|
| 1 | Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m depth for foundation etc or for shafts, wells etc getting out in soft/disintegrated rocks complete all as specified and directed by Engineer-in-Charge. |
| 2 | Returning,filling in,including spreading,levelling,watering and well ramming in layers not exc 25cm in Soft/disintegrated rock. |
| 3 | Removing excavated material rock exc 1.50 km but n exc 5km and depositing where directed. |
| 4 | M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled & rammed including watering complete all as specified. |
| 5 | M&L for Hardcore of Broken stone/boulders gauge n exc. 63mm, deposited, spread & levelled in layers n exc. 15 cm thick, watered & rammed to a true surface complte all as specified and as directed., |
| 6 | M&L for 75mm thick PCC type D-2, (1:4:8) using 40mm graded stone aggregate in floors, sub floors complte all as specified and as directed., |
| 7 | M&L for Pre-Cast cement concrete block masonry, Type C1 ( 1:3:6 ), ( 20mm graded aggregate ) with solid blocks, Exc. 10 cm in Width and setting in CM ( 1:6 ), complete all as specified & directed by Engr-in-charge. |
| 8 | M&L for rendering 10mm thick on stone masonry surfaces or surface other than fair face of brickwork in CM (1:6) to be finished even and smooth (without using extra cement) complete all as specified and directed. |
| 9 | M&L for rendering 15mm thick on stone masonry surfaces or surface other than fair face of brickwork in CM (1:4) to be finished even and smooth (without using extra cement) complete all as specified and directed. |
| 10 | M&L for preparation of new plastered surface and applying two coat of acrylic external emulsion paint over a coat of primer complete as specified and directed. |
| 11 | M&L for applying two coats of oil bound distember/water based distemper over a coat of primer including applying Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and as directed by Engineer in Charge |
| 12 | Material and labour for preparation of old surfaces of ceiling including cornicess plaster etc for lime wash (white washing) and applying one coat of white wash on ceiling complete all as specified and as directed. |
| 13 | M&L for PCC type D2, 1:4:8 (40 mm graded aggregate) as in foundations, filling and mass concrete plinth beam. complete all as directed by Engr-in-Charge. |
| 14 | M & L RCC- M-30 (Design Mix) using 20mm graded aggregate for Column, Plinth Beam, chajjas,footing and Slab complete all as specified and directed. |
| 15 | S & F CRS TMT bars 10mm dia & over of Grade Fe 500D incl cutting, bending, binding & placing in position with binding wire.complete all as specified and directed. |
| 16 | S & F CRS TMT stirrups bars 8mm dia of Grade Fe 500D incl cutting, bending, binding & placing in position with binding wire.complete all as specified and directed. |
| 17 | S & F Gl frame work (Size of Grid 605 x 605mm) for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. complete all as specified and directed |
| 18 | S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long for false ceiling snap grid of size 605 x 605 mm complete all as specified and directed by Engr in Charge. |
| 19 | S&F Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh including any sunk or raised mouldings (fillets, metal frame work and G.I. wire mesh paid separately) complete all as specified and directed |
| 20 | M&L for vitrified ceramic tiles 9-10 mm thick, Light shade coloured (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including screed bed or bedding layer 15mm thick in cement mortar 1:6 complete all as specified and as directed. |
| 21 | S&F Plain solid, straight chowkats and frames of second class soft wood (Kail) Wrought Framed rabatted on the solid rounded or chamfered, put together with glue pinned at joints Complete all as specified and directed. |
| 22 | S&F 35 mm thick 2nd class Softwood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated Complete all as specified and directed. |
| 23 | S & F 35 mm thick 2nd class soft wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or roun- ded, mitred and rebated sash bars, any numbers edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats. |
| 24 | S&F in aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified. |
| 25 | M&L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described over 10 cm width or grith and painting with 2 coats of synthetic enamel paint over a coat of pink primer, Complete all as specified and directed. |
| 26 | S & F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed Complete all as specified and directed. |
| 27 | S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified |
| 28 | S&F 5.5mm thick Sheet glass ordinary quality and glazing with oil putty in squares exc 0.5 Sqm in each pane. |
| 29 | S&F 12 mm thick toughened glass for door, partition etc. of any size and side portions of toughened glass fixed to wall / floor, joints sealed with clear silicon silicate gel to make water tight, edges with diamond cut including taper drilling to flush the screws / all fitting as required, floor hinges, patch fitting top, bottom and sides, lock and handles, spider joint etc. and floor door spring as per requirement all as specified, required at site by manufacturer instructions and complete all as specified and directed. |
| 30 | S & F aluminium anodised, barrel tower bolts 200mm long of ex- truded section and fixed , Complete all as specified and directed. |
| 31 | S & F aluminium handles, cast type, anodised 150mm long , Complete all as specified and directed. |
| 32 | S & F 100mm butt hinges medium weight cold rolled mild steel fixed with screws or welded Complete all as specified and directed. |
| 33 | S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor over all length of cover 150 mm |
| 34 | Supply and fixing for factory made uPVC white colour sound minimising Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (±0.2mm). Window profile with hollow section with multi chamber, frame (110mm x 58mm), sliding sash (85mm x 42mm), sliding interlock (one vertical length in each shutter)(45 mm x 45mm), glazing bead (16mm x 24 mm) will be mitered cut and fusion welded at all corners, including railing of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware, EPDM gasket. 1.2 ±0.2mm thick galvanized steel frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm) 2nos, sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100m long fastener. Hardware (touch lock of zinc alloyed (white powder coated), steel roller system, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories, Arrangement of glass :-Two layers of 5mm thick toughen glass,gap between two glasses is 8 to 10 mm and gap is filled by Argon gas by using proper sealing compond ,total thickness of sandwich is 20 mm, All other necessary arrangement/items for making window sound proof included in this item . complete all as specified and directed by Engineer-in-charge. (Note: The area not exceeding 4.00 Sqm each fixed from ground floor to height of 2nd floors. ) |
| 35 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin- charge. |
| 36 | S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified & directed by Engr-in-charge. |
| 37 | S&F anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified & directed by Engr-in-charge. |
| 38 | M&L 20mm thick Granite work in steps, jambs, pillars, window-cills, cooking platforms laid over CM 1:4 , 15mm tk cement screed and jointed with grey cement slurry, and pointed with white cement with admixture ofpigment to match the shade ofgranite stone including grinding and polishing complete all as specified |
| 39 | S&F in door closer hydraulically regulated, aluminium extruded section designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified & directed by Engr-in-charge. |
| 40 | M& L for point wiring with PVC insulated unsheathed stranded copper conductor cable FRLSH of size 1.5 Sqmm, with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm stranded for earth continuity wire, to be drawn in and including in concealed conduit non metallic , rigid PVC conduit of adequated size with all fittings and conduit accessories including suiitable size modular metal flush box and modular white cover plate with frame for housing the switches,socket outlets ,including all necessary wall cutting and making good disturbed surface all as directed and specified .Note : Cutting chases and making good to match with the adjoining surface shall be included in the unit rate. |
| 41 | (a) One light point controlled by one switch |
| 42 | (b) One ceiling fan control by one switch |
| 43 | All as per item No.40 above but wire 2.5 sq mm cable for One 3 pin socket 5 Amps socket on the same board |
| 44 | All as per item No.40 above but wire 2.5 sq mm cable for One 3 pin socket 5 Amps socket as independent board |
| 45 | All as per item No.40 above but wire 4.0 sq mm cable for switch socket outlet 3 pin 15 Amps with 4.0 sq mm as earth continuity conductor. |
| 46 | S & F Modular switch 1 way 6A, 1 module all as specified and directed by EIC. |
| 47 | S & F modular socket, Socket, 6A - 2/3 pin combined 2 module all as specified and directed by EIC. |
| 48 | S & F Socket 16A - 2/3 pin combined 2 module, all as specified and directed by EIC. |
| 49 | S & F Modular switch 1 way 16A, 1 module all as specified and directed by EIC. |
| 50 | Supply and fixing Modular fan regulator 120Watt, 2- module , AC 240 Volts complete. |
| 51 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and ccessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed. |
| 52 | S & F LED luminaire upto 600 mm x 600 mm 35/36 watt , 220 V AC recessed/surface type with high effficiency PMMA diffuser soft galre free light complete with driver, holderd & LED lamp suitable for roof ceiling including connecting up with 3 core flexible cppper conductor cable with suItable size complete all as directed by Engr-In-Charge. |
| 53 | S & F MCB DB made of sheet steel , powder painted with NUTRAL bus bar 200 A, neutral link, earth bar and Din rail , 240Volts SPN with 12 way Double door IP-43-IK09 protection grade, |
| 54 | S & F MCB SPN 240 Volts, 'C' series, breaking capacity 10 KA of rating 40 to 63Amps |
| 55 | S & F MCB SP 240 Volts 'C' series, breaking capacity 10 KA of rating 6-32 Amps complete all as specified & directed by Engr-In-Charge. |
| 56 | S & F Sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable FRLSH 2 Single core of size 6 Sqmm, earth continuity conductor of size 1X 6 Sqmm to be drawn through and including PVC casing caping/PVC Conduit not less then 25mm dia medium Grade all as directed by Engineer in Charge.Notes:- (i) Two wires of 6 sqmm and one wire of 6 sqmm and one run of PVC conduit /casing caping shall be measured as one unit. |
| 57 | M&L Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion all as specified and as dierected. |
| 58 | M&L for Sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable FRLSH 2 Single core of size 4 Sqmm, earth continuity conductor of size 4 Sqmm to be drawn through and including PVC Conduit of suitable dia medium Grade concealed on walls/roof/floors all as directed by Engineer in Charge.Notes:- (i)Two wires of 4 sqmm and one wire of 4.0 sqmm and one run of PVC Conduit shall be measured as one unit. |
| 59 | S & F earth enclosure with 2 pin earth plug socket complete with MCB SP 20/ 25 amp,flush mounting type |
| 60 | Supply and install UPS for 30 min back up three phase AC input 300 to 450V and out put three phase AC out put Voltage 415 V ± 1% of capacity 20 KVA including battery bank consisting of 24 Nos 12V/120 AH along with its stand complete all as specified and as directed.make : Microtek/Luminious/Aplab or equivalent as approved by GE |
| 61 | S & F Sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable FRLSH 2.5 Single core of size 2.5 Sqmm, earth continuity conductor of size 2.5 Sqmm to be drawn through and including PVC Conduit not less then 25mm dia medium Grade fixed on walls/roof/floors all as directed by Engineer in Charge.Notes:- (i)Two wires of 2.5 sqmm and one wire of 2.5 sqmm and one run of PVC Conduit shall be measured as one unit. |
| 62 | S & F MCB TPN 63 Amps , 415Volts, 16 KA complete all as specified and directed. |
| 63 | S& F XLPE insulated armoured and pvc sheated heavy duty electric cable ,3-1/2 core 25 Sqmm cross sectional area aluminium conductor 1100 volt grade as per IS 7098 (Part-1) 1988 with latest amendment laid in trenches passing through pipes /ducts including testing complete all as specified and as directed. |
| 64 | Supply and fix ON LOAD change over switch 415V in sheet metal enclosures 4 pole of capacity 63 Amps. Please Enable Macros to View BoQ information |
