Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | CIVIL WORKS |
| 2 | Dismantling the tile work in floors and roofs laid in cement including stacking of materials within 50 meters lead for thickness of tiles 10mm to 25mm. |
| 3 | Demolishing cement concrete 1:3:6 or richer mix including disposal of material within 50 m lead. |
| 4 | Demolishing dry bricks, pitching in floors drains etc., including stacking of serviceable and disposal of unserviceable material within 50 mts. lead. |
| 5 | Clearing grass and removal of rubbish upto a distance of 50 m outside the periphery of the area |
| 6 | Transportation and carriage of excavated material by tipper truck including loading, unloading and stacking upto 5 Km |
| 7 | Earthwork in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sq.m on plan) including disposal of excavated earth lead upto 50 m and lift upto 1.5m disposed earth to be leveled and neatly dressed including providing barricading, danger lighting guarding as directed in :All kinds of soil |
| 8 | Earthwork in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sq.m on plan) including disposal of excavated earth lead upto 50 m and lift upto 1.5m disposed earth to be leveled and neatly dressed including providing barricading, danger lighting guarding as directed in :All types of Ordinary rock including all types of laterite rock, blasting prohibited |
| 9 | Refilling the pipeline/foundation trenches plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer . |
| 10 | Banking excavated earth in layers not exceeding 20 cm in depth breaking clods, watering, rolling each layer with 1/2 tonne roller, or wooden or steel rammers, & rolling every 3rd & top most layer with power roller of minimum 8 tonnes & dressing up in embankments for roads, flood banks, marginal banks, and guide banks, etc. lead upto 50 m. and lift upto 1.5 m.Deduct for not rolling with power roller minimum 8 tonnes in item No. . |
| 11 | Rubble packing with hard laterite stone with available material on site under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete. |
| 12 | Providing & laying cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggregate 20 mm. nominal size) excluding cost of centering, shuttering and finishing in: All work up to Plinth level |
| 13 | Making plinth protection 50mm thick of Cement Concrete 1:3:6 (1cement: 3 Coarse Sand: 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry laterite aggregate 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. |
| 14 | Providing & laying cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded granitic or basaltic stone aggrt. 40 mm. nominal size) excluding cost of centering, shuttering and finishing in:All works upto plinth level |
| 15 | Providing & laying cement concrete 1: 1.5: 3 (1 cement: 1.5 coarse sand: 3 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in:All works upto plinth level |
| 16 | Centering and shuttering including struttings, propping etc. and removal of formwork for :Foundations, footings, bases for columns and mass concrete. |
| 17 | Centering and shuttering including struttings, propping etc. and removal of formwork for :Vertical surfaces such as retaing walls, return walls, Partitions, walls (any thickness) including attached Pilasters, Buttresses, Plinth and string courses, Fillets and the like |
| 18 | Centering & shuttering including Strutting, Propping & removal of forms for :Suspended floors, roofs landings, shelves & their supports |
| 19 | Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 4 (1 cement : 4 coarse sand) in foundation and basement. |
| 20 | Laterite masonry in neatly dressed stones for 23 cms thick masonry walls in c.m. 1 : 4 (1 cement : 4 coarse sand in foundation upto plinth level |
| 21 | Laterite masonry in neatly dressed stones for 23 cms thick masonry walls in cm. 1 : 5 (1 cement : 5 coarse sand) in foundation upto plinth level Extra for laterite masonry in all sizes in superstructure from floor I level upto floor V level |
| 22 | 20mm cement plaster 1: 4 (1 cement : 4 coarse sand) |
| 23 | Extra for providing and mixing water proofing material proportion recommended by the manufacturers. 20mm cement plaster 1: 4 (1 cement : 4 sand) |
| 24 | Rough cast plaster with a mixture of sand and gravel or crushed stone from 2.36mm to 12.5mm nominal size dashed over and including fresh plaster in two layer 12mm cement plaster 1:4 (1 cement : 4 coarse sand) and top layer 10mm cement plaster 1: 3 (1 cement : 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement. Natural cement finishing using ordinary cement |
| 25 | An elastomeric, cementitious, waterproof coating for concrete and masonry.Providing and applying on a well prepared vertical surface Masterseal 550EL of BASF make or equivalent elastomeric flexible, two component polymers modified cementitious composite system that requires no addition of water at the site. The product shall be applied in minimum two coats to achieve total DFT of 1mm. The material shall be mixed and applied fully in accordance with the manufacturer's instructions. The product shall exhibit at least 40% elongation at ambient & 30% elongation in under water condition with tensile strength greater then 20 Kg/cm2. The product shall resist 1.5 bars pressure when tested as per DIN 1048 at 2mm DFT. When applied at 2mm DFT, elastomeric coating shall be able to bridge crack up to 0.5mm width. All scaffolding, ladders, supporting materials etc. complete. Rates shall be inclusive of all labour, materials, tools and plant etc. complete. |
| 26 | Providing and laying in position (1:11/2:3) Reinforced cement conrete excluding the cost of centering, shuttering, finishing and reinfrocement (1 cement: 1½ coarse sand:3 graded stone agg 20mm nominal size)All works upto plinth level |
| 27 | Providing and laying in position (1:11/2:3) Reinforced cement conrete excluding the cost of centering, shuttering, finishing and reinfrocement (1 cement: 1½ coarse sand:3 graded stone agg 20mm nominal size) In walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and structs etc. upto floor five level |
| 28 | Providing and laying in position (1:11/2:3) Reinforced cement conrete excluding the cost of centering, shuttering, finishing and reinfrocement (1 cement: 1½ coarse sand:3 graded stone agg 20mm nominal size) |
| 29 | Providing TMT steel reinforcement bars of (SAIL, TATA. VIZAG, JSW Steel Ltd.) ) (Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member. |
| 30 | Steel work welded (SAIL, TATA. VIZAG & using electrodes of Ador or ES4B or Deh Secheron make only)in built up sections trusses and framed work including cutting, hoisting, fixing in position and applying priming coat of red lead paint. |
| 31 | Steel work(SAIL, TATA. VIZAG only) riveted or bolted in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint. |
| 32 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of (SAIL, TATA. VIZAG, JSW ,APOLLO Steel Ltd.) make (Min Yeild Stress 310 Mpa)) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 33 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc.with hairline finish, including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 34 | Providing and and laying scratch resistant floor tiles in different sizes of Johnson, Somany, Kajaria (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make in colours and shades as specified Fixing glazed / ceramic / vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (water based) conforming to IS:15477, using 5 kg. adhesive per sq.m of tile area, in average 3 mm thickness including grouting the joints with white cement and matching pigment etc., complete 600x 600 mm Dark Shades |
| 35 | Providing and laying Jet black flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer : Flamed finish granite stone slab. |
| 36 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer : Flamed finish granite stone slab. b) Cherry Red |
| 37 | Providing and fixing Jet black Granite stone slabs (flamed finish) 18mm thick in risers of steps, skirting, dado and pillars laid on cement paste and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete |
| 38 | Kotah stone slab flooring over 20 mm (average) thick base laid over & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) |
| 39 | Kotah stone slab flooring over 25 mm thick in risers of steps, skirtings, dado & pillars laid on 12mm (average) thick cement mortor 1:3 (1 cement : 3 coarse sand) & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete. |
| 40 | Providing and and laying 300 x 300 mm Design - Liner vitrified unglazed porcelain tactile floor tiles in different sizes of Johnson, Somany, Kajaria (thickness to be specified by the manufacturer) and conforming to IS:15622 of approved make in colours and shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigment etc., complete |
| 41 | Providing and and laying 300 x 300 mm Design - Buttons vitrified unglazed porcelain tactile floor tiles in different sizes of Johnson, Somany, Kajaria (thickness to be specified by the manufacturer) and conforming to IS:15622 of approved make in colours and shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigment etc., complete |
| 42 | Painting three or more coats with acryllic exterior paint of approved brand and manufacture (Such as Dulex/ Asian Paints/ Sherwin Willians) including applying one coat of cement primer and one coat of surface treatment etc. complete. |
| 43 | Providing and fixing 1 mm thick M.S. sheet garage door with frame of 40 x 40 x 6 mm angle iron 3.15 mm M.S. gusset plate at the junction and corners, all necessary fitting complete including applying a priming coat of red lead paint. |
| 44 | Supply and fixing of Anti-Skid Multipurpose Commercial PVC Floor Mat of Swachh Elite / Swachh Premium or equivalent, thickness 4mm / 6mm, textured surface, color & pattern as selected, including complete installation and all necessary works, as per specifications. |
| 45 | Designing, supplying, and installation of prefabricated FRP (Fiber Reinforced Polymer) of 2-3 mm thick, kiosk/cabin of approved design, shade and specifications, factory-fabricated and engineered to be weather-resistant, corrosion-resistant, termite-proof, and UV-stabilized, ensuring long-term durability under diverse climatic conditions. The kiosk shall be delivered as a complete unit with insulated wall and roof panels, integrated electrical conduits, proper ventilation arrangements, and necessary 12mm Toughened Glass door and window fittings including Door Clouser, Stopper and Handle Lock system as per final approved drawings and design with Kavi Art on it. The structure shall be mounted on a robust base MS frame with adequate provision for lifting, transportation, and reinstallation, ready for immediate use upon installation. Constructed using premium-grade Fibre Reinforced Polymer (FRP), the kiosk ensures enhanced thermal insulation, structural strength, and long-term usability.Internal Dimensions: 2.7 meters (Length) x 2.7 meters (Width) x 3.0 meters (Height)Structure: Integrated FRP panels with internal necessary MS framework for structural stability Roof: Sloped FRP roof with integrated water drainage and thermal insulation and flooring.The contractor shall submit the shop drawings for approval from the Architect/Client prior to the execution of the work. Fiber Reinforced Polymer @ marine quality Composite. It is Reinforced with glass fibre Chopped Strand Mat EMC450, with Area Weight of =/-7.5% as per ISO3374, Moisture Content of <20% as per ISO3344, Size Content of 3.7(1+31%) as per ISO 1887 and Breakage Strength of >140N as per ISO 3342. The resin has Viscosity at 25°C ( P ): 400 to 500, Acid Value (mg KOH/gm): 15-20, SpecificGravity at 25°C: :1.11‡0.02, Volatile content (%): 38 +/-3, Gel time at 30°C (minutes), (with Resin = 100 grams; Accelerator 3% Cobalt Octoate = 1.0 and Catalyst MEKP M-50= 1.5 ml):8 to 12. Cured clear Cast Resins comes with following properties: Barcol hardness: 42, : 42 Heat deflection temperature (°C): 94, Tensile strength (kg/cm2): 600, Tensile modulus Map of 3100; Elongation at break: 2.5%; Flexural strength (kg/cm2): 1050, Flexural modulus (Mpa) of 3200, Water absorption @25°C (mg) (after 24hours) of 20. The method-of-testing and the tolerances are as prescribed in IS-6746-1994. The Contractor shall obtain approval from the Architect for all designs prior to the execution of the work. |
| 46 | Supply, installation, testing, and commissioning of a 55-inch commercial-grade digital standee display unit with integrated flat LED/LCD panel and multimedia system. The display shall support a resolution of 3840×2160 pixels (4K UHD) with a 16:9 aspect ratio, 178° wide viewing angle, and Dolby stereo audio output with a minimum of 20W audio wattage. The display shall support PNG and JPEG image formats and offer high-definition content playback with a response time in milliseconds suitable for commercial-grade display use.The unit shall come with 8GB RAM and 128GB internal memory and operate on either Android or Windows OS (as specified), with support for both USB and HDMI connectivity. It shall include an ATSC tuner technology, Wi-Fi connectivity, and operate at 120 volts AC. The digital standee shall be of sturdy commercial-grade build suitable for continuous operation in indoor environments and include pre-installed software for media playback and remote content management. The system shall be delivered fully assembled with all required mounting hardware and power accessories.The item shall include 1-year comprehensive on-site warranty, after which Annual Maintenance Contract (AMC) may be taken of the equipment per annum, as per user requirement. All logistics, packing, forwarding, freight, insurance, and handling costs up to the site of installation shall be included in the item rate.The complete unit shall be supplied, installed, and commissioned by technically qualified personnel, ensuring functionality, connectivity, alignment, and safety. All documentation including user manual, warranty certificate, and compliance certificates shall be handed over upon installation. |
| 47 | Supplying, installing, testing, and commissioning of a dual-vessel filtration system with a total capacity of 10 KLD, consisting of two FRP vessels of size 1465 (14\\" × 65\\") or equivalent. One vessel shall be filled with activated carbon media for effective removal of odor, color, chlorine, and organic impurities, and the other vessel shall be charged with a multi-layered filtration bed comprising sand, gravel, anthracite, and MnO₂ for turbidity, sediment, and iron reduction. The system shall be skid-mounted or floor-mounted as required, and shall include all necessary piping, valves, internal distribution systems, pressure gauges, drain and sampling points, and associated accessories. Complete installation at site shall include unloading, positioning, media filling, interconnecting piping, flushing, hydro-testing, trial run, and commissioning. The system shall be suitable for use as a pre-treatment unit in water purification applications and shall be supplied with a one-year comprehensive warranty. |
| 48 | Providing and fixing chlorinated polyvinyl chloride (CPVC) 20 mm nominal outer dia pipes confirming to IS: 15778 having thermal stability for hot and cold water supply includng all CPVC plain and brass threaded fittings CPVC solvent cement, trenching, refilling and testing of joints complete as per firectionof the Engineer in charge.(External work (heavy duty SDR 11 pipe) |
| 49 | Providing and fixing chlorinated polyvinyl chloride (CPVC) 32 mm nominal outer dia pipes confirming to IS: 15778 having thermal stability for hot and cold water supply includng all CPVC plain and brass threaded fittings CPVC solvent cement, trenching, refilling and testing of joints complete as per firectionof the Engineer in charge.(External work (heavy duty SDR 11 pipe) |
| 50 | Constructing brick masonry manhole or inspection chamber with second class bricks in cement mortar 1:5 (1 cement :5 fine sand) R.C.C. top slab with 1:2:4 mix (1 cement: 2 coarse sand ;4 graded stone aggregate 20mm nominal size foundation concrete 1:2:4 mix (1 cement ;2 coarse sand :4 graded stone agrregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cemetn and making channels in cement concrete 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) neatly finished complete as per standard design.Inside size 60 x 60cm and 60cm deep including C.I. cover with frame (light duty) 455x610mm internal diameter total weight of cover and frame to be not less than 38 kg. (weight of cover 23 kg). |
| 51 | Providing and fixing rigid 110 mm dia PVC S.W.R. (soil, waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed: |
| 52 | Providing and fixing square-mouth S.W. gully trap grade ‘A’ complete with c.i. grating brick masonry chamber and water tight C.I. cover with frame of 300 x 300 mm size (inside the weight of cover to be not less than 4.53 kg). And frame to be not less than 2.72 kg as per standard design |
| 53 | RECTANGULAR COVER WITH FRAME (HINGED) Size - 600mm x 900mm, Class B - 125, Grade - MD,Weight - 105Kg |
| 54 | Pure epoxy resin based anchoring mortar for anchoring of rebars Providing and Supplying which is a two-component, thixotropic, pure epoxy resin based chemical anchoring mortar. The product is specially designed for applications where heavy loads under critical conditions are to be fixed in concrete. Both components of Masterflow® 935, packed in a single cartridge with separate compartments, are correctly mixed in the mixing nozzle during application. The product should be styrene free fomultation and shall have very low shrinkage, even on big diameters. All scaffolding, ladders, supporting materials etc. complete. Rates shall be inclusive of drilling of requisite holes in concrete, all labour, materials, tools and plant etc. complete. |
| 55 | Providing and laying finolex roof covering with fittings on existing battens as directed by Engineer in charge.PVC corrugated sheet - 2.0 mm thick. |
| 56 | Providing and fixing Prince or equivalent make PVC SWR half round eaves gutter with bolts, nuts and flat iron brackets 40 x 3 mm size complete.140 mm nominal size |
| 57 | Providing & fixing False Ceiling Yashashri make or equivalent, made out of 2” x 1” M.S sq tube frame support structure & 20mm x 155mm x 1.2mm multi-cavity upvc section, 30mm x 40mm x 2mm Upvc multi-cavity section with hidden screwing system. The average weight of False Ceiling is 8.50 kg per sq mtr. These Upvc sections are tested by using BS 2782 & DIN 53459 test methods. |
| 58 | Providing and fixing Everest Rapicon Wall Panel of 75mm thickness (including 5mm thick Fibre Cement Boards on both sides and lightweight concrete core), with factory-beveled or site-beveled edges, having an apparent density of minimum 700–800 kg/m³, thermal conductivity (K-value) of 0.12 K.cal/hr·m·°C, fire resistance of 134 minutes as tested as per BS 476 Part 20–22, and Sound Transmission Class (STC) of 40 dB as tested in accordance with IS 9901 Part-3:1981. Panels shall be of size 600 mm width and 3000 mm height and fixed in vertical position by inserting into pre-installed GI floor and ceiling track profiles. Where height exceeds 3.0 metres, panels shall be installed with staggered longitudinal joints ensuring a minimum overlap of 1.5 metres. All panel joints and wall peripheries shall be sealed using 6–10 mm dia backer rod and silicone sealant to ensure airtightness and sound insulation. The work includes all necessary cutting, shaping, handling, joint treatment, track installation, edge finishing, scaffolding, and cleaning, complete as per manufacturer’s specifications and direction of Engineer-in-Charge |
| 59 | Applying the Texture paint as per the manufacturers specification to the external surface of walls, columns,beams (Asian, Nerolac, Berger, Jotun, Godavari) of approved colour and shade with min. 1.5 to 2 mm Thickness over the External plaster / RCC surface with one coat of primer and minimum two coats of acryllic exterior paint.( Texture + 2 Coats of Apex Paint). Item to include preparing the surface with necessary approved fillers, making good by touch up etc. to give the desired finish as per the approval of the architects and Engineer incharge all complete. Rate to include cost of the tools, tackles, H-frame steel scaffolding, labour. |
| 60 | Providing & fixing Two Track sliding window Yashashri make or equivalent, in heavy sections made out of 104mm x 51 mm x 2.5 mm Upvc multi cavity track section & shutter made out of 45mm x54mm x 2.5mm Upvc multi cavity section welded in corners with Glass beading & EPDM Gasket & 4mm clear glass with lock & rollers. The average weight of Two Track Sliding window (Heavy) is 16.75 kg per sq mtr. These Upvc sections are tested by using BS 2782 & DIN 53459 test methods. |
| 61 | FRP (Fiber Reinforced Polymer) Frames with Wood Finish Manufacture, Supply and Installation (with anchor fastener) of EPEE or equivalent Goan make FRP (Fiber Reinforced Polymer) Frame of cross section as per options below with right angle joint and FRP (Fiber Reinforced Polymer) laminate made from 450 grams per sq.mts (gsm) chop strand glass fiber (matt) and unsaturated polyester resin with viscosity range of 400/450 centipoises per second (cps). The core of frame would be filled with seasoned wood as infill material. The slot of frame for Specified Cross Section : a) 3” x 2” |
| 62 | Wood Finish Wood Core FRP (Fiber Reinforced Polymer) Door Shutter Manufacture, Supply and Installation (including accessories as mentioned below) of EPEE or equivalent Goan make FRP (Fiber Reinforced Polymer) door shutter of specified thickness as per options below by using tray system with seasoned hard wood, moisture less than 17%, wooden styles for Top rail and lock rails. FRP (Fiber Reinforced Polymer) laminate made up of 450 grams per sq.mts (gsm) chop strand matt and unsaturated polyester resin with viscosity range of 400/450 centipoises per second (cps) and printed matt having wooden textures used along with UV Resistant resin to give the clear texture on the door. The core of shutter will be filled with MR 2nd grade Block Board. The Shutter to be water proof as well as mild acid / alkali resistant manufactured using RV TIFAC (R V Engineering College, Bangalore & Technology Information Forecasting & Assessment Council) technology in line with IS 13034 1990 test Standard in an ISO 9001 – 2015 certified factory.Shutter Thickness 35mm ( Accessories: i) S. S. Hinges 4” - 3 Nos ii) S. S. Latch - 1 No iii) Tower Bolt 5” - 2 Nos iv) Handle 5” - 2 Nos) |
| 63 | Providing and laying upto floor five level pre-cast cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggregate 20 mm nominal size) including hoisting and setting in position in cement mortar 1:3 (1cement : 3 Coarse sand) including smooth finishing the exposed surfaces, with cement mortar 1:3 (1 cement: 3 fine sand) including centering and shuttering etc.Moulding in cornices, window sills etc. not exceedings 15 cm girth. |
| 64 | Supply, fabrication, and installation of high-quality FRP mouldings, conforming to IS 14435 and other relevant standards. The FRP mouldings shall be made of durable fiberglass and resin system, with UV resistance, weatherproofing, and chemical resistance. The mouldings shall be fabricated using the hand lay-up method or other approved techniques to ensure strength and durability. The installation includes cleaning the surface, applying approved adhesives, mechanical fasteners, and sealing the joints with suitable sealants to ensure a secure and long-lasting finish. The dimensions, profiles, and finish of the mouldings shall be as per the approved design and drawings. The work also involves proper alignment, leveling, and visual inspection for any defects or imperfections. The contractor shall provide a warranty for the FRP mouldings against defects in materials and workmanship for a minimum period of 5 years. The installation must be in full compliance with Standard Specifications,etc complete. |
| 65 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade, area of slab over 0.50 sqm |
| 66 | Providing 25 mm thick cuddapah slabs machine cut and polished on either side in partitions including making necessary grooves in the wall and fixing with cement mortar, complete as directed by the engineer-in-charge |
| 67 | Signages |
| 68 | Design, Supply and installation of exterior-grade FRP cladding sheets of 2 mm to 3 mm thickness, finished with approved weather-resistant paint, to be applied over structural framework surfaces as per architectural design. The scope includes detailed Kavi Art patterns in columns, frames, and branding zones, fabricated from FRP panels and executed in alignment with artistic references and joinery details provided. Roofing to be finished using high-quality FRP , including complete system. All finishes and detailing shall follow the architectural specifications and are subject to final approval based on shop drawings submitted by the vendor/contractor. (Structural framwork will paid separately).Fiber Reinforced Polymer @ marine quality Composite. It is Reinforced with glass fibre Chopped Strand Mat EMC450, with Area Weight of =/-7.5% as per ISO3374, Moisture Content of <20% as per ISO3344, Size Content of 3.7(1+31%) as per ISO 1887 and Breakage Strength of >140N as per ISO 3342. The resin has Viscosity at 25°C ( P ): 400 to 500, Acid Value (mg KOH/gm): 15-20, SpecificGravity at 25°C: :1.11‡0.02, Volatile content (%): 38 +/-3, Gel time at 30°C (minutes), (with Resin = 100 grams; Accelerator 3% Cobalt Octoate = 1.0 and Catalyst MEKP M-50= 1.5 ml):8 to 12. Cured clear Cast Resins comes with following properties: Barcol hardness: 42, : 42 Heat deflection temperature (°C): 94, Tensile strength (kg/cm2): 600, Tensile modulus Map of 3100; Elongation at break: 2.5%; Flexural strength (kg/cm2): 1050, Flexural modulus (Mpa) of 3200, Water absorption @25°C (mg) (after 24hours) of 20. The method-of-testing and the tolerances are as prescribed in IS-6746-1994. The Contractor shall obtain approval from the Architect for all designs prior to the execution of the work. |
| 69 | Supply, fabrication, and installation of high-quality FRP (Fiber Reinforced Polymer) Signages mounted on a robust support structure of Hot Dip Galvanised (HDG) MMaterial: Fiber Reinforced Polymer (FRP) – UV stabilized, weatherproof, and corrosion-resistant. Thickness: Minimum 3mm to 5mm on size Board Size 700 mmx 700 mm and Post Height 1800 mm or as per design Drawings . Finish: Smooth, glossy/matte finish with high-grade automotive paint or vinyl graphics. Colors: As per approved design; fade-resistant outdoor-grade colors.Graphics: High-resolution digital printing/reflective vinyl ., laminated for scratch resistance.S Pipes, complete with integrated energy-efficient LED lighting for day-night visibility.Signage Panel:Support Structure: Material: Mild Steel Pipes, ISI marked.Surface Treatment: Hot Dip Galvanised (min. 80 microns coating) for long-term corrosion protection.Size: Minimum 65mm to 100mm diameter pipes or as per structural design.Installation: Proper RCC foundation with anchor bolts, grouting, and alignment for stability.Illumination: Type: LED Strip Lights/Module Lights (Weatherproof IP65 rated).Power Source: 230V AC with concealed wiring inside the pipes.Light Color: Cool White / Warm White / RGB (as per requirement). Energy Efficient: Low power consumption, long lifespan (minimum 50,000 hours).Auto On/Off: With Photoelectric Sensor .. General Features:Weatherproof and vandal-resistant. Suitable for outdoor installation in public areas.Branding/logo customization as per client’s requirement.All accessories, hardware, fasteners of stainless steel (SS 304 grade) |
| 70 | Providing and fixing of signage made from machine-cut natural red sandstone of approved quality, colour, and texture, having a minimum thickness of 100mm, including surface preparation for lettering as per approved architectural drawings. The sandstone shall be free from cracks, defects, and discoloration, with the front face honed or polished to achieve a smooth finish, and all edges neatly chamfered or dressed. Instead of engraving, the signage shall be fixed with laser-cut acrylic letters of approved colour and font, matching the design intent. The acrylic letters shall be a minimum of 3mm to 5mm thick, fabricated from UV-stabilized, weather-resistant material and fixed to the polished sandstone surface using high-strength exterior-grade adhesive (such as 3M VHB tape or equivalent adhesive recommended by the manufacturer), ensuring firm bonding and a clean, permanent appearance. The sandstone signage shall be provided with pre-drilled holes of suitable diameter (minimum 12–16mm) to accommodate stainless steel dowels (grade SS 304 or higher) for fixing securely onto the RCC or masonry foundation. Fixing shall be carried out using approved epoxy or cement-based grouts/adhesives, ensuring proper alignment, level, and plumb. The rate shall include cost of all materials, labour, tools, transportation, handling, polishing, edge finishing, surface preparation, acrylic letters, adhesives, provision of holes, dowels, fixing to foundation, cleaning, curing, and all incidental works required to complete the item in all respects as per the direction of the Engineer-in-Charge. (Size: 1000mm length x 2100mm height) |
| 71 | Providing and fixing of signage made from machine-cut natural red sandstone of approved quality, colour, and texture, having a minimum thickness of 100mm, including surface preparation for Map as per approved architectural drawings. The sandstone shall be free from cracks, defects, and discoloration, with the front face honed or polished to achieve a smooth finish, and all edges neatly chamfered or dressed. Instead of engraving, the signage shall be fixed with laser-cut acrylic Map of approved colour and font, matching the design intent. The acrylic Map shall be a minimum of 3mm to 5mm thick, fabricated from UV-stabilized, weather-resistant material and fixed to the polished sandstone surface using high-strength exterior-grade adhesive (such as 3M VHB tape or equivalent adhesive recommended by the manufacturer), ensuring firm bonding and a clean, permanent appearance. The sandstone signage shall be provided with pre-drilled holes of suitable diameter (minimum 12–16mm) to accommodate stainless steel dowels (grade SS 304 or higher) for fixing securely onto the RCC or masonry foundation. Fixing shall be carried out using approved epoxy or cement-based grouts/adhesives, ensuring proper alignment, level, and plumb. The rate shall include cost of all materials, labour, tools, transportation, handling, polishing, edge finishing, surface preparation, acrylic Map, adhesives, provision of holes, dowels, fixing to foundation, cleaning, curing, and all incidental works required to complete the item in all respects as per the direction of the Engineer-in-Charge. (Size: 1000mm length x 2000mm height) |
| 72 | Providing and fixing of signage made from machine-cut natural red sandstone of approved quality, colour, and texture, having a minimum thickness of 100mm, including surface preparation for lettering as per approved architectural drawings. The sandstone shall be free from cracks, defects, and discoloration, with the front face honed or polished to achieve a smooth finish, and all edges neatly chamfered or dressed. Instead of engraving, the signage shall be fixed with laser-cut acrylic letters of approved colour and font, matching the design intent. The acrylic letters shall be a minimum of 3mm to 5mm thick, fabricated from UV-stabilized, weather-resistant material and fixed to the polished sandstone surface using high-strength exterior-grade adhesive (such as 3M VHB tape or equivalent adhesive recommended by the manufacturer), ensuring firm bonding and a clean, permanent appearance. The sandstone signage shall be provided with pre-drilled holes of suitable diameter (minimum 12–16mm) to accommodate stainless steel dowels (grade SS 304 or higher) for fixing securely onto the RCC or masonry foundation. Fixing shall be carried out using approved epoxy or cement-based grouts/adhesives, ensuring proper alignment, level, and plumb. The rate shall include cost of all materials, labour, tools, transportation, handling, polishing, edge finishing, surface preparation, acrylic letters, adhesives, provision of holes, dowels, fixing to foundation, cleaning, curing, and all incidental works required to complete the item in all respects as per the direction of the Engineer-in-Charge.( SIZE 900 MM LENGTH X 900 MM HEIGHT) |
| 73 | Audio |
| 74 | SITC of Two-Way Line Array Column with Asymmetrical Vertical Cove and should comes with minimum four or more 130mm (5 in) or better LF drivers; Sixteen ormore 25 mm (1 in) HF drivers; Frequency Range (-10 db): 45Hz–20kHz or better; Coverage: 150 Degree Horizontal x 45 Degree Vertical or better; Sensitivity (@1m): 98dB or better; Nominal Impedance: 4 ohms / 8 Ohms or better; Power Capacity (pk) 4000W or more; Max SPL (pk) 131dB or better; etc.Approved Make: JBL / Fohn Audio / L-acoustic / d&b audiotechnik / Renkus Heinz |
| 75 | SITC of 2‐Way Loudspeaker, Shall have Frequency Range((±3 dB): 63 Hz - 19 kHz or better, Coverage Pattern: 120° x 60° or better, System Sensitivity (dB-SPL, 1W @ 1m)-92 dB or better, Maximum SPL: 113 dB or better, Nominal Impedance: 8 Ohms, Power Handling (Programme): 500W or better; Enclosure: exterior grade multi-ply hardwood plywood. The OEM mounting bracket and accessories for the loudspeaker should be included.Approved Make: JBL / Outline / L-acoustic / d&b audiotechnik |
| 76 | SITC of Four Channel Digital Power Amplifier having Rated Power Output (per channel @ 4 ohms): 600 W or better; Each output channel should be capable of providing either 70V or 100V for high impedance applications; Analog Input Signal to Noise Ratio: > 104dB or better; Total Harmonic Distortion: up to 0.35% or less; Damping Factor: > 1000 or better; Frequency Response (8Ω, 20Hz - 20kHz): +/-0.25dB or better; Crosstalk: > 80dB or better; Voltage Gain: 34dB or better; Should have On-board Digital Signal Processor; Should be controllable, configurable and monitorabe through standard TCP/IQ network; Completely configure the amplifier using an intuitive front-panel interface; Should have GPIO/AUX Port to Recall presets.Approved make: Crown / RAM Audio / Labgrupen |
| 77 | SITC of Two-channel, 600W @ 4Ω Analog Power Amplifier, 70V/100V, 600 W x 2 channels at 4 and 8 ohms/100V/70V or better, Voltage Gain :34dB; Frequency Response (8Ω 20Hz - 20 kHz): ±0.5dB; Signal-to-Noise Ratio Analog Input : > 104dB; Damping Factor: > 1000; Sensitivity (for full rated power at 8 ohms): 0.7V RMS; Crosstalk: >80dB; Should have 3 nos. of RJ45 port 1 for data and 2 for Digital audio transmission in redundancy concept, Should have Integrated 8 band EQ , Limiter , Crossover and Delay.Approved make: Crown / RAM Audio / Labgrupen |
| 78 | SITC of 4x4 Digital Signal Processor, DSP with 4 inputs and 4 outputs, 12 Control Inputs and 6 Logic Outputs for GPIO Integration, 48V phantom power on all analog inputs, THD: <0.01% 20Hz to 20KHz, Crosstalk: <-75dB, Open architecture software configurable, Logic processing power, Should have speech sense engine, Digital Audio Bus to transfer digital audio to Amp and other devices, 2 digital audio bus RJ 45 Port, 1 Ethernet port for Monitoring and configuration, Capable to handle +5V unloaded logic output voltage, Capable to control 3rd party devices with TCP IP and RS 232, Should have 1nos of RS 232 port for integration with control System, Should have Bi-Directional Locate Functionality, Should have 48 or more digital audio Channel Bus, Should have monitoring LED for COM, STAT, ERR and PWR.Approved Make: BSS / bi-amp /Symetrix |
| 79 | SITC of Small-format Minimum 12 or more audio channel Analog Mixing Console with USB I/O and Digital Effects; Easily record, edit and playback from your Mac and PC with an integrated USB audio interface—simply plug-and-play with your Mac; should support digital signal processing including reverb, echo and delay; Should support Ducking feature to allow audience to hears you loud and clear by automatically lowering background music when any announcement will comes with priority; etc. Approved Make: Soundcraft / Digico / Allen-heath |
| 80 | Electrical |
| 81 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface steel conduit( medium) with modular switch, modular plates, suitable size modular GI box of specified Category and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.(c) Group C -- with Cat A Modular Accessories |
| 82 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent surface PVC conduit ( medium)of appropriate size as required.(b) 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earthwire (20mm Conduit) |
| 83 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent surface PVC conduit ( medium)of appropriate size as required.(c) 2 x 4 sq.mm + 1 x 4 sq.mm earthwire (20mm Conduit) |
| 84 | Supply of 3 core unarmoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. |
| 85 | Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.3 1/2 Core 25 sq.mm |
| 86 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm on surface, etc. complete as required |
| 87 | Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required (a) Cat A |
| 88 | Supplying and fixing following way SPN sheet steel MCB distribution board 240 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required (but without MCB/RCCB/Isolator)a) 4 way single door Cat A |
| 89 | Supplying and fixing following way TPN sheet steel, double door, Verticle type MCB distribution board 415 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator)interconnection between incomer MCB and busbars of following ways (but without MCBs as required) |
| 90 | Supplying and fixing 63 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required.(e) TPN, Cat A |
| 91 | Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. (d) TP, Cat A |
| 92 | Supplying and fixing B series SP MCB, 240 V, suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required\\"(a) 5 A to 32 A, Cat A |
| 93 | Supplying and fixing B series SP MCB, 240 V, suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required\\"(b) 40 A, Cat A |
| 94 | Supplying and fixing following rating double pole (single pole and neutral) 240 V RCCB having a sensitivity current upto 300mA in the existing MCB DB complete with connections testing and commissioning etc as required.(b) 40 A, Cat A |
| 95 | Supplying and fixing 0.5 A to 5 A rating, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required\\"(a) SP, Cat A |
| 96 | Supplying and fixing 0.5 A to 5 A rating, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required\\"(c) DP, Cat A |
| 97 | Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required..(a) SP, Cat A |
| 98 | Supplying and fixing suitable size modular GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 15/16 A and 5/6 A modular socket outlet modular socket outlet and 15/16 A modular switch connection painting etc. as required.(a) Cat A |
| 99 | Supply and erecting of 48 inch (1200mm sweep) ceiling fan, double ball bearing type, , complete with all accessories.(a) Cat A |
| 100 | Supply and erecting of 9 inch (225 mm sweep) exhaust fan with double ball bearings, 1400 rpm, complete with all accessories.(a) Cat A |
| 101 | Supply and installation of surface mounted, LED type ceiling luminaire complee with all acceessories including LED lamp.(a) Cat A |
| 102 | Supplying of centrifugal pump of following capacity at the site of work including loading unloading excluding taxes, freight, loading & etc. complete.Three Phase Monoblock Pump Sets of SYNC speed as 3000 RPM of 1.02HP |
| 103 | Supplying of centrifugal pump of following capacity at the site of work including loading unloading excluding taxes, freight, loading & etc. complete.Three Phase Monoblock Pump Sets of SYNC speed as 3000 RPM of 5.0 HP |
| 104 | Supplying at store or site of work including railway freight, carting, loading, unloading, stacking etc. Cast Iron double flanged single door swing non-return valve generally conforming to IS:5312 part-I, having body, door, cover in graded cast iron to IS:210 Gr. FG 260 and door in CS ASTM A216Gr. WCB for 350mm & above body Ring in leaded tin bronze IS 318 GR LTB2 and door ring in natural rubber & bearing block of leaded tin bronze to IS:318 Gr. LTB 2 ( 350 mm & above ), hinge pin of stainless steel AISI 410, Flanges drilled to IS:1538 Table 4 & 6 TYPE P.N. 1.0 (Class A) (50mm Dia) |
| 105 | Supply at store or site of work including railway freight, carting, loading, unloading, stacking etc.PVC ball valves in PN 16 rating with one end compression using Blue colour compression nut in polypropylene material 7 other end with female threads confirming to ISO:4422-4 Diameter -Main pipe outer 32 diameter in mm & tapping size in 1inches |
| 106 | Supply at store or site of work including railway freight, carting, loading, unloading, stacking etc.PVC ball valves in PN 16 rating with one end compression using Blue colour compression nut in polypropylene material 7 other end with female threads confirming to ISO:4422-4 Diameter -Main pipe outer 50 diameter in mm & tapping size in 1/2 inches |
| 107 | Earthing with GI earth pipe 2 mts long 40 mm dia medium class with ISI mark,of approved brands, including accessories and providing masonry enclosure with CI/RCC cover having locking /lifting arrangement and watering pipe etc. with charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x 2.0 mtrs(min) and disposal of excavated soil. b) Class B GI pipe, 40mm diameter as per specifications. c) Charcoal/salt as per specs ( paid seperately). d) Refilling the pit of size 1.0x1.0x 2.0 mtrs(min) with soft black soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. Aluminium tag with embossed earthing value to be attached to the pipe. g)watering arrangement(plumbing will be paid seperately).(b) In rocky strata |
| 108 | Supplying and drawing of b)(b) Cat 6 + UTP, 4 pair annealed tinned copper conductor PVC insulated, PVC sheathed, unarmoured data cable in existing surface/recessed steel/PVC conduit of appropriate size including connection, etc. complete as required |
| 109 | Supplying, installation and testing of suitable size modular GI box , modular plate and cover complete with RJ-45 connector(modular LAN socket TX1000/ CAT6) including concealed metal box/surface GI/PVC Box, modular plate, punching, identifying, complete as required. |
| 110 | SITC of Fixed Dome Camera (2.8mm) H.265+/H.265/H.264+/H.264/MJPEG Color: 0.005 lux @(F1.6, AGC ON), 0 lux with IR 25fps/30fps(1920×1080), VCA functions, 3 streams 3D DNR, BLC,ICR, EXIR, DC12V&PoE Built-in micro SD/SDHC/SDXC slot HIK-Connect cloud service-S:Alarm:1/1 ,Audio:1/1,onvif support,-U:without build in mic |
| 111 | Supply , Installation , Testing and Commissioning of 4 Channel NVR with 4 SATA, HDMI 1 Port and VGA 1 Port, Audio 1-ch and Alarm 16/4 Port, Recording Resolution upto 8MP, Support 4 SATA each upto 1TB, |
| 112 | Supply Installation Testing and Comissioning of 32'' Commercial Television with wall mount accessories. The CCTV monitors shall be the perfect professional security monitor with Full HD a native 1920x1080 panel resolution optimized for CCTV applications and designed for 24/7 use. Benefiting from the latest onboard LED panel technology that offers excellent picture quality along with a fast 8ms response time. Shall offer 600TV lines high resolution and various video output via HDMI, VGA. Built-in Speaker, Accessories : Wall Mount stand. |
| 113 | Supply , Installation , Testing and commissioning of HDD, 1TB, 7200 RPM, SATA 6 Gb/s, including fixing accessories and cable termination with required, complete in all respect as per instruction of engineer in-charge. Make:WD |
| 114 | Supplying, fixing, and configuring 8 ports + POE switch console port for management on provided rack. |
| 115 | Supplying and fixing 2U wall mount rack. |
| 116 | Supply, installation, testing and commissioning of VRF/VRV based 0.9 to 1 Tonne Hi-wall type room/indoor unit (IDU) of nominal Given cooling capacity having EER as per BEE standards and specifications with multiple speed evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, in built drain pump, expansion device, cordless remote control with necessary controls and electrical terminal to receive power supply, etc. IDU shall have anti-corrosive coating suitable for coastal area. Unit shall be of decorative slim dimension suitableindoor wall mounting. The indoor unit shall also have an electronic control console. The unit shall be suitable for wall mounting and provided with suitable mounting brackets with any additional refrigerant and oil charge as per requirement during installation complete. |
| 117 | Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 41.3mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete.6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation |
| 118 | Supply, installation, testing, and commissioning of 5W submersible LED underwater lights suitable for swimming pools, fountains, and water features. Each fixture shall be of recessed type, constructed with a stainless steel 304 front bezel and provided with a PVC installation sleeve for embedding into concrete or pool surfaces. The fixture shall have a faceplate diameter of 75 mm, cut-out diameter of 57 mm, depth of 75 mm, with sleeve depth of 92 mm and sleeve diameter of 64 mm, and an aperture opening of 45 mm. The light shall operate on 12V/24V DC with an external driver/transformer, and shall have a tempered glass lens, polished stainless steel finish, and black housing.The luminaire shall be IP68 rated for complete waterproofing, suitable for continuous submersion, and designed to provide a narrow beam spotlight effect for underwater highlighting. The scope shall include supply of fixtures with all accessories, wiring connections, fixing arrangements, and making the installation complete in all respects, as directed by the Engineer-in-Charge. |
| 119 | Supply and laying of HDPE/DWC pipe (PE10/PN10 GRADE) from the street light pole foundation to the nearest cable pulling chamber to facilitate pulling of cable at later stage. Rate shall be including cost of all accessories i.e. bends, reducers, of approved make, necessary excavation, backfilling, cushioning, brick protection etc complete as required and directly buried 50mm below earth. |
| 120 | Supplying and Installation of 205(L)x255(W)x112(D)mm Junction Connector boxes IP-66/67/69 weather proof for outdoor type (Make : Hensel ) |
| 121 | Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. |
| 122 | Supplying and fixing D series FP MCB, 415 V suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required\\"(b) 80 A, Cat A |
| 123 | Supplying and fixing C series DP RCCB, 240 V, 100mA suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required\\"(b) 63 A, Cat A |
| 124 | Supplying and fixing 6 A to 32 A, D series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required..(a) SP, Cat A |
| 125 | Supplying and fixing D series FP MCB, 415 V suitable for lighting and other loads of following poles in the enclosure with connections testing and commissioning etc as required\\"(b) 80 A, Cat A |
| 126 | Digital Projection |
| 127 | Supply, installation, testing and commissioning of of 3 Chip DLP/LCD Laser projector ( Make Christie/Epson/Sony). Specifications: Projector Technology: 3-Chip DLP/LCD Technology or better Light Source: Laser Diode Brightness: 16000 Lumens, Resolution: WUXGA or better with 4K Enhancement, Aspect Ratio: 16:10, Contrast Ratio ≥ 2,00,000:1 or better Color Processing: 10 bit or better Refresh Rate: 192Hz-240Hz Power Consumption: <1.5 KW or better Lamp life: ≥ 20,000 Hours or better Weight: < 30Kg Should be supplied with appropriate lens Optional Camera Allignment: Integrated camera to allow easy projector stacking assist function, tiling assist for edge blends, color calibration and screen matching for quick on site OEM should have registered local service centre in region and should provide onsite warranty services in A,B,C& D class cities. |
| 128 | Supply installation, testing and commissiong of outdoor enclosure ( Make Tempest/AED/PIXOMATE ) shall be suitable for permanent installation of large format video projectors/laser in any climate, for video mapping, out - door attractions, advertising and outdoor movies. Enclosures shall be fitted with all the new features including the followings: • Lightweight aluminum construction • Powerful AC fan• Local TCP/IP or web-based monitoring service via RDM • Enclosure shall consist of inlet filters and shall block pollutants from getting near the projector/laser. • Enclosures shall be designed to protect the projector/laser from damaging elements such as dust, smoke, heat, cold, water and moisture. • The enclouser should have adjustable stand to match the alligment onsite as per requirment along with Supply of Poles for mounting Enclosures. Fixing the poles, confirmation of size and height to be decided will be in customer scope - fabricated out of standard BIS certified galvanised poles/pipes/square pipes with suitable base plate, clamps, Power coated and other accessories complete in all respect. |
| 129 | Supplying, Installation , Testing and commissioning of 3D Projection mapping software ( make Dataton/ 7th Sense/ Vioso) , Playback of control System to manage, schedule and control the media severs. It should have direct control on inputs and multiple media timelines. It should be able to control sound, Lights, laser, projector and other requirements compatible with 512 DMX output channel on USB DMX interface as per site requirment including lifetime license validity. |
| 130 | Supplying, Installation , Testing and commissioning of Rack mounted show control computer ( Make Dell/HP/EDS ) of complete with in-built hardware interfaces for time synchronization and DMX control Windows 10 operating system and Artist show control software duly programmed as per existing cue of sound and light as per following details:It shall comprise on Intel Core i7 Series Processor or above with following minimum specifications: 2.9 GHZ Memory speed processor (Intel/AMD), 32 GB RAM system memory, 20 MB Cache, 2 TB HDD storage, Hard Disk Controller, Dedicated 8 GB Graphic card (NVIDIA/AMD), 27\\" LED TFT Monitor, USB 3.0 interface with 4 USB ports, wired Key board and mouse support up to 40 mtrs. , with Window 10 IOT operating system, 10 Gbps LAN port, HDMI port. |
| 131 | Supplying, Installation , Testing and commissioning of rack mounted media control server ( Make Dataton/ EDS/ Vioso) should be Server & associated software license and hardware with accessories with built-in hardware for 2D, 3D mapping, animation as per following details:- The server should have 4 nos of DP/HDMI outputs with each channel supporting 4K, Server grade hardware component built for 24/7 use, with 1/10 GBPS ethernet port with 4 USB 3.0 ports, supports genlock, geometry correction, edge blending, color correction and 3D mapping. The server should have low noise cooling system and should support capture from NDI and capture cards with low latency.The server should consist of only industrial grade components and Kensington security slot.The OS for the server should be Windows 10 with built-in, should follow with following minimum specifications. 4096X2160 Resolution @60hz max, min. 16 GB RAM system memory, Minimum 1.9TB Enterprise level NVMe SSD for storage, Dedicated 16GB or better GPU.The above System shall be fully loaded with software package & valid license as required. The system should be OEM certifed. The media system should be from sames OEM as the projection mapping software. |
| 132 | Supplying, Installation , Testing and commissioning of OFC/CAT6 based Video Transmitter and Receiver ( Make AV Master/Kramer/RGBlink) Set Specification: Input: 1x Type A HDMI 2.0, RX SFP Fiber: 2×LC ; Output: TX HDMI Loop: 1 × HDMI Type A ; 1x Type A HDMI 2.0, RX SFP Fiber: 2×LC ; Communication: TX RS 232: 1×3.81mm Phoenix Jack IR IN/OUT: 2×3.5mm Stereo Jack ; RX RS 232: 1×3.81mm Phoenix Jack ; IR IN/OUT: 2× 3.5mm Stereo Jack; Max Data Rate 18 Gbps, Resolution Range Up to 3840x2160 @60Hz Color Space: 4:4:4 ; Color Depth: 8/10/12-bit (1080P60Hz); 8-bit (4K60Hz)Audio Format: LPCM2/5.1/7.1CH, Dolby Digital/Plus/EX, Dolby True HD, DTS, DTS-EX,DTS-96/24, DTS High Res, DTS-HD Master Audio, DSD |
| 133 | Supplying, Installation , Testing and commissioning of Small Business 24 * GE TX + 4 * 10GE/GE SFP+. The switching capacity shall be of 128 Gbps and ensures benefit from increased bandwidth and throughput to move packets through the switch faster and more efficiency.( Make DBC/Juniper/ Netgear) Specifications: 256MB RAM, 16MB Flash; 128 Gbps Switching Capacity ; 256 Mbps Forwarding Capacity ; 802.3/3u/ab/z/x/af Network Standards ; Fanless, Rack-Mountable Design ; Jumbo Frame: 9KStandards:-IEEE 802.3, 802.3u, 802.3x, 802.3ab. Cabling Type:-Category 6 and multi-mode fiber. Power:-100-127VAC/200-240VAC, Operating Temperature:-32 to 104ºF (0 to 40ºC). |
| 134 | Supply installation, testing and commissiong of Rack – 19 “ Rack, 600 mm wide frame and 1000 mm depth,( Make WQ India/Rittal/DLINK or equivalent ) top bottom side panel and rear door of CRCA Sheet, front door with Aluminum section and acrylic/glass sheets, with minimum specifications as per site requirement. |
| 135 | CAT 6 Twisted Pair cable ( Make Systemax/ D'Link/ Molex ) for signal & data transmission. 24 AWG twisted pair conductors inside an overall braid and foil shield. Shielded Twisted Pair cable should provides added protection from outside interference and ensures high quality signal transmission with RJ 4 connectors etc. |
| 136 | Supply, Installation, testing and commissioing of cable and connectors like Fiber optic cables, FO termination panels, Media converters, Video cables and adaptors and any other accessories required as oer site completion. |
| 137 | Supply, installation, testing and commissioning of 15\\" Outdoor speakers (Make JBL / Biamp/Martin) Audio Coverage Pattern;90° x 90°; System Power Rating;500 W (2000 W peak), Sensitivity (2.83V @ 1m);98 dB (Ave. 80 Hz – 20 kHz); Maximum SPL (1m);Direct 8Ω: 125 dB (peaks of 131 dB) 300 W Tap: 123 dB (peaks of 129 dB); Crossover Network;1.5 kHz, 4th order (24 dB/oct) high-pass plus conjugate to HF, 2nd order low-pass to LF; Nominal Impedance;8 ohms; Transformer Taps;70V: 300W, 150W, 75W, 38W 100V: 300W, 150W, 75W; LF Driver;Kevlar-reinforced cone with weather treatment, 75 mm (3 in) voice coil.; HF Driver;2408H-2 38 mm (1.5 in) diaphragm and voice coil diameter, patented high-temperature annular polymer diaphragm, copper-clad aluminum coil, fluid-cooled.; Enclosure;ABS with Glass enclosure, heavily braced; Grille;Corrosion-resistant zinc-rich extra-thick powder coated steel grille Environmental;IP56 per IEC529, with a minimum 5° downward aiming angle. Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV, and ASTM G85 for acid-air/salt-spray (336 hrs).;Dimensions;486 x 486 x 479 mm (19.1 x 19.1 x 18.8), cabinet 507 mm (19.9 in) depth with gland nut 546 mm (21.5 in) including bracket extending to back; Colors;Available in gray (similar to Pantone 420C) and black (-BK); Included Accessories;U-bracket, matches loudspeaker color (gray or black), zinc-rich extrathick powder coated, steel.; Crossover Modes;Passive; Nominal LF Driver Impedance;8 ohms; Suspension Attachment;Two M10 (fine-thread) points for included U-bracket. M6 secondary safety attachment point on back panel.; Net Weight (each);20.6 kgs. (45.5 lbs.) x 8 nos.Two-channel, 1200W @ 4Ω Power Amplifier ( Make Crown / Biamp/Martin Audio or equivalent) x 3 nos. 6 Channel Analogue Audio Mixer with 2x2 USB and 2 Mic Input ( Make Mackie / Biamp/Martin Audio or equivalent)x 1no. Active Speaker Management system 2x6 with AFS and EQ (Make dbx/Mackie/martin Audio)x 1 no. |
| 138 | SITC of high quality long throw multicolor Washlight ( Make LEXSA/Martin/Elation or ETC) , Protection Rating:IP66, Power & DMX loop-in/loop- out cables for easy connections.Additional wall mounty oke arrangements for fixing the lights.Power:150W,CCT:RGBW,Beam Angle 25º/45º, Body:Pressure Die Cast Aluminum/Extruded Aluminum.BodyColor:Telegrey. Power Input: DC 24V (without DC Driver) |
| 139 | Supply, installation, testing and Commissioning of 8 Channel 512 DMX Splitter ( Make Martin/Liteputter/LEKSA or ETC )DMX isolator or splitter provides Isolated optical DMX splitter provides 8outputs from a 1 input and Input voltage: AC110 to 220V, 50Hz, Product features:Group 1 & group 8 DMX signal change. |
| 140 | SITC of GI poles for fixing the high power LED façade wash/spotlights with the height 5 Meter as per sign/Site condition along with necessary clamping arrangements as per the Site Condition |
| 141 | SITC of DC power driver ( Make Meanwell or equivalent ) for the above Lights, Power:200W, Input :AC 110-240 VAC, 50Hz, Output :DC 12/24V, Protection rating, IP67, Surge protection : LL 4KV, LE 6KV |
| 142 | SITC of 5 core DMX cable (Make LEXSA/Martin/Elation or equivalent) comprises twisted pairs with shield support for carrying of data. DMX512 cable isused for connecting all light consoles that use DMX512 standard data transmission. |
| 143 | SITC of PVC insulated multi-core electrical unarmoured flexible 3C x 1.5 Sqmm and 2.5 Sqmm power cable (Make POLYCAB/HAVELS/RR CABLE or equivalent) having less electrical losses. This PVC insulated and round sheathed wire features a bright multistrands copper conductors and it supports voltage grade upto 1100V. (Asper actuals depending upon the site condition) |
| 144 | SITC of PVC insulated multicore electrical armored flexible 4C x 2.5 Sqmm power cable (Make POLYCAB/HAVELS/RR CABLE or equivalent) having less electrical losses. This PVC insulated and round sheathed wire features a bright multistrands aluminium conductors and it supports voltage grade upto 1100V. (As per actuals depending upon the site condition) |
| 145 | SITC of IP65 \\"I\\" power connectors (Make Any Indegenous or custom) having 3/4 pole cable connector, chuck type strain relief, Current rating 20 A rms continuous, Easy and extremely precise locking system \\"Quick Lock\\" High impact materials - long-lasting and reliable |
| 146 | SITC of IP65 \\"I\\" DMX connectors (Make Any Indegenous or custom) having 3/5 pole cable connector, Male/Female connector with improved latch, cage type contacts, \\"solder stop\\" for easy soldering, and additional ground contact for best contact integrity between chassis and cable connector. More durable housing for maximum reliability. |
| 147 | SITC of 5 pin XLR Female connectors (Make Any Indegenous or custom) having 5 pole cable connector, Male/Female connector with improved latch, cage type contacts, \\"solder stop \\"for easy soldering, and additional ground contact for best contact integrity between chassis and cable connector. More durable housing for maximum reliability. |
| 148 | SITC of Power Distribution Board (Make Any Indegenous or custom) made up of MS Sheet metal fabricated housing black powder coated and ivery connectors for the internal terminations and external outgoing connecting points, fibre/brass glands of suitable size fitted MCB control for outgoing circuits.-12 Nos of 6/10A SP Outgoing MCB's.-1 No of 32A TPN Incoming MCB. |
| 149 | SITC of IP driver box made up of PVC/UPVC and ivory connectors (Make Any Indegenous or custom) for the internal terminations and external outgoing connecting points, fiber/brass glands of suitable size fitted MCB control for outgoing circuits. |
| 150 | SITC of Din Rail Mount DMX controller (Make Any Indegenous or custom)can be used to control a wide variety of different DMX systems-from RGB / RGBW to more advanced moving and color mixing luminaires, 512 DMX channels in live mode (computer), stand alone mode with 1 area and 20 scenes, MacOSx10.6/10.7/10.8-Windows XP/ VISTA/ SEVEN/832/64bits and USB2.0, XLR3, mini USB, Power From 5V to 5.5 VDC (AC/DC adapter in option. |
| 151 | SITC of additional accessories (Make Any Indegenous or custom) for installing the lights as per the final drawing/ site condition consisting of clamps, brackets, angles, conduits, joints, hardware's like fasteners, nut & bolts etc., |
| 152 | Show Control Software ( Make: VIOSO/DATATON/ControlBuddy ) - Advance import and merging capabilties; - templets and presets for qucik set up ; custom user graphic Support ; - Import of user preferences- action sequence programming ; - main and back up operation of media server; - time to next que indicator ; - go to named que functionality- job will and timeline information ; - automated infomration pickup from media server ; - Scheduling features ; - tablet over wifi control- hadware dongle licenses ; - multi-version show back-up |
| 153 | Providing Apple IPAD as per Sepecfication requirement for Handling as per Engineer-in Charge |
| 154 | Murals , M S Structure For Mural Instalation For SIZE: 20 × 6 Meters MATERIAL: FRP With Polishing and dust proof |
| 155 | AV CONTENT & INTENT: 12-15 Min of A introductory AV about Parshuram and on the how the region is linked to the his legacy. Audio Visual Content: includes research, visual Storyboard, Storytelling, 2D 3D animation, Graphics, Art Works, Archival Imagery, Video-timeline, SFx, VFx, etc for the projection mapping. Approx Time 12-15 Mins. Art Work: includes design and development of pictures, digital illustration, sketch, characters, etc for the show. The Artwork should be created by professional Artist and Illustrator.Creative Direction, Design and Programming: Designing of projection visual schemes according to concept, characters, events, mood, drama etc and creating timeline sync with the video storyboard.• Sanskrit Shloka with static image to be played before all the laguages.• Explanation of sanskrit shlokas in Hindi Language.• Explanation of sanskrit shlokas in English Language.• Explanation of sanskrit shlokas in Marathi/Konkani Language. |
| 156 | Services: Installation and Commissioning of the complete system including projectors, media server and other accessories.• Installation of Projectors in projection frames• Installation of Projection frames as per our plan.• Installation of Power and AV cables to the projector.• Installation of Network Racks and accessories.• Installation of Projection Mapping Devices in the rack.• Installation of the Show Control Sequencer Device.• Interconnection of the HDMI cables with Projectors and Mapping Devices.• Installation of Networking Equipment’s in the Networking rack.• Cable laying of CATX and Fiber Optic.• Splicing of the Fiber Optic cables and Crimping of CATX cables.• Keystone correction of projection channels.• Geometric Correction of Projection image. • Edge Blending and warping of the projection channels.• Integration of the hardware devices• Installation of the equipment rack• Installation of the devices in the equipment rack• Installation of all GI Poles and fixtures.• Installation of cables and connectors.• Calibration of the sound system• Installation of the drivers into the projection mapping software.• Detailed mapping of the content on surface.• Loading & optimization of Content.• Mapping of the POV on different zones • Masking of the areas which are outside the mapping zones.• To maintain integrity of shapes on uneven topography.• Overall Projectors mapping• DMX Control and setup• Show control setup.• Layout designadditional accessories for installing the lights as per the final drawing / site condition consisting of clamps, brackets, angles, conduits, joints, hardware's like fasteners, nut & bolts etc. |
| 157 | SITC & Design of 30 KVA Online 3-phase UPS with complete elctrical work between UPS and projectors |
| 158 | SITC & design OF M S Structure with sheets to make screen including Civil work for the Support of FRP Wall Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
| 5 | Click here to download tender document | Tender Documents |
| 6 | Click here to download tender document | Tender Documents |
| 7 | Click here to download tender document | Tender Documents |
| 8 | Click here to download tender document | Tender Documents |
| 9 | Click here to download tender document | Tender Documents |
| 10 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
