Tender For Addition Alteration Cum Special Repair To Certain Otm Accn At Mil Stn Bd Bari Under Ge Kaluchak
Tender Value
1.44 Crore
Estimated cost
Bid Submission
20 Jul 2026
8 days left
EMD
2.20 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition Alteration Cum Special Repair To Certain Otm Accn At Mil Stn Bd Bari Under Ge Kaluchak
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of AC corrugated sheets of any thickness as in roofs including ridge complete all as specified and as directed |
| 2 | Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified and as directed |
| 3 | Dismantling structural steel work including Frame truss etc complete all as specified and as directed |
| 4 | Refixing Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including complete all as specified and as directed |
| 5 | S&F , prepainted galvalume aluminium zinc coating G.I based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in roof covering /cladding to wall, fixed with self taping screws complete all as specified and as directed |
| 6 | S&F , prepainted galvalume aluminium zinc coating G.I based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in roof covering /cladding to wall, fixed with self taping screws as in ridge covering complete all as specified and as directed |
| 7 | S&F `Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etcconforming to complete all as specified and as directed |
| 8 | S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachementconforming to complete all as specified and as directed |
| 9 | S&F mild steel purpose made bolts of diameter of neck exc 12 mm but n.exc 20 mm with hexagonal or square head one end and screwed the other or screwed both ends, each screwed ends to be fitted with washers and one hexagonal or sqare n.exc 30 cm long complete all as specified and as directed |
| 10 | Dismantling wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/slabs/blankets any thickness complete all as specified and as directed |
| 11 | S&F Suspended false ceiling system using 4mm thick high pressure steam cured fibre cement pre-primed textured varient E-board (classic), ISI marked, conforming to IS:14982-2000 over and including GI snap grid frame work for false ceiling, grid size 605 x 605 mm with GI angle of size 24x24mm, main runner ‘T’ of size 24x38mm, secondary runner ‘T’ of size 24x28mm with 6mm GI wire with butterfly clips for leveling, fastners, supports, plugs to walls/joists etc all as per manufacturer’s Instructions, including making holes, cutting chasis and making good existing walls in cement mortar 1:3 or PCC 1:2:4 type B1, complete all as specified and as directed Note : All steel members shall be hot dipped galvanised with zinc coating not less than 120 gm/sqm. |
| 12 | Demolition of brick /stone masonry built in cement mortar of any description complete all as specified and as directed |
| 13 | M&L for brickwork with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed |
| 14 | Brick work with sub class ‘B’ bricks ,straight or curved on plan exc 6 m mean radius and built in cement mortar 1:6 complete , but except bricks , i.e using serviceable bricks obtained from demolition complete all as specified and as directed |
| 15 | Demolition of reinforced cement concrete of any description not otherwise specifically provided for (reiforcement cut to facilitate demolition) complete complete all as specified and as directed. |
| 16 | M&L for cement concrete type B1 (1:2:4) using 20 mm graded as in beams, cantilevers, bressummers, lintls over 1.5 m span complete all as specified and as directed |
| 17 | M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup ports, overhangs, etc also spays between floors and beams etc complete all as specified and as directed |
| 18 | M&L for TMT bars 10mm dia and over cut to length, bent to shape required including cranking and bending spirally for hopping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.90mm dia) or securing with clips complete all as specified and as directed |
| 19 | All as Per Srl Item No 18 but 5 to 10 mm dia as in stirrups, spacer etc complete all as specified and as directed |
| 20 | Taking down chowkats or frames with shutters (without taking off shutter from the frames) exceeding 1.5 sqm & not exceeding 4 sqm each complete all as specified and as directed |
| 21 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door ceostory windows & other Frames/chowkhats of size 50x100mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) fabricated with miter joints after applying PVC solvent cement and screws with full body threated star headed SS Screws having minimum frame density of 750Kg/Cum screw withdrawal strength of 2200N (face) & 1100N (Edge), miniumum compressive strength of 58N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S hold fast/Lugsor SS dash fasterners shall paid for separately). Note : For WPC solid door/ window frames, minus 5mm tolerance in dimension i.e depth and width of profile shall be acceptable. Varriation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 22 | S&F factory made single extruded solid UV Rinted decorative type flush door shutter of size 35mm thick comprishing of virgin polymer of K valve 58-60 9suspension grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/cum and screw withdrawal strength 50N/mm2, modulus of elasticty850 N/mm2 and resistance to spread of flame of class A category with property of being termite/borger proof, water/mpisture proof and free retardnat. WPC to be laminated with PVC foil of minimum 14 micronsthick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threated star headed counter sunk SS Screws, complete all as specified and as directed |
| 23 | S&F Factory Made 2nd class harwood plain, framed panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers fitted chowkats complete all as specified and as directed |
| 24 | M&L 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides with both face is covered with deco rative face veneer with lipping/frame to match complete all as specified and as directed |
| 25 | Pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, keys , hinges lock, lock strike plate etc.made out of 1.25mm thick MS sheet including one shop coat of red oxide zinc chrome primer etc complete all as specified and as directed |
| 26 | 2nd Class hard wood 35mm thick factory made glazed and skelton shutters open rebated and prepared to receive glass , gauze,etc (without sash bars) edges of framing plain , chamfered or rounded. Fitted with cut and mitred beads for securing wiremesh supplied and fitted to chowkats complete all as specified and as directed |
| 27 | PCC 1:3:6 type C - 1 (using 20 mm graded crushed stone aggregate) as in back filling of chowkats and bed blocks for hold fasts etc complete all as specified and as directed |
| 28 | Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with 2nd class soft wooden beadings complete all as specified and as directed |
| 29 | S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (both type) 300mm longh, and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed |
| 30 | Floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel springs, fixed in floor with over all length of cover plate 150mm complete all as specified and as directed |
| 31 | M & L for helical door spring complete all as specified and as directed |
| 32 | S&F of aluminium powder coated (minium thickness 50 micron) door shutter, rails (top, middle and style) of size 82.53x44.45mm and bottom rail of size 114.30x44.45mm made out of 1.6mm thick aluminium sheet/section including necessary jointing cleats, glazing clips, rubber packing, mortice lock having six levers, aluminium body hydraulic door closer of suitable size, handles 2 Nos in each shutter, tower bolt, hinges etc, anodised aluminum snap beading screws, complete all as specified and as directed Note PVC Panels & Sheet Glass will be measured and paid separately under respective item |
| 33 | S&F anodised aluminium grill (anodised transparent or dyed to required shade according to IS : 1868 with minimum anodic coating of grade AC 15) of approved design/ pattern, with approved standard section and fixed to the existing window frame with C.P. brass/stainless steel screws@200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and as directed |
| 34 | Aluminium anodized powder coated frame of size 101.60mm x 44.45mm made out of 1.60mm thick aluminium section, weight not less then 1.1kg/RM as in door frame fixed to floor/wall with plugs and screws complete all as specified and as directed |
| 35 | S&F powder coated aluminium sliding window (Two track) consisting of two shutter of glazed and flyproof mesh fixed on external face of window frame.Note :The item shall be included as following :(a) Aluminium powder coated frame of section 63.5 x38.10 mm x 1.02 mm thick with or without rebate.(b) Aluminium powder coated window shutters of section 40 x 18 mm x 1.25 mm thick (Two shutter of glass and one shutter of wiremesh) incl self locking catch & roller etc).(c) 5.5 5mm thick coloured or tinted glass glazing as in aluminium door/ window/ ventilator with aluminium hollow beading/ glazing clip (included with shutters) size 19mm x 17mm made out of 0.70mm thick hollow section weighing not less than 0.97 Kgs/RM including rubber gasket.(d) Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with statinless steel wire staples and aluminium beads.. |
| 36 | S&F of 5.5mm thick glass with 5solar control film 50micron reflective type sticed to glass panes as per instructins of manufacturersas in aluminium door with aluminium hollow beading/glazing clip (included with shutters) including rubber gasket, complete all as specified and as directed |
| 37 | S&F Plain 2mm thick colour PVC Sheet fixed or laid to Aluminium Door by using rubber based adhesive complete all as specified and as directed |
| 38 | Taking down chowkats or frames with shutters (without taking off shutter from the frames) n.exc 1.50 Sqm each complete all as specified and as directed |
| 39 | S&F Box type steel windows comprising of tubular frame and shutters made out of 1.25mm thick MS steel tube, factory made, with double side shutters wire gauged shutter and glass glazed shutter (wire and glass panes shall be measured and paid separately) with side hung shutters with steel handle and steel peg stay dovetailed or welded including 2 Nos tower bolts 150 mm long for each leaf and 12mm square bar grills at spacing as shown on drg welded to F1 frame work, including other fittings, hinges, handles tarred hold fasts PCC blocks etc all as shown on Drawing No CEPZ/TD-354/09 sheet 1/3 to 3/3 including taking down old steel window of any size complete all as specified and as directed |
| 40 | S&F Steel ventilator with top hung shutter including hinges, steel peg stay, lugs as in hold fast with locking arrangements, complete all as specified and as directed |
| 41 | S&F Butt Hinges medium weight cold rolled mild steel of size 100 mm complete all as specified and as directed |
| 42 | 150 mm size mild aluminium handles cast type anodised complete all as specified and as directed |
| 43 | 150mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed |
| 44 | Preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed |
| 45 | Preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed |
| 46 | 75 mm thick, plain cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection etc, finishing surface even and smooth without using extra cement including making joints with bitumastic filling in proportion of bitumen and sand 1:3 by weight complete all as specified and as directed(Note : The concrete shall be laid at a stretch n.exc 3.0 m in length and every turning/ corners. |
| 47 | Preparation of old painted steel surface of any description, over 10 cm in width or girth not other wise described, and applying one coat of synthetic enamel paint complete all as specified and as directed |
| 48 | S&F sheet glass 3mm thick ordinary quality and glazing with oil putty in square n/exc 0.5 Sqm each pane complete all as specified and as directed |
| 49 | M&L 75 mm thick Cement concrete type D2, 1:4:8(using 40 mm graded granite stone aggregate) as in sub base of flooring complete all as specified and as directed |
| 50 | M&L for capillary rise treatment of walls,Base coat: Styrene-Butadiene Latex-based liquid for waterproofing, bond coating, and crack repair to enhance the properties of cementitious mixtures, offering increased strength, durability, and resistance to water, chemicals, and acids. Consumption base coat: 0.3 kg/m2Second and Third coat: Latex of polymer-modified, slurry-based mortar designed for waterproofing concrete and masonryConsumption top coat: 3 kg/m2System requirements: density: 2.00 kg/ltr;compressive strength: 0.5 N/mm2 |
| 51 | M&L for glass fibre reinforced modified cementitious coating system before the final coat of a two component polymer modified cementations water proofing slurry mortar i.e liquid polymer component and a cement based powder with graded aggregates and additives.Base coat: Styrene – Butadiene Latex based liquid used for water proofing.Consumption base coat: 0.3 kg/m2Reinforcement: Glass fiberSecond and Third coat: Two component polymer modified cementitions water proofing slurry mortar. Consumption top coat: 3 kg/m2System requirements: density: 2.00 kg/ltr;compressive strength: 0.5 N/mm2.• Wall penetration through the RCC slab must be sealed using a one component, non-sag, cementations mortar designed for patching and repairing concrete and other cement surfaces. • Intersection of base slab with wall must be provided with a 50 mm fillet using styrene butadiene latex based liquid (modified motor polymer) used for water proofing with a bonding coat of styrene butadiene latex based liquid (modified cement slurry) used for water proofing upto 5ft. • All depressions, unevenness, surface honeycombing shall be repaired using styrene butadiene latex based liquid (modified motor polymer) used for water proofing with a bonding coat of styrene butadiene latex based liquid (modified cement slurry) used for water proofing. Including cleaning of RCC surface to remove dust, loose particles, etc with compressed air or any other suitable technique depending on site conditions, grinding any sharp edges, etc |
| 52 | M&L rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 with water proofing compound tobe finished even and smooth without using extra cement complete all as specified and as directed |
| 53 | Supply only Integral water proofing compound liquid complete all as specified and as directed |
| 54 | S&F 32mm dia Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 laid in as spout pipes to pour out rsidual water out from the treated area.complete all as specified and as directed |
| 55 | M&L for hard core, of broken bricks broken to gauge n exc 63mm for laying as sub basecomplete all as specified and as directed |
| 56 | M&L Cement concrete type D-2 1:4:8 (40mm graded crushed stone aggregate) in foundations, filling and mass concrete in sub basecomplete all as specified and as directed |
| 57 | M&L for 25mm thick PCC (1:2:4) type B1 with 20mm graded aggregate for laying floor tiles complete all as specified and as directed |
| 58 | M&L for non skid coloured Ceramic tiles 8 to 10 mm thick in light shade (square/ rectangular) polished, area of each tiles exc 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set, jointed and pointed with Berger HS tile adhesive anti slip white @1.2kg/sqm thickness upto 8 to 10mm (or equivalent) and epoxy material for sealing of tile joints with Berger HS Epoxy tile grout(or equivalent) to the floor of toilets and bathroom complete all as specified and as directed |
| 59 | Demolition of cement concrete of any description any in any position not otherwise specifically provided for as specified by civil authorities complete all as specified and as directed |
| 60 | S&F Vitreous china squatting pan 'Orissa' pattern long pan size 580 x440 mm white with integral foot rests including 'P' trap (excluding cistern and flush pipe), fixed in repair, complete all as specified and as directed |
| 61 | Vitreous china wash down water closet (pedestal pattern) coloured complete, including connection to drain pipe and to flushing pipe antisyphonage pipe etc, including seat cover fixed in repair, complete all as specified and as directed |
| 62 | S& F low level flushing cistern PVC valveles ,syphonic action type flushing cistern white with inlet valve,float and handle including bracket etc complete all as specified and as directed |
| 63 | S& F in repair chromium plated towel rail 20mm dia and 60 Cm long fixed to wall complete all as specified and as directed |
| 64 | S&F PVC 32mm dia waste pipe with CP coupling, complete all as specified and as directed |
| 65 | Taking up or down 15mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specified and as directed |
| 66 | Taking up or down 20mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specified and as directed |
| 67 | S & F 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and as directed |
| 68 | S&F Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 20 mm, complete all as specified and as directed |
| 69 | S & F in repair15 mm bore chromium plated bib taps fancy type, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed |
| 70 | M&L Cutting chases in brick wall, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sunshades, shelves, lintels etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exceeding 20cm girth complete all as specified and as directed |
| 71 | S&F PVC (SWR) floor trap , plain with CP grating including jointing with solvent cement of 75mm outlet dia complete all as specified and as directed |
| 72 | S&F Fancy type, chromium plated angle valve 15 mm of cast copper alloy with crutch or butter fly handle, screwed down for iron pipe ,fixed in repairs complete all as specified and as directed |
| 73 | S&F Pillar taps 15 mm dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or with out lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe fixed in repairs complete all as specified and as directed |
| 74 | Dismantling water tanks of any description 1000 Ltrs capacity complete all as specified and as directed. |
| 75 | S&F Rotational moulded polyethlene water storage tanks , triple layered, (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of Capacity 1000 litres including over flow , drain out pipe and all accessories complete all as specified and as directed |
| 76 | S&F Ball brass valve, high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed to pipe 20 mm bore fixed in repairs complete all as specified and as directed |
| 77 | Taking down cement plaster on bricks or stone wall / ceiling decayed surfaces of concrete , roof projections or chajjas etc upto triple storey including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 78 | M&L Rendering 10mm thick in cement plaster 1:6 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 79 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement. |
| 80 | M&L Rendering 5 mm thick on concrete surfaces of ceilings in cm 1:3 finished even and smooth without using extra cement complete all as specified and directed |
| 81 | M&L Preparation of new plaster surfaces of ceiling and applying three coats of white wash on ceiling, all as specified and directed. |
| 82 | M&L Preparation of Old plaster surfaces of ceiling and applying two coats of white wash on ceiling, all as specified and directed. |
| 83 | M&L Complete removal of existing treatment on plaster surfaces of walls and applying two coats of oil emulsion distemper over a coat of putty not less than 1.50mm thick and one coat of primer on walls all as specified and directed. |
| 84 | M&L Preparation of new plaster surfaces of walls and applying two coats of oil emulsion distemper over a coat of putty not less than 1.50mm thick and one coat of primer on walls all as specified and directed. |
| 85 | Material and labour for preparation of newly plastered wall surface and applying two coat of premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology, Excellent Dirt Pick up resistance of Berger Paints Ltd or equivalent of other approved make with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over one coat of acrylic water based exterior grade primer @ 0.9ltr(undiluted)/10 sq mtrs diluted with water in 1:1ratio as per manufacture's instruction and all coats incl primer to be applied with fully automatic airlessspray machine of paint application with a flow speed of minimum 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in subsequent coats of paint complete all as specified and directed Make: Berger Paints Weathercoat Long Life Flexo / Nerolac Paints excel Total / Asian Paint Apex Ultima / J.K Maximo ultra Notes for smart periodicals item no 1 to 4: (a) Work shall be done as per MoU between tenderer and manufacturer of paints and their authorized applicator complete all as specified and directed (b) The contractor shall upload MoU between tenderer and manufacturer of paints and their authorized applicator before quoting the bids and submit the same alongwith tender & other Documents as mentioned in NIT. (d) Preparation of plastered or unplastered surface or removal of existing treatment by scrapping of walls, chajjas, ceilings, fins, fascias, parapets etc shall be done by using mechanial sander with internal dust extraction system for clean environment certified by the manufacturer. After the prepartion of surface written approval shall be obtained from GE before applying primer and further treatment/coats. Bldg wise stage passing register shall be maintained. e) Finishes ie cement based paint, acrylic water based exterior grade primer, premium acrylic smooth exterior emulsion etc to walls, ceiling, chajjas, fins, fascias, parapets etc shall be applied using airless spray technology and capable of operating single spray gun with a suitable hose length. the spray machine should be of are putted manufacturer with pro-guard technology and capability of tracking pressure as well as paint and primer usage. (f) This equipment shall be certified by approved manufacturer. (g) The accessories for applying the finishes shall be spray in hard to reach areas and penetration of finishes on the surface so as to achieve uniform application and quality surface finish. Note : (a) The work pertaining to periodical servcies & Water Proofibng shall be executed from authorized applicator through manufacturer of which the materials i.e Paint, Distemper, Cement base paint, putty etc is proposed to be used by the contractor and approved by Garrison Engineer. (b) The contractor shall upload along with the documents under cover-I, 'Memorandum of Understanding' (MOU) with only one manufacturer mentioned in the contract, failing which the bid shall be liable to be rejected. |
| 86 | Material and labour for complete removal of existing treatment including fascias, cornices etc by scrapping with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7\\"/9\\" to make the surface free from dust, loose paint and loose plaster to be completely removed by skilled labour and repair of external wall/Chajjas to be done with repair mortar to get even surface including preparation of old surface of wall/ceiling by filling cracks by Berger Bison Putty / crack fill paste of Berger Paints or equivalent make and make good smoothen surface by sand paper and applying two coats of premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology ,Excellent Dirt Pick up resistance of Berger Paints Ltd or equivalent of other approved make with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over one coat of acrylic water based exterior grade primer @ 0.9ltr(undiluted)/10 sq mtrs diluted with water in 1:1ratio as per manufacture's instruction and all coats incl primer to be applied with fully automatic airless spray machine of paint application with a flow speed of minimum 1 ltr per minute having a pressure of 3300 PSI all as specified and directed.Allow 6-8 hrs to dry the surface in subsequent coats of paint and including necessary scaffolding at any height complete all as specified and directed Make: Berger Paints Weathercoat Long Life Flexo/ Nerolac Paints excel Total / Asian Paint Apex Ultima / J.K Maximo ultraNote : (a) The work pertaining to periodical servcies & Water Proofibng shall be executed from authorized applicator through manufacturer of which the materials i.e Paint, Distemper, Cement base paint, putty etc is proposed to be used by the contractor and approved by Garrison Engineer. (b) The contractor shall upload along with the documents under cover-I, 'Memorandum of Understanding' (MOU) with only one manufacturer mentioned in the contract, failing which the bid shall be liable to be rejected. |
| 87 | Srl Item No 85 & 86 Contd/....Note :-(a) Work shall be done as per 'Memorandum of Understanding' (MOU) between tenderer and manufacturer of paints and their authorized applicator complete all as specified and directed.(b) The contractor shall upload 'Memorandum of Understanding' (MOU) between tenderer and manufacturer of paints and their authorized applicator after conclude of tender and before place of Work Order Documents as mentioned in NIT.(c) The work pertaning to periodical services & water proofing shall be executed from authorized applicator through manufacturer of which the material i.e.paint, distemper, cement base paint, putty etc. is proposed to be used by the contractor and approved by GE. |
| 88 | Material & Labour for RCC chajja/fascia/parapet repair by using following steps :-(a) Removal of existing concrete along with loose damaged and cracked concrete/cover concrete from chajjas etc, exposing corroded steel reinforcements upto a depth of 10mm minimum behind the reinforcement by chipping/hacking with chisel and hammer or by mechanical means like chisel hammer, pneumatic chippers including high pressure water jetting to chipped concrete and reinforcement all as directed by Engineer-in-charge. Hard concrete shall not be removed. However if the rebar is corroded, concrete around it shall be removed.(b) Cleaning the surface of reinforcement bars from dust by using wire brushes and dry cloth and applying FOSROC Rebakleens RR- Rust Remover or equivalent using small brush and allow to react it for 16-24 hrs. (c) Providing and applying two coats of Fosroc Nitozinc Primer - two component, zinc rich epoxy, anti-corrosive protective coating or equivalent by brushes to the exposed and cleaned rebars with an interval of 45minutes to 1 hour @ 40microns DFT / coat and allowed to completely dry for 24 hours all as directed by Engr-in-Charge. |
| 89 | Shower rose of C.P. swival joint of size 125mm for fixing 15mm pipe including fixing to steel pipe or union fixed in repairs all as specified and directed. |
| 90 | PVC connections 15mm dia & 600mm long with PTMT nuts all as spd & directed |
| 91 | S&F powder coated aluminium sliding window (Two track) consisting of two shutter of glazed and flyproof mesh fixed on external face of window frame.Note :The item shall be included as following :(a) Aluminium powder coated frame of section 63.5 x38.10 mm x 1.02 mm thick with or without rebate.(b) Aluminium powder coated window shutters of section 40 x 18 mm x 1.25 mm thick (Two shutter of glass and one shutter of wiremesh) incl self locking catch & roller etc).(c) 5.5 5mm thick coloured or tinted glass glazing as in aluminium door/ window/ ventilator with aluminium hollow beading/ glazing clip (included with shutters) size 19mm x 17mm made out of 0.70mm thick hollow section weighing not less than 0.97 Kgs/RM including rubber gasket.(d) Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with statinless steel wire staples and aluminium beads.. |
| 92 | Looking mirror 1200X600 x 5mm beveled edge mirror of selected quality glass 5mm thick mounted on 6 mm thick AC building board or commercial ply and fixed to wooden plugs with CP brass screws and cup washers etc, fixed in repairs, complete all as specified. |
| 93 | Peg stay Cloth Hanger 30 to 60 cm long between Hangs, fixed in repairs |
| 94 | Complete removal of existing roof treatment such as APP Membrane, Tarfelt and like, and removing from site to a place outside defence land as specified by civil authorities and clean the surface of roof with water and remove dust complete all as specified. |
| 95 | M&L for a one component liquid ,solvent free ,cold applied , water-proofing membrane that is highly elastic and UV resistant with 10 years Warranty .ASTM D 6083-97a Waterproofing and heat reflecting system having following key performance properties:1.UV resistant ,prevent yellowing and weathering2.Highly elastic upto 350% and crack bridging3.Excellent adhesion on porous and non-porous substrates4. Tensile Strength >10 N/mm2 with GeoTextile fleece5. Soler Reflective Index (SRI) more then 109-111 ASTM E1980-11System: First coat:Providing and applying primer over the prepared surface with a liquid water proofing primer specifically designed for use on roofs.Coverage: 0.2kg/m2(with 50% dilution of water)Reinforcement: Geotextile 40 gsmSecond coat: Liquid water proofing compound designed to protect roof from water damage. Consumption: 0.5 kg/m2.Third coat: A one component liquid, solvent free, cold applied, water proofing membrane that is highly elastic and UV resistant.Consumption : 0.8 kg/m2.System buildup-1.5kg/sqm with geotextile of 40gsmFor accessible roof, tiles with screed/ adhesive may be fixed thereafter. |
| 96 | Providing cement concrete type B-0 1:2:4 (using 12.5 mm graded stone aggregate ) in roof padding, roof kerbs or mud stops, rounded or chamfered on edges finished even and smooth without using extra cement . |
| 97 | Dismantling floor, hearth or wall tiling , terrazzo topping on walls including cement mortar , bedding (but no backing) removing serviceable tiles and rubbish off the premises complete all as specified and directed. |
| 98 | M&L for Non Skid joint free ceramic tiles 300 x 300 x 7 to 8 mm thick in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 all as specified and directed. |
| 99 | M&L Glazed ceramic coloured tiles of size 450X 300X 7mm thick as in vertical surfaces such as skirting, dado, wall etc., set and jointed in neat cement slurry and pointed with coloured cement to match over and including 10mm thick rendering in cement mortar 1:4, complete all as specified & directed. |
| 100 | M&L Pre Polished machine cut Green Marble each tiles of area not less than 0.40 Sqm and thickness not less than 18mm as in floor and bedded over 15mm thick screed in cement mortar 1:4, The joints of tiles are to be grouted with epoxy paint of width 5mm to be entire thickness of tiles as well as laying of tiles with epoxy paint over screed bed all as specified and directed. |
| 101 | M&L Pre Polished machine cut Green Marble each tiles of area not less than 0.40 Sqm and thickness not less than 18mm as in skirting and bedded over 15mm thick screed in cement mortar 1:4, The joints of tiles are to be grouted with epoxy paint of width 5mm to be entire thickness of tiles as well as laying of tiles with epoxy paint over screed bed all as specified and directed. |
| 102 | M&L for 18mm thick prpolished green marble single piece as in staircase and laid over 15mm thick screed bed in CM 1:4 and front face rounded off with minimum 2 Nos of Groves all as specified and directed by Engr-in charge. |
| 103 | M&L 20 mm thick granite (of any type any colour) work (table rubbed & polished) in steps, jambs, pillars, window-cills cooking platforms & like including pointing into white cement (1:2) using marble dust with admixture of pigment to match shade of granite laid over and including Screed bed or bedding layer of mortar 15mm thick for laying floor in CM 1:4 finished even & rough to receive top layer, complete all as specified and directed. |
| 104 | PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints fixed to wall including fixing clamps complete all as specified. |
| 105 | S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches. |
| 106 | PVC (SWR) bends any radius 75mm bore all as specified |
| 107 | PVC (SWR) junction single (single T) equal or unequal 75mm bore all as specified and directed |
| 108 | PVC (SWR) bends any radius 110mm bore all as specified |
| 109 | PVC (SWR) junction single (single T) equal or unequal 110mm bore all as specified and directed |
| 110 | S&F Urinal pot half stal with waste pipe, stop cock and PVC connection to be installed in position supported on angles connected to the GI tubing including CP Spreader complete all as specified and directed |
| 111 | S&F QR Scan board on Stainless Steel plate of 4mm thick Of Size (2'x2') having engraving of QR Code fixed with 4(four) Nos of SS Studs and connected item on building etc Complet Job all as specified and directed by Engr-in Charge and Approved by GE. |
| 112 | M&L 20-25mm thick ( upt Slab Thickness Wwall preformed fillers can be bitumen-impregnated fiberboard (commonly adhering to IS1838-1) closed cell polyethylene foam,cork or expanded polystyrene Performance must be non absorbent (5-10%), durable, rot proof and maintaing high compressibility (40-50% recovery) to handle expansion sealant application the top 10-20mm of the joint is left open to apply a sealant ( polyurethane, silicone or bitumen-based) for waterproofing |
| 113 | M&L 0.56mm thick plain aluminium sheeting, Alloy31000 H4 in ridge, hips,valley gutter,drip and straight flashing (length and grith as fixed) |
| 114 | S&F 18mm thick PVC Celuka board without lamination of any colour as in Kitchen cupboard shutters/shelves etc, fixed in repairs, complete all as specified & directed |
| 115 | S&F 18mm thick PVC celuka board with lamination, glossy finish of any colour as in Kitchen cupboard shutters/ shelves etc, fixed in repairs, complete all as specified & directed |
| 116 | S&F Stainless steel designer handle (heavy duty) of 100mm size, fixed to drawers or cupboard shutters, complete all as specifed & directed |
| 117 | S&F Stainless steel designer handle (heavy duty) of 150mm size, fixed to drawers or cupboard shutters, complete all as specifed & directed |
| 118 | S&F Zero crank hinge of size 150mm, heavy duty, soft closing type as in shutter of cupboards in Kitchen, complete all as specified & directed |
| 119 | S&F in repair brass chromium plated 15mm dia concealed with long shank and cup |
| 120 | Dismantling cast iron or reinforced concrete drain pipes of 150mm bore, fixed with walls and taking out of trenches, if required all as specified and directed. |
| 121 | Demolition and breaking up drain pipes 150mm dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar, complete all as specified and as directed. |
| 122 | Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate for 150mm dia bore pipes all as per SSR Part-I specifications, complete all as specified and directed. |
| 123 | M&L Reinforced cement concrete pipes class NP2, 150mm bore laid in trenches and jointed complete with collar in cement all as specified. |
| 124 | Cutting into existing manholes for connecting new drains (internal dia of pipe 200mm), making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for (100/150/200) pipe. |
| 125 | Material and labour for cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armored, electric power cables (heavy duty 1100 Volts grade with stranded aluminium conductor of size 35 Sqmm 3.5 Core, including glands, lugs, nut, bolts, washers as required at site, testing complete all as specified and directed. (For P-489) |
| 126 | Material and labour for cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armored, electric power cables (heavy duty 1100 Volts grade with stranded aluminium conductor of size 16 Sqmm 4 Core, including glands, lugs, nut, bolts, washers as required at site, testing complete all as specified and directed. (For ECHS) |
| 127 | Excavation in trenches not exceeding 1.5 metres wide and not exceeding1.5 metres in depth and getting out in any type of soil complete all as specified. |
| 128 | Returning, filling in, including spreading , leveling , watering and well ramming in layer not exceeding 25cm each layer all as specified. |
| 129 | Removing excavated material not exceeding 50M and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified. |
| 130 | Sand cushioning to underground cables provided with a layer of sand 8cm thick before laying the cable in trenches and 15cm thick after laying the cable in trenches complete all as specified. |
| 131 | S & F Steel pipe glavanized grade of 40 mm core laid in trenches or under ground/floor or road of fixed with pole for protection of cable including clams with bolts nuts and wasers complete ass as specifed. |
| 132 | Sub class ‘B’bricks for covering to cable laid dry flat ,with width equal to the length of brick complete all as specified and as directed. |
| 133 | M&L for Cutting/Boring of road/Hard standing to a size of 30 cm in width and not exceeding 90 cm in depth for laying of protection pipe/water line/Cable including returning filling, Including spreading and providing PCC in 1:2:4 B1 using 20 mm grade stone aggregate for the top 100mm layer, complete all as specified and directed.by Engr-in-Charge |
| 134 | Taking out carefully copper/aluminium point wiring,Light,fan,socket or power complete with all fitting, fixtures such as switch socket out let, ceiling rose ,holder ,regulator,DBs etc including making good the disturbed surface of wall/floors complete |
| 135 | Taking down distribution boards/wooden board ,switch fuse units,steel enclosures for MCB of any type and removing from site all as specified and as directed by the Engineer in charge. |
| 136 | Taking down existing unserviceable submain wiring any size and making good the disturbed surface all as specified and as directed. Please Enable Macros to View BoQ information |
| 137 | Taking down existing unserviceable submain wiring any size and making good the disturbed surface all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysJul 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender