Tender For Repair /Maintenance Of Nc Sewage Pump Sets Including Starters, Panel & Cables Of Sewage Installations In East And West Of Jhoke Road And Repair/Meintenance Of Dg Sets & Other Allied Works Of Sewage And Water Supply Installations Under Ge (
Tender Value
Ref. Documents
Estimated cost
Bid Submission
20 Jul 2026
17 days left
EMD
1.80 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Firozepur → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair /Maintenance Of Nc Sewage Pump Sets Including Starters, Panel & Cables Of Sewage Installations In East And West Of Jhoke Road And Repair/Meintenance Of Dg Sets & Other Allied Works Of Sewage And Water Supply Installations Under Ge (West) Ferozepur
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of defective centrifugal sewage motor complete of capacity 5 HP-10 HP by removing cable connection from LT panel and taking out carefully from sewage sump well and inspect the same, transporting to repair workshop for repair. Reassembling after repair and testing, transporting back to sewage well re-installation by connecting electric cable to LT panel and testing complete all as specified and directed. Note :-(i) The cost also includes for making stand by arragnment to avoid any type of breakdown by putting standby motor/pumpset all as directed by Engr-in-charge. (ii)Minor Items costing up to RS 300/- i.e gland packing, Nuts bolts , insulation tape, Rubber seal, Hozing bushes etc required are deemed to be included in unit rate of above item. (iii) spares parts required for repair will be measured and paid under relevent item of Sch 'A' as supply only. (iv) Labour required for dismantling the defective pump set for removing of defective spare parts and re-assembling after fixing new spares are deemed to be included in unit rate of above item. (v) Cont.will send daily his rep to E/M yard for getting complaint, after getting complaint contracter will rectified bottleneck with in 24 Hrs if fail for any reason,a fine of Rs 1500/- per day |
| 2 | Supply only deep groove ball bearing suitable for 5 to 10 HP Motor complete all as specified and directed. |
| 3 | Supply only PVC fan complete suitable for 5 to 10 HP motor complete all as specified and directed. |
| 4 | Supply only shaft complete suitable for 5 to 10 HP motor complete all as specified and directed. |
| 5 | Supply only coupling set complete suitable for 5 to 10 HP motor complete all as specified and directed. |
| 6 | M&L for rewinding of centrifugal electric motor cap 5-10 HP with super enameled copper winding wire make HTP/Devi Dyal of same size/ gauge as existing after providing 'F' class insulation material and varnishing complete all as specified. Note : Contracter will give Warranty of rewinded motor for at least 3 months minimum. |
| 7 | All as per item No 1.00 here in before but for capacity of 20 HP Motor |
| 8 | Supply only deep groove ball bearing suitable for 20 HP Motor complete all as specified and directed. |
| 9 | Supply only coupling set complete suitable for 20 HP motor complete all as specified and directed. |
| 10 | M&L for rewinding of centrifugal electric motor cap 20 HP with super enameled copper winding wire make HTP/Devi Dyal of same size/ gauge as existing after providing 'F' class insulation material and varnishing complete all as specified. Note : Contracter will give Warranty of rewinded motor for at least 3 months minimum. |
| 11 | All as per item No 1.00 here in before but for capacity 30 HP Motor. |
| 12 | Supply only deep groove ball bearing suitable for 30 HP Motor complete all as specified and directed. |
| 13 | Supply only PVC fan complete suitable for 30 HP motor complete all as specified and directed. |
| 14 | Supply only coupling set complete suitable for 30 HP motor complete all as specified and directed. |
| 15 | M&L for rewinding of centrifugal electric motor cap 30 HP with super enameled copper winding wire make HTP/Devi Dyal of same size/ gauge as existing after providing 'F' class insulation material and varnishing complete all as specified. Note : Contracter will give Warranty of rewinded motor for at least 3 months minimum. |
| 16 | All as per item No 1.00 here in before but for capacity 40 HP Motor. |
| 17 | Supply only deep groove ball bearing suitable for 40 HP Motor complete all as specified and directed. |
| 18 | Supply only shaft complete suitable for 40 HP motor complete all as specified and directed. |
| 19 | Supply only coupling set complete suitable for 40 HP motor complete all as specified and directed. |
| 20 | M&L for rewinding of centrifugal electric motor cap 40HP with super enameled copper winding wire make HTP/Devi Dyal of same size/ gauge as existing after providing 'F' class insulation material and varnishing complete all as specified. Note : Contracter will give Warranty of rewinded motor for at least 3 months minimum. |
| 21 | All as per item No 1.00 here in before but for capacity 50 HP - 60 HP pump set. |
| 22 | Supply only deep groove ball bearing suitable for 50 HP - 60 HP Motor complete all as specified and directed. |
| 23 | Supply only shaft complete suitable for 50 HP - 60 HP motor complete all as specified and directed. |
| 24 | Supply only coupling set complete suitable for 50 HP motor complete all as specified and directed. |
| 25 | M&L for rewinding of centrifugal electric motor cap 50 HP - 60 HP with super enameled copper winding wire make HTP/Devi Dyal of same size/ gauge as existing after providing 'F' class insulation material and varnishing complete all as specified. Note : Contracter will give Warranty of rewinded motor for at least 3 months minimum. |
| 26 | Dismantling of defective centrifugal sewage pump for inspection and identification of serviceable and unserviceable parts for repair and overhauling and reassembling after replacement of unserviceable parts suitable for 5-10 HP pumpset by dismantling of suction & delivery pipe lines and taking out carefully, transporting to workshop for repair. Reassembling after repairs and testing, re-installation by connecting suction & delivery pipe line and testing complete all as specified and directed. Note :- Minor Items ie gland packing ,Nut bolts insulation tape and greasing , rubber gasket etc. required are deemed to be included in unit rate of above item. (i) Spare parts required for repair will be measured and paid under relevant item of seh “A” as supply only. (ii) Labour required for dismantling the pump set for removing defective spare parts and re-assembling after fixing new spares are deemed to be included in unit rate of above item. (iii) Cont will send daily his rep to yard for getting complaint, after getting complaint contracter will rectified bottelnecks with in 24 Hrs if fail for any reason,a fine of Rs 1500/- per day |
| 27 | Supply only impeller suitable for 5-10 HP pump complete all as specified and directed. |
| 28 | Supply only parallel key suitable for 5-10 HP pump complete all as specified and directed. |
| 29 | Supply only sleeve suitable for 5-10 HP pump complete all as specified and directed. |
| 30 | Supply only deep groove ball bearing suitable for 5-10 HP pump complete all as specified and directed. |
| 31 | Supply only mechanical seal suitable for 5-10 HP pump complete all as specified and directed. |
| 32 | All as per item No 26 here in before but suitable for 20 HP pump complete all as specified and directed. |
| 33 | Supply only impeller suitable for 20 HP pump complete all as specified and directed. |
| 34 | Supply only parallel key suitable for 20 HP pump complete all as specified and directed. |
| 35 | Supply only sleeve suitable for 20 HP pump complete all as specified and directed. |
| 36 | Supply only deep groove ball bearing suitable for 20 HP pump complete all as specified and directed. |
| 37 | Supply only mechanical seal suitable for 20 HP pump complete all as specified and directed. |
| 38 | All as per item No 26 here in before but suitable for 30 HP pump complete all as specified and directed. |
| 39 | Supply only impeller suitable for 30 HP pump complete all as specified and directed. |
| 40 | Supply only parallel key suitable for 30 HP pump complete all as specified and directed. |
| 41 | Supply only sleeve suitable for 30 HP pump complete all as specified and directed. |
| 42 | Supply only deep groove ball bearing suitable for 30 HP pump complete all as specified and directed. |
| 43 | Supply only mechanical seal suitable for 30 HP pump complete all as specified and directed. |
| 44 | All as per item No 26 here in before but suitable for 40 HP pump complete all as specified and directed. |
| 45 | Supply only impeller suitable for 40 HP pump complete all as specified and directed. |
| 46 | Supply only parallel key suitable for 40 HP pump complete all as specified and directed. |
| 47 | Supply only sleeve suitable for 40 HP pump complete all as specified and directed. |
| 48 | Supply only deep groove ball bearing suitable for 40 HP pump complete all as specified and directed. |
| 49 | Supply only mechanical seal suitable for 40 HP pump complete all as specified and directed. |
| 50 | All as per item No 26 here in before but suitable for 50 HP-60 HP pump complete all as specified and directed. |
| 51 | Supply only impeller suitable for 50 HP - 60 HP pump complete all as specified and directed. |
| 52 | Supply only parallel key suitable for 50 HP - 60 HP pump complete all as specified and directed. |
| 53 | Supply only sleeve suitable for 50 HP-60 HP pump complete all as specified and directed. |
| 54 | Supply only deep groove ball bearing suitable for 50 HP - 60 HP pump complete all as specified and directed. |
| 55 | Supply only mechanical seal suitable for 50 HP - 60 HP pump complete all as specified and directed. |
| 56 | Dismantling of defective Submersible sewage motor pumpset of capacity 5 HP by removing cable connection from LT panel and suction & delivery pipe lines and taking out carefully, tranporting to workshop for repair. Reassembling after repairs and testing, transporting back to sewage well reinstallation and fixed the suction & delivery pipe line , and connecting electric cable to LT panel and testing complete all as specified and directed. Note :-(i) The cost also includes for making stand by arragnment to avoid any type of breakdown by putting standby motor/pumpset all as directed by Engr-in-charge. (ii)Minor Items costing up to RS 300/- i.e gland packing, Nuts bolts , insulation tape, Rubber seal, Hozing bushes etc required are deemed to be included in unit rate of above item. (iii) spares parts required for repair will be measured and paid under relevent item of Sch 'A' as supply only.(iv) Labour and tpt required for dismantling defective pump set for removing of defective spare partsand re-assembling after fixing new spares are deemed to be included in unit rate of above item. (v) Cont will send daily his rep to yard for getting complaint, after getting complaint contracter will rectified bottelnecks with in 24 Hrs if fail for any reason,a fine of Rs 1500/- per day |
| 57 | Supply only rotor with shaft complete suitable for 5 HP motor complete all as specified and directed. |
| 58 | Supply only lower bearing complete suitable for 5 HP motor complete all as specified and directed. |
| 59 | Supply only upper bearing complete suitable for 5 HP motor complete all as specified and directed. |
| 60 | Supply only mechanical seal complete suitable for 5 HP pump complete all as specified and directed. |
| 61 | Supply only impeller complete suitable for 5 HP pump complete all as specified and directed. |
| 62 | M&L for rewinding of submersible electric motor cap 5 with PVC insulated copper wire of existing size/guage make HTP/ Devi Dyal/National including insulation material complete all as required. Note : Contracter will give Warranty of rewinded motor for at least 3 months minimum. |
| 63 | All as per item No 56 here in before but suitable for 7.5 HP motor pumpset complete all as specified and directed. |
| 64 | Supply only rotor with shaft complete suitable for 7.5 HP motor complete all as specified and directed. |
| 65 | Supply only lower bearing complete suitable for 7.5 HP motor complete all as specified and directed. |
| 66 | Supply only upper bearing complete suitable for 7.5 HP motor complete all as specified and directed. |
| 67 | Supply only mechanical seal complete suitable for 7.5 HP pump complete all as specified and directed. |
| 68 | Supply only impeller complete suitable for 7.5 HP pump complete all as specified and directed. |
| 69 | M&L for rewinding of submersible electric motor cap 7.5 with PVC insulated copper wire of existing size/guage make HTP/ Devi Dyal/National including insulation material complete all as required. Note : Contracter will give Warranty of rewinded motor for at least 3 months minimum. |
| 70 | All as per item No 56 here in before but suitable for 25 HP motor pumpset complete all as specified and directed. |
| 71 | Supply only shaft complete suitable for 25 HP motor complete all as specified and directed. |
| 72 | Supply only lower bearing complete suitable for 25 HP motor complete all as specified and directed. |
| 73 | Supply only upper bearing complete suitable for 25 HP motor complete all as specified and directed. |
| 74 | Supply only mechanical seal complete suitable for 25 HP pump complete all as specified and directed. |
| 75 | Supply only impeller complete suitable for 25 HP pump complete all as specified and directed. |
| 76 | M&L for rewinding of submersible electric motor cap 25 HP with PVC insulated copper wire of existing size/guage make HTP/ Devi Dyal/National including insulation material complete all as required. Note : Contracter will give Warranty of rewinded motor for at least 3 months minimum. |
| 77 | All as per item No 56 here in before but suitable for 15HP to 17.5 motor pumpset complete all as specified and directed. |
| 78 | Supply only shaft complete suitable for 15HP to 17.5 HP motor complete all as specified and directed. |
| 79 | Supply only lower bearing complete suitable for 15HP to 17.5 HP motor complete all as specified and directed. |
| 80 | Supply only upper bearing complete suitable for15HP to 17.5 HP motor complete all as specified and directed. |
| 81 | Supply only mechanical seal complete suitable for 15HP to 17.5 HP pump complete all as specified and directed. |
| 82 | Supply only impeller complete suitable for 15HP to 17.5 HP pump complete all as specified and directed. |
| 83 | M&L for rewinding of submersible electric motor cap 15HP to 17.5 HP with PVC insulated copper wire of existing size/guage make HTP/ Devi Dyal/National including insulation material complete all as required. Note : Contracter will give Warranty of rewinded motor for at least 3 months minimum. |
| 84 | S&F in replacement of sheet metal enclosure type change over switch on load front handle four pole 415 volts 50 Hz 200 Amps including mounting arrangement of metallic frame work of appropriate section and size on walls or panels complete all as specified and as directed. Make:- Havells/L&T/C&SNote:- Making connections to the electric system, including cutting of cable of any size and type, making end termination by using suitable lugs is included in the rate quoted under this item. |
| 85 | Supply Battery Copper cable Black with plug complete (1 Mtr Length). |
| 86 | S&F of Submersible Copper cable 3 core, 6 sqmm including lowering/lifting of submersible pump set |
| 87 | S&F of Submersible Copper cable 3 core, 10 sqmm including lowering/lifting of submersible pump set |
| 88 | S&F of Submersible Copper cable 3 core, 16 sqmm including lowering/lifting of submersible pump set. |
| 89 | S&F of Submersible Copper cable 3 core, 25 sqmm including lowering/lifting of submersible pump set |
| 90 | Replacement of Fully automatic star delta starter type MUG 30, suitable for 30 HP Submersible pumps/ motor 415 volts, 50 Hz with relay range 23-33 Amps in sheet metal enclosure with Voltmeter/Ameter CT's, short circuit protection, auto unit, single pahse preventer IP55 box & selecter switch. |
| 91 | S & F in Replacement of Fully automatic star delta starter type MUG 40 FASD, suitable for 40 HP pumps/ motor 415 volts, 50 Hz with relay range 36-60 Amps in sheet metal enclosure with Voltmeter/Ameter CT's, short circuit protection, auto unit, single pahse preventer IP55 box & selecter switch. |
| 92 | S & F in Replacement of Fully automatic star delta starter type MUG 20 FASD suitable for 20 HP pumps/ motor 415 volts, 50 Hz with relay range 20-33 Amps in sheet metal enclosure with Voltmeter/Ameter CT's, short circuit protection, auto unit, single pahse preventer IP55 box & selecter switch. |
| 93 | S & F in Replacement of Fully automatic star delta starter type MUG 15, suitable for 20 HP pumps/ motor 415 volts, 50 Hz with relay range 13-22 Amps in sheet metal enclosure with Voltmeter/Ameter CT's, short circuit protection, auto unit, single pahse preventer IP55 box & selecter switch. Make:- Cat No. SS 95975 of L&T or equipment in Seimens/MEI/BCH. |
| 94 | Supply & Fixing LED Bldg security light 45 watts,pressure die cast aluminium housing,heat resistane toughened glass with frame,IP 66 protection with bracket (for housing street light fittings) made of GI pipe 40 mm dia light grade 1.20 mtrs long duly cutted and welded at an angle of 120 degree and fixed to wall with 50 mm X 6 mm MS clamps - 02 Nos with 16 mm dia bolts,nuts,and washers complete all as specified and directed incl taking down of old unserviceable fitting of any type.. |
| 95 | Supply & Fixing LED flood light fitting 100 watts,pressure die cast aluminium housing,heat resistane toughened glass with frame,IP 66 protection with bracket for housing floo light fittings complete all as specified and directed incl taking down of old unserviceable fitting of any type |
| 96 | Supply only three phase volt meter 0-520 volts 96x96mm flush mounting analogue type comlete with inbuilt selector switch. |
| 97 | Supply only three phase Ammeter 0-100 Amps 96x96mm flush mounting analogue type CT operated of CT ratio 100/5 Amps complete with selector switch. NOTE:- CT 100/5 Amps will be measured and paid separatly under relevant item of Sch. |
| 98 | Supply only LED cluster indicator lamp Red, Blue, Yellow. |
| 99 | Supply,Laying, testing in replacement of UG cable XLPE insulated, screened, PVC bedded galvanized steel strip armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross section area 95 sqmm 3.5 core complete all as specified. |
| 100 | All as per item No 81 here-in-before but for 70 Sqmm 3.5 Core complete all as specified and directed. |
| 101 | All as per item No 81 here-in-before but for 50 Sqmm 3.5 Core complete all as specified and directed. |
| 102 | All as per item No 81 here-in-before but for 16 Sqmm 4 Core complete all as specified and directed. |
| 103 | S&F MCCB 4 Pole, 415 V, Adjustable type, 250 Amps with breaking capacity 36 KA all as specified and directed. |
| 104 | S&F MCCB 4 Pole, 415 V, Adjustable type, 200 Amps with breaking capacity 36 KA all as specified and directed. |
| 105 | Supplying and fixing MCCB, 100 Amps, 3 pole, 415 Volts, AC supply, having breaking capacity Icu = 25 KA with fixed thermal & magnetic setting with sheet metal enclosure of suitable size all as directed . Make : L&T / Siemens/ ABB/Legrand |
| 106 | S&F in replacement moulded case circuit breakers 4 pole 100 Amps having breaking capcity 16 KA at 415 volts of Make L&T or equivalent in Havell's/Siemens |
| 107 | S&F in replacement moulded case circuit breakers 4 pole 63 Amps having breaking capcity 16 KA at 415 volts of Make L&T or Equivalent in Havells / Siemens . |
| 108 | M&L for cleaning of sewage sump of any depth and capacity including removal of sewage water, sludge, silt, floating refuse and deposited filthy matter from bottom and sides of sump by manual/mechanical means, dewatering, scraping complete. The work includes taking out sludge in buckets/drums, loading, transporting and disposing off the same to outside Defence land as directed by Engineer-in-Charge.The item shall also include providing all labour, T&P, pumps, suction pumps, hoses, ladders, lighting arrangements, gas detector, ventilation equipment, PPE/safety appliances such as gumboots, gloves, masks, safety belts, oxygen support and disinfectants/bleaching powder required for execution of work in confined space conditions complete.Contractor shall ensure compliance of safety precautions for confined space entry and prevention of toxic gas hazards. Nothing extra shall be paid for dewatering, temporary pumping arrangements, disposal of sludge, cleaning materials, safety arrangements and all incidental works necessary for satisfactory completion. |
| 109 | Shifting of Motor coupled Centrifugal Pumpset of any Capacity into Sumpwell including Machining, Forming, welding works alongwith its Dismantling, removing cable connection, Lowering, Reassembling, cable jointing and testing all as specified and directed. |
| 110 | Supply and fix in repair for cast iron sluice valve suitable for 150mm bore CI pipe flanged type, class PN-1.6 with brass spindle both ends flanged conforming to IS 14846 , including jointing with rubber insertion sheet 3mm thick, bolts, nuts & washers complete all as specified and directed . Make Kirlosakar/leader/ Kartar/BIR |
| 111 | S&F in repair Non Return valve R/Flap FL duly ISI marked and both ends flanged of 200 mm bore, conforming to BIS 5312 including jointing with rubber insertion sheet 3mm thick, bolts, nuts & washers complete all as specified and directed fixed in repair complete. Make Kirlosakar/leader/ Kartar/BIR |
| 112 | S&F in repair Non Return valve R/Flap FL duly ISI marked and both ends flanged of 150 mm bore, conforming to BIS 5312 including jointing with rubber insertion sheet 3mm thick, bolts, nuts & washers complete all as specified and directed fixed in repair complete. Make Kirlosakar/leader/ Kartar/BIR |
| 113 | S&F in repair Non Return valve R/Flap FL duly ISI marked and both ends flanged of 100 mm bore, conforming to BIS 5312 including jointing with rubber insertion sheet 3mm thick, bolts, nuts & washers complete all as specified and directed . Make Kirlosakar/leader/ Kartar/BIR |
| 114 | M&L in repalcement of rusted/unserviceable MS clamp of suitable size with nut,bolts & washers complete for hanging of submersible pump set with column pipes in bore well any size/cap and MS Cap of suitable size as casing cover of bore well complete all as directed by Engr-in Chrge |
| 115 | M & L in replacement of Cast iron specials, ISI marked such as bends (any type, radius and angle) tapers any type, (straight, bend, increasing,decreasing or double socket etc.) Tee piece single branch.\\"Y\\" junction,double branch,cross(all sockets or socket and spigot collars,caps and plugs upto 300 mm bore. |
| 116 | Material & labour earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of the earth plate at a depth not less than 1.5 metre below ground level, earth plate surrounded by 15cm thick and packed with layers of charcoal dust and common salt, earth electrode GI strip 25 x 4mm dia connected to GI earth plate electrode by means of bolts, nuts, check nuts and washers of galvanized iron and thimbles and other end of earth wire connected to main switch board and protected by galvanized iron light grade 40mm bore and GI pipe 20mm bore medium grade with funnel and wire mesh for watering including necessary excavation and earth works. PCC chamber in cement concrete (1:3:6) type C-2 using graded stone aggregate and RCC cover in M-25 (Design mix) and all as shown in Electrical Plate No. 3 of MES Schedule (Part-I) of 2009 complete all as specified and directed. |
| 117 | M& L for color code painting over the complete CI pipe line of Sewage Pump House with two coats of Black synthetic enamel paint after one coats of red synthetic enamel paint complete all as specified and directed. |
| 118 | M& L for MS black column pipe heavy duty coated with black water proof enamel paint both ends flaged suitable for lowering of submersible pump, 10 feet in length of 150mm dia as per IS 1239 (I) complete all as directed. |
| 119 | M& L for MS black column pipe heavy duty coated with black water proof enamel paint both ends flaged suitable for lowering of submersible pump, 10 feet in length of 100mm dia as per IS 1239 (I) complete all as directed. Please Enable Macros to View BoQ information |
| 120 | M& L for MS black column pipe heavy duty coated with black water proof enamel paint both ends flaged suitable for lowering of submersible pump, 10 feet in length of 100mm dia as per IS 1239 (I) complete all as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysJul 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender