Tender For Repair And Maintenance Of Residential Buildings At 400Kv Sub Station Bbmb Panipat
Tender Value
Ref. Documents
Estimated cost
Bid Submission
14 Jul 2026
3 days left
EMD
19970
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Panipat → Haryana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance Of Residential Buildings At 400Kv Sub Station Bbmb Panipat
BOQ
| Sl. No. | Item Description |
| 1 | Scraping - Cement Plaster |
| 2 | 12.5 mm thick cement plaster 1:5 |
| 3 | Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. |
| 4 | (a) Windows of area 3 sqm and below |
| 5 | ( b) Clerestory windows of area 3 Sqm and below |
| 6 | Providing & fixing factory made Solid PVC Chowkhat Door frame of the size 50mm x 47mm with a wall thickness of 5mm made out of extruded 5mm PVC foam sheet, mitre cut at 2 corners & joined with 2Nos of 150mm long brackets of 15 x 15mm M.S square tube. the two vertical doors profiles are to be reinforced with 19 x 19mm M.S square tube of 19 guage, the door framed shall be fixed to the wall using 65/100mm long M.S screws through the frame by using fasteners. a minimum of 4 nos of screws to be provided for each vertical member & minimum 2nos for horizontal member etc. as per manufacturer's specification,conforming to test criteria specified in IS:4020-1998, Drawings and to the entire satisfaction of engineer-in-charge. |
| 7 | Providing & fixing 30mm thick Factory Made solid Panel PVC Door shutter (Pannel thickness 5mm) Consisting of frame made out of M.S tubes of 19 guage thickness and size of 19mm x 19mm for styles & 15mm x 15mm for top & bottom rails. M.S frame shall have a coat of steel primers of approved make & manufacture. M.S frame shall be covered with 5mm thick heat moulded PVC 'C' Channel of size 30 x 50mm forming styles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panneling of 5mm thick PVC sheet to be fitted in the M.S Frame welded/Sealed to the styles & Rails with 30mm wide x 5mm thick PVC sheet beading on either side and joined together with solvent cement adhesive.an additional 5mm thick PVC strips of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent cement adhesive etc. complete as per manufacturer's specification, conforming to test criteria specified in IS:40201998, Drawings and to the entire satisfaction of engineer-in-charge. |
| 8 | Supplying Pressed steel sheet frames (chowkhat) consisting of 18gauge (1.25 mm thick steel sheet of the specified section, including iron lugs (hold fast) iron hinges conforming to PWD specification including bolts for fixing stops lock notch provision for receiving tower bolts and finished with 1 primer coat approved quality, fixed in position excluding the cost of cement concrete 1:3:6 for fillings in the frame and cement concrete 1:2:4 for lugs complete.(c ) Doors and windows frame of size 151mm x 60mm with 35 mm wide double rebate weighing 3.95 kg per meter. |
| 9 | Kail wood doors shutter and window shutter panelled, glazed or glazed and panelled including hinges screws chokes cleats and cords etc. complete Fixed in position (Single Leaf). (b) 35mm thick -Door Shutter |
| 10 | Wire gauze door shutter with Kail wood without springs housed in chowkats (Single Leaf) a ) 35 mm thick |
| 11 | Supplying Pressed steel sheet frames (chowkhat) consisting of 18gauge (1.25 mm thick steel sheet of the specified section, including iron lugs (hold fast) iron hinges conforming to PWD specification including bolts for fixing stops lock notch provision for receiving tower bolts and finished with 1 primer coat approved quality, fixed in position excluding the cost of cement concrete 1:3:6 for fillings in the frame and cement concrete 1:2:4 for lugs complete.Doors and windows frame of size 113mm x 60mm with 35 mm wide single rebate weighing 3.38 kg per meter. |
| 12 | Hollock wood cup board shutter with plywood panels or faced on both side fixed in position (excluding the cost of handles, bolts hasp with staple but including the labour for fixing them)a) 30 mm thick |
| 13 | Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt)(ii) For shutter area above 0.50 sqm |
| 14 | Cement concrete 1:2:4 (a)With stone ballast or shingle (ii) mixing by mechanical means using concrete mixer volumetric type |
| 15 | Providing and fixing on wall face unplasticisedRigid PVC rain water pipes single socketed (working pressure 4 kgf/cm2) conforming to IS : 4985, including fixing with MS clamps U-PVC pipes working pressure 4 kgf/sqcm) pipe 110 mm dia. |
| 16 | Providing and fixing 110 mm dia. U.P.V.C bendfor Rain water pipe as per IS:14735 includingjointing complete as per specifications and to theentire satisfaction of Engineer- in- charge.(a)UPVC 110 mm bend |
| 17 | Providing and laying vitrified floor tiles indifferent sizes in light colour shades made usingSoluble Salt Technology (thickness to bespecified by the manufacturer) with waterabsorption’s less than 0.08% and conforming toIS : 15622 of approved make in all colours andshades, laid on 20mm thick cement mortar 1:4 (1cement: 4 fine sand), complete. ( Soluble saltPrint Penetration should be up to 1 to 2 mm afterthe tiles are fired & polished ).(a) Size 600x600 mm |
| 18 | Applying pink primer or aluminum primingcoat on wood work including preparation ofsurface knotting and stopping etc. |
| 19 | Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. |
| 20 | Iron Fitting ISI Marked (d) Sliding Bolt 250mm |
| 21 | Cement rendering on plaster 1mm thick |
| 22 | Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled.(a)Doors of area 3 sqm and below. |
| 23 | Dismantling brick work tile, masonry or tilelining(b) In cement |
| 24 | First class burnt brick work laid in cement sandmortar 1:5 in first storey upto 4 metres aboveplinth level |
| 25 | Plastering on walls 6 mm thick cementplaster 1:4( for Cement Grouting) |
| 26 | Cement concrete 1:2:4 gola 10cm x 10cmconcave quadrant along junction of roofs withparapet wall finished smooth, where speciallyspecified. |
| 27 | Scraping (a) White wash and colour wash |
| 28 | White washing (two or more coat) |
| 29 | Distempering with Acrylic washable oil bound distemper (of approved manufacture) two ormore coats on old distempered work when shade is changed |
| 30 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using Acryllic Wall Putty by applying two or more coats to get required finish including priming coat to make an even surface before applying Acrylic wall putty on new plastered surface. Complete as per specifications. |
| 31 | Finishing walls with cement based water soluble exterior paint such as snowecem, robbiacem etc. on old work one coat to give an even shade |
| 32 | Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysJul 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender