Public Administrative Department Local Bodies Closing in 0 days TDR #56135605

Tender for Construction of Lanes and Drains and Other Allied Works at Pacca Talab Kaccha Talab Press Morh and Bagh Mohalla in Ward no 47 Jammu

Issued by Local Bodies · Jammu, Jammu and Kashmir
Tender Value
30 Lakhs
Estimated cost
Bid Submission
13 Jul 2026
0 days left
EMD
60000
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Construction of Lanes and Drains and Other Allied Works at Pacca Talab Kaccha Talab Press Morh and Bagh Mohalla in Ward no 47 Jammu

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 03-Jul-2026 change of work completion time and other conditions Other 13-Jul-2026

BOQ

Name of Work:-
Sl. No. Item Description
1Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix)
2Demolishing R.C.C. Work manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge:
3Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 meter lead as per direction of Engineer-in-Charge.
4Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 min width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:1 meter from cutting edge all kinds of soil.
5Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
6Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with: 1:5:10 (1 cement : 5coarse sand : 10graded stone aggregate 40 mm nominal size)
7Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columns.
8Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size
9Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.
10Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
11Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.
12Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand,compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.
13Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
14Centering and shuttering including strutting, propping etc. and removal of form work for column pillar piers etc
15Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc.,including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
16Providing and fixing of mild steel benches complete job as per directions of Engineer Incharge
17Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work
18Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete,on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) .B379.2 Medium shade using 50% white cement and 50% ordinarycement.
1912 mm Cement Plaster of mix 1:4 (1 Cement:4 Fine sand)
20Removal of mulba from site of work to beyond muncipal Muncipal limits including loading unloading complete
21Carriage of material by M.T of side including loading unloading complete Sand 10 Km+Stone Agg 10 Km
22Engaging Labours of Clearance of Site, Sewers, Bush cutting etc.
23providing and fixing of Inaugration of Name Plate including Pedstal all complete job Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56135605
AUTHORITY Local Bodies
TENDER VALUE 30 Lakhs
LAST DATE 13-07-2026
Authority
Authority Name Jammu Municipal Corporation
Work Description Tender for Construction of Lanes and Drains and Other Allied Works at Pacca Talab Kaccha Talab Press Morh and Bagh Mohalla in Ward no 47 Jammu
Basic Detail
Tender No PWD(RB)DIV/JMC/15 of 2026 -27 Dated 23-06-2026
Bidding Type Tender
Location
City Jammu
State Jammu and Kashmir
Key Dates
Publish Date 03 Jul 2026
Submission Date 13 Jul 2026
Open Date 01 Jan 0001
Finance
Tender Value 30 Lakhs
Tender Fee 600
EMD 60000
Exemption Not Available
Document List
BOQ_1014304.xls
d504a6ee-c64f-47b5-b8ef-35d63f45bc94.html
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 03, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Jul 13, 2026
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Today
Jul 13, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Today

Tender Documents

Download All (ZIP) ↓
xls

BOQ_1014304.xls

html

d504a6ee-c64f-47b5-b8ef-35d63f45bc94.html

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders