Tender For Special Repair To Bldg No 01 At Arjun Marg Under Age B/R (Central) Of Ge (North) Pune
Tender Value
44.39 Lakhs
Estimated cost
Bid Submission
13 Jul 2026
5 days left
EMD
88780
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No 01 At Arjun Marg Under Age B/R (Central) Of Ge (North) Pune
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed. |
| 2 | Dismantling framed timber scantlings 40 sqcm and over in section, in any position complete all as specified and directed. |
| 3 | Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 4 | Dismantling of Roof tiles incl ridge, Mangalore pattern,interlocking at side joints, laid dry complete all as specified and as directed |
| 5 | Dismantling second class hardwood battens squar/rectangular in section spacing exc. 15 cm complete all as specified and directed. |
| 6 | Taking down wooden roof trusses, coupled rafters exc 8 mtr but n exc 12 mtr span complete all as specified and directed |
| 7 | M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including of demolition of existing PCC complete all as specified and directed. |
| 8 | M&L Brick work with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 etc including demolition of brickwork built in cement mortar complete all as specified and directed. |
| 9 | Taking down cement plaster on brick/ stone walling including raking out joints, hacking for key, scrubbing down with water etc complete all as directed. |
| 10 | M & L for rendering 10mm thick in CM (1:6) on brick masonry internal surfaces of walls finished even and smooth without using extra cement complete all as specified and directed. |
| 11 | M&L for 15mm thick cement plaster in CM 1:4 on bricks or concrete surfaces finishing the surfaces even and smooth without using extra cement upto 8.0m height of Bldg with using @ 2% WPC of cement complete all as specified and directed. |
| 12 | M&L for preparation of new plastered surfaces and applying two coats of weather proof exterior emulsion paint ('APEX' brand of Asian or equivalent brand of Berger/Shalimar) over a coat of primer on wall complete all as specified and as directed by Engineer-in-charge. NOTE: This item of work is to be operated upto 8m Building Height. |
| 13 | M&L for preparation of new plastered wall surfaces and applying two coats of plastic emulsion over a coat of alkali resistance primer over a thin (1-1.5 mm) layer of wall care putty complete all as specified and directed. |
| 14 | M&L for preparation of new plastered wall surfaces and applying two coats of Lustre over a coat of alkali resistance primer over a thin (1-1.5 mm) layer of wall care putty complete all as specified and directed. |
| 15 | Supply and fix mild steel Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and as directed. |
| 16 | S&F Mild steel screw bolts (machine made) 16 mm to 25 mm dia with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exc 22.5 cm and n.exc 30 cm long fixed to any framed structure or any other required places complete all as specified and directed. |
| 17 | M&L for preparation of new steel surface exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 18 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof coverings complete all as specified and directed. |
| 19 | S&F for 0.50mm thick pre-painted galvalume profiled manglore pattern roof sheets in roof at height n. exc. 10 mtr including necessary scaffolding etc complete all as directed and specified. |
| 20 | -Ditto- all as per item No 19 here in before but 0.50mm thick plain sheets for ridges/valley/gutters complete all as specified and directed. |
| 21 | M&L for 10 mm thick Gymsum board (mositure resistant) seamless as in the ceiling/ linning fixed with counter sunk screws on and incl GI channels frame work of stardard section as per manufacture,s instructions, fixec @ 1.2 m in one direction and 45 cm in center to center in other direction with necessary fixing arrangmentat their junction point at desired heights below roof slab and incl two coats of lustre paint over a coat of primer on exposed surfaces. (The frame work shall be fixed with the help of GI suspenders of suitable size with the help of sash fasteners and along wall, making good disturbed surfaces, smoothening the gypsum board, POP lining at joints as required incl dismantling of existing complete all as specified and directed. Make : Gyproc-saint Gobain/Armstong/Diaken. |
| 22 | M&L for POP cornices for seamles false ceiling incl necessary hanging arrangments and painting to match the false ceiling atc complete all as specified and directed. |
| 23 | Complete removal of existing treatment of old plastered surface of wall applying two coat of plastic emulsion paint over a coat of primer over a thin layer (1.5 mm thick) of wall care putty inluding smoothen the surface by sand paper complete all as specified and as directed. |
| 24 | Complete removal of existing treatment of old plastered surface of wall applying two coat of lustre paint over a coat of primer over a thin layer (1.5 mm thick) of wall care putty inluding smoothen the surface by sand paper complete all as specified and as directed. |
| 25 | Material and labour for scrapping out old treated wooden surfaces in door/windows sanding the surfaces using sanding machine, application of pigment and hardener to desired colour and finally applying two or more coats of melamine polish with spray guns, compressor etc complete till glossy surface is obtained complete all as specified and as directed. |
| 26 | S&F in repair 10 to 12 mm thick decorative/designed AC board as in eaves board and similar work at height exc. 5 m and not exc. 7 m including two coats of synthetic enamel paint a coat of primer complete all as specified and directed. |
| 27 | Taking down chowkats or frames not exc. 1.5 sq. m each with shutters of any description (without taking off shutters from the frames) complete all as specified and directed |
| 28 | All as per item No 27 above but exc. 1.5 sq.m but n exc 4 sqm each complete all as specified and directed |
| 29 | Taking down old door shutter exc 1.0 sq. m but n exc 2.0 sqm each complete all as specified and directed |
| 30 | S&F aluminium anodised powder coated ventilator using rectangular tube of size 63.50 x 25 x 1.50 mm including 3.50 mm thick designer glass louvers and stainless steel wire mesh 0.36 mm nominal dia of wire, average width of aperture 1.40 mm using ‘Jindal” aluminium section complete all as specified and directed. |
| 31 | S&F for aluminium powder coated three track sliding window with two glazed shutters with 4mm thick float glass ordinary quantity and one shutter of stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing handle, locks, PVC rubber lining etc complete all as specified and as directed. Catlouge numbers of Jindal company or equivalent make complete all as specified and directed. Sections of Jindal company : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604. |
| 32 | S&F 1st class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 33 | S&F second class hard wood 35mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated including two coat of synthetic enamal paint over one coat of pink primer complete all as specified and directed. |
| 34 | Material and labour for new wooden surfaces in door / windows sanding the surfaces using sanding machine, application of pigment and hardener to desired colour and finally applying two or more coats of melamine polish with spray guns, compressor etc complete till glossy surface is obtained complete all as specified and as directed. |
| 35 | S&F for HDHMR (high density high moisture resistance) board manufactured with hard wood, prelaminated both sides in any colour 18 mm thick water resistant, termite resistant, duly edge banded with PVC taping 0.8 mm thick, cut to shape & size as in cupboards/shelves/cabinets and similar work etc including taking down with existing one complete all as specified and directed. Make: Action tesa, Century, Kitply |
| 36 | Supply and fix in repair for stainless steel wire cloth 0.63 mm nominal dia of wire, average width of aperture 1.40 mm, fixed with tinned tacks or galvanised wire staples complete all as specified and as directed . |
| 37 | S&F 300mm long brass sliding door bolts with sand or die cast brass hasp, staple (bolt type) and fixing bolt with roller or drawn brass bolts, ISI marked, complete all as specified and as directed. |
| 38 | S&F in repairs 300mm long brass sliding door bolts with sand or die cast brass hasp, staple (bolt type) and fixing bolt with roller or drawn brass bolts, ISI marked, complete all as specified and as directed. |
| 39 | S&F 200 mm long brass tower Bolt ( selected quality as approved ) fixed with Self Tapping screws complete all as specified and directed by Engr-in-Charge. |
| 40 | S&F in repairs 200 mm long brass tower Bolt ( selected quality as approved ) fixed with Self Tapping screws complete all as specified and directed by Engr-in-Charge |
| 41 | S&F brass butt hinges medium weight 100mm complete all as specified and directed.NOTE :- All screws shall be self tapping brass plated and length of screw not less 38 mm |
| 42 | S&F in repair brass butt hinges medium weight 100mm complete all as specified and directed.NOTE :- All screws shall be self tapping brass plated and length of screw not less 38 mm |
| 43 | Supply and fix brass floor door stopper, overall length of cover plate 150mm complete all as specified and directed. |
| 44 | Supply and fix in repairs brass floor door stopper, overall length of cover plate 150mm complete all as specified and directed. |
| 45 | S&F brass handles of 200 mm (selected quality as approved) long fixed with self tapping screws complete all as specifed and directed by Engr-in-Charge |
| 46 | S&F in repair brass handles of 200 mm (selected quality as approved) long fixed with self tapping screws complete all as specified and directed by Engr-in-Charge |
| 47 | S&F in repairs brass Mortice lock, vertical type, size 100 mm 4 Levers complete all as specified and as directed. |
| 48 | S&F in repairs chromium plated two way bib cock with wall flange 15mm dia Cat No. QQT 7041 of make Jaquar ‘QUEEN'S series or equivalent of make as per Appx 'A' as approved by GE all as specified and as directed. |
| 49 | S&F in repairs chromium plated fittings angular stop cock with wall flange 15mm dia Cat No. QQT 7053 of make Jaquar ‘QUEEN'S Series or equivalent of make as per Appx 'A' as approved by GE all as specified and as directed. |
| 50 | S&F in repairs chromium plated pillar cock 15mm dia Cat No. QQT 7011 of make Jaquar ‘‘QUEEN'S Series or equivalent of make as per Appx 'A' as approved by GE all as specified and as directed. |
| 51 | S&F in repairs chromium plated single towel rail 600mm long including built in side brackets ,Cat No. AQN-7711 of make Jaquar ‘QUEEN'S Series or equivalent of make as per Appx 'A' as approved by GE all as specified and as directed. |
| 52 | S&F in repairs chromium plated toilet paper holder ,Cat No. AQN-7751 of make Jaquar ‘‘QUEEN'S Series or equivalent of make as per Appx 'A' as approved by GE all as specified and as directed. |
| 53 | S&F in repairs chromium plated towel ring round, Cat No. AQN-7721 of make Jaquar ‘QUEEN'S Series or equivalent of make as per Appx 'A' as approved by GE all as specified and as directed. |
| 54 | S&F in repairs chromium plated wall mixer 3-in-1 system with provision for both hand shower and overhead shower complete with wall flange with 115mm long bend pipe, connecting legs ,Cat No. QQT-7281 of make Jaquar ‘QUEEN'S Series or equivalent of make as per Appx 'A' as approved by GE all as specified and as directed. |
| 55 | S&F in repairs hand shower (health faceut) ABS body with 1m long flex tube in chrome finish and wall hook cat part no ALD CHR 585 of make Jaquar ‘ or equivalent of make as per Appx 'A' as approved by GE all as specified and as directed. |
| 56 | S&F in repairs soap dish holder cat part no AKP 35173P of make Jaquar ‘ or equivalent of make as per Appx 'A' as approved by GE all as specified and as directed. |
| 57 | S&F in repairs overhead shower 200X200mm (body and plate stainless steel) with shower arm OHS CHR 1605 of make Jaquar ‘ or equivalent of make as per Appx 'A' as approved by GE all as specified and as directed. |
| 58 | S&F in repair 5 mm thick float glass bevelled edge looking mirror including with 04 Nos studs for fitting complete all as specified and as directed. |
| 59 | Supply and fix in repairs, chromium plated long body bib cock with wall flange 15mm dia Cat No.FUS 29037 of make Jaguar or equivalent of make as per Appx 'A' as approved by GE complete all as specified and as directed. |
| 60 | Supply and fix in repairs for brass brackets for drapery/ curtain rod, decorative type, as per sample kept in GE (N) Pune office complete all as specified and as directed. |
| 61 | Supply and fix in repairs for brass drapery/ curtain rod of 25mm dia, decorative type, complete all as specified and as directed. |
| 62 | Supply and fix in repairs vitreous china wash down floor mounted coupled water closet with PP soft close seat cover, hinges, fixing accessories and accessories set, size 410x720x800mm, S trap 250mm, flushing cistern with cistern fittings complete all as specified and as directed. Make :- Jaquar Cat No. VGS-WHT-81751 S (Bowl) and VGS-WHT-81201 (Cistern) or of equivalent make as per Appx 'A' as approved by GE |
| 63 | Supply and fix in repairs vitreous china wash down rimless wall hung water closet with PP soft close seat cover, hinges, fixing accessories and accessories set, P trap 250mm, complete all as specified and as directed. Make :- Jaquar Cat No. FLS-WHT-5953PPSM or equivalent make as per Appx 'A' as approved by GE |
| 64 | S&F rotational moulded polyethylene water storage tank 3 layer black/white colour water tank, non- toxic effect, algea formation protection (made frome virgin grade of polyethy-lene material which is duly stablized with anti-oxident plastic) of capacity 2000 litres, cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc complete including dismantling existing water tank all as specified and directed. |
| 65 | M&L for PCC (1:2:4) type B-1 (using 20mm graded stone aggregates) as in roof padding mixing of WPC @ 2% by weight of cement, of any thickness finished fair and even incl demolition of existing complete all as specified and as directed. |
| 66 | Material and labour for water proofing treatment to RCC roof slab complete all as specified below and as directed:- (a) Complete Removal of existing waterproofing treatment / membrane including screed bed/ plaster and removing the material where directed to a distance not less than 500m and cleaning the roof surface with water (b) Providing 15 mm thick plaster on roof surface in CM (1:4) with using WPC as per manufacturers instructions. (c) Cleaning the plastered surface and applying Oil Based Bituminous primer @ 0.25 ltrs/ Sqm. (d) Applying hot blown bitumen of grade 85/25 @ 1.20 Kgs/ Sqm. (e) Laying APP Modified bituminous membrane 3mm thick weighing not less than 3.50 Kgs/ Sqm with non woven polyester mat as reinforcement with plain finish laid over hot bitumen on roof surface. (f) Applying two coats of aluminium paint on APP membrane surface. (g) Overlaps (end and longitudinal) shall be finished by torch application. Note No (i) : Overlaps shall be provided as under End Over Laps - 150mm Longitudinal overlaps 100mm. (ii) : Waterproofing Compound shall be measured and paid separtely under relevant item. |
| 67 | Supply only Liquid water proofing compound complete all as specified and as directed. |
| 68 | M&L for preparation of old decorated surfaces and applying two coat of weather proof exterior emulsion paint ('APEX' brand of Asian or equivalent brand of Berger/Shalimar) on wall complete all as specified and as directed by Engineer-in-charge. NOTE: This item of work is to be operated upto 5m Building Height. |
| 69 | S&F in repairs 110mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls complete all as specified and directed. |
| 70 | S&F in repairs PVC (SWR) bends of any radius of 110mm bore complete all as specified and directed. |
| 71 | S&F in repair for PVC (SWR) junction single (single ‘T’) equal or unequal with access door for 110mm bore pipe complete all as specified and directed. |
| 72 | S&F in repair stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100mm dia of bore complete all as specified and directed. |
| 73 | M&L for 2nd class softwood palin fillets, squar/rectangular in section, clean sawn, secured with nails or brads sec exc 13 sqcm but n exc 25 sqcm including dismantling of existing complete all as specified and directed. |
| 74 | M&L for 12mm thick plywood, grade BWR,type BB, number of ply 09 nos, fixed with fevicol and nails for working table/storage almirah to the size and pattern fixed with wooden frame work, including taking down existing plywood complete all as specified and directed. |
| 75 | S&F for 4mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face fixed with screws to timber frame work complete all as specified and directed. |
| 76 | M&L for preparation of new wood or wood base surfaces and applying malamine polishing on surfaces of any description,width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and directed. |
| 77 | M&L for non metalic rain water gutter system along all acessories/ fitting and down pipe/ spout (model no K35) complete all as specified and directed.Make :- Monier LUXRON or equivalent. |
| 78 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and makinggood disturbed surfaces of walls, floors, etc complete all as specified and directed. |
| 79 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators sockets etc. to be measured separately), removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors, etc complete all as specified and directed. |
| 80 | Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors, etc complete all as specified and directed. |
| 81 | M&L for Point wiring using FRLS-H PVC insulated unsheathed, multistranded copper conductor cable 1.5 sqmm drawn through and including PVC conduit of min 20 mm dia by Cutting chases for conduits and sinking's for boxes and making good to walls, floors etc fot concealed conduit wiring (In Stone Masonary) with modular flush box metal of GI sheet minimum 1.2 mm thick (ISI Marked) with earth terminal for safety, flush metal GI box of required modules as per site requirement and modular plate with support frame white in colour (ISI Marked) of required modules, 3mm thick including all fittings i.e. tees, bands and junction boxes, screws etc. complete for One light/Fan point/bell point controlled by one switch 6 Amps one way using cable (1.5 Sq mm for phase and neutral and 1.5 sq mm earthing) Note:- (a) wiring shall be done by using colour coding (b) Earth wire shall be of green colour. (Make:-Finolex/Anchor/Grandlay/Polycab/L &T/Havells) |
| 82 | All as item No 81 above One 3 pin socket outlet, 5 Amp socket outlet on same board with other switches. |
| 83 | All as per item No 81 above but One 3 pin socket outlet, 5 Amp socket outlet on independent board. |
| 84 | One bell point controlled by one, one way switch 6 Amps complete all as specified and as directed |
| 85 | One 3 pin 15 Amps socket outlet independent but below the switch board of light points in the same vertical plane, using FRLS-H PVC insulated unsheathed, multistranded copper conductor cable 2.5 sqmm drawn through and including PVC conduit of min 20 mm dia by Cutting chases for conduits and sinking's for boxes and making good to walls, floors etc for concealed conduit wiring (In Stone Masonary) with modular flush box metal of GI sheet minimum 1.2 mm thick (ISI Marked) with earth terminal for safety, flush metal GI box of required modules as per site requirement and modular plate with support frame white in colour (ISI Marked) of required modules, 3mm thick including all fittings i.e. tees, bands and junction boxes, screws etc. complete for power point controlled with cables, 2.5 sq. mm size (2.5 Sqmm for Phase and neutral and 2.5 Sqmm for earthing) (Make:-Finolex/Anchor/Grandlay/Polycab/L &T/Havells) |
| 86 | Supply and fixing in repairs modular Switch fabio classic white series/ Switch fabio classic white with indicator, ISI marked 16 AX Amps One Way switch complete all as specified and directed.(Make:- Cat Part No AHFSXXW161 of Havells or equivalent in Indoasian/Legrand/Anchor/Crabtree) |
| 87 | Supply and fixing in repairs modular socket outlet fabio series 6 Amps 3 pin unversal socket with child safety shutter, Shrouded terminals compatible with all standard mobile chargers, ISI marked for the same board complete all as specified and directed. (Make:- Cat Part No AHFKPXW063 of Havells or equivalent in Indoasian/Legrand/Anchor/Crabtree) |
| 88 | Supply and fixing modular charging socket suitable for USB charger 2.1A to charge mobile, polycarbonate material, shrouded terminal, ISI marked 6 Amps One Way complete all as specified and directed.(Make:- Cat Part No AHOKGXG002 of Indoasian or equivalent Havells/Indoasian/Legrand/Anchor) |
| 89 | Supply and fixing in repairs modular socket (Fabio classic white) outlet 16 Amps shuttered socket (heavy duty) 3 pin unversal socket with child safety shutter, Shrouded terminals compatible 2 ton AC and 3.5KW geyser, ISI marked for the same board complete all as specified and directed. (Make:- Cat Part No AHFKCXW253 of Havells or equivalent Havells/Indoasian/Legrand/Anchor/crabtree) |
| 90 | Supply and fixing in repairs modular Switch fabio classic white series/ Switch fabio classic white with indicator, ISI marked 6 AX Amps One Way switch complete all as specified and directed.(Make:- Cat Part No AHFSXXW061 of Havells or equivalent in Indoasian/Legrand/Anchor/Crabtree) |
| 91 | Supply and fixing Sheet Metal enclosure double door for DBs when MCBs to be used SPN-12 Way with 200 Amp rated bus bar complete all as specified and directed. (Make:- Cat Part No 811818 of Indoasian or equivalent Havells/Indoasian/Legrand/Anchor) |
| 92 | Supply and fixing amp rating 240V, 10KA curve 'C' mini miniature circuit breaker (MCB) SPN and current carrying capacity 40 Amps in the MCB DB complete with connection testing and commissioning (Make: Havells Havells/Legrand/Anchor) |
| 93 | Supply and fixing amp rating 240V, 10KA curve miniature circuit breaker (MCB) SP and current carrying capacity 5-32 Amps in the MCB DB complete with connection testing and commissioning (Make:- Cat Part No 811818 of Indoasian or equivalent Havells/Indoasian/Legrand/Anchor) |
| 94 | Supply and fixing in repairs modular Ceiling Ceiling rose, 3 phase/PVC/polycarbonate, isolated body 50 x 65 mm surface type complete all as specified and directed. (Make:- Cat Part No AHLHXCW000 of Havells or equivalent Havells/Indoasian/Legrand/Anchor/crabtree) |
| 95 | Supply and fixing in repairs modular 5 stepped type electronic fan regulator- 2M 100W laser marking as reqd at site complete all as per specified and directed. (Make:- Cat Part No AHFRFXW004 of Havells or equivalent Havells/Indoasian/Legrand/Anchor/crabtree) |
| 96 | Supply and fixing Aluminium, mild steel silver (satin nickel) finish double spot light great for installation above a dressing mirror, dressing table, to provide illumination while in front of mirror an E14 holder including lamp of 15 W, has a higher light output or a different color temperature with adjustable to required position matching three light code – ML182-3 (Warm White) suitable including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. (Make:-Bajaj/Havells/Indoasian/Legrand/Anchor/Philips) |
| 97 | Supply and fixing FLORETINE WL 1LS B22 SS 09W Decorative, wall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LED lamp B22 base (Warm White) watt 220 volts suitable for fixing on wall including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. (Make:-Cat Part No LHFOAJE1TZ1I060 of Havells or equivalent Havells/Indoasian/Legrand/Anchor/crabtree) |
| 98 | Supply & Fixing only LED lights fitting 20W LED 6000K (4Ft), 220V,AC decorative box type with driver, Aluminium extruded (Intervertor tubelight fittings)holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. (Make- Havells/Indoasian/Legrand/Anchor/Philips) |
| 99 | Supply and fixing in repairs LED light fitting 2 feet, 10 watt 220 V AC decorative type with driver holder, Aluminium Extruded(Intervertor tubelight fittings) and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete (Make- Bajaj/Philips/Havells/Indoasian/Legrand/Anchor/PhilipsGE lighting) |
| 100 | M&L for sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 4 Sqmm, earth continuity conductor of size 4.0 Sqmm to be drawn through and including PVC conduit 20mm dia medium Grade concealed in walls/roof/floors including taking down the old submain wiring all as directed by Engineer in Charge.Notes:- (i) Two wires of 4 sqmm and one wire of 4.0 sqmm and one run of PVC conduit shall be measured as one unit. (Make- Havells/Polycab/KEI/Finolex) |
| 101 | M&L for Sub Main wiring complete with copper conductor, multi stranded, FRLS, PVC insulated and sheathed, 6 Sq mm, two run 1100 volts grade, incl drawn through PVC suitable size counduit and 6 Sqmm single run for earthing.(Make- Havells/Polycab/KEI/Finolex) |
| 102 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250mm, BLDC motor (Make: Atomberg/Bajaj/Havells) |
| 103 | Supply and fixing GOBLETO WL 1LS E27 GLD Wall mounted, Wall light with Antique brass in colour, 1 x 7.5 W A60 LED filament lamp(Warm White) with 235mmx145mmx165 mm in dimensions, 220 volts IP 20 protection suitable for fixing on wall including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. (Make:-Cat Part No Cat Part No LHFOAKD1TZ1D060 of Havells or equivalent /Indoasian/Legrand/Anchor/crabtree) |
| 104 | Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete (Make Havells/Philips/CG/Halonix) |
| 105 | Supply and fixing Bell push, flush type 5 Amps complete all as specified and directed. (Make- Havells or equivalent Indoasian/Legrand/Anchor/crabtree) |
| 106 | Supply and fixing Bell AC 230 Volts, single pole, 50 Hz complete all as specified and directed. (Make:-Havells or equivalent Indoasian/Legrand/Anchor/crabtree) |
| 107 | Supply and fixing Sheet Metal enclosure double door for DBs when MCBs to be used VerticalTPN-4 Way with 200 Amp rated bus bar complete all as specified and directed (Make:-Havells or equivalent Indoasian/Legrand/Anchor/crabtree). |
| 108 | Supply and fixing of geyser Bolt 120mm Long with nut & washers, complete all as specified and directed |
| 109 | Taking down hot water geyser of any capacity after disconnecting, dismantling and removal to trade workshop for repair for servicing of Geyser by disconnecting the electric and water supply connections, dismantling the geysers of any size, type & capacity and opening the top and bottom cover, thermostat, heating element, safety valve, vent pipe, separating inner & outer tank, removing glass wool insulation complete and keeping aside for re-use after de-scaling of inner tank by liquid chemical and with pressure water jet and assembling back the geyser including re-installation on wall with studs, nuts & boltskeeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors, etc complete all as specified and directed by Engr-in-Charge. |
| 110 | Supply and fixing, Ding Dong bell suitable for operation on AC. 230 volts, single pole complete all as specified and as directed. |
| 111 | S & F in Repair for LED down light recess mounted luminare, round type 15 watts with efficiency of 100 lumens per watt, sleek design aluminium housing polycarbonate diffuser white finish operating voltage 150 V-270 V AC, 50 Hz all as per Make- Philips Cat Part No DN172B LED9S-6500 PSU, jaquar nero plus LNRP01R012XN or Havells complete all as directed by Engineer- in-charge |
| 112 | M & L for Earthing complete with galvanised steel earth plate, electrode,600x600x6.0 mm thick burried directly in ground (earth pit not less than 2.25m deep below normal ground level) connected to GI strip 32x 6 mm thick dia by mens of nuts, bolts, & washers of GI as shown in electrical plate No. 5 of SSR Part-I Connected to earthing ten point all as specified and including necessary earth pit PCC 1:3:6 chanber be 50mm thick PCC 1:2:4 chamber cover with 6mm dia mild steel reinforcement of 10 cm c/c spacing both ways in lieu of CI cover , watering arrangement shall be made with GI pipe light grade of 20mm dia including funnel and protection to earth lead shall be provided with GI pipe light grade 15mm dia unto 7.5 from the earth plate electrode & refilling of soil etc including necessary excavation & earth work in any strata and PCC chamber all as specified and directed by Engr-in-Charge including demolish existing earth pit taking out old materials. |
| 113 | Supply and fixing Modular Bell push - 6 Amps, Single pole one way, one module complete all as specified and as directed. |
| 114 | S & F Vertical TPN Distribution Board in sheet metal enclosure double door 4 Way, 415 volts, 50 Hz, suitable for Flush Mounting and surface Mounting & provision for FP MCCB as incomer up to 125 Amps as I/C ( Frame1) and SP/TP MCB's as outgoing (Modules Optium F1+12) , With -100 Amps Copper insulated Busbar assembly for each phase, isolated Neutral bar, 2 Earthbar and Cable ties for cable management, IP 43 - #IK 09 with metal door including necessary cement work and electrical connections complete all as specified and as directed. |
| 115 | Supplied and fixed Four pole MCCB, Thermal Release Range 63-100 Amps, rupturing Breaking Capacity Icu at 415V AC 50Hz. 30 (kA) complete all as specified and as directed |
| 116 | Supply,installation,testing and commissioning of ceiling mount auto light occupancy, dual technology sensor,adjustable of delay timer, infra red and ultrasonic detection,Dia 8meters IP 20, 3 wire with neutral optimum distance between 2 sensors should be 6 Mtr, stand by consumption 0.8W, fixed directly to a false ceiling with mounting claws (included) or installed in a battibox depth 50 mm all as specified and directed. Note:- All necessary FRLSH copper wires to connect complete lights of office bldg/OR living/Messes etc are deemed to be included in the rates quoted above for motion sensors. Make : Legrand Cat no 048806, SWG 12582DB12 of Siemens, MTN630919 Schneider. |
| 117 | S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting with peanut lenses luminaire with high power LEDs as light source and electronic driver of capacity 25 watts or above with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 0.6 to 0.9 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. Make :-Havells Cat part No ENDURASUNDOWNSL25WLED765PASYBOPCIHD Jaquar LPCRSRT25WLC or equivalent. |
| 118 | Excavation in trenches not exc 1.5 Mtr wide and not exc 1.5 Mtr deep in soft / loose soil and getting out and levelling of bottom surface to required level complete all as specified and directed. |
| 119 | Removing excavated material of soils from site to a distance not exc 50mtr away and depositing where directed not exc 1.5mtr from the starting point complete all as specified and directed. |
| 120 | Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm thick complete all as specified and directed. |
| 121 | M & L for Clear Sand for cushioning under ground cable 8 cm below and 15 cm above in trenches / cable duct filling complete in level all as specified.(Punned thickness only measured and paid) |
| 122 | M & L for Brick well burnt locally available sub class 'B' laid over sand cushioning to cable protection in trences keeping width of brick parallel to the length of cable complete all as specified and directed. |
| 123 | Taking down old unsv cable of size 25 & 35 Sqmm 3.5/4 core complete all as specified and directed. |
| 124 | Supply and laying under ground LT Cable XLPE insulated heavy duty armoured sheathed 1100 volts grade of cross sectional area 25 Sq mm, 3.5 core, with aluminium conductor, ISI marked as per IS : 7098 ( Part-1) along with suitable size aluminium cable lugs, gland if required and jointed in any description complete all as specified.Make- Polycab/ Havells/Gloster |
| 125 | S & F in repairs tube light grade galvanized of size 40mm with all fitings laid in trenches/ under road floor alongthe pipe for cable protection of size 40mm bore complete all as specified and directed. |
| 126 | Disconnecting electric supply from electric meters and dismntling MS electric meter box of any type / size including electric meters, switch gear,MCCB/MCBs etc complete and supply fabricate, testing and commissioning of MS Sheet Electric meter box 2 mm thick double door with locking arrangement of size /dimention not less than 130 x75x30 Cm with suitable thickness of hylem sheet for fixing existing electric meter -06 Nos,including provision of new MCCB 100A -01 No., MCB SPN 32 A-07 Nos with suitable size of aluminium busbar for phase & neutral and see through glass-08,connecting internally prewired copper conductor witth electric meter connection of required size ,applied with powder coated synthetic enammeled paint and making good to the disturbed wall surface complete all as specified and directed. |
| 127 | M & L for Earthing complete with galvanised steel earth plate, electrode,600x600x6.0 mm thick burried directly in ground (earth pit not less than 2.25m deep below normal ground level) connected to GI strip 32x 6 mm thick dia by mens of nuts, bolts, & washers of GI as shown in electrical plate No. 5 of SSR Part-I Connected to earthing ten point all as specified and including necessary earth pit PCC 1:3:6 chanber be 50mm thick PCC 1:2:4 chamber cover with 6mm dia mild steel reinforcement of 10 cm c/c spacing both ways in lieu of CI cover , watering arrangement shall be made with GI pipe light grade of 20mm dia including funnel and protection to earth lead shall be provided with GI pipe light grade 15mm dia unto 7.5 from the earth plate electrode & refilling of soil etc including necessary excavation & earth work in any strata and PCC chamber all as specified and directed by Engr-in-Charge including demolish existing earth pit taking out old materials. |
| 128 | Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysJul 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender