|
| 1 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed. |
| 2 | M&L for Brick work with fly ash bricks straight or curved on plan exc 6 m mean radius, built in cement mortar (1:6) complete all as specified and directed. |
| 3 | M&L for brick work using fly ash bricks straight or curved on plan to any radius in half brick thick wall, built in cement mortar (1:4) complete all as specified and directed. |
| 4 | M&L for PCC (1:2:4) type B-0, (using 12.5mm graded stone agregate) as in bands, bed blocks, fixing hold fasts, filling of door fames etc complete including necessary formwork complete all as specified and directed. |
| 5 | M&L for rendering 15 mm thick in cement mortar (1:6) on fair faces of brick work, finished even and smooth without using extra cement after taking down old cement plaster complete all as specified and directed by Engineer-in-Charge. |
| 6 | M&L for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work, finished fair and even and smooth without using extra cement after taking down old cement plaster complete all as specified and directed by Engineer-in-Charge. |
| 7 | M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper (premium quality) over one coat of alkali resistant primer paint over a layer of smooth wall putty finish punning 2 mm thick strictly as per manufacturer instruction with smooth roller finish complete all as specified and directed by GE.(Note:- (i) After painting works, cleaning of all floors, glass and furniture by own arrangement.(ii) Original purchase voucher of the item shall be submitted by the contractor to Engineer-in-Charge before taking any payment.) |
| 8 | M&L for preparation of newly plastered surface of wall and applying two coats of exterior emulsion paint (Apex ultima) over one coat of alkali resisitant primer paint over a layer of smooth wall putty finish punning 2 mm thick strictly as per manufacturer instruction complete all as specified and directed by GE.(Note:- (i) After painting works, cleaning of all floors, glass and furniture by own arrangement.(ii) Original purchase voucher of the item shall be submitted by the contractor to Engineer-in-Charge before taking any payment.) |
| 9 | S&F for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be included in this item ). (Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed.) |
| 10 | S&F for 40mm thick Flush shutters, solid core contruction, with block board core and plywood face panels, commercial type ion both sides and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S. S screws complete all as specified and as directed by Engineer-in-Charge. |
| 11 | M&L for Framed work Fe-410-W(Gde-E-250) quality-Bas in doors or gates, window of angle or other section with gusset plates, rails,braces, etc. complete, drilled for fixing of steel sheeting or othe rcovering. Doors, etc. to be prepared for hanging or sliding with asn including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed by Engineer-in-Charge. (Note :- Purchase voucher and test certificate of mild steel work shall be submitted before any claim of payment duly defaced by the Engr-in-Charge and Contractor & also entered in measurement book) |
| 12 | M&L for 1mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood ot steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and as directed by Engeer-in-Charge. |
| 13 | S&F for mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 including welding, fixing in position, embedding in concrete complete all as specified and directed. (Note :- Purchase voucher and test certificate of mild steel work shall be submitted before any claim of payment duly defaced by the Engr-in-Charge and Contractor & also entered in measurement book) |
| 14 | S &F for aluminium alloy, anodised, sliding door bolt 250mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 15 | M&L for preparation of new or previously untreated steel or iron surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of Synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 16 | S & F for 150 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 17 | Note:- The contract sum arrived after deduction of amount of Sch of credit as listed in tender Documents. Please Enable Macros to View BoQ information |
