|
| 1 | Cylinder mountable-Gas- CO2- Pressure Regulating Valves- Dual Stage, Make - Baldota, Inlet Pressure: Max 80 Kg/cm2 (CO2 cylinder pressure), Body: SS, Outlet pressure: 0 - 15 Kg/cm2, Medium: Carbon Di-Oxide, Inlet connection: 1/2\\" FNPT, Outlet connection: 1/2\\" FNPT, Inlet Entry: Left side of PRV front, Inlet and outlet shall be 180 Deg Opposite to each other, Flow: 20 m3/Hr Maximum. Inlet Pressure gauge: 0- 100 kg/cm2, Outlet Pressure Gauge: 0 - 16 Kg/cm2, with pre filter of 5 Micron Relief Valve at outlet: Set at 10 Kg/cm2 Note: Inlet gauge, outlet gauge, 5 Micron pre-filter & RV shall not connected to PRV & kept loose. + Separate Adaptor Male & female for standard cylinder. | Cylinder mountable-Gas- CO2- Pressure Regulating Valves- Dual Stage, Make - Baldota, Inlet Pressure: Max 80 Kg/cm2 (CO2 cylinder pressure), Body: SS, Outlet pressure: 0 - 15 Kg/cm2, Medium: Carbon Di-Oxide, Inlet connection: 1/2\\" FNPT, Outlet connection: 1/2\\" FNPT, Inlet Entry: Left side of PRV front, Inlet and outlet shall be 180 Deg Opposite to each other, Flow: 20 m3/Hr Maximum. Inlet Pressure gauge: 0- 100 kg/cm2, Outlet Pressure Gauge: 0 - 16 Kg/cm2, with pre filter of 5 Micron Relief Valve at outlet: Set at 10 Kg/cm2 Note: Inlet gauge, outlet gauge, 5 Micron pre-filter & RV shall not connected to PRV & kept loose. + Separate Adaptor Male & female for standard cylinder. |
| 2 | Cylinder mountable-Gas- Helium BALDOTA make Dual Stage Diaphragm type regulators- for HELIUM SERVICE Body – SS 316 Diaphragm- SS 316L Inlet- 0-210 kg/cm22 Outlet Pressure- 0-7 kg/cm2 Inlet Conn : ¼” NPTF, Outlet Conn : ¼” NPTF Relief Valve at outlet: Set at 10 Kg/cm2 Note: Inlet gauge, outlet gauge, 5 Micron pre-filter & RV shall not connected to PRV & kept loose.+ Separate Adaptor Male & female for standard cylinder | Cylinder mountable-Gas- Helium BALDOTA make Dual Stage Diaphragm type regulators- for HELIUM SERVICE Body – SS 316 Diaphragm- SS 316L Inlet- 0-210 kg/cm22 Outlet Pressure- 0-7 kg/cm2 Inlet Conn : ¼” NPTF, Outlet Conn : ¼” NPTF Relief Valve at outlet: Set at 10 Kg/cm2 Note: Inlet gauge, outlet gauge, 5 Micron pre-filter & RV shall not connected to PRV & kept loose.+ Separate Adaptor Male & female for standard cylinder |
| 3 | Cylinder Mountable for Oxygen Gas PRV- BALDOTA make dual Stage Diaphragm type regulators- for OXYGEN SERVICE Body – SS 316 Diaphragm- SS 316L Inlet- 0-120 kg/cm22 Outlet Pressure- 0-7 kg/cm2 Inlet Conn : ¼” NPTF, Outlet Conn : ¼” NPTF Relief Valve at outlet: Set at 10 Kg/cm2 Note: Inlet gauge, outlet gauge, 5 Micron pre-filter & RV shall not connected to PRV & kept loose. + Separate Adaptor Male & female for standard cylinder. | Cylinder Mountable for Oxygen Gas PRV- BALDOTA make dual Stage Diaphragm type regulators- for OXYGEN SERVICE Body – SS 316 Diaphragm- SS 316L Inlet- 0-120 kg/cm22 Outlet Pressure- 0-7 kg/cm2 Inlet Conn : ¼” NPTF, Outlet Conn : ¼” NPTF Relief Valve at outlet: Set at 10 Kg/cm2 Note: Inlet gauge, outlet gauge, 5 Micron pre-filter & RV shall not connected to PRV & kept loose. + Separate Adaptor Male & female for standard cylinder. |
| 4 | Cylinder mountable-Gas- Nitrogen-Pressure Regulating Valves- Dual Stage, Make - Baldota, Inlet Pressure: Max 210 Kg/cm2 (Nitrogen cylinder pressure), Body: SS, Outlet pressure: 0 - 15 Kg/cm2, Medium: Carbon Di-Oxide, Inlet connection: 1/2\\" FNPT, Outlet connection: 1/2\\" FNPT, Inlet Entry: Left side of PRV front, Inlet and outlet shall be 180 Deg Opposite to each other, Flow: 20 m3/Hr Maximum. Inlet Pressure gauge: 0- 280 kg/cm2, Outlet Pressure Gauge: 0 - 16 Kg/cm2, with pre filter of 5 Micron Relief Valve at outlet: Set at 12 Kg/cm2 . Note: Inlet gauge, outlet gauge, 5 Micron pre-filter & RV shall not connected to PRV & kept loose + Separate Adaptor Male & female for standard cylinder. | Cylinder mountable-Gas- Nitrogen-Pressure Regulating Valves- Dual Stage, Make - Baldota, Inlet Pressure: Max 210 Kg/cm2 (Nitrogen cylinder pressure), Body: SS, Outlet pressure: 0 - 15 Kg/cm2, Medium: Carbon Di-Oxide, Inlet connection: 1/2\\" FNPT, Outlet connection: 1/2\\" FNPT, Inlet Entry: Left side of PRV front, Inlet and outlet shall be 180 Deg Opposite to each other, Flow: 20 m3/Hr Maximum. Inlet Pressure gauge: 0- 280 kg/cm2, Outlet Pressure Gauge: 0 - 16 Kg/cm2, with pre filter of 5 Micron Relief Valve at outlet: Set at 12 Kg/cm2 . Note: Inlet gauge, outlet gauge, 5 Micron pre-filter & RV shall not connected to PRV & kept loose + Separate Adaptor Male & female for standard cylinder. |
