|
| 1 | Dismantling of Prestressed / Reinforced cement concrete grade M-20 & above including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres etc. complete as per direction of Engineer-in-charge. |
| 2 | Dismantling of Cement Concrete Grade M-15 & M- 20 including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres etc. complete as per direction of Engineer-in-charge. |
| 3 | Construction of embankment with approved material obtained from borrow pit with all lift & leads, transporting to site by mechanical means within a lead of 5 Kms,spreading, grading to a required slope & compacting to meet requirement of table 300-2 & clause 305 of MoSRT & H specification for Road & Bridge work (AR - 06, P - 157, item no - 35) |
| 4 | Earth work in excavation of fondation in hard soil within the initial lead & lift including dressing & levelling the bed & depositiong the excavated earth away from the site etc. all complete as per the direction of Engineer in Charge. |
| 5 | Filling sand-Supplying & filling good clean river sand of approved quality including watering to complete saturation & ramming complete with all leads & lifts including cost, conveyance, royalty & taxes of all materials & cost of all labour & T&P required for the work etc. complete as per specification & direction of Engineer in charge. |
| 6 | Plain cement concrete M-15 grade in Foundation complete as per drawing and technical specification. |
| 7 | Plain cement concrete M-15 grade in Sub-Structure complete as per drawing and technical specification. |
| 8 | P.C.C work of M-20 grade with 20mm and down grade black hard granite (crusherbroken) stone chips including cost, conveyance, royalty & taxes of all materials & cost of all labour & T&P required for the work etc. complete as per specification & direction of Engineer in charge. |
| 9 | R.C.C work of M-25 grade with 20mm and down grade black hard granite (crusherbroken) stone chips including cost, conveyance, royalty & taxes of all materials & cost of all labour & T&P required for the work etc. complete as per specification & direction of Engineer in charge. |
| 10 | Deck Slab |
| 11 | Abutment/Pier |
| 12 | Parapet wall |
| 13 | Proving R.C.C M-30 Casting in Wearing Coat including cost canveyance rayality & taxes of all materials cost of all labour T&P etc, complete. |
| 14 | Supplying, fitting and placing HYSD bar reinforcement (Fe 500) complete as per drawings and MORD technical specification Clauses 1000,1200 as per direction of the Engineer in charge |
| 15 | Providing & laying of fiter media with Hand Broken aggregates of 45mm size satisfying the requirements laid down in clause 2504.2.2 of MORTH specification to a thickness of not less than 600mm with smaller size towards the soil & bigger size towards the wall & provided over the entire surface behiend abutment, wing wall & return wall to the full height compacted to a firm condition complete as per direction of Engineer - in - charge. |
| 16 | Back filling behind abutment, wing wall and return wall complete as per drawing , Technical Specification and as per direction of Engineer - in - charge. |
| 17 | Providing Weep Holes is Brick Masonry/Paln/Rainforced concrete abutment, wing wall / return wall with 100mm dia AC pipe, extending through the full width of the structure wirh slope of IV:2Htowards drawing force etc, complete. |
| 18 | Construction of un-reinforced, plain cement concrete pavement over a prepared sub base with 43 grade cement @ 400 kg per cum(M 30), coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing and as per Clause 602 of MoSRT&H Specifications for Road & Bridge works (4th Revision) |
| 19 | Reinforced cement concrete M15 grade Guard stone/local stone of standard design as per IRC:25 fixed position including finishing and lettering but excluding painting as per drawing and Technical specification Clause 1704 of MORD.etc complete as per drawing , Technical Specification and as per direction of Engineer - in - charge. |
| 20 | Painting on concrete surface Providing & applying two coats of Weather coat to unplastered concrete surface after cleaning the surface of dirt,dust, oil,grease,efflorescence & applying paint @ of 1lt/2 Sqm etc. complete as per specification & direction of Engineer in charge. Please Enable Macros to View BoQ information |
