|
| 1 | Excavation in trenches not exceeding 1.5m width and not exceeding 1.5 m in depth and getting out in soft/loose soil for taking up/laying cable/pipe etc completed all as specified and directed by Engr- in Charge. |
| 2 | Returning , filling in trenches, including spreading , levelling , watering and well ramming in layers not exceeding 25 cm in Soft/loose soil completed all as specified and directed by Engr- in Charge. |
| 3 | Removal of excavated material at a distance not exc 50 mtr and dipositing where directed at a level not exc. 1.5 mtr above the starting point in Soft / loose soil completed all as specified and directed by Engr- in Charge. |
| 4 | Supply and laying dry Sand cushioning to underground cable with screened, washed river sand, including punning gently completed all as specified and directed by Engr- in Charge.Note:- Thickness after punning will be measured for payment. |
| 5 | Supply and laying for burnt brick old size sub class 'B' laid in trenches a butting each other with a gap not exceeding 10 mm , vertically over the cable for cable protectioncompleted all as specified and directed by Engr- in Charge. |
| 6 | M & L for Laying in trenches in road cross / floors tube galvanished iron light grade with all fittings for protection of cable of following dia/bore of pipe:- |
| 7 | 80 mm bore completed all as specified and directed |
| 8 | 50 mm bore completed all as specified and directed |
| 9 | Labour only for boring under road/drain by manual method for inserting the light grade pipe GI tubing up to 100 mm dia for cable protection complete all as specified and directed by Engineer In Charge. |
| 10 | M & L for taking down / out underground LT cable of aluminium conductor of up to 300 Sqmm of any core after disconnecting from sheet metal encloser / panel board or from OH line and taking out from trenches including taking out brick cable cover completed all as specified and directed by Engr- in Charge.Note:- Excavation/ earthwork will be measured and paid separately under respective items of this schedule. |
| 11 | Relaying of serviceable HT/ LT under ground cable (4 X 10 Sq mm to 3/3.5 X 300 Sq mm) obtained from taking out serviceable portion complete all as specified and directed by Eng-In-Charge. Note:- Straight through joints and all associated earth work like excavation/returning filling/removal of excavated material and sand filling will be measured and paid separately under respective item of this schedule |
| 12 | Supply and laying of cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sqmm 3.5 core complete all as specified and directed by Eng-In-Charge.Note:- Excavation / earth work will be measured and paid separately. |
| 13 | Supply and laying of cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70 sq mm 3.5 core complete all as specified and directed by Eng-In-Charge.Note:- Excavation / earth work will be measured and paid separately. |
| 14 | Supply and laying of cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 95 sq mm 3.5 core complete all as specified and directed by Eng-In-Charge.Note:- Excavation / earth work will be measured and paid separately. |
| 15 | Supply and fix 2.5 Sqmm three core PVC insulated, unsheathed multistranded copper conductor flexible cable1100 volts grade from junction box to street light fitting complete all as specified and directed by Eng-In-Charge. |
| 16 | Supply and fix 1.5 Sqmm three core PVC insulated, unsheathed multistranded copper conductor flexible cable 1100 volts grade, from junction box to street light fitting complete all as specified and directed by Engr in Charge. |
| 17 | Material & Labour for opening the existing any size of cable connections from existing junction boxes of street light poles, post top lanterns and building security lights and refixing the same with newly fitted lugs of appropriate size 10, 16, 25, 35, 50, 70 and 95 as the case may be, by opening the existing loop of cable in the roots of street light pole and making the connections new by peeling the insulation with strapper, making proper connections of cable in bus bar of junction box by fixing the new Nut bolts/studs and making flexible wire connection in MCB, MCB should be fixed properly also the junction box covers should be closed in proper manner and fixing the junction boxes on the clamp on the pole by bolts complete all as specified and directed by Eng-In-Charge.Note:- Necessary excavation work for opening the loop and return filling of the excavated material, lugs of appropriate sizes, Nut bolts and tape roll box and other associated works will be the part of this Job and no additional cost will be paid to the contractor, Cost of MCB,clamps will be paid under respective item of this schedule |
