|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. : All kind of soil. |
| 2 | Hand Packed stone filling in back of walls including cost of all materials, royality, T&P etc. complete as per direction of Engineer-in- charge. (As per PWD Uttarakhand specifications) |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 4 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form for : Shelves (Cast in situ) |
| 6 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level : Thermo-mechanically Treated bars of grade Fe-500D or more. |
| 7 | Steel work welded in built up sections/framed work,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc.as required : In grating, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 8 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colors such as white, Ivory, Grey, fume red brown, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) Jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc, complete. |
| 9 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 10 | Providing and fixing of Sandwich panels for wall of thickness 65mm with PPGL metal sheet facing having AZ coating with sheet thickness 0.50mm with premium garde PU Core (of approved quality and make as per Techincal specifications) with all accessories complete in all respect as per the direction of Engineer In charge |
| 11 | Providing and fixing of Sandwich panels for roof of thickness 100mm with PPGL metal sheet facing having AZ coating with top sheet thickness 0.50mm with premium garde PU Core (of approved quality and make as per Techincal specifications) with all accessories complete in all respect as per the direction of Engineer In charge. |
| 12 | Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum .45mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :Ridges plain (500 - 600mm) |
| 13 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to all/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS certification marks) |
| 14 | Providing and fixing of FRP panels door of 30mm thick & frame (90mmx45mm) of approved quality and make as per Techincal specifications) with all accessories complete in all respect as per the direction of Engineer In charge. |
| 15 | Providing and fixing factory made uPVC glazed/wire mesh windows/ doors comprising of lead free uPVC multi-chambered frame,sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness 1.70 mm for Series R1 and R2 profiles and 2.10 mm for series R3 and R4 profiles conforming to EN :12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD specification, uPVC extruded galzing beads, interlocks and inline sash adaptor (where ever required) of apporiate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 136 : part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-In-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-charge. Wire mesh/Glazing of lain/toughened/laminated/double glass unit with/without high performance coatings as per design requirements and conforming to IS:3548 & IS: 16231 shall be paid separately.Two track two panels sliding window with aluminium channel for roller track, wool pile, nylon rollers with SS 304 body.Using R2 series with frame (40mm & above) x (40mm & above) & sash (25mm & above) x (50mm & above) with zinc alloy (zamak) powder coated touch locks with hook (height upto 1.2m). |
| 16 | Providing & fixing of UPVC pipe (working pressure 4 kg / cm2) single socketed pipe 110 mm dia |
| 17 | Providing & fixing of UPVC bends 87.5 110mm bend. |
| 18 | Providing & fixing of C.P. brass bib cock of approved quality conforming to IS:8931 : 15mm dia nominal bore. |
| 19 | Providing & fixing ball valve (brass) of approved quality (high or low pressure with plastic floats) 15mm nominal bore |
| 20 | Providing & fixing C.P brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.: 15mm nominal bore |
| 21 | Providing & fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements , weighing not less than 106 gms. |
| 22 | Providing & fixing toilet paper holder: C.P brass |
| 23 | Providing & fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
| 24 | Providing & fixing PTMT tower rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour: 450mm long towel rail with total length of 495mm, 78mm wide and effective height of 88mm, weighing not less than 170 gms. |
| 25 | Providing & fixing PTMT shelf 440mm long, 124mm width and 36mm height of approved quality and colour, weighing not less than 300 gms. |
| 26 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tanks. |
| 27 | Providing and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes , having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fitting with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer In Charge. 15mm nominal outer dia pipes |
| 28 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 20mm dia nominal bore |
| 29 | Providing & fixing water closet squatting pan(Indian type W.C. pan) with 100mm sand cast iron P or S trap, 10 litre low level white P.V.C. P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White vitreous china orissa pattern W.C. pan of size 580 x 440 mm with intergral type foot rests. |
| 30 | Providing & fixing white vitreous china pedestral type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with with ISI marked white soild plastic seat and lid |
| 31 | Providing & fixing 8mm dia C.P./S.S Jet with flexible tube upto 1 meter long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer-In-Charge |
| 32 | Providing and fixing white vitreous china basin including making all connections but excluding the cost of fittings :Angle back wash basin of size 600 x 480mm |
| 33 | Providing & fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: Stainless steel AISI-304 (18/8) Wash basin 530x345mm with single 15mm C.P. brass pillar tap |
| 34 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing: Rectangular shape of 453x357mm |
| 35 | Making soak pit 2.5m dia 3.0m deep with 45x45 cm dry brick honey comb shaft with bricks and SW drain pipe 100mm dia, 1.8m long complete as per standard design. With common burnt clay F.P.S (non modular) bricks of class designation 7.5. |
| 36 | Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete: Flexible pipe: 32mm dia |
| 37 | Providing & fixing of UV print signage boards 6mm thick WPC including lamination with formats and inscriptions including all fitting in position as per approved by Engineer-In-charge. |
| 38 | Supply & transportation of Panel boards, shed, misc steel to working sites from Dharchula due to remote and different locations of working sites at Elagaad, Rudila,Jumma, Tawaghat, Khela tok Dhura, Garbadhar, Pangla, Chakan, Ghattiyabagarh,Chhiyalekh, Garbyang, Kalapaani, Nabhidhang, Jolingkong, Kanchyoti, Urthing, Panchachuli Base camp & Thanedhar (as per attached map) |
| 39 | Supplying and fixing Cable End Box (Loose Wire Box) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240 Volts, on surface/ recess, complete with testing and commissioning etc. as required - For 6 way, Double door SPN MCBDB |
| 40 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single Pole |
| 41 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Double Pole |
| 42 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 43 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. - Group A |
| 44 | Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 A socket outlet and 5/6 A piano type switch, connections, painting etc. as required. |
| 45 | Installation, Testing and Commissioning of pre-wired, fluorescent fitting / compact fluorescent/ LED fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS/HFFR PVC insulated, copper conductor, single core cable and earthing etc. as required. |
| 46 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. |
| 47 | Supply of LED Tubelight 4ft Please Enable Macros to View BoQ information |
