|
| 1 | Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material as per S.I. No. 251. |
| 2 | Cement concrete with 4cm gauge approved stone ballast, approved fine sand, cement in the proportion 8:4:1 including supply of all materials, labour and tools and plants etc. required for proper completion of the work. SI No. 281 |
| 3 | M-150 brick work in One part cement and Six part Fine sand in foundation and plinth including supply of all materials, labour & T&P required for proper completion of work as per SI.No. 303 |
| 4 | M-150 brick work in One part cement and Six part Fine sand in superstructure including supply of all materials, labour & T&P required for proper completion of work as per SI.No. 303 & 310. |
| 5 | 12 mm thick plaster with cement and approved course sand in proportion 1:4 over brick work minimum thickness not to be less than 1 cm including supply of all materials labour and T&P etc. required for proper completion of the work SI.NO. 584 |
| 6 | Cement Concrete with 4cm gauge approved stone ballast coarse sand and cement in proporation of 4:2:1 but with 2 cm gauge stone grit instead of 4cm gauge stone ballast including supply of all materials labour and T&P etc for proper completion of work. |
| 7 | R.C.C. Work with cement approved coarse sand and 2cm. gauge approved stone grit in proportion of 1:1.5:3 in plinth beam, tie beam excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I Binding wire and including necessary centering and shuttering etc. and supply of all meterials, labour and T&P etc. required for proper completion of work. Binding wire of supplied by the contractor free of cost as per S.I. No. 283a |
| 8 | R.C.C. Work with cement approved coarse sand and 2cm. gauge approved stone grit in proportion of 1:1.50:3 in suspended floor slab etc excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I Binding wire and including necessary centering and shuttering etc. and supply of all meterials, labour and T&P etc. required for proper completion of work. Binding wire of supplied by the contractor free of cost as per S.I. No. 288. |
| 9 | Mild steel or iron in plain work such as concrete or reinforced brick work (when not included in an over all rates) wrought to required shape as necessary including bending for proper completion of the work. As per S.I. No. 504 of Ch. 10 |
| 10 | Providing and fixing 1mm thich M.S. Sheet door with frame of 40x40x6mm (1½\\"x1½\\"x¼\\") angle iron 3.15 mm (1/8\\") thick M.S. gus set plate at the junction and corners including supply and fixing of necessary fittings. Lock rail of 15\\" length of oxidised iron and including pintels hooks at the top and applying priming coat of red lead paint on all sides complete. As per S.I. No. 517a |
| 11 | Applying Oil Bond distempering/ snowcem with primer coat including supply of all material ,labour and T&P etc.required for proper completion of work |
| 12 | Applying primer coat over new steel and other metal surface after paint including preparing the surface by throughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes fine steel/wood scrappers and paparing and knotting including coat of all and supply of all materials, labour and T&P etc. required for proper completion of work. As per Ch. 15 S.I. No. 20-1(a)+2+3(ii). |
| 13 | Supply and fixing 6 to 8 mm thick ivory or light shades vitrified tiles 600x600 mm size in flooring and skirting with 1:3 approved cement and coarse sand mortar finished with in its cement colour slurry, jointing and polished of approved quality complete including supply of all materials, labour tools and plants etc. required for proper completion of the work as per direction of Engineer-in-charge. As per Ch. 14 S.I. No. 22-5. |
| 14 | Supply and fixing 6 mm thick china glazed tiles of first quality in skiriting or dado ladi with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials, labour and T&P etc. required for proper completion of the work. As per Ch. 14 S.I. No. 628 |
| 15 | P/F white vitoreous china pedestal type water closet squatting pan (Indian type) with seal and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with W.C. pan with ISI marked white solid plastic seat and lid.. As per Ch. 22 S.I. No. 17.1.1 |
| 16 | P/F white vitoreous china pedestal type water closet squatting pan (European type) with seal and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with W.C. pan with ISI marked white solid plastic seat and lid.. As per Ch. 22 S.I. No. 17.3.1 |
| 17 | Providing and fixing white vetreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and One urinal basin with 5 litre white P.V.C. automatic flushing cistern. As per S.I. No. 17.4.1 |
| 18 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : Flat back wash basin of size 630x450mm As per S.I. No. 17.25.1 |
| 19 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. linternal work - Exposed on wall : 15 mm dia. nominal bore. As per S.I. No. 18.10.1 |
| 20 | Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : 15 mm dia. nominal bore. As per S.I. No. 18.11.1 |
| 21 | Providing and fixing brass bib cock of approved quality: 15 mm dia. nominal bore. As per S.I. No. 18.15.1 |
| 22 | Providing and fixing ball valve (brass) of approved quality conforming to IS:8931 15 mm dia. nominal bore. As per S.I. No. 18.18.1 |
| 23 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm dia. nominal bore. As per S.I. No. 18.53.1 |
| 24 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI: 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. As per S.I. No. 18.48 |
| 25 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 100 mm diameter S.W. pipe. As per DSR 19.2.1 |
| 26 | Supply and fixing of 10 cm internal dia A.C. down pipe everest or charminar make complete with bands with door at top and plain at bottom and grating and including supply of necessary M.S. clamps 2.5 cm x 3 mm fixed to walls with and including supply of 10 cm long 6 mm dia Nuts and bolts including washers of required size. all materials, labour and T&P etc. required for proper completion of the work and also including repair of plaster, pointing etc. if damaged during fixing of the pipe PVC pipe, 6 kg/ per sq.cm. pressure 10cm. Dia. As per S.I. No. 730(a). |
| 27 | Cement Concrete with 4cm gauge approved Stone ballast coarse sand and cement in proporation of 12:6:1 inculuding supply of all materail labour and T&P etc.required for proper completion. |
| 28 | Supply & Fixing of 80mm thick precast cement concrete I-shape interloking tils pavers block with top layer of minimum 8mm thickness having plan dimension 200x(160+120mm) of o.p cement smooth high gloss finish skid reditant manufactured from rubber molds through vibro compression mechanism the compressive strength of concrete paver block shall not to be less to than 30MP(M-30) and weigth 5kg per no conferming to IS 15658-2006 with a 4cmthick player of fine sand including supply of all material,labour and T&P etc required for proper completion of work |
| 29 | Wiring points for light with 1.5 sqmm FRLSH PVC insulted copper conductor cable multistrand single core copper conductor cable in PVC conduit pipe partly concealed in wall and partly laid in slab alongwith the reinforcement before concreting, complete with 8 SWG GI earth continuity wire, piano type switch & ceiling rose/angle/batten holder on 3 mm thick phenolic laminated backelite sheet etc. complete in all respect, as directed, including matching colour wash. As per S.I. No. 138(c) Electrical S.O.R. |
| 30 | Wiring points for fan/fresh air fan (light dity exhaust fan) with 1.5 sqmm FRLSH PVC insulted copper conductor cable multistrand single core copper conductor cable in PVC conduit pipe partly concealed in wall and partly laid in slab alongwith the reinforcement before concreting, complete with 8 SWG GI earth continuity wire, piano type switch & ceiling rose/angle/batten holder on 3 mm thick phenolic laminated backelite sheet etc. complete in all respect, as directed, including matching colour wash. As per S.I. No. 140(c) Electrical S.O.R. |
| 31 | Erection and testing of exhaust fan on the existing hole with suitable size of rag bolts, nuts and washers etc. complete in all respect. As per S.I. No. 1120 Electrical S.O.R. |
| 32 | Supply and fixing of fancy type round ceiling fitting made of polycarbonate suitable for and with 1x15/18 watt CFL complete in all respect. As per S.I. No. 450(I) Electrical S.O.R. |
| 33 | Supply and fixing of industrial bulk head fitting with polycarbonate base guard, prismatic reflector silicon gasket suitable for and with 1x18 watt CFL complete in all respect. As per S.I. No. 449 Electrical S.O.R. |
| 34 | S&F surface/flush mounting 8 ways SPN distribution board with additional metal door without MCB complete in all respect, as directed by Engineer in charge. As per S.I. No. 1024(A) Electrical S.O.R. |
| 35 | S&F of 6 Amp. to 32 Amp. MCB (10 KA) C Curve complete in all respect, as directed by Engineer in charge (CAT A). As per S.I. No. 1002 Electrical S.O.R. |
| 36 | S&F of 40 Amp. DP MCB (10 KA) C Curve complete in all respect, as directed by Engineer in charge. As per S.I. No. 1010 Electrical S.O.R. |
| 37 | S&F of single pole MCB blanking plate complete in all respect, as directed by Engineer in charge (CAT B). As per S.I. No. 1034(B) Electrical S.O.R. |
| 38 | Add or less say amount Please Enable Macros to View BoQ information |