| 18 | Material & Labour for opening the existing any size of cable connections from existing junction boxes of street light poles, post top lanterns and building security lights and making the connections new by peeling the insulation with strapper, making proper connections of cable with newly fitted lugs in bus bar of junction box by fixing the new Nut bolts/studs and making flexible wire connection in MCB, MCB should be fixed properly also the junction box covers should be closed in proper manner and fixing the junction boxes on the clamp on the pole by bolts including checking of electric connection of LED street light on pole complete all as specified and directed by Eng-In-Charge. Note:- Necessary lugs of appropriate sizes, Nut bolts and tape roll box and other associated works will be the part of this Job and no additional cost will be paid to the contractor, Cost of MCB, clamps will be paid under respective item of this schedule |
| 19 | Material & Labour for load balacing at different control panels of street lights at different locations of HQ SWAC Chiloda by proper R,Y, B phase sequencing of the street light fittings so that the load in each phase will be equal and unbalace of load in any of the phase be sorted out. the test report before and after balancing will be submitted by the contractor complete all as specified and directed by Eng-In-Charge. |
| 20 | Supply only new MS clamps of size 40 X 5 mm in cros sectional area and upto 500 mm in length suitable for fixing the PVC Junction boxes to the street light poles and boundary walls as the case may be, including making necessary holes and nuts/bolts required for fixing the junction box to the poles either steel tubular or PCC Pole or at the boundary wall for post top lights complete all as specified and directed by Eng-In-Charge. |
| 21 | M & L for Taking down of old GI Pipe of any size and Supply and fixing on street light steel tubular Poles /PCC Poles /Walls galvanished iron light grade pipe upto 25 mm dia with all fittings for protection of cables hangig from the street lights to the junction boxes complete all as specified and directed by Eng-In-Charge. |
| 22 | Material & Labour for preparation of old painted surface of steel tubular pole (9/11 meter long above coping) and applying two coat of aluminium paint, making of strip of 20 cm width (sky blue and white in alternate band) upto 1400 mm height with one synthetic enamel paint and painting the existing MS clamp with one coat of aluminum paint complete all as specified and directed by Engr-in-Charge. |
| 23 | Material & Labour for preparation of old painted surface of LT RCC pole (up to 6.10 metre height above coping), applying two coat cement base paint, making of strip of 20 cm width (sky blue and white in alternate band) upto 1400 mm height with one synthetic enamel paint and painting the existing MS clamp with one coat aluminum paint complete all as specified and directed by Engr-in-Charge. |
| 24 | Supply and paste fluorescent type reflective tape of superior quality width 450 mm (three strips, each 150 mm wide and 600 mm long of colour white, sky blue, white), paste on steel tubular pole on outer circumferences including removing old tape complete all as specified and directed by Engr-in-Charge. |
| 25 | Material and labour for writting of Pole Nos on existing pole with stencil out with white colour in sky blue colour background of 80 mm hight around the radius of pole complete all as specified and directed by Engr-in-Charge. |
| 26 | Supply and fix in repair to timer switch Digital type 24 hours with 15 min and 30 min, 16/100 Amp contact rating 230 volts AC 50 Hzs suitable for street lights complete all as specified and directed by Engr-in-Charge. |
| 27 | Supply and fixing 3 pole power contactor type ML AC 3 rating up to 100 Amp Aux Contactors 2NO+2NC complete all as specified and directed by Engr-in-Charge. |
| 28 | Supply only MCB’s single pole with neutral 32 Amps, 230 volts complete all as specified and directed by Engr-in- charge. |
| 29 | S&F MCB’s TPN, 63 Amps, 415 volts , fixed in existing PVC box including connecting including taking down of old MCB complete all as specified and directed by Engr-in-Charge. |
| 30 | Supply only PVC box of outside size 350mm X 250mm X 150mm and inside size 300mm X 200mm X 105 mm including 4 Nos of bus bar strip of aluminium of size 25X4 mm suitable for 440 volts of suitable Amps rating complete all as specified and directed by Engr-in-Charge. |
| 31 | Supply and fix LED Bulb 15 watt complete all as specified and directed by Engr-in-Charge. |
| 32 | Supply and fix LED Bulb 9 watt complete all as specified and directed by Engr-in-Charge. |
| 33 | Supply & fix LED post top lanterns of 40 Watt (cool white / warm white) rated power and rated CCT 3000k, IP65 aesthatically designed spun Al spigot for mounting LED Driver and spun aluminium canopy which is painted white inside. Epoxy powder coated matt black finish after phosphochromate treatment, weather proof construction having robust design delivers to meet the landscaping needs , Luminaire type, to be fixed over galvanised pole of diameter upto 50 mm, complete all as specified and directed by Engr-in-Charge. Make:- Bajaj, Crompton, Havells or equivalent as approved by GE. |
| 34 | Supply & fix LED post top lanterns of 45 Watt (Tenco type) cool white / warm white rated power and rated CCT 3000k, IP65 aesthatically designed spun Al spigot for mounting LED Driver and spun aluminium canopy which is painted white inside. Epoxy powder coated matt black finish after phosphochromate treatment, weather proof construction having robust design delivers to meet the landscaping needs , Luminaire type, to be fixed over galvanised pole of diameter upto 50 mm, complete all as specified and directed by Engr-in-Charge. Make:- Bajaj, Crompton, Havells or equivalent as approved by GE. |
| 35 | Supply & fix LED post top lanterns of 25/30 Watt (cool white / warm white) rated power and rated CCT 3000K, IP65 aesthatically designed spun Al spigot for mounting LED Driver and spun aluminium canopy which is painted white inside. Epoxy powder coated matt black finish after phosphochromate treatment, weather proof construction having robust design delivers to meet the landscaping needs , Luminaire type,Opaline Model No. BLPTSP 25 W NW LED Make- Orient, Bajaj, Crompton, Havells or equivalent fixed over galvanised pole of diameter upto 50mm, complete all as specified and directed by Engr-in-Charge. Make:- Bajaj, C&S, Havells or equivalent as approved by GE. |
| 36 | Supply and fix 150 Watt LED flood light (cool white / warm white) with pressure die- cast aluminium housing, complete with all accessories, Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP66 flood light with high power LEDs as light source, suitable for highlighting architectural facade highmast and general purposelighting W Turo Floodlight luminaires with secondary optics made in pressure die cast housing and heat sink in aluminium extrusion and IP 66 Protection, Efficacy 110 Lm/w, 5700 K fixed in existing clamp and connecting with existing cable, including nuts, bolts and washer etc complete all as specified and directed by Engr-in-Charge. Make:- Bajaj, Crompton, Havells or equivalent as approved by GE. |
| 37 | Supply and fix 100 Watt LED flood light (Cool white / warm) with pressure die- cast aluminium housing, complete with all accessories, Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP65 flood light with high power LEDs as light source, suitable for highlighting architectural facade highmast and general purposelighting W Turo Floodlight luminaires with secondary optics made in pressure die cast housing and heat sink in aluminium extrusion and IP 66 Protection, Efficacy 110 Lm/w, 5700 K fixed in existing clamp and connecting with existing cable, including nuts, bolts and washer etc complete all as specified and directed by Engr-in-Charge. Make:- Bajaj, Crompton, Havells or equivalent as approved by GE. |
| 38 | Supply and fix 100 Watt LED flood light multi colour with pressure die- cast aluminium housing, complete with all accessories, Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP65 flood light with high power LEDs as light source, suitable for highlighting architectural facade highmast and general purposelighting W Turo Floodlight luminaires with secondary optics made in pressure die cast housing and heat sink in aluminium extrusion and IP 66 Protection fixed in existing clamp and connecting with existing cable, including nuts, bolts and washer etc complete. Make:- Bajaj, Crompton, Havells or equivalent as approved by GE. |
| 39 | Supply and fix 50 Watt LED flood light multi colour/Cool white / warm with pressure die- cast aluminium housing, complete with all accessories, Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP65 flood light with high power LEDs as light source, suitable for highlighting architectural facade highmast and general purposelighting W Turo Floodlight luminaires with secondary optics made in pressure die cast housing and heat sink in aluminium extrusion and IP 66 Protection fixed in existing clamp and connecting with existing cable, including nuts, bolts and washer etc complete all as specified and directed by Engr in charge. Make:- Bajaj, Crompton, Havells or equivalent as approved by GE. |
| 40 | Supply and fix in repair 30 Watt LED flood light multi colour/Cool white / warm with pressure die- cast aluminium housing, complete with all accessories, Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP65 flood light with high power LEDs as light source, suitable for highlighting architectural facade highmast and general purposelighting W Turo Floodlight luminaires with secondary optics made in pressure die cast housing and heat sink in aluminium extrusion and IP 66 Protection fixed in existing clamp and connecting with existing cable, including nuts, bolts and washer etc complete all as specified and directed by Engr in charge. Make:- Bajaj, Crompton, Havells or equivalent as approved by GE. |
| 41 | Supply & Fix 120 Watt LED street light luminarie new generation energy saving & environmental friendly long life versatile pressure die -cast aluminium IP66 road way luminarie with high power LED as light source and electronic driver, Secondary optical lens superior light distribtion, Efficacy 110 Lm/W,5700 K, minimum pole dia 50 mm fixed on existing GI bracket with electric connections with suitable cable complete all as specified and directed by Engr-in-charge. Make:- Bajaj, Crompton, Havells or equivalent as approved by GE. |
| 42 | All as per item No 39 above here in before but 90 watt complete all as specified and directed by Engr-in-charge. |
| 43 | All as per item No 39 above here in before but 70/72 watt complete all as specified and directed by Engr-in-charge. |
| 44 | All as per item No 39 above here in before but 60 watt minimum pole dia 40 mm complete all as specified and directed by Engr-in-charge. |
| 45 | All as per item No 39 above here in before but 30 watt minimum pole dia 40 mm complete all as specified and directed by Engr-in-charge. |
| 46 | Supply & Fix in square shaped Decorative LED Bollard light with polycarbonate diffuser, IP 65 of 9 watt with all accessories prewired fixed with PCC with nut/Bolt on exising Location complete all as specified and directed by Engr-in-charge.Make:- Bajaj, Crompton, Havells or equivalent as approved by GE. |
| 47 | Supply and fix LED BULK head light 10 watt Environmentaly friendly, ultra moden, energy mounted, surface mounted, decorative hexagon bulk head back-lit LED luminaire comprising of hight brightness LED complete all as specified and directed by Engr-in-Charge.Make:- Bajaj, Crompton, Havells or equivalent as approved by GE. |
| 48 | S&F in Decorative (Bamboo/cone type) LED Bollard light with opel diffuser & IP 65 Protection of 9 watt with all accessories prewired fixed with PCC with nut/Bolt on existing Location complete all as specified and directed by Engr-in-charge. Make:- Bajaj, Crompton, Havells or equivalent as approved by GE. |
| 49 | S&F bush and spike LED light luminaire 1 X 12/10 W (cool white / warm white) having IP-65 protection, with minimum system efficency > 85% made of pressure dia cast aluminium housing toughened glass in the front and peanut lens for batwing light distribution with excellent thermal management. The filling should have rated CCT 5000K complete with all accessories and all as specified and directed by Engineer in Charge. Make:- Bajaj, Crompton, Havells or equivalent as approved by GE. |
| 50 | S&F LED 12 V, 3 X 3 Watt colourful water proof underwater submersible Fountain lights in RGB Combination of colours with Automatic Controller System of 9 Watt complete all as specified and directed by Engr-in- Charge.Make:- Bajaj, Crompton, Havells or equivalent as approved by GE. |
| 51 | S & F in repair SMPS ( Rain prooof LED Power supply) input supply AC 190 to 260 volt and out put voltage 12 Volt DC + 5% Out put power 500 watt including taking down complete all as specified and directed by Engr-in-Charge. |
| 52 | S & F in repairs wire mesh net suitable for bollard light fitting of size 0.4m x 0.4m x 0.65m and all the four corner and top bottom angle iron framing of size 15x15x3mm and wire mesh net wire size 1.4mm dia and wire mess square gap 20mm with four no ring of size 10mm dia and tickness 3.0mm and made 5mm hole for inserting the stud size 5 cm long and 4 mm thic with suitable size bolt also welded in the bottom outer side for holding the casing including PCC 1:2:4 of 20 mm aggregate of size with one coat of red oxide primer and one coat blue colour paintcomplete all as specified and directed by Engr-in-Charge. Make:- Bajaj, Crompton, Havells or equivalent as approved by GE. |
| 53 | M & L for repairing the Existing LED bollard light fitting for any type and capacity , Taking down the unserviceable LED bollard light and repairing/replacing the unserviceable parts like drivers ,Sarch protection, internal wiring including pcc foundation etc and refitting the same with all connection after making serviceable complete all as specified and directed by Engr-in-Charge. Make:- Bajaj, Crompton, Havells or equivalent as approved by GE. |
| 54 | M & L for repairing the Existing LED post top lanterns for any type and capacity , Taking down the unserviceable LED post top lanterns and repairing/replacing the unserviceable parts like drivers ,Sarch protection, internal wiring etc and refitting the same with all connection after making serviceable complete all as specified and directed by Engr-in-Charge. Make:- Bajaj, Crompton, Havells or equivalent as approved by GE. |
| 55 | Material & Labour for earthing complete in repairs with galvanized iron earth plate electrode 600 mm X 600 mm X 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m deep below normal ground connected to GI strip of size 32 X 6 by means of bolts nuts check nuts and washer of galvanized steel, watering pipe of 20 mm bore, galvanised iron, medium grade, and 40 mm bore galvanised iron light grade for earth wire protection including all excavation earth work in any type of soil, PCC pit with RCC pit cover charcoal salt, funnel complete all as shown in the electrical plate No 3 of SSR part – I and tested on completion including taking down complete all as specified and directed by Engr-in-Charge. |
| 56 | Supply and fix in repair isolator 4 pole 63 Amps 415 volts 50 Hz including taking down complete all as specified and directed by Engr-in-Charge. Make:- L&T, Legrand, Havells or equivalent as approved by GE. |
| 57 | Supply and fix in repair isolator 4 pole 100 Amps 415 volts 50 Hz ncluding taking down complete all as specified and directed by Engr-in-Charge. Make:- L&T, Legrand, Havells or equivalent as approved by GE. |
| 58 | Lowering of high mast light assembly from 12 to 16 mtr high mast and refixing the complete assembly on 12 to 16 mtr top after checking replacement of unserviceable parts and components as required and make the light fittings operational to give rated illumination incl cleaning the acrylic/glass cover and refixing the same after repair/replacement of spare components complete with necessary electrical connection with two single core 2.5 Sqmm PVC sheathed multistranded copper conductor of required length complete all as specified and directed by Engr-in-Charge.Note:- 1. Spare parts/components shall be measured and paid separately under respective item of sch 'A' . 2. The greasing of pully, roller, bearing and gear including refixing rope clamp, adjustment of lock, lever etc deemed to be included in the item rate. |
| 59 | Supply and fix 200 Watt LED flood light with pressure die- cast aluminium housing, complete with all accessories, Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP65 flood light with high power LEDs as light source, suitable for highlighting architectural facade highmast and general purposelighting W Turo Floodlight luminaires with secondary optics made in pressure die cast housing and heat sink in aluminium extrusion and IP 66 Protection, Efficacy 110 Lm/w, 5700 K fixed in existing clamp and connecting with existing cable, including nuts, bolts and washer etc complete all as specified and directed by Engr-in-Charge. Bajaj, Crompton, Havells or equivalent as approved by GE. |
| 60 | M & L for taking down carefully existing unserviceable LED Flood light any type and any watt from the pole and existing location to carry the necessary repair like electronic driver,LED, Surge protection and rewiring the same complete and fixed to existing location including necessary electric connections complete all as specified and directed by Engr-in-Charge.Bajaj, Crompton, Havells or equivalent as approved by GE. |
| 61 | Supply and fixing trailing cable 4 Sqmm, 5 core copper conductor EPR insulated PCP sheathed cable having current carrying capacity 30 Amp complete all as specified and directed by Engr-in-Charge. |
| 62 | Supply and fixing trailing cable connector and terminal box suitable for 16/12 Mtr high mast . Make and model as per existing complete all as specified and directed by Engr-in-Charge. |
| 63 | Supply and fix in repair high mast 3 phase , 415 volt integeral motor 2 HP, with one No isolator 4 pole, 63 Amp complete all as directed by Engr-in-Charge. Make :- As per existing |
| 64 | M & L for taking down carefully existing unserviceable LED Street light any type and any watt from the pole and existing location to carry the necessary repair like electronic driver,LED, Sarch protection and rewiring the same complete and fixed to existing GI pipe bracket on pole including necessary electric connectionscomplete all as specified and directed by Engr-in-Charge.Note:- Contractor will provide suitable electrician and helper for routine complaints and rectified with in 48 Hrs otherwise recovery will be made Rs 500 per complaint per day Note:- The new electronic driver,LED, surge protection shall be measured and paid separately as supply only under relevant items. |
| 65 | Supply only electronic driver suitable for LED street light fitting of 25 to 120 watt and as per existing fitting complete all as specified and directed by Engr-in-Charge. Bajaj, Crompton, Havells or equivalent as approved by GE. |
| 66 | Supply only surge protection suitable for LED street light fitting of 25 to 120 watt complete all as specified and directed by Engr-in-Charge. |
| 67 | Supply only LED suitable for LED street light fitting of 25 to 120 watt complete all as specified and directed by Engr-in-Charge. |
| 68 | S & F street light bracket made out of 40 mm bore GI tubing medium grade 1.20 Mtr long bend to required shape as in bracket for street light fittings fixed with two pair or MS flat iron 40mm X 5mm size and 30cm long clamp of required shape with bolts nuts and washers suitable for steel tubular pole (incl painting) complete all as specified and directed by Engr-in-Charge. |
| 69 | Supply and fixing street light bracket made out of 40 mm light grade GI tubing minimum 1.2 mtr long(incl painting) with suitable adapter to suit the opening of street light on one end alongwith integrated fabricated adapter round cup type with 4 Nos studs on outer side to fix the bracket on top of existing steel tubular pole two way,with necessary MS clamps with one coat of red oxide and two coats of aluminium paint upon fabricated adapter including nut, bolt, washers including taking down complete all as specified and directed by engineer-in- charge. |
| 70 | Supply and fix lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fitting including taking down complete all as specified and directed by Engr-in-Charge. |
| 71 | Supply and connecting of battary 12 volt 42 Ah , Sealed maintainenace free rechargeable with battery terminals and copper lead for +ve and -ve ends wit complete fixing and testing complete all as specified and directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
