Tender For Welcome Maintenance To Officers Accn Under Age B/R-Ii Under Ge (W) Bareilly
Tender Value
49 Lakhs
Estimated cost
Bid Submission
13 Jul 2026
4 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bareilly → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Welcome Maintenance To Officers Accn Under Age B/R-Ii Under Ge (W) Bareilly
BOQ
| Sl. No. | Item Description |
| 1 | M & L for non- skid ceremic light/coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile 300mm x300 mm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including dismantling of tiles and M&L for screed bed or bedding layer of mortar 15mm thick in cement mortar (1:6) for laying floor finishes complete all as specified and directed. |
| 2 | M & L for non- skid ceremic light/coloured tiles 7 to 8 mm thick (Square / rectangular) area of each tile 400mm x 400 mm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including dismantling of tiles and M&L for screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:6) for laying floor finishes complete all as specified and directed. |
| 3 | M&L for glazed (coloured) ceramic tiles wall 200mmx300mmx7mm thick on vertical faces of walls over and including M&L for 10mm thick rendering in CM (1:4) set jointed in neat cement slurry and pointed in coloured cement to match including taking down old dado/skirting complete all as specified and directed. |
| 4 | M&L for glazed (coloured) ceramic tiles wall 300mm x 450mm x7mm thick on vertical faces of walls over and including M&L for 10mm thick rendering in CM (1:4) set jointed in neat cement slurry and pointed in coloured cement to match including taking down old dado/skirting complete all as specified and directed. |
| 5 | M&L for glazed (coloured) ceramic tiles wall 300mm x 600mm x7mm thick on vertical faces of walls over and including M&L for 10mm thick rendering in CM (1:4) set jointed in neat cement slurry and pointed in coloured cement to match including taking down old dado/skirting complete all as specified and directed. |
| 6 | M&L for vitrified ceramic tiles light shade 8 -10 mm thick (square/rectangular) polished, area of each tiles 600mm x 600 mm as in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement over and including M&L for 15mm thick screed bed 1:6 cement motar including dismantling of floor tiles and screed bed / rendering and hearthing complete all as specified and directed. |
| 7 | All as per serial item no 6 M&L for vertical surfaces including dismantling of tiles and screed bed / rendering andM&L for rendering 10 mm thick in cement mortar (1:4), as in backing layer complete all as specified and directed. |
| 8 | M&L for Vetrified tiles light shade 8 to 10 mm thick (square) polished, size of each tiles 600mm x 1200 mm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement including M&L for screeding 15mm thick in CM 1:6, complete all as specified and directed |
| 9 | All as per serial item No 8 above but for vertical surfaces including plastering 10mm thick in CM 1:4,complete all as specified and directed |
| 10 | S&F 16mm to 18 mm thick granite stone slabs mirror polished of colour and shade as approved by GE, machine cut bedded & jointed with grey cement slurry and pointed in white cement with admixture of pigment to match the shade of granite stone fixed as in steps, jambs, pillars window cills, cooking platforms & the like over and including M&L for screed bed of 15mm thick CM 1:6 etc including dismantling of existing tiles complete all as specified and directed |
| 11 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. |
| 12 | M&L for 15mm thick cement plaster on brick surfaces or concrete surfaces in CM (1:4) including finishing the surface even and fair complete all as specified and directed. |
| 13 | M&L 15mm thick rendering on walls brick or concrete surfaces in cement mortar 1:4 with water proofing compound, including finish even and fair without using extra Cement and including taking down cement plaster on brick wall/stone wall, ceilings etc, racking out joints, hacking for key & scrubbing with water complete all as specified |
| 14 | M&L for preparation of newly plastered surfaces of walls and applying two coat of weather proof exterior emulsion paint complete all as specified and directed. |
| 15 | M&L for 15mm thick cement plaster on brick surfaces or concrete surfaces in CM (1:6) including finishing the surface even and fair and including taking down existing defective cement plaster on brick or stone masonary complete all as specified and directed. |
| 16 | M&L for preparation of newly plastered surface of walls surface and applying Two coats of distemper oil emulsion paint over 1 mm thick wall care putty of complete all specified and directed. |
| 17 | M&L 5 mm thick cement plaster on fair faces of bricks or concrete in ceiling & chajja using CM 1:4 finished even and smooth without using extra cement and including taking down cement plaster on brick wall/stone wall, ceilings etc, racking out joints, hacking for key & scrubbing with water completely complete all specified and directed. |
| 18 | M&L for preparation of newly plastered surface of ceiling including brooming down or steel wire brushing, scrapping down smoke soot moulds, Moss and efflorescent salts and trading oil and greasy spots and applying two coats of distemper oil emulsion over 1 mm thick wall care putty of complete all specified and directed |
| 19 | M&L for preparation of old distempered surface of walls including plugging nail holes with cement based putty,making good surface to match existing surface and applying one coat of distemper oil emulsion paint complete all as specified and directed. |
| 20 | M&L for preparation of old distempered surface of walls including plugging nail holes with cement based putty,making good surface to match existing surface and applying two coats of distemper oil emulsion paint complete all as specified and directed |
| 21 | M&L for preparing of old distempered surface of ceiling and applying one coat of distemper oil emulsion paint including rubbing down old white wash or oil bond complete all as specified and directed |
| 22 | M&L for applying layer of 1mm thick wall care putty on wall/ceiling surfaces including rubbing down the surfaces with sand paper after getting dried to obtain a smooth & even surface complete all as specified and directed. |
| 23 | Complete removal of existing treatment from wall/ ceiling surfaces and rubbing down with sand paper to have even and smooth surfaces complete all as specified and directed. |
| 24 | M&L preparation of old plaster surfaces and applying one coat of white wash on walls including rubbing down old white wash complete all as specified and directed |
| 25 | S&F in repairs Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851mm to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all specified and directed. |
| 26 | M&L for preparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint inlcuding complete all as specified and directed |
| 27 | M&L for preparation of old painted steel surfaces of any description and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 28 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) n. exc 1.5 sqm including removing from the premises complete all as spd and directed |
| 29 | Taking down chowkhat or frame with shutter (without taking off single shutter/ double shutter from the frame)exc 1.5 sqm and n exc 4.00 swm including removing from the premises complete all as spd and directed |
| 30 | Taking down shutter of any description exc 1 sqm and n/exc 2 sqm each including removing from the premises complete all as spd and directed |
| 31 | S & F solid PVC door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube all as specified or as directed. |
| 32 | S&F factory made solid panel PVC door shutter 30mm thick (style) one side prelam pvc in place of plain and another side decorative, consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width strucks inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either to side and as gap insert for top rail & bottom rail panelling to be fitted in MS frame welded/sealed to stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as specified of drawing.complete all specified and directed. |
| 33 | S&F for 105mmx60 mmx 1.25mm thick pressed steel, frames for door with one or more rebates including filing and inner surface of the frame shall be treated with a coat of bituminous paint & compaction with PCC 1:3:6 Type C1 necessary fixing lugs, SS hinges,lock strike plate, 02 x MS bar/flat at bottom of the frame etc, including wooden texture finished paint on the frame surface complete all as spd and directed. |
| 34 | S&F for 125mmx60mmx1.25 mm thick pressed steel, frames for door with one or more rebates including filing and inner surface of the frame shall be treated with a coat of bituminous paint & compaction with PCC 1:3:6 Type C1, necessary fixing lugs, SS hinges, lock strike plate, 02 x MS bar/flat at bottom of the frame etc, complete including wooden texture finished paint on the frame surface all as specified and directed. |
| 35 | S&F 2nd class hard wood chowkhat or frames, plain solid, wrought, framed and rebated on the solid rounded or chamfered, put together with glue pinned at joints all as specified & directed by Engr-in-Charge |
| 36 | S& F for Flush shutters, 30 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides complete all specified and directed. |
| 37 | S&F 2nd class hardwood glazed and Skelton shutters 30 mm thick open rebated and prepared to receive glass, gauge etc(without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, stiles and rails as specified in SSR Part I section 8 clause 8.20 (a) supplied and fitted to chowkhats complete all specified and directed. |
| 38 | S&F Butt hinges, medium weight, Stainless steel and fixed of size 100mm. complete all specified and directed. |
| 39 | S&F aluminum anosided barrel tower bolts 150mm long, of extruded section and fixed.complete all specified and directed. |
| 40 | S&F aluminum anosided handle 150mm long of extruded section and fixed. complete all specified and directed. |
| 41 | M& L for 125 mm long Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all specified and directed. |
| 42 | S&F in repair 300mm size aluminium alloy anodised sliding door bolt with hasp & staple(bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolt and sliding bolt of extruded section or cast alluminium alloy complete all as specified and directed. |
| 43 | S & F of wooden door stoppers between chowkat and shutters including 100mm butt hinges fixed on chowkat complete all as spd and directed |
| 44 | M&L preparation of new wooden surfaces and applying two coats of synthetic enamel paint over one coat of pink primer over 10 cm width or girth complete all specified and directed. |
| 45 | S&F in repairs 140 mm double legged door stopper of aluminium alloy with rubber complete all as specified and directed |
| 46 | S&F in repairs150mm helical door spring complete all as spd and directed Please Enable Macros to View BoQ information |
| 47 | S&F in repairs150mm helical door spring complete all as spd and directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysJul 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender