|
| 1 | 'Notes: (i) Please refer Schedule 'A' Notes of tender documents. |
| 2 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion including concrete foundation and removal of waste material and making good disturbed ground complete all as specified and as directed. |
| 3 | Dismantling fencing wire mesh (chain link) any type, incl removal, complete all as specified and as directed. |
| 4 | Excavating in post holes (or similar holes) each n exc 0.50 cum, getting out, removing the excavated material to a distance n.exc 50m, complete all as specified and directed. |
| 5 | M&L for PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in foundation of posts and struts complete all as specified and as directed. |
| 6 | S&F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia dia barbs at 75mm spacing and straining and fixing to any type standard rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc., complete all as specified and as directed.Note : Each line wire to be measured |
| 7 | Restraining, resecuring including making good staples of Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia dia barbs at 75mm spacing and provisin of galvanised mild steel wire, staple or steel pins etc as complete all as specified and as directed. |
| 8 | S&F Mild steel work as in hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting,etc., 10mm dia MS round bars and similar work conforming to Fe-290 Gde E-165, complete all as specified and as directed. |
| 9 | Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe-410 W(Gde E-250) quality B complete all as specified and as directed. |
| 10 | Preparing new steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed by Engr-in-charge. |
| 11 | Supply only chain link Mild stel galvanized fencing of size 4 mm dia and 100 x 100 mm mesh size, complete all as specified and directed. |
| 12 | Fixing only chain link Mild stel galvanized fencing of any size ,including binding with wire complete all as specified and directed. |
| 13 | S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cm long 11 to 15mm dia of neck complete all as specified and as directed. |
| 14 | Demolition of brick work/stone boulder masonry, built in cement mortar including all quoins, pillars, etc. but including ashler facing, dressed stone work and precast concrete articles, complete all as specified and as directed. |
| 15 | M&L for brick work with Fly ash bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and directed. |
| 16 | M&L providing precast Cement concrete louves and jallies 25mm thick set in cement mortar 1:4 complete all as specified and directed. |
| 17 | M&L for PCC 1:2:4 type B-0 using 12.50mm graded stone aggregate as in coping, bed plate and the like including weathering slightly rounded or chamferred angle and throating incl provision of necessary formwork and finish the exposed surface even and smooth complete all as specified and as directed. |
| 18 | Taking down cement plaster on brick or stone nails, etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed. |
| 19 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces with CM 1:4 finished even and smooth without using extra cement in external surfaces WPC shall be mixed complete all as specified and directed.NOTE-WPC Shall be measured and paid Separately. |
| 20 | M&L for preparation of new plastered surfaces and applying two coats of cement base paint of approved shade on walls all complete all as specified and as directed. |
| 21 | Supply only Liquid water proofing compound, complete all as specified and as directed. |
| 22 | M&L for preparation of old surfaces of wall including scrapping down, smoke soot, efflorescent salts trading oil and greasy spots etc and applying Two coat of cement base paint complete all as specified and as directed. |
| 23 | Supply and fixing of Hot dip galvanised (120-275 GSM Zinc) concertina coil made of 2.5 mm dia high tensile galvanized steel wire, 750 mm diameter coil, BTO-22 razor type blade of length 30 mm @ 35mm c/c, 50-56 loops per coil, 3 to 5 Nos SS clips per loop, 8 to 10 mtr pull length per coil when stretched including necessary clips, binding, fixing accessories and complete all as specified and as directed. Please Enable Macros to View BoQ information |
