Tender For Addition Alteration To Certain Otm Bldgs At 8Fbsu
Tender Value
43.68 Lakhs
Estimated cost
Bid Submission
13 Jul 2026
6 days left
EMD
87500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
udhampur → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition Alteration To Certain Otm Bldgs At 8Fbsu
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GE (AF), 8FBSU,AF Name of Work: ADDN/ ALTN TO CERTAIN OTM BLDGS AT 8FBSU Contract No: GE (AF) AWA-23/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevant columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. DESCRIPTION OF ITEMS Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | B/R PORTION |
| 3 | Dismantling of plain or corrugated steel sheeting of any gauge, thickness etc in roof coverings/cladding/eave etc, complete all as specified. |
| 4 | S&F galvanised corrugated mild steel sheeting, with two corrugation side lap fixed with 'L' type or 'J' type or cranked hooked bolts with washers in roof, 0.63 mm thick, grade-O quality, with 120 grms/sqm zinc coating and grade 'B' Class 8, complete all as specified and directed by Engineer-in-Charge. |
| 5 | S&F 1.00 mm thick plain, galvanised, mild steel sheeting, in eaves board & straight flashings (length & girth as fixed) with welded and soldered joint to be provided all as specified and directed by Engr-in-Charge. |
| 6 | Taking down (Steel/ Wooden) chowkhats of frames of any description n.exc 1.50 Sqm with shutters (without taking off shutters from the frames) and making good disturbed portion complete, all as specified and directed. |
| 7 | All as per Srl Item No 5.00 here-in-before, but exceeding 1.5 Sqm and n.exc 4 Sqm with shutters (without taking off shutters from the frames) and making good disturbed portion, complete all as specified and directed. |
| 8 | S&F of 2nd class hard wood Plain solid straight chowkhats of wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete including tarring back of surface in contact with walls all as specified & directed |
| 9 | S&F Mild steel hold fast made of flat iron conforming to 410-0 or Fe-310-0, complete all as specified. |
| 10 | PCC 1:3:6 type C-0 (using 12.5mm graded crushed stone aggregate) as in back filling of pressed steel door frame and bed block for hold fast complete. |
| 11 | S&F of 2nd class hard wood 30mm thick glazed and skeleton shutters for doors, open rebated and prepared to receive glass or gauge etc (without sash bars) edges of framing plain chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats with all necessary fittings, complete all as specified and directed. |
| 12 | S&F of 2nd class hard wood 30mm thick glazed & skeleton shutters for windows, open rebated & prepared to receive glass/gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc size of member of shutters as specified in SSR Part-1 Sec 8 Clause 8.24(b) supplied and fitted to chowkats, all as specified. |
| 13 | S&F of 2nd class hard wood 35 mm thick, plain framed, panelled door shutters (single/ double panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated, fitted to chowkats with all necessary fittings all as specified & directed. |
| 14 | M&L for 4.8 mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in each pane including Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/ spring clips, complete all as specified and directed. |
| 15 | S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete. |
| 16 | S&F 125 mm long stainless steel butt hinges medium weight with stainless steel screw complete. |
| 17 | S&F extruded aluminum alloy handles of size 150mm fabricated type anodised complete. |
| 18 | S&F Aluminium alloy anodised barrel tower bolts of extruded section 200 mm long and fixed complete. |
| 19 | S&F Aluminium alloy, anodised, sliding door bolt size 200mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed in repair complete all as specified and directed. |
| 20 | S&F in repairs mild Steel 300mm, ordinary rat tail rod pattern springs including roller & roller plate complete fixed with screw or by welding, complete all as specified and directed. |
| 21 | S&F Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring 150 mm long, complete all as specified and directed. |
| 22 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing the rubbish of the premises complete. |
| 23 | M&L 25 mm PCC 1:2:4 Type B-0 (using 12:5 mm graded crushed stone aggregate) as in sub base floor, complete all as directed and specified . |
| 24 | M&L coloured/printed ceramic tiles 7 to 8 mm thick area of each tiles exc 0.18 Sqm but not exc 0.38 Sqm, laid in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15mm thick bedding layer in cement mortar (1:6) including necessary cutting and waste as per site requirement, complete all as specified and directed by Engineer-in-Charge. |
| 25 | -Ditto- but on vertical surfaces such as skirting including 9 to 10mm thick rendering in cement mortar 1:3 rough finish to receive the tiles, complete all as specified and directed. |
| 26 | Demolition of cement concrete to ground floor(unreinforced) and paving n.exc 15 Cm thickness (below or above ground level) and removing rubbish of out side MOD land, complete all as specified and directed. |
| 27 | M & L 75 mm thick PCC (1:3:6) type C-2 using 40 mm graded crushed stone aggregate as in plinth protection even and smooth without using extra cement, complete all as specified and directed. |
| 28 | M&L 100 mm thick cement concrete 1:2:4 Type B-2 (using 40 mm graded crushed stone aggregate) as in sub base, hard standing of flooring, complete all as specified and directed. |
| 29 | M&L Chequered cement concrete tiles 25cm x 25cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and no pigment and including screed bed of 20 mm thick in cement mortar (1:4) etc., complete all as specified. |
| 30 | Dismantling wall and ceiling boards (fibre pulp, insulation, etc) or insulation board/ slabs/ blankets any thickness including grid work/aluminium frame work, cover fillets, complete all as specified. |
| 31 | M&L for Prelaminated particle board 12 mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination as in false ceiling fixed with screws to timber frame, complete all as specified. |
| 32 | M&L for 6 mm thick cover fillets of standard hard board, 40 mm wide, fixing with screws, complete all as specified and directed. |
| 33 | S&F in repairs, 18 mm thick prelaminated one side with decorative choice lamination & other side balancing white lamination with teak finished with nails /screws as in cupboards/ partition shelves/shutters including locking arrangement, complete all as specified and directed. |
| 34 | 1.5 mm thick stainless steel telescopic channel of size 30 mm wide for sliding drawer at extended length with all necessary fixing arrangement to the drawer/ wall, complete all as specified and directed. |
| 35 | S & F continuous (piano) hinges mild steel, 40 mm width of flaps (when open), bright finish or electro galvanised in repair. |
| 36 | S&F for size 75 mm Brass handles, cast type, polished bright, complete all as directed by Engr-in-Charge. |
| 37 | S&F for ball catcher for cupboard/cabinet etc, complete all as specified and directed. |
| 38 | S&F 75mm size hasp & staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws as in cupboards etc, complete all as specified and directed. |
| 39 | S&F 0.6 m long stainless steel 12-16 mm size round closet rod with end supports fixed with screws as in cloths hanger holder, complete all as specified and directed. |
| 40 | S & F in repair curtain rails of stainless steel with fixing brackets, stops, rollers, funnels etc complete. |
| 41 | Demolition of brick or stone boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone works and precast concrete articles, complete all as specified and directed |
| 42 | M&L Brick work with sub class B bricks ,straight or curved on plan exc 6m mean radius built in cement mortar 1:6, complete all as specified and directed. |
| 43 | Brick work with old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 (1 cement : 4 coarse sand), all as specified. |
| 44 | Taking down Cement Plaster, any description on Brick Walls or on Concrete Surfaces including raking out Joints, hacking for Key, scrubbing down with Water, etc, and removing same from the Site(s), complete all as specified and as directed. |
| 45 | M&L for rendering 10 mm thick on fair faces of concrete/brick interior surfaces in cement mortar 1:6 as per manufacturer's instruction, finished fair and even without using extra cement, complete all as specified and directed. |
| 46 | M & L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 on wall surfaces, finishing the surface even and smooth without using extra cement, complete all as specified. Note:- Integral water proofing compound shall be measured and paid for separately. |
| 47 | Supply only Liquid water proofing compound ISI Marked (used 200 ml per bag of cement), complete all as specified and directed. |
| 48 | M&L preparation of newly plastered wall surface and applying of Birla/JK white wall putty approx 3 mm thick in two layer as per manufacturer's instruction on existing prepared surface and make the surface smooth by rubbing with sand papers and applying two coats of oil emulsion distemper over a coat of primer, complete all as specified and directed. |
| 49 | Preparing new plastered or un-plastered surfaces of walls and applying two coats Acrylic exterior emulsion paint in camouflaging (Disruptive) pattern (Green, Grey & Brown colour) over a coat of acrylic primer, complete all as specified and directed. |
| 50 | M&L for Complete removal of existing treatment of old decorated plastered or un plastered surfaces of wall including preparation of surfaces by filling cracks/holes with white putty and applying two coats of Acrylic washable distemper over a coat of primer, complete all as specified and directed. |
| 51 | Preparing old plastered or un-plastered surfaces of walls by scraping the surfaces, brooming down or steel wire brushing down smoke soot, mould, moss and efflorescence salts and trading oil and greasy spots etc and applying one coat of exterior acrylic emulsion paint in camouflaging (Disruptive) pattern in three colours (Green, grey and brown), complete all as specified and directed. |
| 52 | Preparation of new surfaces of steel or iron work or CGI/ PGI sheeting in walls or roofing, over 10cm width or girth, not otherwise described and applying two coat of synthetic enamel paint in camouflaging (Disruptive) pattern in three colours (Green, grey and brown) over a coat of acrylic primer, complete all as specified and directed. |
| 53 | Preparation of old painted surfaces of steel or iron work or CGI/ PGI sheeting in walls or roofing, over 10 Cm width or girth, not otherwise described and applying one coat of synthetic enamel paint in camouflaging (Disruptive) pattern in three colours (Green, grey and brown), complete all as specified and directed. |
| 54 | M& L preparation of new wooden surfaces of any description, over 10 Cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 55 | M& L for preparation of old wood and Wood based surfaces, of any description, not otherwise described over 10 Cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 56 | M&L for preparing of new or previous untreated steel surfaces over 10 Cm width or girth and making good including primer and make the surface smooth by rubbing with sand papers etc and applying two coat of synthetic enamel paint, complete all as specified and directed. |
| 57 | M&L for preparing of old painted steel surfaces over 10 Cm width or girth and making good with & including by necessary red lead putty and make the surface smooth by rubbing with sand papers etc and applying one coat of synthetic enamel paint on old prepared surfaces of steel, complete all as specified and directed. |
| 58 | S&F 1600mmx600mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 59 | Excavation in post holes (or similar holes ) each n. exc 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layer n.exc 25cm, watering and removing surplus soil to a distance n. exc 50M and making good surfaces in any type of soil. |
| 60 | M&L cement concrete in foundation filling and mass concrete type D2 1:3:6 (using 40mm graded crushed stone aggregate) in post holes all as specified. |
| 61 | M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, complete all as specified and directed. |
| 62 | S&F in repairs 4mm dia of plain mild steel wire, galvanised class 3, in fencing including straining and fixing to wood, concrete or steel posts and / or to straining bolts, including securing with and provision of galvanised iron staples or steel pins, etc as directed (each line of wire to be measured). |
| 63 | S&F Anodised aluminium frame for doors, windows and ventilator with one or more rebates including joining cleat for fixing etc., complete all as specified |
| 64 | S&F anodised aluminium door shutters, aluminium section weighing 1.10 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc., complete all as specified. |
| 65 | Anodised aluminium window and ventilator shutters, fixed type without sash bars, aluminium sections weighing of 0.55 Kg/RM including fixed with aluminum beading, silicon lining and gaskets, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc, complete all as specified and directed. |
| 66 | M&L for 12 mm prelaminated particle board both side decorative, fixed with aluminium beading and rubber neoprene packing to aluminium frame, complete all as specified. |
| 67 | E/M PORTION |
| 68 | Taking down carefully aluminium/copper point wiring (light, bell, fan, socket) complete including fixture and fittings such as switches, ceiling roses, regulators, sockets, holder, fittings and terminal box sheets complete, stacking material at site and making good the disturbed surface of walls/ floors to match with existing surface, complete all as specified and directed by Engr-in-Charge . |
| 69 | M&L for point wiring with two single core PVC insulated, unsheathed, FRLS type, 1100 volts grade, multistranded copper conductor cable 1.5 sqmm in and including PVC casing caping ISI marked with all connected accessories including one single core multistanded PVC insulated, unsheathed, FRLS type, 1100 volts grade,1.5 sqmm copper conductor cable unsheathed as earth continuity cable including concealed modular plate of suitable way for mounting of modular switches, socket, fan regulators, connected to common earth dolly complete all as specified for the following:- (a) One light /fan/ point controlled by one nos, one way 5/6 Amps switch. |
| 70 | All as per srl item No 68.00 here-in-before but using one 3/5 pin socket outlet, 5/6 Amp on the same board controlled by one nos, one way switch. |
| 71 | All as per srl item No 68.00 here-in-before but using one 3/5 pin socket outlet, 5/6 Amp, independent controlled by one nos, one way switch. |
| 72 | All as per srl item No 68.00 here-in-before but using cable of size 2.5 Sqmm (for phase & neutral) and 2.5 Sqmm as continuous earth cable for 15/16 Amps socket outlet, independent controlled by one nos, one way switch, complete all as specified. |
| 73 | S&F in replacement of modular type switch one way, SP, flush type, 5/6 Amps, 230 volts AC, 50 Hz, complete all as specified. |
| 74 | S&F in replacement of modular type socket outlet flush type, 3 pin 2-in-1, 5/6 Amps, 230 volts AC, 50 Hz, multipurpose type, complete all as specified. |
| 75 | S&F in replacement of modular type switch socket combination flush type, 2-in-1 3 pin, 6/16 Amps, 230 volts AC, 50 Hz, multipurpose type, complete all as specified. |
| 76 | S&F in replacement of electronic type ceiling fan regulator, 230 volts, single phase, flush type complete all as specified. |
| 77 | S&F in replacement of ceiling rose 3 terminals, PVC/polycarbonate/bakelite, isolated body 230 volts AC, 50 Hz, complete all as specified. |
| 78 | S&F in replacement of wiring for submain with PVC insulated unsheathed copper conductor cable, multi stranded, single core, FRLS type, 1100 volts grade 2 x 6 Sqmm complete drawn in ISI marked casing caping with accessories along with 1x 6.0 Sqmm PVC insulated unsheathed copper conductor cable, multi stranded for continuous earth wire including making good the disturbed surface, complete all as specified. |
| 79 | S&F in replacement of sheet metal enclosure DB TPN 4 way, double door, 415 volts AC, surface mounting complete with suitable busbar, neutral link & earth link suitable for MCB TP/TPN as incomer & MCB SPN as outgoing complete all as specified. |
| 80 | S&F in replacement of MCBs, TPN, 40-100 Amps, 415 volts, 10 kA rupturing capacity, C curve type, complete all as specified and directed. |
| 81 | S&F in replacement of sheet metal enclosure DB SPN 8 way, double door, 240 volts AC, surface mounting complete with suitable busbar, neutral link & earth link suitable for MCB DP/SPN as incomer & MCB SP as outgoing, complete all as specified. |
| 82 | S&F in replacement of MCBs, SP, 6-32 Amps, 230 volts,10 kA rupturing capacity, C curve type, complete all as specified. |
| 83 | S&F in replacement of MCBs, SPN, 40-63 Amps, 230 volts, 10 kA rupturing capacity, C curve type, complete all as specified. |
| 84 | S&F in replacement LED tube light fitting 1x20 watts, 220 volts AC, 1200 mm, with aluminium housing & integrated electronic driver complete with driver with polycarbonate diffuser & thd< 10% including connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose, complete all as specified. |
| 85 | S&F in replacement of LED bulk head light fittings weather proof, anti corrosion wall/ceiling mounted opel colour decorative, round shape/ oval shaped with PC cover suitable for & including 7 watts LED lamp, lamp holders, complete with all accessories all as specified. |
| 86 | M&L for plate earthing complete with galvanized mild steel plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (in earth pit not less than 2.25 meter deep below ground level) with the top edge of earth plate at a depth not less than 1.5 meter below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and including GI wire 4 mm bolted (with GI nuts, bolts & check nuts) and riveted to earth (Plate) electrode at one end and connected to main switch board /panel/ test point at the other including watering GI pipe (medium grade) 20 mm bore from bottom of earth pit to top of electrode and 20 mm GI pipe light grade for earth strip protection complete with earth pit in PCC 1:2:4 type B0 using 12 mm graded crushed stone aggregate, RCC cover, funnel, wire mesh including necessary excavation and earth work in any type of soil, returning filling in and removal of surplus soil, complete all as specified. |
| 87 | Supply and fixing factory made uPVC white colour three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50 m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 + 0.2 mm and single glazing bead/ double glazing head of appropriate dimension, comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanızed mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 Kg) G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame and sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wire mesh shall be paid separately) Note: For uPVC fame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 88 | Note :- An amount of Rs. 31,715.00 on account of credit schedule for Sch 'A' Part-II Shall be deducted from the total amount of BOQ to arrive at the contract sum. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysJul 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender