|
| 1 | Dismantling wrought iron or mild steel work of any description not otherwise provided for |
| 2 | S&F Framed work as in doors Window Grill, Grating, ladder ,Hand rail, or gates of angle or other section using FI Angle iron, square bars, MS plain sheet, grills, gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete.Fe 410 W(Gde)-E-250 Quality-A Complete all as Specified and directed by Engineer-in-charge |
| 3 | S&F in repairs steel rolling shutters thickness of laths in 1mm, without ball bearing as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated complete push pull or manual type |
| 4 | S&F in repairs steel rolling shutters thickness of laths in 1mm, without ball bearing as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated complete gear operated type with bevel gear box and crank handle |
| 5 | S&F Ball bearing for rolling shutters |
| 6 | S&F safety lever locks mild steel with 4 levers for rolling shutters |
| 7 | M&L for preparation of new/old steel surfaces of any descriplain, over 10cm width or girth and applying two coat of anticorrosive epoxy paint over a coat of epoxy primer all as specified and as directed by Engineer-in-charge.Note: Rate is inclusive of errection of scaffolding for working upto 15m height. |
| 8 | M&L preparation of old galvalume roof sheet surfaces of any descriplain and applying one coat of synthetic enamel paint all as specified and as directed by Engineer-in-charge |
| 9 | S&F in repair aluminium powder coated (fancy type) tubular curtain rod, 20mm dia fixing with bracket including a pair of rail brackets fancy type on each ends of rod complete all as specified and as directed by Engineer-in-charge. |
| 10 | Repairs to Steel rolling shutters, any type n. exc 10 Sqm as specified including repair replacement of top cover, anchoring rod, greasing, hasp and staple and making operational by manual including hasp and staple and applying two coat of anti-corrosive epoxy paint over epoxy primer, erected in position as indicated, complete |
| 11 | Repairs to Steel rolling shutters, any type exc 10 Sqm as specified including repair replacement of top cover, anchoring rod, greasing, hasp and staple and making operational by manual or electric including applying two coat of anti-corrosive epoxy paint over epoxy primer, erected in position as indicated, complete |
| 12 | S&F in repairs aluminum powder coated partitions, fully panelled with 12 mm thick both side laminated MDF board in Top & bottom panels fixed with clips,extra aluminium support, aluminium beads, rubber gaskets etc., centre to centre distance of vertical member shall n.exc 1mtr and horizontal members shall n.exc 1.10 mtr using following aluminum powder coated section as mentioned in Jindal Catalogue complete all as specified & as directed by Engineer-in-charge :- (a) SP – 20048 (b) DP - 20047 (c) Glazing clips - 19352 |
| 13 | Dismantling of corrugated steel sheeting of any thickness and pattern complete all as specified and directed by Engineer-in-charge. |
| 14 | S&F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any design/colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws at any height all as specified and as directed by Engineer-in-charge. |
| 15 | S&F Pre painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified. |
| 16 | S&F in repairs collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete |
| 17 | Repairs to collapsible steel gates, top hung, by repalacing rollers or ball bearing, easing, securing, greasing, making fully operational etc., as specified, erected in position and securing runners with holdfasts and brackets, complete Please Enable Macros to View BoQ information |
