as specified and directed. |
| 98 | Supply only in replacement GI Nipple 25mm bore, Med grade of (4\\"/6\\" length) as per requirement both end screwed ISI Marked complete all as specified and directed. |
| 99 | All as per item No 97.00 above but for size 50 mm bore complete all as specified and directed. |
| 100 | S&F in replacement Gun metal gate valve 20mm bore, with iron wheel head screwed both ends for iron pipe as per IS-778 complete, ISI marked complete all as specified and directed. |
| 101 | All as per item No 99.00 above but for size 25 mm bore complete all as specified and directed. |
| 102 | All as per item No 99.00 above but for size 50 mm bore complete all as specified and directed. |
| 103 | Disconnecting electric connections from LT control panel and starter of submersible pump set of size 5 to 15 HP and removing the pipe line connections from discharge side and taking down/out submersible pump set along with column pipe from bore well with the help of chain pully block including transportation to workshop for repairs and back and lowering of same pump in bore well after repairs after replacement of rusted nuts, bolts, washers, rubber gasket etc including testing complete all as specified and directed by Engg-in-Charge. |
| 104 | Dismantling complete submersible pump of capacity 5-15 HP and repairing the same with replacing the unserviceable spare parts i.e GM bush, rotor sleeve, water seal,cable seal, thrust bearing, sealing ring, upper & lower housing flange upper & lower with stud and nut, wire mesh, drain plug, SS distance sleeve, impeller key, inter ring GM neck ring, Guide bush, GM impeller/EPV Impeller, CI suction chamber,SS coupling, CI stage bowl, T bolt with nut including grinding work of lathe machine and re-assembling the same testing, complete all as specified and directed |
| 105 | Disconnecting of electric connection and De-coupling the Centrifugal pump of capacity 30 HP and removing from foundation for repair after opening /cutting the rusted nuts, bolts etc and dismantling complete pump and repairing the same with replacing the following unserviceable spare parts i.e CI Casing wear ring, interstage ring, stuffing box bush, lentern ring, eye bolt with nut, shaft sleeve, impeller key, coupling key, water liquid reflector, bearing cartridge, bearing plate, shaft bush, MS stud with nut, gland rope or Mechanical seal as applicable on site, gasket packing, Tyre-Coupling, DE/NDE Bearings including grinding work of lathe machine and re-assembling the same including the transporting the pump from side to workshop for repair and back, re-installed at existing position after repair and providing new MS nuts, bolts,packing flange etc including testing complete all as specified and directed. |
| 106 | S&f in replacement pump shaft stainless steel suitable for centrifugal pump set up to 30 HP including turning, grinding and balancing work complete all as specified and directed. |
| 107 | S&F in replacement CI Impeller suitable for centrifugal pump set up to 30 HP including turning, grinding and balancing work complete all as specified and directed. |
| 108 | M&L for rewinding of motor of centrifugal and Submersible pumps with super enamelled copper wire of existing gauge including greasing, varnishing, insulating paper of appropriate class, drying varnishing etc including base repairs if required including cleaning and re-fixing complete all as specified and directed. Make : Milan or Equivalent |
| 109 | M&L for development of bore well of any capacity and size at the pressure 10 kg/sqcm to 15 kg/sqcm by diesel engine driven air compressor of capacity 620 cfm includiing air pipe and connected items to improve the yield of tube well complete all as specified and directed by Engineer in charge. |
| 110 | S&F in replacementy GI column pipe, heavy grade, class 'C', 50 mm bore of 3 metre length, heavy duty, flange welded on both ends complete all as specified and directed. |
| 111 | Supplying only Calcium Hypochlorite granuels with 65% to 70% chlorine content (In Drum) in the form of granular and tablet form complete all as specified and directed.Note: Payment for the subject item will only be made after producing purchase voucher and receipt of material from Engg in charge. |
| 112 | M&L for servicing of Dosing system including replacement of minor spare parts and rewinding of motor in DOSING pump motor complete all as specified and directed by Engineer-in-Charge. |
| 113 | M&L for Openning of gland packing coupling and removing the unserviceable gland rope from centrifugal/Monoblock pump set of capacity upto 30 HP fortnightly and fixing the new gland rope all as per existing size gland rope complete all as specified and directed. |
| 114 | S&F in replacement single phase high speed dewatering pump 220V 50 Hz with discharge upto 570 LPM and 30 Meter head at 2800 rpm alongwith suitable pipe as per outlet size of minimum 15 meter length, installed at the designated place complete all as specified and directed by Engineer-in-Charge. Make : KSB/Crompton/Kirloskar |
| 115 | S&F in replacement of flat submersible cable of size 2.5 Sqmm 3 Core,1100 Volt complete all as specified and directed by Engineer-in-Charge. |
| 116 | M&L for PCC (1:3:6) type C2 using 40mm graded aggregate as in foundation, Repair of road, repair to make good any surface under excavation after returning filling properly and including fair finish even and fair to exposed surfaces without using extra cement complete all as specified and directed. |
| 117 | Testing of drinking water being collected from local source (bore wells/shallow wells/under ground sumps) at Sangli Apartment area and submission of detailed test reqport to the office of Engineer-in-Charge.(a) Collection of water from different sources of water ie Sump in sterilized bottle and testing in Govt Approved laboratory as mentioned in specification.(b) Carrying out minimum essential testing of water as per IS 10500-1991 mandatory for chemical colour, odour, taste, turbidity, Lead, PH value TDS total hardness, iron, chloride, fluride and residual free chlorine and Bacteriological total Collie from organisms per 100 ml (MPN) and E Collie in 100 ml) and submission to this office with specific recommendation regarding suitability of water for drinking purpose.Note :- Rate quoted shall deemed to be included for : -(i) Cost of sterilized bottle as required.(ii) To and fro transportation charges for collection of samples from source. |
| 118 | Taking down water level indicator unit from Over head reservoir/Semi Under ground sump, supply and fix new water level indicator with complete accessories such as copper ball, necessary pully, nylon rope, steel Plate duly painted white with marking at every 10cm interval, letter writing of size 15mm width and 100mm long with signal red radium paint and painting of indicator with illumination postal red paint and erected at the height of 3 meter from ground level with necessary angle, nut and bolts rightly calibrated as per the tank level complete all as specified and directed by Engr-in-charge. |
| 119 | M&L for Construction of valves pit chamber having intermal dimension 120 cm x 120 cm x 120 cm (internal height) using PCC (1:4:8) 40mm graded stone aggregate for foundation 15 cms. Thick, 23 cm tick wall in CM (1:4), 10mm tick rendering all around the brick work with 1:6 cement mortar, PCC (1:2:4) type B1 coping with 20mm graded aggregate for grouting MS frame including 3mm tick MS top sheet cover with locking arrangement including 50mm pad lock with double key angle iron including painting of steel surface with two coats of synthetic enamel paint over a coat of red oxide primers including necessary excavation in any type of soil, returning filling in and removal of surpuls soil to a distance not exceeding 50 mtrs all as specified includung demolition/ dismantling of existing valve chamber complete all as specified and directed by the Engineer-in-Charge. |
| 120 | M&L for Providing and fixing ABC type (IS-13845) powder stored pressure type fire extinguishers of capacity 6 Kg consisting of welded MS cylindrical body, squeeze lever discharge valve fitted with pressure indicating gauge internal discharge tube, 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket, conforming to ISI finished externally with red enamel paint and fixed to wall with brackets complete with internal charge including taking down old usnv complete all as specified and directed by Engr in charge. |
| 121 | M&L for Providing and fixing Carbon-di-oxide fire extinguishers capacity 4.5 kg consisting of welded M.S cylinderical body,squeeze lever discharge valve fitted with internal dischargetube, 30cms long high pressure discharge hose, discharge nozzle, suspension bracket, confirming to IS : 934 finished externally with red enamel paint and fixed to wall with brackets with rawl plug/dash fasteners complete with internal charge including takign down old unsv complete all as specified and directed. |
| 122 | Supply, fixing, and commissioning of high-visibility photoluminescent (glow-in-the-dark) fire safety signages for a multi-storey building, manufactured from 2mm to 3mm thick rigid PVC or fire-retardant Aluminum Composite Panels (ACP) in accordance with IS 9457, IS 12349, and ISO 7010 standards; the scope comprehensively covers directional fire exit signs, equipment identification markers for extinguishers, hose reels, and manual call points, as well as floor numbering, staircase egress indicators featuring retro-reflective or high-intensity glow properties; all units must be securely installed using industrial-grade adhesives or mechanical fasteners at heights prescribed by the National Building Code (NBC) to ensure maximum legibility, durability, and a minimum luminance of 4–6 hours under emergency conditions complete all as specified and directed. |
| 123 | S&F single headed Stainless Steel fire hydrant landing valve type A (single head outlet) of 80mm dia landing valve with 63mm dia female outlet comlete and 80mm inlet with rubber blank cap and chain as per IS 5290-1983, sutable for brigade hose of 63mm with couplings conforming to IS 903 including taking down the existing one complete all as specified and directed by Engr– in-Charge. |
| 124 | Supply, fixing, testing and commissioning of wall mounting swinging type First aid fire hose reel with drum, hanging bracket,Thermoplastic rubber (first aid hose) as per IS 12585 20 mm dia 30 mtr length to with stand 20 kg per Sq cm working pressure fitted with gunmetal nozzle and shut off valve of any size complete all as specified. The hose reel shall be conforming to IS 884-1985 including for 25 mm dia MS pipe connection from riser to hose reel sockets,nipples,elbows,valve etc. Drum shall be fixed on adjoining wall through anchor fasteners/cement concrete hook or MS stand as per site requirement and the rate for fixing/hanging items in the rates quoted(for internal hydrant and one each an either side of stage) including taking down old unsv complete all as specified and directed by Engr-in-Charge. |
| 125 | S&F in replacement hose box made of 18 gauge MS sheet 750 mmx600mmx250mm with double door locking arrangement in front with 4mm thick glass and door frame made of 16 gauge MS sheet painted fire red outside and brilliant white inside making good surface and making arrangement for 2 hose pipe inside the box incl 65 mm pad lock complete all as specified and directed. |
| 126 | S&F in replacement Reinforced rubber lined fire hose pipe as per IS 636, type 'A', ISI marked, 63 mm nominal internal dia, 15 M long each, duly fitted with stainless steel coupling of 63 mm size, ISI marked with multi serrated tail and double instantaneous spring lock arrangement comprising of male half at one end and female half at other end complete with rubber cup washer and conforming to IS 903, suitable for hydraulic pressure of 21 kgf/cm2, complete all as specified and directed.Note: (a) Srl Item No 02.00 to 20.00, 22.00, 23.00, 29.00, 31.00 to 33.00, 45.00 to 53.00, 64.00, 65.00, 71.00, 90.00, 110.00, 113.00, 114.00, 119.00 to 121.00, 123.00 & 125.00 of BOQ are major items for the subject tender and material in respect of these items shall be procured within one month after placing of work order and produced before Engg in Charge alongwith original purchase vouchers as per direction of Garrison Engineer and shall obtain a certificate from Engg in charge that material in respect of above mentioned items have been submitted in the office of Engg in charge in their safe custody.(b) Materials in respect of Freakishly low declared items if any at the time of acceptance of contract shall be procured within one month after placing of work order and submit the same in the office of Engg in charge alongwith original purchase vouchers in their safe custody and shall obtain a certificate from Engg in charge. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysJul 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender