Tender For Comprehensive Maint, Petty Repair & Attending Day To Day Complaint In Tech Area At Af Stn Ambala Under Ge (Af) Ambala
Tender Value
40 Lakhs
Estimated cost
Bid Submission
14 Jul 2026
9 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ambala → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Maint, Petty Repair & Attending Day To Day Complaint In Tech Area At Af Stn Ambala Under Ge (Af) Ambala
BOQ
| Sl. No. | Item Description |
| 1 | S&F in repairs 15 mm bore long body bib tap chromium plated fancy type with crutch or butterfly handle screwed down, screwed for iron pipe complete all as specified and directed. |
| 2 | S&F in repairs 15mm bore long body pillar taps CP brass chromium plated fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with chromium plated screwed shanks and fly nuts complete screwed for iron pipe complete all as specified and directed. |
| 3 | S&F in repairs 15 mm long body Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and directed. |
| 4 | S&F in repairs 15mm bore long body Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified and directed. |
| 5 | S&F in repairs Health faucet chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and CP wall hook including making connections and fixed in position complete in all respect as specified. |
| 6 | S&F in repair angle valves 15 mm fancy type, chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 7 | S&F in repair brass chromium plated shower rose 125mm size size fixed to pipe complete all as specified and directed. |
| 8 | S&F in repair vitreous china ware wash hand basin 550mm x 400 mm size, white, flat back or angle including removing the existing one complete and refixing with new bracket and making good complete all as specified and directed. |
| 9 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern, with EWC including P or S trap ,seat cover , including connection to trap /drain and to flushing pipe anti syphonage pipe etc complete including making good floor complete all as specified as directed. |
| 10 | S&F in repair vitreous china squating pan orissa pattern size 580X 440mm white with intregal foot rest complete including lime concrete(excl flushing cistern and flush pipe) but connecting to flushing pipe, anti-syphonage pipe etc complete complete all as specified as directed. |
| 11 | S&F 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including taking down unserviceable cistern complete all as specified and directed. |
| 12 | S&F in repairs 15 mm bore PVC connection 600 mm long with brass nuts and washers on both ends all complete all as specified and directed. |
| 13 | S&F in repair 15 mm dia Brass CP long shank wall mixer, sink mixer, WHB mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specifies and directed. |
| 14 | S&F in repair Soap dish, vitreous China white, aprroximate size 160x 160x90mm complete all as specified and as directed. |
| 15 | S&F 500 ltr capacity triple layer, rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position with 20mm bore high density plastic ball brass valves, high pressure of PTMT with epoxy coated aluminium rod screwed for iron pipe and fixed including dismantling water tanks of capacity exceeding 250 litres but not exceeding 500 litres complete all as specified and directed. |
| 16 | S&F 1000 ltr capacity triple layer, rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position with 20mm bore high density plastic ball brass valves, high pressure of PTMT with epoxy coated aluminium rod screwed for iron pipe and fixed including dismantling water tanks of capacity exceeding 500 litres but not exceeding 1000 litres complete all as specified and directed. |
| 17 | S & F 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors including taking down steel tubing and connections complete all as specified and directed. . |
| 18 | S & F 20 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors including taking down steel tubing and connections complete all as specified and directed. . |
| 19 | S & F in repair 20 mm bore in repair Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 20 | M&L for Tank cleaning and removing all scale and directed etc from tanks and from months of circulating pipes etc, exceeding 250 and not exceeding 500 ltr capacity (date of cleaning to be mentioned on PVC tank) complete all as specified and directed. |
| 21 | M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding. 0.5 Sqm in each panel incluing hacking out old broken glasses any thickness size, quality or description from metal frames including punching or drilling out old glazing pins / spring clips and providing and fixing new ones. hacking any bldg height complete all as specified and as directed. |
| 22 | S&F in repair CP Grating 100mm dia complete all as specified and as directed. |
| 23 | Petty repair to leaking bib cock, pillar cock, stop cock, angle valve , gate valve any size, brass spindle, waste pipe, shower rose, float valve,concealed stop cock, PVC connection of any description by changing of jumper washer, spindle for bib cock, pllar cock,concealed stop cock etc or putting M seal cleaning of air lock in the pipe for ensuring proper water supply Repair to leaking flushing cistern low/high level, including adjustment in the internal fiiting replacement of syphon, washer/jumper, flush handle, lever etc as required , Petty repair for rectification of air lock in GI pipe and making the water supply available upto water taps including attending the complaints of no water supply.repair to PVC bend, pipe etc . ( Rates are deems to be including replacement washers (hot/cold) ,, flush pipe,GI Nipple,union,Socket,Reducer Socket,bend,Elbow,Reducer Elbow ,Tee,brass spindle, flush syphon, flush handle, pata screws etc) complete all as specified. Notes:-1. The contractor shall make all arrangement for attending the different types of complaints on day to day basis. 1.. Rate shall be quoted accordingly, keeping in mind above said provisions.2. The complaint shall be attended by the contractor within 48 hours from the lodge of complaint, failing which a panel recovery Rs 50/ complaint shall be recovered from the contractors dues. |
| 24 | Attending complaint for repair to easing of any type of Doors/Window/Cup Board shutters and chowkhats, aluminum doors by tightening of hinges / handles / aldrop bolt / tower bolt / knobs, hasp and staple etc of any size / any number of panels for easy closing / opening or changing the position of hinges, adjustments of tower bolts, sliding bolts, replacement of looking mirror, curtain rod etc complete including taking down joinery and refixing in the same place and replacement of minimum defective item if required like screws, nails, bits etc, complete all as specified and directed by Engineer in Charge.Notes:- 1. The contractor shall make all arrangement for attending the different types of complaints on every day basis. Any major item required to be replaced with new one, to make the joinery work functional shall be measured and paid for separately as S&F under respective item of this schedule. Old retrieved item(s) as considered in 'Schedule of Credit' shall become property of the contractor. 1. Rate shall be quoted accordingly against these items, keeping in mind above said provisions.2. The comlaint shall be attended by the contractor within 48 hours, failing which a panel recovery of Rs 50/ complaint shall be recovered from the contractor dues and no dispute will be intertained at later date. |
| 25 | Taking down chowkhats or frame with shutter (without taking out shutter from the frame exceeding 1.50 Sqm and not exceeding 4 sqm each and removing from site complete all as specified and directed. |
| 26 | Taking down chowkhats or frame with shutter (without taking out shutter from the frame not exceeding 1.50 Sqm each and removing from site complete all as specified and directed. |
| 27 | S&F pressed steel frames section 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed. |
| 28 | S&F pressed steel frames section 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed. |
| 29 | M&L for preparation of new or previously untreated steel surfaces of any description, over 10cm width or girth and apply two coat of synthetic enamel paint over a coat of red oxide complete all as specified and as directed . |
| 30 | M&L for 30mm thick factory made flush door shutters solid core construction with block board core and ply wood face panels commercial type on both faces complete all as specified and as directed. |
| 31 | S&F 35mm thick 2nd class HW glazed skeleton shutters open rebated and prepared to receive glass gazed etc but divided into squares with plain chamfered or rounded mitred and rebated sash bar any numbers edges of framing plain chamfered or rounded fitted with cut and mitred beads for sceuring glass guage etc. size of members as specified in SSR pt-I section 8 clause 8.24(a) fitted to chowkhats complete all as specified and directed. |
| 32 | M&L for preparation of new painted wooden based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 33 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 34 | S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 35 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed. |
| 36 | S&F factory made solid panel PVC door shutter 30mm thick consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with neat moulded plan colour PVC 'C' channel having a PVC sheet strips of 20mm width stuck in side with solvent cement for styles and plain colour PVC sheets for top rails, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheets to be fitted in the MS frame welded/sealed to the stiles, and rails with suitable PVC sheet bedding and jointed together with solvent cement, supply and fixing in the frame at site as per specification complete all as specified and directed. |
| 37 | S&F butt hinges medium weight cold rolled mild steel 100mm complete all as specified and directed. |
| 38 | S&F 75 mm size mild steel butt hinges, medium weight cold rolled complete all as specified and directed. |
| 39 | S&F in repair butt hinges medium weight cold rolled mild steel 100mm complete all as specified and directed. |
| 40 | S&F 125mm aluminium anodised of extruded section barrel tower bolts complete all as specified and directed. |
| 41 | S&F 150 mm long Aluminium anodized barrel tower bolt, complete all as specified and directed. |
| 42 | S&F in repair 125mm aluminium anodised of extruded section barrel tower bolts complete all as specified and directed. |
| 43 | S&F in repairs 150 mm long Aluminium anodized barrel tower bolt, complete all as specified and directed. |
| 44 | S&F 150mm long alumiunium handles cast type anodised. complete all as specified and directed. |
| 45 | S&F in repairs 150mm long alumiunium handles cast type anodised. complete all as specified and directed. |
| 46 | S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed 300mm long complete all as specified and directed. |
| 47 | S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed. |
| 48 | S&F in repairs aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed 300mm long complete all as specified and directed. |
| 49 | S&F in repair 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed. |
| 50 | S&F mild steel 300mm, ordinary rat tail rod pattern spring, including roller and roller plate complete all as specified and directed. |
| 51 | S&F in repairs mild steel 300mm, ordinary rat tail rod pattern spring, including roller and roller plate complete all as specified and directed. |
| 52 | S&F in repair 600 x 450mm bevelled edge mirror 5.5mm to 6mm thick selected quality glass flaw less, firmly mounted on 6mm thick commercial ply wood backing and fixed to wooden plug with chromium plated brass screw and cup washer complete all as specified and directed. |
| 53 | S&F in repairs water tank covers of capacity up to 1000 ltrs complete all as specified and directed. |
| 54 | S&F PVC in repair waste pipe 32/40mm dia for wash basin/sink/urinal. complete all as specified and directed. |
| 55 | Welding in repairs including cleaning and preparing the surfaces to be welded together, holding the members in true position while welding and bevelling of edges, as required complete all as specified and directed. |
| 56 | S&F in repair plastic water closet seat cover for pedestal or semi pedestal pattern, white closed pattern with flat bottom with PVC nuts and screws complete all as specified and directed. |
| 57 | S&F in repairs door seal brush for providing protection from insects complete all as specified and directed. |
| 58 | S&F in repair prelaminated particle board, 18/19 mm exterior grade, prelaminated two side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed. |
| 59 | S&F anodised podwer coated aluminium door made out hollow aluminium section as mentioned below. Each door having 02 Nos disk or D type handle of 200 mm long , two Nos aluminium tower bolts of 200 size , one No mortice lock of six levers with key in duplicate regulated by double action hydraulic floor door spring (Make - Sandhu/Titz) shutters to be partly glazed with 5mm thick tinted glass and partly panelled with 12mm thick prelaminated particle board fixed with glazing clips, rubber beading/gasket anodised aluminium beading screws etc complete all as specified and as directed. Make :- Anodised aluminium section : HINDALCO/JINDAL/INDALCOGlass : SAINT GOBAIN/MODI GUARD/TATACHOWKHATS SIZE : 100 X 44 X 1.60 MM THICK SHUTTERS VERTICLE STYLE : 100 X 44 X 1.60MM SHUTTERS LOCK RAIL : 150 X 44 X 1.60MM SHUTTERS BOTTOM RAIL : 200 X 44 X 1.60MM |
| 60 | S&F in repair anodised aluminium partition wall or fixed type window/ventilator made out of aluminium anodised standard hollow section 100 x 44 x 1.60mm thick snap fit beading standartd rubber gasket 5.5mm thick glass or 12mm thick prelaminated particle board interior grade prelaminated one side with decorative choice laminates and other side balancing light grey lamination etc complete all as specified and as directed. |
| 61 | S&F three track with two or more shutter with 4mm thick tinted glass, one shutter of Stainless steel wire cloth 0.36mm nominal dia & 1.18 mm width aperture for mosquito proofing with good quality bearing , handle lock , rubber beading and glazing clips etc using following aluminium powder coated section conforming to following catalogue of 'JINDAL' or of equivalent make as mentioned in list of makes here-in-after complete all as specified and as directed by Engr-In-Charge(a) Bottom frame 20620 (b) Top frame & vertcal 20621 (c) Handle (side) 20606 (d) Shutter Interlock 20724 (e) Shutter Top & bottom 20844 (f) Glazing clip 19352 |
| 62 | S&F in repairs Waste coupling for sink, WHB 32/40mm dia chromium plated complete all as specified and directed. |
| 63 | S&F in repairs aluminium ( Die cast ) body door closer hydraulically regulated designation No. 2 universal type suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 kg and. complete all as specified and as directed. |
| 64 | S& F in repair aluminum glazing clips / beading for aluminum door and window complete all as specified and directed. |
| 65 | S& F in repair rubber gasket for packing / beading for aluminum door and window complete all as specified and directed. |
| 66 | Dismantling Brick tiles or terracing tiles, single layer on roofs including thatching any type, demolition of mud phuska etc including cleaning the surface by water/air pressure and removal of debris beyond MOD land complete all as specified and directed |
| 67 | Roughening cleaning to RCC roof surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. and brushing neat cement slurry with 3.Kg of cement per sqm complete all as specified and directed. |
| 68 | M&L for providing 40mm thick cement concrete 1:2:4 type B-1 20mm graded mechanically crushed stone aggregate for level course complete all as specified and directed. |
| 69 | M&L for Rendering 15mm thick in CM 1:4 on other than fair faces of brick work or concrete surfaces with WPC as per manufacturer instructions , finished even and smooth without using extra cement complete all as specified as directed.Note: WPC shall be measured and paid separately. |
| 70 | Supply only water proofing compound complete all as specified and directed. |
| 71 | M&L for water proofing treatment to roof surface with APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric weight not less than 150 gms/sqm) laid over primer @ 0.50 Kg/Sqm surface by torch sealed application complete all as specified and directed.Note: water proofing shall be done by authorised applicator only. |
| 72 | Material and labour for 40mm thick brick tiles laid and bedded in cement mortar 1:6, 15mm thick and joints grouted flush in cement mortar 1:3 mixed with 5% or crude oil by weight of cement complete all as specified and as directed. |
| 73 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as specified and as directed. |
| 74 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws all as specified and as directed. |
| 75 | Dismantling of structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed. |
| 76 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 77 | M & L for 100 mm thick Cement concrete 1:4:8 type D2 graded mechanically crushed stone aggregate in as in sub base of floors complete all as specified and as directed. |
| 78 | M&L for 75 mm thick cement concrete type C-2, 1:3:6 ( using 20 mm graded mechanically crushed stone aggregate) as in path/pavings/plinth protection, floors etc laid in bays including fair finishing the concrete surface even and smooth without using extra cement including putting expansion joints filled with polyurethane joint sealants/glass dividing strips or complete all as specified and directed by Engr-in-Charge. |
| 79 | M&L for prepolished 60 mm thick rubber moulded double glossy coloured designer interlocking tiles made of M-35 design mix concrete, laying over 25 mm thick sand cushioning, with the crushing strength not less than 250 Kg/Sqcm of approved design and shape, complete all as specified and directed . |
| 80 | M&L for Chequered cement concrete prepolished colour tiles 30 cm x30 cm x 25 mm thick,set jointed and pointed in neat cement slurry in floor using grey cement with pigment.including 20 mm thick screed bedding in CM 1:6 over complete all as specified and directed |
| 81 | M&L for PCC 1:2:4 type B1 using 20mm graded mechanically crushed stone aggregate as in coping & as in bonding/locking of edges of interlocking tiles including weathering slightly rounded or chamfered angles & throating etc including necessary form work complete all as specified and directed. |
| 82 | S&F MS framed work as in doors or gates of angle or other sections with gusset plates, rails, braces, trusses, purlins etc complete drilled for fixing to steel sheeting or other covering, doors, etc, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging, also fastening and fixing complete conforming to Fe-410-W complete all as specified and as directed. |
| 83 | S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 complete all as specified and directed. |
| 84 | Excavation in post holes each not exceeding 0.5 cum getting out, returning, filling in and removing earth or brocken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance not exceeding 50m in soft/loose soil and making good surface as per existing surface complete all as specified and as directed. |
| 85 | M&L for cement concrete 1:4:8 Type D-2 (using 40 mm graded mechanically crushed stone aggregate) as in foundation filling or mass concrete complete all as specified and as directed. |
| 86 | S&F 5mm thick plain colour PVC sheet hollow interlocking wall panelling of width 250 mm for wall panelling inclusive of fixing on wall with screws and solvent alongwith PVC 'U' and 'L' beading at corner and end portion where ever required of matching colour including taking down of existing wall lining, board or insulation board/panelling including cover fillets of any type and thick complete all as specified and as directed.NOTE : - Unit rate quoted against this item shall also includes taking down and refixing the same of any electrical board, switch, sockets, light and fittings, fans etc after carrying out necessary relevant work and making good to match with existing surface effected for this area etc complete all as specified and directed. |
| 87 | S&F fully perforated false ceiling 12 mm thick with micro tegular edged at all height with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595 x 595 mm of approved texture, design and pattern having moisutre content less than 2%, humidity resistance of 99%, NRC 0.60 to 0.85 as per IS 8225-1987, non combustible as per BS 476 (Part-4) 1970 and light code description unit code No 429 Sub Head 26. New Technologies and materials reflectance of 85% minimum to be laid in true horizontal level suspended on interlocking metal T -grid of hot dipped galvanised iron section of 0.33 mm thick ( galvanised @ 120 gms/ sqm including both sides) comprising of main T- runners of size 15x 32mm of length 3000mm, cross T of size 15 x32 mm of length 1200mm and secondary intermediate cross T of size 15 x 32 mm of length 600 mm to from grid module of size 600 x 600 mm, suspended form ceiliing using galvanised mild steel items (Galvanised @ 80 gm/sqm) i.e. 50 mm long, 8mm outer diameter M-6 dash fastners, 6mm dia fully threaded hanger rod upto 1000mm length and L shape level adjuster of size 85 x 25 x 2mm. galvanised iron perimeter wall angle of size 24 x 24 x 0.4 mm of length 3000 mm to be fixed on perimeter wall / partition with the help of plastic rawl plugs at 450 mm centre to centre and 40 mm long dry wall SS screws including taking down old ceiling. The work shall be carried out as per specification, drawing and as per direction of the Engineer-in-Charge.NOTE : -Unit rate quoted against this item shall also includes taking down and refixing the same of any electrical board, switch, sockets, light and fittings, fans etc after carrying out necessary relevant work and making good to match with existing surface effected for this area etc complete all as specified and directed. |
| 88 | Demolition of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish/ demolished material off the premises, complete all as specified and directed |
| 89 | M & L for non skid coloured ceramic tiles 7 to 8mm thick jointless (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engr in Charge. |
| 90 | M & L for Glazed Coloured Ceramic tiles in vertical surface 350x250x7mm / 450x350x7mm thick jointless set and joint in neat cement slury and pointed in white or colour cement to match over and including 10mm thick plaster in CM 1:4 as backing coat to receive tiles complete all as specified and directed. |
| 91 | M & L for non skid coloured ceramic tiles 7 to 8mm thick jointless (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engr in Charge. |
| 92 | Cleaning of dust Removal of all loose existing bituminous material manually and with heat torch gun to get smooth plain finished surface including removing of vegetation/plantation with no loose material on surface. Repair all joints and cracks with Highly elastic Bituminous cold applied putty of Tarplastic having penetration after setting upto 8mm. Levelling of surface to give proper slope will be done as per site requirements with Shalipatch or equivalent make of approved by GE cold applied, Bituminous Mortar & Cold Emulsion cum waterproofing Liquid of Shalikote-T-10 or equivalent make of approved by GE, Created SSD condition on surface with water. Prime the surface with Tarfelt LM or equivalent make of approved by GE mixed with portable water in the ration of 1 :1 and apply @400gm per Sqm (As per Surface Conditions). . Apply first coat of Tarfelt LM or equivalent make of approved by GE having elongation 200% conforming to ASTM-C-412 & having crack bridging of 8mm confirming to ASTM-C-836 with tensile strength after 7 days 0.50 mm conforming to ASTM-C-412 with no diluation of water on primed surface while the surface is still tacky with consumption of 700gm per Sqm. . Lay Geotex of 45 GSM/ Fibre mesh simultaneously and paste it properly with overlap of 50mm. . Allow the first coat to dry for 10 to 12 Hrs. . Apply 2nd coat on cured first coat with consumption @ 700gm per Sqm in opposite direction of first coat by Brush or Roller.. Allow it to dry for 10-12 hrs after apply 3rd coat with consumption @ 700gm per Sqm.Ensure final curing time of 36 hrs before allowing/ carrying out any further work. Conduct ponding test after min 7 day applying two coats of U V Resistand Elastomeric Exterior Axcrylic Weather resistant water proof coating of Shalicryl-215 or equivalent make of approved by GE having elongation of 300% after curing of 14 days confirming to ASTM D- 6083-- for U V Protection of Bituminous Elastomeric Acrylic Emulsified Liquid Membranc of Tarfelt LM or equivalent make of approved by GE to give long life and prevent its deterioration from sunlight.Note:- Application of water proofing treatment will be done by Authorised Applicator only. |
| 93 | S&F in repair 20mm dia powder coated MS curtain rod with require brackets, decorative piece on ends with teak finish appreance etc complete all as specified and directed. |
| 94 | M&L for preparation of plastered or unplastered surfaces of walls and applying one coats of distemper oil emulsion on old surfaces upto any height including necessary scaffolding as required, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysJul 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender