|
| 1 | Ash Slurry Pump, Model: AR 300/550Earlier Pump Serial No. : 15206-15208 |
| 2 | Cat. No. 09000512014 BEARING HOUSING Material: IS 210 FG 260Part No. 3 |
| 3 | Cat. No. 0900051201 END COVER (BEARING CAP OUTER) Material: IS 210 FG 260Part No. 5 |
| 4 | Cat. No. 09000512012 EXPELLER HOUSING Material: ALLOY Cr (280-320 BHN) Part No. 9 |
| 5 | Cat. No. 09000512013 EXPELLERMaterial: NIHARD TYPE IV (550 BHN)Part No. 14 |
| 6 | Cat. No. 09000512005 LABYRINTH (PUMP END)Material: ASTM A 743 CF8Part No. 14P |
| 7 | Cat. No. 09000512006 LABYRINTH (DRIVE END)Material: ASTM A 216 GR WCBPart No. 14D |
| 8 | Cat. No. 09000512017 LANTERN RESTRICTOR Material: ASTM A 743 CF8MPart No. 13 |
| 9 | Cat. No. 09000512015 FLANGE (SUCTION COVER)Material: ASTM A 216 GR WCBPart No. 70 |
| 10 | Cat. No. 09000512026 GREASE RETAINERMaterial: IS 210 FG 260Part No. 7 |
| 11 | Cat. No. 09000512027 SPLIT GLANDMaterial: ASTM A 216 GT.WCBPart No. 10 |
| 12 | Cat. No. 09000512004 PISTON RING (01 Set = 04 Nos.)Material: IS 210 FG 260Part No. 51 |
| 13 | Cat. No. 09000512018 SUCTION COVER Material: ASTM A 216 Gr. WCBPart No. 21 |
| 14 | Cat. No. 09000512008 WEAR PLATE (S.SIDE) WITH INSERT Material: NIHARD TYPE IV (550 BHN) Part No. 19, 19I |
| 15 | Cat. No. 09000512007 WEAR PLATE (B.SIDE) WITH INSERTMaterial: NIHARD TYPE IV (550 BHN)Part No. 16, 16I |
| 16 | Cat. No. 09000512001 SHAFT SLEEVE Material: ASTM A 743 CA 15 Part No. 12 |
| 17 | Cat. No. 09000512002 IMPELLER WITH NUT & BOLTMaterial: NIHARD TYPE IV (550 BHN) Part No. 18 & 38 |
| 18 | Cat. No. 09000512009 OUTER CASING SETOUTER CASING TOP - 01 No.OUTER CASING BOTTOM - 01 No.Material: ASTM A 216 Gr. WCB Part No. 20 & 15 |
| 19 | Cat. No. 09000512029 VARY PITCH PULLEY ASSEMBLY (5 Grooves)Material: IS 210 FG 260 |
| 20 | Overflow Drain Pump, Model : VG 80/250+ARSEarlier Pump Serial No. : 15221-15222 |
| 21 | Cat. No. 09000510012 BEARING CAP-I (BOTTOM)Material: IS 210 FG 260Part No. 37.052 |
| 22 | Cat. No. 09000510003 BEARING HOUSING (TOP) Material: IS 210 FG 260Part No. 36.052 |
| 23 | Cat. No. 09000510005 BEARING CAP –I (TOP)Material: IS 210 FG 260Part No. 37.053 |
| 24 | Cat. No. 09000510013 OIL SEAL Material: SYN RUBBERPart No. 92.152 |
| 25 | Cat. No. 09000510004 BEARING HOUSING (BOTTOM)Material: IS 210 FG 260Part No. 36.053 |
| 26 | Cat. No. 09000510011 LANTERN RINGMaterial: BS 970 EN8Part No. 46.10 |
| 27 | Cat. No. 09000510017 GLAND RINGMaterial: lS 318 GT. LTB 2 Part No. 46.9 |
| 28 | Cat. No. 09000510002 SINGLE SHAFTMaterial: BS 970 EN8Part No. 22.352 |
| 29 | Cat. No. 09000510014 STRAINERMaterial: IS 1239 PART I HEAVY Part No. 63.03 |
| 30 | Cat. No. 09000510010 SHAFT SLEEVE (P.END)Material: AISI 410Part No. 53.5 |
| 31 | Cat. No. 09000510001 IMPELLERMaterial: 27% HICHROMEPart No. 24.2 |
| 32 | Cat. No. 09000510016 WEAR PLATEMaterial: 27% HICHROMEPart No. 14.7 |
| 33 | Cat. No. 09000510008 BUSH HOUSINGMaterial: IS 210 FG 260Part No. 17.3 |
| 34 | Cat. No. 09000510006 BEARING BEDMaterial: IS 210 FG 260Part No. 35.152 |
| 35 | Seal Water Pump, Model : TCH+N 25/180-IEarlier Pump Serial No. : 16882-16883 |
| 36 | Cat. No. 09000511009 SHAFT SLEEVE (P.END)Material: AISI-410Part No. 53.6 |
| 37 | Cat. No. 09000511007 LANTERN RINGMaterial: AISI 410Part No. 46.10 |
| 38 | Cat. No. 09000511015 GLAND SPLIT Material: IS 210 FG 260Part No. 46.4 |
| 39 | Cat. No. 09000511013 OIL SEAL SET (PUMP AND DRIVE END) Material: SYNTHETIC RUBBERPart No. 43.13, 43.3 |
| 40 | Cat. No. 09000511004 BEARING ADOPTER Material: IS 210 FG 260 Part No. 37.21 |
| 41 | Cat. No. 09000511003 BEARING HOUSING Material: IS 210 FG 260Part No. 36.7 |
| 42 | Cat. No. 09000511010 HELICOIL INSERTMaterial: AISI-316Part No. 94.21 |
| 43 | Cat. No. 09000511005 DEFLECTOR RINGMaterial: AISI 304Part No. 51.9 |
| 44 | Cat. No. 09000511001 IMPELLERMaterial: IS 210 FG 260Part No. 24.2 |
| 45 | Cat. No. 09000511002 PUMP SHAFT Material: BS 970 EN8 Part No. 22.3 |
| 46 | Cat. No. 09000511011 STUFFING BOX COVERMaterial: IS 210 FG 260Part No. 17.3 |
| 47 | Drain Sump Pump, Model: VO 80/250+ARSEarlier Pump Serial No. 16522-16528 |
| 48 | Cat. No. 09000510101 BEARING BED Material: IS 210 FG 260Part No. 35.152 |
| 49 | Cat. No. 09000510102 RATCHET COLLAR Material: lS 2062 MS Part No. 53.852 |
| 50 | Cat. No. 09000510103 BEARING COLLAR Material: IS 2062 MS Part No. 53.952 |
| 51 | Cat. No. 09000510104 BEARING HOUSINGMaterial: IS 210 FG 260Part No. 36.052 |
| 52 | Cat. No. 09000510105 LOCK NUT ( BEARING COLLER) Material: SAE 1018/1020Part No. 93.152 |
| 53 | Cat. No. 09000510106 GLAND HOUSING Material: IS 210 FG 260 Part No. 46.3 |
| 54 | Cat. No. 09000510107 LANTERN RING Material: BS 970 EN8Part No. 46.10 |
| 55 | Cat. No. 09000510108 CIRCLIPMaterial: SPRING STEEL Part No. 94.055 |
| 56 | Cat. No. 09000510109 DRIVE SHAFTMaterial: AISI-316Part No. 22.352 |
| 57 | Cat. No. 09000510110 PUMP SHAFT Material: AISI-316Part No. 22.3 |
| 58 | Cat. No. 09000510111 BUSH BEARING (STAR) Material: CUTLESS RUBBER Part No. 55.552 |
| 59 | Cat. No. 09000510112 BUSH BEARING (PUMP) Material: CUTLESS RUBBER Part No. 55.553 |
| 60 | Cat. No. 09000510113 SHAFT SLEEVE (P.END) Material: AISI 410 H (400 BHN)Part No. 53.5 |
| 61 | Cat. No. 09000510114 BUSH HOUSING Material: ALLOY Cr (300 BHN)Part No. 17.3 |
| 62 | Cat. No. 09000510115 WEAR PLATE Material: NIHARD TYPE IVPart No. 14.7 |
| 63 | Cat. No. 09000510116 IMPELLERMaterial: 27% HICHROMEPart No. 24.2 |
| 64 | Ash Slurry Pump, Model: AR 300/750AEarlier Pump Serial No. : 14780-14781 |
| 65 | Cat. No. 09000512003 GLAND HOUSING Material: ALLOY CL (280-320 BHN)Part No. 9 |
| 66 | Cat. No. 09000512005 SHAFT SLEEVE Material: ASTM A 743 CA 40 (550 BHN)Part No. 12 |
| 67 | Cat. No. 09000512022 SUCTION COVER Material : ASTM A 216 Gr. WCBPart No. 21 Please Enable Macros to View BoQ information |
