Tender For Providing & Installation Of 1 Nos India Mark -Iii(65Mm) And Mark-Ii (32Mm) Deep Bore Well Hand Pumps (Sh:- Drilling Of Bore Wells By Dth/Odex/Percussion Calyx/Rc Portable Rigs, 1 Nos Odex Method At Village Kohla Near Shiv Mandir Under Jsv, Hamirpur-Himachal Pradesh
TDR : 56130757
Tender Notice
BOQ
6 Days Left
Hamirpur
Himachal Pradesh
Tender For Providing & Installation Of 1 Nos India Mark -Iii(65Mm) And Mark-Ii (32Mm) Deep Bore Well Hand Pumps (Sh:- Drilling Of Bore Wells By Dth/Odex/Percussion Calyx/Rc Portable Rigs, 1 Nos Odex Method At Village Kohla Near Shiv Mandir Under Jsv
Name of Work:- Providing & Installation of 1 Nos india Mark -III(65mm) and Mark-II (32mm) deep bore well hand pumps (Sh:- Drilling of bore wells by DTH/ODEX/Percussion Calyx/RC Portable Rigs, 1 Nos ODEX method At village Kohla Near Shiv Mandir under JSV Sub Division Nadaun Section Nadaun - I Distt. Hamirpur HP.)
Sl. No.
Item Description
1
Transportation of suitable truck mounted DTH / ODEX /Percussion /Calyx/RC drilling rigs along with necessary accessories etc.to the site of work and errection of rig including leveling etc.complete in all respects as per the direction of Engineer-in Charge.
2
Drilling bores of 152 mm dia as per IS 2800-1979 using ODEX (TUBEX)(IS attachment required driling in collapsible strate conglomerate boulders pebbles,gravels silt clay etc. Including cost of attechement consumable stores bit, water POL etc. complete with system of simultaneous lowering of 125mm nominal bore,5.0mm thick MSERW fincut casing pipe which will be welded together using 2.5mm (or) 3.25mm dia .Advani oerlikon electrodes,with one plain end and the other end chamfered to 50 degress removing paint on the area to be welded inclusive of the cost of bio degradabele and non-toxic foam flush etc.complete in all respect as per direction of Engineer in charge MSERW fincut casing pipe casing show and bit tube as per requirement of ODEX to be paid separately. (2x80=160)
3
Supplying and lowering of IS marked 125mm N.B 5mm thick, fincut MSERW casing pipes as per IS 4270:2001 and requirment of DTH attachment from approved manufacters complete in all respect as per directions of Engineer in charge
4
Providing and fixing of suitable casting shoe and bit tube as per required DTH attachment complete in all respect as per the direction of Engineer in charge
5
Collection and preservation of soil samples in polythene bags complete in all respects as per directions of the Engineer-in-Charge.
6
Development of bore well and yield testing with air-compressor through V -notch and disinfection etc complete in all respect as per IS:2800:1979 and as per direction of the Engineer-in-charge. Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
