Tender For Provn Of Road From Cook House To Gate No 03 Of 16 Rajput Under Ge (East) Lucknow.
Tender Value
29.13 Lakhs
Estimated cost
Bid Submission
14 Jul 2026
1 days left
EMD
58260
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Road From Cook House To Gate No 03 Of 16 Rajput Under Ge (East) Lucknow.
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation not exc 30 cm deep averaging 15 cm deep and getting out in soft/ loose soil. |
| 2 | Rolling and consolidation formation surface in cutting of scarified exc. 8 tonne & n.exc. 12 tonne |
| 3 | Providing of earth filling for berm with approved earth,spreading, leveling & compecting n exc. 30 cm thick Layer, watering, ramming/rolling and finishing to required size, shape,etc.n exc. 1.5m high from base inc bringing of approve earth. |
| 4 | M&L Soling (or sub base) with 200 mm thick broke boulders or quarried stone, interstices filled, surface formed and rolled and considered to required gradient and camber |
| 5 | M&L 150 (75+75) mm thick (compacted thickness) WBM in two layer with coarse aggregates of grading 2(first layer) (63 to 40mm size) or of grading 3 (second layer) (50 to 20mm size), spread, rolled and consolidated to gradient and camber required |
| 6 | Preparing surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. |
| 7 | Applying evenly a priming/tack coat with bitumious primer using paving bitumiouns of any penertration at 10kg/10sqm |
| 8 | Premix bituminous, macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) |
| 9 | M&L for bituminous premix asphaltic semi dense concrete, 40 mm (consolidated thickness) with 5.5% paving bitumen binder of VG 30, by weight of total mix, rolled and compacted to required camber and radient with 8 to 12 tone capacity power roller to a uniform smooth surface as specified and as directed by Engineer-in-Charge. |
| 10 | Providing and applying 2.5 mm thick road marking strips with 250 gram Glass Beads(retroreflective) of specified shade/colour using hot thermoplastic material by fully/semi-automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoes heater, driven by experoenced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dier, seals, oil, grease and foreign material etc, complete as per direction and accordance with applicable specifidactions as per MoRTH specification having Titatnium -12%, Resin-19% & Intermix Glass Beads - 34 % in proportion. |
| 11 | M&L Continuous brick edging; with width equal to the depth of the brick laid on end vertically |
| 12 | Supply and fixing cat eyes with two way solar reflective type with 30 mm length double shank of plastic body of size 100mm x 110mm x 20mm (overall height 50 mm) and with PAMA striplens reflector and weight 164 gram fixed with special epoxy chemical as per manufactures instructions. |
| 13 | Supply and fixing aluminium-alloy body Solar stud with following specification :-(a) Solar panel Mono-Crystalline Solar 2.4V/0.3 Watt and having charging capacity at a very low sunlight.(b) Red colour Six Super Bright LEDs with 10000 to 18000 mcd (Millicandela) 8 mm fitted at appropriate height for clear blinking point.(c) 1.2V Ni-MH or Ni-CD rechargeable battery capacity 1300 mAh. LSD (Low Self Discharge technology) fitted inside solar stud.(d) Working time 3 to 4 days successively after the battery is fully charged.(e) Charging time for full charge One full sunny day.(f) Working temperature : 10 to 75 Degree Celcius.(g) Flash rate : 60 to 70 times per minute normally.(h) Brightness sensitive auto-switch, automatically turns on at dusk and turns off at dawn to ensure easy and safe night driving.(j) High visibility LEDs help ensure easy and and safe night driving from a distance of 1000-1100 Meters approx.(k) Solar stud should be free of maintenance and operational in all weather conditions.(i) The PCB board and solar panel should be sealed in Poly Carbonate case for extra waterproofing and high/low temperature protection. The logo of the manufacturer should be embossed on front side of the body to ensure genuinesess.Dimension/Size of the Solar Std should be 125 mmx125mmx25 mm body, with shank height 65 mm (Total height 90 mm including shank)(m) Weight of the Solar Stud should be 650 Gram approx.(n) Minimum 150 gram of a special epoxy chemical should be used per pcs to fix the stud on the road surface. |
| 14 | M&L for Hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface |
| 15 | M&L 100 mm thick cement concrete1:4:8 type D2 using 40 mm graded stone aggregate as in sub base of floor |
| 16 | Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete. |
| 17 | M&L brick work with sub class B bricks, straight or curved on plan any radius half brick thick wall, built in cement mortar 1:4 |
| 18 | M&L for rendering 10mm thick on brick work in CM 1:4 finished even and smooth. |
| 19 | M&L for PCC 1:2:4 type B2 using 40 mm graded stone aggregate as in coping/path |
| 20 | M&L for 450 mm reinforced concrete pipes, class NP2, laid and jointed complete with collars including jointing with cement joints with PCC bed and haunching with PCC 1:4:8 type D-2 using 40mm graded stone aggregate for 150mm bore NP2 pipe line including excavation and earth work and returning, filling in trenches and removal of soil upto 1.5m, including taking up broken sewage pipe line , all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender