|
| 1 | Taking down chowkhat or frame exc. 1.5 sqm but n.exc 4 sqm each without taking off shutter from the frame complete all as specified and directed by Engineer-in-Charge. |
| 2 | Taking down chowkhat or frame n .exc. 1.5 sqm each without taking off shutter from the frame complete all as specified and directed by Engineer-in-Charge. |
| 3 | M&L Factory made single extruded WPC (wood polymer composite) solid decorative door/ window/ ceosetory windows & other frames/ chowkhat of size 45x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice huck/ wheat huck ) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire resisdant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/ window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 4 | M&L factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. (Note: stainless steel butt hinges shall be paid separately) |
| 5 | M&L Factory Made 35mm thick 100% Solid WPC ( Wood polymer Composite ) laminated Wiremesh Door Shutter of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm manufactured by company an ISO 9001 - 2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 , Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter. For fixing Mosquito mesh and XTN aluminium mesh combinly panel area of door except stiles and rails to be panelled with mesh with self tapping round headed scresws at required distance, scres and edges covered with feathered pvc edge beading all around of mesh and fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For Internal/ Balcony/ Main Doors. |
| 6 | S&F SS handles, oval type, 125 mm size fixed complete all as specified and directed |
| 7 | S&Fin repairs 300 mm SS sliding door bolts, plate type, with bright, bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts four on bolt plate and two on staple plate complete all as specified and directed. |
| 8 | S&F 200 mm long SS barrel tower bolts and fixed, complete all as specified. |
| 9 | S&F 150 mm type-D, SS handles, complete all as specified. |
| 10 | S & F Butt hinges 100 mm size, SS hinge, type C-21 complete all as specified directed |
| 11 | S&F 300 mm mild steel ordinary rat tail rod pattern springs, including roller & roller plate complete all as specified directed |
| 12 | S&F in repair SS Floor door stopper with hard drawn steel spring 150mm size fixed in floor complete all as specified directed |
| 13 | Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.) |
| 14 | Dismantling brick tiles or terracing tiles, single layer on roof and removal of unserviceable brick tiles / brick bats of rubbish outside defence land upto a distance exc 1.5Km but n.exc 5Km, complete all as specified and directed. |
| 15 | Taking down existing bitumen felt including cement mortar bedding padding and cleaning the surface and removal of all rubbish outside defence land upto a distance exc 1.5Km but n.exc 5Km, complete all as specified and directed. |
| 16 | Demolition of mud phuska in roof, any thickness, including plastering and leaping (whether full thickness removed upto mother slab) and removal of all rubbish outside defence land upto a distance exc 1.5Km but n.exc 5Km, complete all as specified and directed. |
| 17 | M&L for PCC 1:2:4 type B-0 (12.5 mm graded crushed stone aggregate ) as in padding on roof laid in 50mm thick average required thickness to maintain desired slope, finished even and fair without using extra cement, complete all as specified and directed. |
| 18 | Material and labour for cement concrete (1:2:4) type B-0 using 12.50 mm graded crushed stone aggregate, as in roof kerb, mud stops, benching, including use and waste necessary form work including demolition of existing PCC and removal of all rubbish outside defence land upto a distance exc 1.5Km but n.exc 5Km, complete all as specified and directed. |
| 19 | Material and labour for rendering 10mm thick in cement mortar (1:3) using WPC @ 200 ML per 50 Kg bag of cement on surfaces of roof and parapet, finished even & fair without using extra cement, complete all as specified and directed.Note:- WPC shall be measured and paid separately. |
| 20 | Supply only Liquid water proofing compound complete all as specified and directed by Engineer-in-charge. |
| 21 | Roughening the surfaces of old concrete roof surfaces & sides by picking, brushing with wire brush, sweeping clean and washing down with water to remove dust, exc material etc., brushing neat cement slurry with 3.0 kg of cement per Sq. m over cleaned roof surfaces complete all as specified and directed by Engr-in-Charge. |
| 22 | M&L for cleaning crack or groves in RCC slab / brick tiles / PCC tiles surface of width upto 25 mm and in any existing depth with compressed air to make free from all loose and foreign particals filling with poly plastic fibre adhesive/ Ezee Coat Ultra and white cement in equal portion (1:1) as a prime coat to level the bottom surface complete all as specified and directed by Engineer-in-Charge |
| 23 | M&L for cleaning the surface before final treatment on roof as specified, applying the double layer of glass fibre mesh of 60 GSM over the roof using poly plastic fibre adhesive/Ezee coat Ultra mix in the following manner :-(a) Making poly plastic fibre adhesive/Ezee coat Ultra mix by adding polyplastic fibre/Ezee coat Ultra white cement in equal portion and add 25% water in it to make the mixture per manufacturer instructions. (b) The double layer of fibre mesh to be spread on the roof & apply two coat of above mixture of poly plastic fibre/Eazee coat Ultra adhesive with a roller & brush to cover the fibre mesh throughouly. (c) Process of roof lamination :- Lamination/top coat on the roof using poly plastic fibre/Ezee coat Ultra coat with water as per manufacturer instructions. Top coat is ammonia free, w/o any harmful effects, & is flexible in nature. (d) Min thickness of the treatment shall be 2mm. |
| 24 | Dismantling plain or corrugated steel sheeting/fibre glass transuscent corrugated sheeting, any gauge,thickness, including Nainital or similar pattern roof covering complete all as specified and and directed by Engineer-in-Charge. |
| 25 | Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc 15cm thickness below or above ground level complete all as specified and and directed by Engineer-in-Charge. |
| 26 | Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engineer-in-Charge. |
| 27 | Dismantling posts or struts (wood, steel or RCC) any section, including taking out embeded portion and making good disturbed ground with concrete or brick work etc complete all as specified and directed by Engineer-in-Charge. |
| 28 | Taking down mild steel rolling shutters of any size and description complete all as specified and as directed by Engineer-in-Charge. |
| 29 | Taking down cement plaster of any description on brick or stone walls, etc including raking out joints, hacking for ke,y scrubbing down with water etc and removing the demolished material out side of the defence land complete all as specified and directed. |
| 30 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge. |
| 31 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed. |
| 32 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof convering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge. |
| 33 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof convering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge. |
| 34 | M&L for 100mm thick plain cement concrete 1:4:8 type D-2 (40 mm graded crushed stone aggregate) as in sub base complete all as specified and directed by Engineer-in-Charge. |
| 35 | M&L for 100mm thick plain cement concrete 1:2:4 type B1 (20 mm graded Crushed stone aggregate) finishing surface by brooming without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 36 | M&L for Rubber moulded chequered cement concrete tiles glossy finish (Red/Yellow) 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bed of cement mortar (1:6) including pointing in white cement with pigment to match the shade of tiles complete all as specified and directed by Engineer-in-Charge. |
| 37 | M&L for Rubber moulded 80mm thick machine pressed coloured glossy finish (Red/Yellow) precast concrete interlocking paver blocks with grey cement and pigment any shape and size conforming to IS 15658-2006 M-40 grade including 25mm thick sand cushion complete all as specified and directed by Engineer-in-Charge. Sandeep Bros/ NTC/ ULTRA |
| 38 | M&L for brick work with sub class \\"B\\" bricks, straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge. |
| 39 | M&L for 10mm thick plaster in CM 1:6 on fair face of concrete surface or brick walls finished even and smooth without using extra cement complete all as specified |
| 40 | M&L for 15mm thick plaster in CM 1:4 on other than fair face of brick walls or concrete surface, finished the surface fair and even without using extra cement complete all as specified |
| 41 | M&L for 10mm thick plaster in CM 1:3 on concrete ceiling surfaces finished even and smooth without using extra cement complete all as specified |
| 42 | M&L for rendering 10mm thick on concrete surfaces in cement mortar 1:3 finishing even and smooth without using extra cement to RCC ceiling, chhajjas, roof projection, facia, fins, parapet etc and similar likes at any height including necessary scaffolding including taking down cement/lime plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge. |
| 43 | M&L for preparation of new plastered/concrete surfaces of walls and applying two coats of oil bound distemper over one coat of primer white or tinted , over 2mm thick birla white putty upto 12 Mtr height including necessary scaffolding etc complete all as specified and directed.Note:- Application of distemper shall be with the help of a roller only. |
| 44 | M&L for preparation of newly plastered wall surfaces applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 45 | M&L for preparation of new plastered/concrete ceiling surfaces and applying two coats of oil bound distemper over one coat of primer white or tinted , over 2mm thick birla white putty upto 12 Metre height including necessary scaffolding etc complete all as specified and directed.Note:- Application of distemper shall be with the help of a roller only. |
| 46 | M&L Machine cut kota stone slab flooring 20-25 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to mirror finish laid over and including 20 mm thick Screed bed or bedding layer in Cement Mortar 1:6 for laying floor finishes complete all as specified and as directed. |
| 47 | M&L, machine cut Kota stone slab 18 to 20 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of slab in skirting, dado and pillar including rubbing and polishing including rendering 10 mm thick on wall and the like to receive tile in cement mortar (1:4), complete all as specified. complete all as specified. |
| 48 | M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in 12mm thick Screed bed or bedding layer cement mortar (1:3) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 49 | M&L for Grinding & mirror polishing of old kota stone/granite/marble/baorda green floor/skirting with machine in and including making good of wall finishes as per original specifications complete all as specified and directed by Engineer-in-Charge. |
| 50 | M&L for non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed Cement Mortar 1:4 complete all as specified and directed by Engineer-in-Charge. |
| 51 | M &L for glazed ceramic coloured tiles in vertical surface 300x 600x 10mm thick set and jointed in neat cement of required shape and size as in skirting/dado etc set and jointed in neat cement slurry over & incl 10 mm thick rendering in Cement Mortar 1:4 and pointed in white or coloured cement to match including dismantling of existing tiles complete all as specified and directed by Engineer-in-Charge. |
| 52 | M&L for 75mm thick cement concrete 1:3:6 type C1 using 40mm graded Crushed stone aggregate as in plinth protection without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 53 | Dismantling fencing wire mesh, any type complete all as specified and directed by Engineer-in-Charge. |
| 54 | Excavating in post holes (or similar holes) each not exc 0.50 Cum, getting out in hard/dense soil, returning filling in and ramming earth or Broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed by Engineer-in-Charge |
| 55 | M&L for cement concrete Type B-1, 1:2:4 (using 20 mm graded crushed stone aggregate) for post, struts (including caps) including weathering, slightly rounded or chamfered angles and throating and including necessary form work all as specified and directed |
| 56 | S & F for 10mm dia MS round bar for tighting/securing fencing wire etc,including two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed by Engineer-in-Charge |
| 57 | S&F Mild steel plates (plain or chequred) channels, square cut or nottched (ordinary and counter sunk) forming holes, without any attachment Fe-410W (gde-E-250) quality B complete all as specified and directed by Engineer-in-Charge. |
| 58 | S&F hand rails, half round or other steel section or core for wooden hand rail straight portion, drilled and countersunk for balusters running bars, for doors,nbalusters, nosing to steps including embeding n concrete and screwing etc winf tiles for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed by Engineer-in-Charge. |
| 59 | M&L for Mild steel Roof trusses (framed), trussed, purlins, crane gantires, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats including post etc conforming to Fe-410-W (Gde E-250) quality B complete all as specified and directed by Engineer-in-Charge. |
| 60 | S&F fabric fencing mesh of size 100mm x 100mm made of GI wire of dia 2.5mm to 3mm, PVC coated to achive, outer dia not less than 4mm in reuired colour and shade fixed in post with nut and bolts complete all as specified and directed by Engineer-in-Charge. |
| 61 | M&L for Overhauling, servicing and realignment of rolling shutters of area not exc 12 sqm including replacement of defective bearing and grinding of wheels for smooth movement of doors, replacement of clamps, bolts etc including cleaning, oiling and greasing of moveable parts and welding work complete all as specified and as directed by Engineer-in-Charge. |
| 62 | S&F 5 mm thick float glass, tinted/smoked shade fixed to frame for door/window/partition etc including aluminium powder coated snap beading and rubber gasket including hacking out old complete all as specified and directed by Engineer-in-Charge. |
| 63 | S&F 4mm thick float glass, tinted/smoked shade fixed to aluminium door/ windows and iron frame including aluminium powder coated snap beading and rubber gasket including hacking out old complete all as specified and directed by Engineer-in-Charge. |
| 64 | S&F in repair floor door stopper of aluminium alloy body and tongue, 140mm size ,anodised, with hard drawn steel spring complete all as specified and directed by Engineer-in-Charge. |
| 65 | S&F door closer aluminium (Die cast) body, hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and directed by Engineer-in-Charge. |
| 66 | S&F 180 mm size Powder coated(any tint) \\"American Handle\\" fixed to aluminium door with suitable screws complete all as specified and directed by Engineer-in-Charge. |
| 67 | S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed by Engineer-in-Charge. |
| 68 | Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed by Engineer-in-Charge. |
| 69 | Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed by Engineer-in-Charge. |
| 70 | M&L for 15mm bore 'medium grade' GI tubing with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge. |
| 71 | M&L for 20mm bore 'medium grade' GI tubing with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge. |
| 72 | S&F in repair15 mm bore stop valve, cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and directed by Engineer-in-Charge. |
| 73 | S&F in repair CP fancy type bib taps 15mm bore, cast copper alloy with capstan handle, screwed down, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engineer-in-Charge. |
| 74 | M&L for preparation of new or previously untreated steel surface of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge. |
| 75 | M&L for preparation of old steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge. |
| 76 | M&L for Treating soil along the external wall below concrete or masonry apron using chemical emulsion (Chlorophyriphos 20 EC conforming to IS 8944 or Imidacloprid 30.50 SC conforming to IS 16131 (Refer Table 1 on Sl. Page No. 2 of IS 6313 (Part 2) : 2013)) @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron, complete all as specified and directed. |
| 77 | M&L for Treatment of soil under existing floors using chemical emulsion (Chlorophyriphos 20 EC conforming to IS 8944 or Imidacloprid 30.50 SC conforming to IS 16131 (Refer Table 1 on Sl. Page No. 2 of IS 6313 (Part 2) : 2013)) @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors, complete all as specified and directed. |
| 78 | M&L for Treating the soil under plinth protection at the rate of 5 litres of chemical emulsion (Chlorophyriphos 20 EC conforming to IS 8944 or Imidacloprid 30.50 SC conforming to IS 16131 (Refer Table 1 on Sl. Page No. 2 of IS 6313 (Part 2) : 2013)) per square metre of surface area, complete all as specified and directed. |
| 79 | M&L for Treating at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) (Chlorophyriphos 20 EC conforming to IS 8944 or Imidacloprid 30.50 SC conforming to IS 16131 (Refer Table 1 on Sl. Page No. 2 of IS 6313 (Part 2) : 2013)) @ 0.5 litre / hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same, complete all as specified and directed. |
| 80 | M&L for for preparation of old plastered/unplastered/ concrete surfaces of walls and applying two coats of exterior emulsion paint (in camouflage pattern using number of colours) over and including one coat of primer and at any height including necessary scaffolding etc complete all as specified.Note : Pattern of camouflage shall be approved by GE. |
| 81 | M&L for Preparation of old distempered surface including by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil, greasy spots and applying one coat of oil bound distemper on wall any colour or tinted (where as required 1mm thick birla white putty) ) upto 20 Mtr height including necessary scaffolding etc complete all as specified and as directed.Note:- Application of distemper shall be with the help of a roller only. |
| 82 | M&L for preparation of old plastered/unplastered/concrete surfaces of walls, kerbs stone & stopping of surfaces and applying one coat of cement base paint upto 12 Mtr height including necessary scaffolding etc complete all as specified and directed.Note : Application as per SSR Pt-I clause 15.15.1 to 15.15.12 CURING : Painted surfaces shall be sprinkled with water using a fog spray two or three times a day. The curing shall be started as soon as the paint has hardened so as not to be damaged by the spray, about 12 hour after the application. |
| 83 | M&L for preparation of old surfaces and applying one coat of 100% premium acrylic emulsion paint having VOC less than 50gm per litre and UV resistance as per IS 15489:2004, alkali and fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) including filling of cracks, holes and leveling the surface which undulation found with cement, putty upto 30 Mtr height including necessary scaffolding etc. complete all as specified and as directed by Engr-in-Charge.Note : The tint and shade be as approved by the GE. |
| 84 | M&L for preparing old plastered surfaces of ceilings and applying one coat of oil bound distemper including filling of cracks, holes with cement putty upto 12 mtr height including necessary scaffolding etc. complete all as specified. |
| 85 | Supply, fix, testing and installation in repair outdoor sealed unit of cassette type AC of capacity 4 TR as per indoor unit, 3 Star rated, R-32 Refrigerant Hot and cold both comprises of copper condenser, condenser motor, fan and blade, Invertor compressor, capacitor, suction, discharge valve, wiring kit, outer cover duly power coated complete all as specified and directed. Make : Bluestar/ Voltas/ LG. |
| 86 | Supply, fix, testing and installation in repair indoor sealed unit of cassette type AC of capacity 4 TR, as per outdoor unit, 3 Star rated, R-32 Refrigerant, 360 degree air circulation, Hot and cold both comprises of copper condenser, discharge valve, wiring kit, outer cover duly power coated complete all as specified and directed. Make : Bluestar/ Voltas/ LG. |
| 87 | Supply and fix in repair copper tubing superior quality of dia 5/8\\" 15.87 mm (min thickness 0.70mm) with insulation and saddles complete all as specified and directed. |
| 88 | Supply and fix in repair copper tubing superior quality of dia 1/4\\" 6.35 mm (min thickness 0.70mm) with insulation and saddles complete all as specified and directed. |
| 89 | Supply and top up Refrigerant gas R-32 as per requirement all as specified and directed. |
| 90 | Taking down old Split AC 4 Ton indoor and outdoor unit complete from existing location and shifted to MES Store yard. |
| 91 | Note :- Amount of credit of Rs. 52935.00 for retrieved materials is mentioned in Schedule of Credit of tender documents in pdf form which will be deducted offline while acceptance of tender. Please Enable Macros to View BoQ information |
