Tender For Certain Repair To B/R Items In Otm & Md Accn At Zone I & Ii At Umroi Mil Stn Under Ge Umroi
Tender Value
25 Lakhs
Estimated cost
Bid Submission
20 Jul 2026
8 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ri Bhoi → Meghalaya
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Certain Repair To B/R Items In Otm & Md Accn At Zone I & Ii At Umroi Mil Stn Under Ge Umroi-- 1 Taking Down Chowkhats Or Frames With Shutters (Without Taking Off Shutters From The Frames) Exceeding 1.5 Sqm But Not Exceeding. 4.00 Sqm Each Complete All As Specified And Directed. 2 Taking Down Chowkats Or Frames Not Exceeding 1.50 Sqm With Shutters (Without Taking Off Shutters From The Frame) Complete All As Specified And Directed. 3 Taking Down Shutter Of Any Description Exceeding 1.00 Sqm But Not Exceeding 2.00 Sqm Each Complete All As Specified And Directed. 4 Taking Down And Refixing Shutter In Same Opening After Repairing, Area Exceeding 1.00 Sqm But Not Exceeding 2.00 Sqm Complete All As Specified And Directed. 5 S&F Factory Made Solid Pvc Door Frame Of Size 50Mm X 47Mm Made Out Of 5Mm Wood Grain Printed Single Side Prelam Pvc Sheet Used Instead Of Plain Colour Pvc Sheet & Edges Will Be Painted To Match With Prelam Sheet Complete All As Specified And Directed. 6 Supply And Fixing Factory Made Solid Panel Pvc Door Shutter 30 Mm Thick (Style) Consisting Of Frame Made Out Of M.S. Tubes For Top & Bottom Rails. M.S. Frame Shall Be Covered With Heat Moulded Plain Colour Pvc ‘C’ Channel Having A Pvc Sheet Strip Of 20Mm Width Stuck Inside With Solvent Cement For Stiles And Plain Colour Pvc Sheets For Top Rail, Lock Rail & Bottom Rail On Either Side & As Gap Insert For Top Rail & Bottom Rail; Panelling Of Plain Colour Pvc Sheet To Be Fitted In The M.S. Frame Welded / Sealed To The Stiles & Rails With Suitable Pvc Sheet Beading, And Joined Together With Solvent Cement, Suppyling & Fixing In The Frame At Site As Per Specification & Drawing, Etc Complete All As Specified And As Directed.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm but not exceeding. 4.00 sqm each complete all as specified and directed. |
| 2 | Taking down chowkats or frames not exceeding 1.50 sqm with shutters (without taking off shutters from the frame) complete all as specified and directed. |
| 3 | Taking down shutter of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each complete all as specified and directed. |
| 4 | Taking down and refixing shutter in same opening after repairing, area exceeding 1.00 Sqm but not exceeding 2.00 Sqm complete all as specified and directed. |
| 5 | S&F Factory made solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed single side prelam PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with prelam sheet complete all as specified and directed. |
| 6 | Supply and fixing factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppyling & fixing in the frame at site as per specification & drawing, etc complete all as specified and as directed. |
| 7 | S & F anodised aluminium frame, powder coated (minimum thickness 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 8 | S & F anodised aluminium powder coated (minimum thickness 50 micron) door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, lock, hinges, anodised aluminium snap beading screws etc. complete all as specified and as directed. |
| 9 | Supply & fixing sheet glass ordinary quality 5.50mm thick glazing in square/ rectangle not exc 0.50 sqm each pane with oil putty or aluminium beads fixed to steel/aluminium frame, etc. complete all as specified and as directed. |
| 10 | Supply & fixing sheet glass ordinary quality 6.30mm thick glazing in square/ rectangle not exc 0.50 sqm each pane with oil putty or aluminium beads fixed to steel /aluminium frame, etc. complete all as specified and as directed. |
| 11 | Taking down and refixing of aluminium door after repairing including replacement of rubber gasket beading etc complete all as specified and as directed. |
| 12 | S & F in repair 100mm, 4 lever Mortice lock, vertical type complete all as specified and as directed. |
| 13 | S & F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed etc complete all as specified and as directed. |
| 14 | Taking down and refixing of aluminium window after repairing including replacement of rubber gasket beading, lock, roller etc complete all as specified and as directed. |
| 15 | Supply and fixing aluminium anodised (powder coated) three track sliding window frame with shutters with ( 2 Nos glazed and one wire gauzed shutter) including all necessary joining cleats, hold fast, rubber gasket, snap beading and locking arrangements fixed with screws to wall etc. complete and glazing with and including 4 mm thick plain glass to aluminium frame work using rubber gasket and including stainless steel wire cloth of 0.36 mm dia & average width of aperture 1.40mm with staple or suitable fillets wire mesh fitted with screws and washers etc including aluminium grill of thickness 5mm and opening not exceeding 75mmx75mm etc with the following section of frame and shutter complete all as specified and directed:-(a) Sections for shutter:- (i) 'H' section: 39 x 20 x 1.20 mm thick (ii) 'Interlock' section: 39 x 20 x 1.20 mm thick(iii) 'Edge & Bottom' section: 41 x 20 x 1.20 mm thick (b) Section for frame:-(i) Top & Sides: 92 X 29.50X 1.20mm thick (ii) Bottom: 92 X 29.70 X 1.20mm thick |
| 16 | Supply and fixing aluminium anodised (powder coated) ventilator frame (section for frame 63.5 X 38.1X 1.20mm thick) with shutter(section for shutter 41 x 20 x1.2mm thick)(bottom half portion fixed and top half portion with louver) including all necessary joining cleats, hold fast, rubber gasket, snap beading and locking arrangements fixed with screws to wall etc. complete and glazing with and including 4 mm thick frosted glass to aluminium frame work and louver using rubber gasket and fixed with stainless steel wire cloth of 0.36 mm dia and average width of aperture 1.40 mm outside vent with staple and suitable wall angle of size 25.4 x 25.40 x 1.1mm thick and fillets with screws and washers etc including Deco Grill of Model / Design No. DG 104 and 6.3mm thick etc. complete all as specified and as directed. |
| 17 | S & F well-seasoned 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.Note : The rate quoted are deemed to be inclusive of making good to the disturbed surfaces to match the existing surfaces. |
| 18 | S & F mild steel work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges:large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 19 | Material & Labour for PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) for fixing holdfast complete all as specified and as directed. |
| 20 | M & L for prelaminated particle board 18/19mm thick and fixed as in repair to cup board shutter and shelf, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame works complete all as specified and directed. |
| 21 | S&F 100 mm long extruded aluminium alloy handles, fabricated type, anodized complete all as specified and directed. |
| 22 | S&F 100 mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 23 | S&F 100 mm long butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 24 | S&F 75 mm long butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 25 | S & F 100 mm hasp and staples of aluminium anodised, safety type including bolt to hinges plate and fixed with screws complete all as specified and directed. |
| 26 | S & F in repair Door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters up to 1000 mm in width and of weight not more than 80 kg and fixed complete all as specified and directed. |
| 27 | S & F in repairs 20mm dia tubular curtain rod, brass chromium plated brass including chromium plated brackets complete all as specified and directed. |
| 28 | S&F in repair 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets & flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern & fixing/connecting to pipes complete all as specified and directed. |
| 29 | Supply and fixed in repairs vitreous china squatting pan, Orissa pattern of size 580 mm x 440mm white with P or S trap, front or back inlet and integral foot rest (Excluding flushing cistern and flush pipe) complete all as specified and directed. |
| 30 | S&F in repair wash hand basin, white, flat back of size 550 x 400mm excluding pillar taps but including waste coupling, waste pipe and bracket, etc.including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed. |
| 31 | S & F in repair vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed. |
| 32 | Taking down cement plaster of any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed. Please Enable Macros to View BoQ information |
| 33 | Taking down cement plaster of any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysJul 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender