Tender For General-Thunjath Ezhuthachan Malayalam University Vakkad ,Tirur Tharangini Kettidam Partition Wall Work-Tharangini Kettidam Partition Wall Work-General Civil Work
Tender Value
2.85 Lakhs
Estimated cost
Bid Submission
01 Jul 2026
0 days left
EMD
14500
Bank guarantee accepted
Document Fee
700
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Malappuram → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for General-Thunjath Ezhuthachan Malayalam University Vakkad ,Tirur Tharangini Kettidam Partition Wall Work-Tharangini Kettidam Partition Wall Work-General Civil Work
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 25-Jun-2026 | FEE Corrigendum EMD | Fee | 01-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Tharakini kettidam classroom partition work |
| 2 | Steel work for purlin/single section with G I pipes including cutting, hoisting, fixingin position and applying a priming coat of approved steel primer, including weldingand bolted with special shaped washers etc. complete |
| 3 | 26.42.1Providing and fixing two side wall system on Light gauge steel frame workwith cement boards as per standard sizes fixed with self- drilling / taping screws /fasteners @ 60cm c/c of approved make. A groove of 2 mm to 3mm shall bemaintained and grooves shall be sealed with silicon based sealant. The board shall befixed in a staggered pattern. Screws shall be of counter sunk rib head of 1.60mm to 4mm thick or 8 to 10 gauge of length varying from 25 to 45 mm and. proper taping andjointing to be done using fiber mesh tape and epoxy and acrylic based jointingcompound for seamless finish.(cost of frame work to be paid for separately)face:outer face having 12mm thick fiber cement board ,Inner Face: 12 mm thick fibercement board . |
| 4 | 26.42.1subdataAR1 Filling the groove (i.e. 2-3mm gap between boards),taping andjointing of the 12mm thick fiber cement boards with epoxy based sealing compoundor with silicon sealant .Net |
| 5 | Providing and fixing thermal insulation with Resin bonded rock wool conforming toIS: 8183, density 48 Kg/m3, 50mm thick, wrapped in 200 G virgin Polythene bagsplaced over existing false ceiling and held in position by criss - crossing GI wire. |
| 6 | Providing and applying white cement based putty of average thickness 1 mm, ofapproved brand and manufacturer, over the plastered wall surface to prepare thesurface even and smooth complete. |
| 7 | Wall painting with acrylic emulsion paint of approved brand and manufacture to givean even shade:Two or more coats on new work |
| 8 | Aluminium Partition For Teachers Cabin |
| 9 | Providing and fixing aluminium work for doors, windows, ventilators and partitionswith extruded built up standard tubular sections/ appropriate Z sections and othersections of approved make conforming to IS : 733 and IS: 1285, fixing with dashfasteners of required dia and size, including necessary filling up the gaps at junctions,i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.Aluminium sections shall be smooth, rust free, straight, mitred and jointedmechanically wherever required including cleat angle, Aluminnium snap beading forglazing /paneling, C.P. brass/ stainless steel screws, all complete as per architecturaldrawings and the directions of Engineer-in-charge.(Glazing, paneling and dashfasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating50 micron) |
| 10 | For shutters of doors, windows & ventilators including providing and fixinghinges / pivots and making provision for fixing of fittings wherever requiredincluding the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paidfor separately)Powder coated aluminium (minimum thickness of powder coating 50micron) |
| 11 | Providing and fixing glazing in aluminium door, window, ventilator shutters andpartitions etc. with EPDM rubber / neoprene gasket etc. complete as per thearchitectural drawings and the directions of Engineer - in -Charge. ( Cost ofaluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mmthickness (weight not less than 10kg/sqm) |
| 12 | Providing and fixing panelling or panelling and glazing in panelled or panelled andglazed shutters for doors, windows and clerestory windows (Area of opening forpanel inserts excluding portion inside grooves or rebates to be measured), Panellingfor panelled or panelled and glazed shutters 25 mm to 40 mm thick:Particle Board 12 mm thickPre-laminated particle board with decorative laminationon both sides, Grade I, Type II, IS: 12823 marked |
| 13 | Providing and fixing aluminium round shape handle of outer dia 100 mm with SSscrews etc. complete as per direction of Engineer-in-Charge.Polyester powder coatedminimum thickness 50 micron aluminium Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 25, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 01, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedJul 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender