|
| 1 | Taking down cement or cement lime plaster on brick walls incl racking out joints hacking for key scrubbing down with water etc and removing the debris outside the MOD land complete all as specified and as directed by Engr -in - Charge. |
| 2 | Demolition of brick or stone masonry built in cement mortar including all necessary arches, quoins, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles. |
| 3 | Material & labour for Brick work with subclass B bricks, straight or curved on plan exc 6.00 mtr mean radius, built in cement mortar 1:4, complete all as specified and as directed by Engr-In-Charge. |
| 4 | Material & labour for rendering CM (1:6) 15 mm thick plaster on other than fair faces of brick work or concrete surfaces etc including finished even and smooth without using extra cement up to four storey height bldg complete all as specified and directed by Engr In Charge. |
| 5 | Material & labour rendering 10mm thick plaster on ceiling in cement mortar 1:3 finished fair and even smooth without using extra cement complete all as specified and directed by Engr In Charge. |
| 6 | Material & labour for rendering 15mm thick plaster on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement all as specified & directed. |
| 7 | Material & labour for preparation of newly plastered or un-plastered surface and applying two coats of distemper oil emulsion on walls over a coat of primer with and including 1mm thick wall care putty on walls complete all as specified and directed by Engr-In-Charge. |
| 8 | M &L for preparing new plaster surface of walls and applying two coats of Cement base paint on walls over a coat of alkali-resistant primer complete all as specified and directed. |
| 9 | Material & labour for preparation of old plastered or un-plastered surfaces of walls and applying two coat of approved shade of oil emulsion distemper including repairing of pot holes and cracks with putty, render plaster where required complete all as specified and directed by Engr-in-Charge. |
| 10 | Material & labour for preparation on old plastered or un-plastered surfaces of walls and applying two coat of exterior Apex/weather coat over a coat of primer any tint (colour as approved by GE) over 1mm thick wall care putty including preparation of surface of wall, band/chajja/balcony up to four storey height building complete all as specified and directed by Engineer in charge. |
| 11 | Dismantling of aluminium door, partition, window & ventilator including all necessary fittings complete all as specified and as directed |
| 12 | Supply & fixing aluminium powder coated any colour (minimum thickness of powder coating 50 micron) for doors, windows, patrician, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed by Engineer-in-Charge. |
| 13 | Supply & fixing aluminium powder coated an (minimum thickness of powder coating 50 micron) as in window and ventilator shutters, sliding type three track, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading screws etc complete all as specified and as directed by Engr-In-Charge. |
| 14 | Supply & fixing for powder coated aluminium doors shutters,( thickness of powder coating not less than 50 micron) aluminium section weighing 0.55 kg/m incl necessary joining cleats, glazing clips, rubber neoprene packing , handles 2 Nos in each door , hinges, anodised aluminium snap beading screws etc. complete all specified and directed by engr-In-Charge. |
| 15 | Supply & fixing brass body Mortice lock, vertical type, size 100 mm 4 lever, incl escutcheon plate and two Nos keys fixed complete all as specified and directed by Engr-in-Charge. |
| 16 | Supply and fix sheet glass 5.5 mm thick of selected quality (tinted glass) exc. 0.5 sqm each fixed to aluminium frame work with necessary rubber beading complete all as specified and directed by Engineer in Charge,. |
| 17 | Supply & fixing in repair aluminium deco grills confirming to DG-104 grade all as specified and directed by Engr-In-Charge. |
| 18 | Supply & fixing in repair aluminium extruded section door closer hydraulically operated designation No-03, universal type, suitable for door shutters of 851 to 1000mm width and of weight of 61 to 80 Kg complete all as specified and directed by Engr In Charge. |
| 19 | Supply & fixing in repair 140mm long floor door stopper of Aluminium alloy body and tongue with hard drawn steel spring complete all as specified and directed by Engr In Charge. |
| 20 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed complete all as specified and directed by Engr In Charge. |
| 21 | Material & labour Glazed ceramic coloured tiles in vertical surface 300X 450X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match incl back plaster 10 mm thick in cm 1:4 complete all as specified and directed by Engr In Charge. |
| 22 | Supply & fixing vitrified ceramic dark shade/double charged/ultra charged/Granite /Marble /wood textures coloured tiles 10mm thick (square/rectangular) polished, area of each tiles exc 0.36 sqm b n exc 0.42 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm th screed bed in cm 1:6 all as specified and directed |
| 23 | All as per item no 22 but on vertical surface of wall such as skirting/dado with and including 10mm thick cement plaster (1:4) as in backing coat of tiles complete all as specified and as directed |
| 24 | Material & labour for Non skid ceramic coloured joint free tiles 7to 8mm thick (square/ rectangular), area of each tiles exceeding 0.11 sqm but n exc 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles, laid over and including cement screed bed 15 mm thick in cement mortar (1:6) laying floor finish complete all as specified and directed. |
| 25 | Supply only liquid water proofing compound only complete all as specified and directed by Engr In Charge. |
| 26 | Demolition of cement concrete in sunken portion in any position not otherwise specifically provided for complete all as specified and as directed by Engineer-in-Charge. |
| 27 | Providing and making fillet of 75mmx75mm in size with cement concrete in 1:2:4 in sunken portion, complete all as specified and directed by Engr In Charge. |
| 28 | Refilling Lime concrete with brick aggregate (Course) in lime mortar1:3, in the sunken with the help of proper tools & equipments & plants complete all as specified and as directed by Engineer-in-Charge. |
| 29 | Sunken treatment, (a) All pipes passing through walls of sunken One No.50 mm dia, 35 cm long medium grade Gl pipe with wire gauge on inside mouth shall be provided to each sunken portion. (b) Clear the sunken/lowered portion of RCC slab surface for full depth of sunken floor by wire brush. Chisel out any mortar sticking the surface.(i) Applying FOSROC Nitoproof 600PF (minimum 0.8 mm dft) over a priming coat of Nitoproof WB Primer or equiyalent product of Asian paints, M/s MC Bauchemie / CIPY / SIKA/ Pidilite Dr Fixit / Thermax / STP applied as per manufacturer's instructions to bottom and fullvertical sides of sunken floors. (ii) Fill it with water and check for dampness and seepage. In case the slightest indication of seepage/leakage is noticed, the same shall be rectified by injection grouting to seal all cracks or application of Polymer modified mortar FOSROC Nitobond SBR or equivalent of M/s MC Bauchemie / CIPY / SIKA / Pidilite Dr Fixit / Asian paints / Thermax/STPadmixed with Integral WPC or cementitious crystalline waterproofing compound in the affected area to seal all cracks and micro cracks if any, and this shall be done by Contractor at his own cost.(iii) Apply additional coat of FOSROC Nitoproof 600 PF or equivalent or Asian paints /M/s MC Bauchemie / CIPY / SIKA/ Pidilite DrFixit / Thermax / STP.All junction points of side walls where CI/GI pipes are passing through shall be sealed with epoxy Cement mortar. |
| 30 | Dismantling of ceiling/ wall panelling including frame work and board complete all as specified and directed by Engr-in-Charge. |
| 31 | Supply & fixing for anodised aluminium snap grid of size 605 x605 mm frame work for false ceiling including straining with GI wire 4 mm dia all as specified and directed. |
| 32 | Supply & fixing for 10 mm thick PVC insulation panels with EPS stuck to 1 mm th plain PVC sheet suitably placed in false celling grid made of aluminium GI/MS as per specification and drawing complete. |
| 33 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering |
| 34 | Supply & fixing Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified and directed by Engr-in-charge. |
| 35 | Supply & fixing Pre-painted galvalume aluminium zinc coating Gi based plain steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof ridge etc fixed with self tapping screws as specified |
| 36 | Supply & fixing steel/work in tubular trusses, purlins, rafters, struts, vertical members and similar work including special shape washers complete using ERW or induction butt welded tubes conforming to IS-1161-1979, grade St-240, Mild Steel plates including dismantling of old steel work complete all as specified and directed by Engr-in-charge. |
| 37 | Material & labour for preparation of new steel surfaces of any description, not other wise described, over 10 cm width or girth and applying two coats synthetic enamel paint over a coats of red oxide primer as specified and directed by Engr-in-charge. |
| 38 | Taking down steel tubing or removing from site of 15 mm bore pipe all as specified and directed by Engineer-in-charge. |
| 39 | Taking down steel tubing or removing from site of 20 mm bore pipe all as specified and directed by Engineer-in-charge. |
| 40 | Supply & fixing for 15 mm bore steel water tubing medium grade , galvanized ISI marked with all fittings fixed to wall & ceiling or laid in floors complete all as specified and directed by Engineer-in-charge. |
| 41 | Supply & fixing for 20 mm bore steel water tubing medium grade , galvanized ISI marked with all fittings fixed to wall & ceiling or laid in floors complete all as specified and directed by Engineer-in-charge. |
| 42 | Dismantling water tanks exc 500 but not exc 1000 ltrs capacity and removing to store complete all as specified and directed by Engr In Charge. |
| 43 | Supply & fixing Rotational moulded polyethylene 1000 Ltr water storage tanks as per IS (cylindrical vertical with closed top) hoisted and fixed in position including necessary fittings complete all as specified and as directed by Engr-in-Charge. |
| 44 | S &F in repair 20 mm dia Ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed by Engr In Charge. |
| 45 | Supply & fixing in repair 20 mm bore Gun Metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed |
| 46 | Taking down rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed by Engr In Charge. |
| 47 | Supply & fixing for 75 mm dia pvc pipe Stack clamps out of 50 mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof as per complete all as complete all as specified and directed by Engr In Charge. |
| 48 | Supply & fixing for 110 mm dia pvc pipe Stack clamps out of 50 mm by 5mm flat iron and 16mm dia round iron stays,enlcuding bolts and nuts and securing ends of stays to wall or roof as per complete all as specified and directed by Engr In Charge. |
| 49 | Supply & fixing for 200 mm dia pvc pipe Stack clamps out of 50 mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof as per complete all as specified and directed by Engr In Charge. |
| 50 | Supply & fixing for PVC SWR bends 110 mm complete all as specified and directed by Engr In Charge. |
| 51 | Supply & fixing PVC SWR bends 75 mm complete all as specified and directed by Engr In Charge. |
| 52 | Supply & fixing PVC SWR bends 200 mm complete all as specified and directed by Engr In Charge. |
| 53 | Supply & fixing PVC (SWR) pipes 110 mm single socketed, in any length with solvent cement joints fixed to walls/laid in floors complete all as specified and directed by Engr In Charge. |
| 54 | Supply & fixing PVC (SWR) pipes 75 mm single socketed, in any length with solvent cement joints fixed to walls/laid in floors complete all as specified and directed by Engr In Charge. |
| 55 | Supply & fixing PVC (SWR) pipes 200 mm single socketed, in any length with solvent cement joints fixed to walls/laid in floors complete all as specified and directed by Engr In Charge. |
| 56 | Supply & fixing in repair PVC SWR Junction piece (Single T) 75 mm provided with access door equal or unequal complete all as specified and directed by Engr In Charge. |
| 57 | Supply & fixing in repair PVC SWR Junction piece (Single T) 110 mm provided with access door equal or unequal complete all as specified and directed by Engr In Charge. |
| 58 | Supply & fixing in repair 5.5mm thick fancy looking mirror of selected quality glass, size 6x3 fit, mounted on wall with wooden plugs with chromium plated brass screw and SS cap washers, including moulding of edges with smoothly complete all as specified and as directed by Engr-in-charge. |
| 59 | Supply & fixing in repairs 15mm CP bib tap, fancy type, cast copper alloy with crutch or butterfly handle , screwed down, screwed for iron pipe etc complete all as specified and directed by Engr In Charge. |
| 60 | Supply & fixing in repairs CP Soap dish of Make-AQN-7731 of Jaquar MARC/GEM/PARKO Or Equivalent complete all as specified and as directed by Engineer-in-Charge. |
| 61 | Supply & fixing in repairs 15mm bore two way angle valve, brass, chromium plated with wall flange and fancy type high pressure screwed down with CP flange complete all as specified and as directed by Engineer-in-Charge. |
| 62 | Supply & fixing in repairs PTMT grating round of 100mm dia (Minimum wt 50gms) complete all as specified and as directed by Engineer-in-Charge. |
| 63 | Supply & fixing in repairs PTMT grating with waste hole (Minimum wt 100 gms) complete all as specified and as directed by Engineer-in-Charge. |
| 64 | Material & labour for coloured Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking plat forms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling of old tiles complete all as specified and as directed by Engineer-in-Charge. |
| 65 | Supply & fixing in repairs Vitreous China wash basin white oval shape counter top of size 630x450mm including CP brass best quality Pillar Cock complete all as specified and as directed by Engineer-in-Charge. |
| 66 | Supply & fixing in repairs 32 mm dia Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap complete all as specified. |
| 67 | Supply & fixing in repairs CP waste coupling 32 mm size half threaded with 130mm height completed as of complete all as specified and as directed by Engineer-in-Charge. |
| 68 | Supply & fixing in repairs for 15 mm bore angle valve, brass, chromium plated with wall flange and fancy type with high pressure screwed down with CP flange complete all as specified and as directed by Engineer-in-Charge. |
| 69 | Supply & fixing in repairs for one piece wall mounted Vitreous China wash down water closet pan, white (including fixing bolts, Push cock flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe, Plastic water closet seat, black / white , closed pattern with flat bottom, jet spray with necessary fixing and cover and mild steel chromium plated or aluminised hinging device etc. complete all as specified and as directed by Engineer-in-Charge. |
| 70 | Supply & fixing in repair vitreous china squatting pan white Orissa patern size 580x440mm with integral foot rests (excluding flushing cistern & flush pipe) inclusion of provision of cement concrete bedding , P trap 100 dia connection to trap and flushing pipe, anti syphonage complete all as specified and as directed. |
| 71 | Supply and fix in repairs vitreous china urinals of including all necessary fittings etc complete all as specified and directed. |
| 72 | Supply & fixing in repairs for health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 73 | Supply & fixing in repairs for CP towel ring of approved make complete all as specified and as directed by Engineer-in-Charge. |
| 74 | Supply & fixing in repairs for CP connection 15mm size for Hot & Cold water with CP nuts of length 450mm long complete all as specified and as directed by Engineer-in-Charge. |
| 75 | Taking down Chowkats or frames with shutters (without taking off shutters from the frame) area exc 1.5 sqm and not n.exc 4.0 sqm (including make good with CM 1:4 and hold fast) complete all as specified and directed by Engr In Charge. |
| 76 | Supply & fixing factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 andresistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed by Engr In Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance indimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 77 | Supply & fixing Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900N (Edge),minimumcompressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed by Engr In Charge. (Note: butt hinges and necessary screws shall be paid separately) |
| 78 | Supply and fixing butt hinges 100 mm medium weight cold rolled mild steel complete all as specified and directed by Engr In Charge. |
| 79 | Supply & fixing aluminium anodised barrel tower bolts extruded section of size 200 mm, complete all as specified and directed by Engr In Charge. |
| 80 | Supply & fixing aluminium handle extruded fabricate type anodised of size 150 mm complete all as specified and directed by Engr In Charge. |
| 81 | Demolition of cement concrete in ground floor and paving n/exe 15 cm thick below or above G/L complete all as specified and directed by Engr In Charge. |
| 82 | Material & labour for chequered cement concrete tiles glossy finish 30cm x30cmx25mm with grey cement and pigment , set , jointed and pointed in neat cement slurry in floors laid over and including 15 mm thick screed bed in cm 1:6 including dismantling of old tiles complete all as specified and directed by Engr In Charge. |
| 83 | Material & labour for Machine pressed precast concrete coloured interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 Grade - With Grey Cement and pigment including dismantling of old tiles complete all as specified and directed by Engr In Charge. |
| 84 | Material & labour Cement concrete type D2 1:4:8 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete, floor sub base etc. surface fair finished even & smooth without using extra cement complete all as specified and directed by Engr In Charge. |
| 85 | Material & labour for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engr In Charge. |
| 86 | Material & labour for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in coping etc complete all as specified and directed by Engr In Charge. |
| 87 | Demolition reinforced cement concrete of roofs, floors (other than ground floors), beams, staircases, landing, chajjas, RCC Jali and similar suspended work (reinforcement cut as required to facilitate demolition) complete all as specified and directed by Engineer-in-Charge. |
| 88 | Material & labour RCC M-25 using 20 mm graded aggregate as in slab, shelves, cover etc complete all as specified and directed by Engr-In-Charge. |
| 89 | Material & labour formwork to chullah hoods, chajjas, slab, column, beam, trough and similar items including edges finished rough surfaces of concrete complete all as specified and directed by Engr-In-Charge. |
| 90 | Supply & fixing mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire(annealed) not less than 0.9mm dia complete all as specified. |
| 91 | Material & labour for removing building materials etc. (other than spoil payable under items 03028 to 03031 in Section-3—Earthwork of SSR) to a distance of 10 km, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed by Engineer-in-Charge. |
| 92 | Material & labour for guiniting work to RCC work in column, chajjas, balconies, slabs, landings etc by removing loose, concrete, incl removing rust with short blasting and cleaning of surface with wire brush and applying epoxy treatment to rusted reinforcement and including Supply & fixing welded wire mess fabric or wire not less than 95x95x3mm adhesive plaster grade for concrete admixture and providing guniting pressure 2.00/2.50 Kg/Sq cm with admixture 1 part of cement and 3.50 part of sand and thickness 50mm average and making the surface even and smooth including necessary formwork and 10mm thick with CM 1:4 plaster over repaired surface with WPC complete all as specified and directed by Engr-in-Charge. |
| 93 | Taking down carefully copper/aluminium point wiring light, fan, light fittings, socket or power complete, such as switches, ceiling roses, pendants, regulators, sockets etc. Removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditioned separately) and making good disturbed surface of walls, floors etc. complete all as specified and directed by Engineer-in-Charge Please Enable Macros to View BoQ information |
| 94 | Taking down carefully copper/aluminium point wiring light, fan, light fittings, socket or power complete, such as switches, ceiling roses, pendants, regulators, sockets etc. Removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditioned separately) and making good disturbed surface of walls, floors etc. complete all as specified and directed by Engineer-in-Charge Please Enable Macros to View BoQ information |
