Tender For Repair To Certain Otm Accn At Afs Ad Ur
Tender Value
34.98 Lakhs
Estimated cost
Bid Submission
13 Jul 2026
4 days left
EMD
69960
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalandhar → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair To Certain Otm Accn At Afs Ad Ur
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of Concrete in ground floors and paving n.exc 15 cm thickness (below or above ground level), cement concrete ( un reinforced), etc complete all as specified and directed. |
| 2 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 3 | Demolition of Concrete of any description and in any position not otherwise specifically provided for, cement concrete ( un reinforced), etc complete all as specified and directed.( For sunken) |
| 4 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, etc complete all as specified and directed. |
| 5 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.50 Sqm each complete all as specified and directed. |
| 6 | S&F 150 mm long aluminium anodized barrel tower bolts of extruded section, fixed as in repairs, complete all as specified and directed. |
| 7 | S&F 125 mm long, aluminium anodized, door handle, fixed in repairs, complete all as specified and directed. |
| 8 | Taking down shutter for , easing, adjusting of old wooden shutters of any description exc. 1 Sq,m and not exc. 2 Sq.m each and refixing in same opening after tiling work complete all as specified and directed. |
| 9 | Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 10 | M&L for RCC 1:2:4 type B-0 (Using 12.5 mm graded stone aggregate)as in chajjas / cooking shelves/platform etc. complete all as specified and as directed. |
| 11 | M&L for cement concrete (1:5:10) type E-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed. |
| 12 | M & L for brick work using bricks old size bricks /fly ash bricks as specified in straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar (1:6), complete all as specified. |
| 13 | M & L for brick work half brick thick wall using Fly ash bricks bricks as specified in straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar (1:4), complete all as specified and directed. |
| 14 | M&L for Cutting chases pinning in making good to facing where required and pointing in cement mortar (1:3) for concealed water tubing in brick walls cutting n.exc 10 cm girth. complete all as specified and directed. |
| 15 | Cutting holes into or through reinforced cement concrete slabs, chajjas, etc. with reinforcement is cut through exc 100Sqcm but n exc. 250Sqcm Superficial area complete all as specified and directed. |
| 16 | S & F mild steel chrome finish handles suitable of cabinets/cupboards 100 mm size complete all as specified and directed. |
| 17 | S &F Magnetic cathers suitable of cabinets/cupboards complete all as specified and directed. |
| 18 | S&F 100mm long butt hinges mild steel medium weight cold rolled complete all as specified and directed. |
| 19 | S&F in repairs Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and directed |
| 20 | S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 21 | M & L for 0.9 mm thick, Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed. |
| 22 | M & L for 18 mm thick, No of ply 12, plywood, grade BWP, type BB with one side decorative laminate fixed with screws to timber frame work ,complete all as specified and directed. |
| 23 | Supply & fixing forb 20mm wide & 0.5 to 0.80 mm thick PVC EDGE BENDING of PVC pasted on edges with suitable adhesive , complete all as specified and directed. |
| 24 | S&F Factory made solid PVC Door frame of size 50mm x 47mm made out of 5mm thick wood grain finished colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening, complete all as specified and directed. |
| 25 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded wood grain printed PVC Sheet & 5mm thick x 15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mmx10mm (90 Degree)used instead of exposed portion of PVC sheet beading & PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and a gap insert for top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site all as specified in SSR part-II 2020 Section-8, clause 8B.1 to 8B.2.1 and shown on drawing in page No 146 of SSR part-II 2004. |
| 26 | M&L for rendering 15 mm thick (Average thickness) rendering on sunken surfaes including flashings, finished even and fair in cement mortar (1:4), using water proofing compound as per recommended ratio, after brushing cement slurry @ 1.20 kg/Sq. m, complete all as specified. NOTE: Supply only WPC will be measured & paid for separately under respective item of BoQ. |
| 27 | Clean the sunkun/ lowered portion of RCC Slab surface for full depth of sunkun floor by wire brush. Chisel out any mortar sticking the surface and applying FOSROC Nitoproof 600PF (minimum 0.8 mm dft) over a priming coat of Nitoproof WB Primer or equivalent product of asian paints, M/s MC Bauchemie/CIPY/ SIKA/ Pidilite/ DR Fixit/ Thermex STP applied as per manufacturers instructions and full vertical sides of sunkun floors. FIll it with water and check for dampness and seepage. In case the slightest indication of seepage/ leakage to be noticed, the same shall be rectified by injection grouting to seal all cracks or application of polymer modified mortar FOSROC nitobond SBR or equivalent of M/s MC Bauchemie/CIPY/ SIKA/ Pidilite/ DR Fixit/ Thermex STP/ Asian Paints admixed with integral WPC or cementitious crystalline waterproofing compound in the affected area to steal all cracks and micro cracks if any, and this shall be done by contractor at his own cost. All junctions points of side walls where CI/GI pipes are passing through shall be sealed with epoxy cementy mortar. |
| 28 | S & F for uPVC pipes, 110 mm external dia pipe, type-A, ISI marked (IS:13592) single socketed in any length with rubber ring joints, fixed wall as SWR / rain water pipes, IN REPAIR, complete all as specified and directed. |
| 29 | M&L for 75 mm thick, cement concrete type C-1, 1:3:6 using 20 mm graded stone aggregate, finished even & smooth without using extra cement, as in plinth protection, and joints shall be sealed with joint sealing comound grade 'A' complete all as specified and directed. |
| 30 | M&L for Granite jet black shade, 15-18 mm thick,as in step, jambs, cooking platform and like, machine cut, machine polished, bedded and jointed with grey cement slurry & pointed with grout of matching shade including necessary cutting over & including 10 mm thick (average thickness) cement mortar (1:4), complete all as specified and directed. |
| 31 | Rounding of / moulding to edges (half round) of stone of any description including rubbing and polishing (Granite finish), complete all as specified and directed. |
| 32 | M&L for machine cut kota stone slab flooring 20-25mm thick over and including 15mm cement mortar (1:4) screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 33 | M&L for 25 mm thick, cement concrete type B-0, 1:2:4 using 12.5 mm graded stone aggregate, finished rough, as in sub floors or similar locations, complete all as specified and directed. |
| 34 | M&L for glazed ceramic coloured tiles 450x 300x7-8 mm or 600mm x 300mm x 7-8 mm thick on vertical surfaces as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 10mm thick rendering in cement mortar (1:4) including necessary cutting as per site requirement complete all as specified and directed. |
| 35 | M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exc. 0.08 sqm but n. exc. 0.18 sqm laid in floors etc , set and jointed in neat cement slurry and pointed in white or coloured cement with pigment to match the shade of tile laid over and including 15 mm thick bedding layer in cement mortar (1:4) including necessary cutting and waste as per site requirement complete all as specified and directed. |
| 36 | M&L for repairing of RCC projection chhajjas, roof, facia etc by necessary preparation. Scraping cutting, chiseling derusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC with cement concrete (1:1.5:3) using 20mm graded stone aggt and reinforcement with welded mesh of weight 2 Kg per Sqm but n.exc 3 Kg per Sqm (if reqd) with or without facia and finished with cement and sand mortar (1:3) using coarse sand and work in patches area n.exc 5 Sqm and thickness of RCC member n.exc 70mm incl necessary formwork and applying two coats of finishes to match with the existing surfaces at any height complete all as specified and as directed by Engr-in-Charge. (The rate quoted by the contractor shall included for scaffolding and necessary formwork upto triple storey bldg). |
| 37 | M&L for rendering 5 mm thick on fair faces of concrete surfaces, finished fair and even on ceiling surfaces in cement mortar (1:3), complete all as specified and directed. |
| 38 | M&L for rendering 15 mm thick on fair faces of concrete surfaces, finished fair and even on wall surfaces in cement mortar (1:6), complete all as specified and directed. |
| 39 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:4) with water proofing compound as manufacturers instruction complete all as specified and directed.Note:- WPC shall be mesured and paid seperately |
| 40 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:4), upto 03 storey buildings using scafholding, including provison of chicken type mesh where required at junctions etc mixed with water proofing compound as manufacturers instruction complete all as specified and directed.. Note:- WPC shall be mesured and paid seperately |
| 41 | Supply only water proofing compound, ISI marked, complete all as specified and directed. |
| 42 | M & L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash on ceiling, complete all as specified and directed. |
| 43 | M&L for prepration of new plasterd wall surfaces of any description complete all as specified and applying the following: -(a) Applying wall care putty, in two coats & smoothening the surfaces with sand papers/ mechanized sanding etc., (preparatory to paint as directed). (b) Two coats of interior acrylic emulsion over and including a coat of acrylic emulsion primer. |
| 44 | M&L for one coat of white wash on old ceiling surfaces, including preparation of surfaces, complete all as specified and directed. |
| 45 | M&L for prepration of newly plastered wall surfaces of any description Applying wall care putty, in two coats & smoothening the surfaces with sand papers/ mechanized sanding etc., and applying the Two coats of exterior acrylic emulsion over and including a coat of acrylic emulsion primer complete all as specified and directed. |
| 46 | M&L for preparation of old plastered/unplastered old decorated surfaces of walls, pillars, cornices by brooming down or steel brushing, scraping down smoke roots. moulds , moss and efflorescence salts, trading oil greasy spots & by removing existing treatment by scrapping down with mechanical vaccum mechanism) having RPM between 600-1500 , sanding paper of 60/80 grit having dia of 7\\"/9\\" to make the surface free from dust , loose paint etc. by skilled labour and applying two coat of acrylic distemper over a coat of wall care putty after removal of nails & filling with putty on wall surfaces complete all as specified and directed. |
| 47 | M&L for two coats of exterior acrylic emulsion over a coat of exterior (water based) primer on old wall surfaces for height not exceeding 15 metre, including complete removal of existing treatment and preparation of surfaces, complete all as specified and directed (The rate quoted by the contractor shall included for scaffolding and necessary formwork upto triple storey bldg). |
| 48 | M & L Two coats of synthetic enamel paint over & including a coat of red oxide primer over steel & iron (new) surfaces of any description, not otherwise described, over 10 cm in width or girth, including preparation of surfaces complete all as specified and directed. |
| 49 | S&F in replacement steel tubes ‘medium grade’, galvanized with all fittings and fixed to walls and ceilings or laid in floors, of size 15 mm bore complete all as specified and directed. |
| 50 | S&F in replacement steel tubes ‘medium grade’, galvanized with all fittings and fixed to walls and ceilings or laid in floors, of size 20 mm bore complete all as specified and directed. |
| 51 | Disconnecting existing tanks of capacity exceeding 500 litre but not exceeding 1000 litre, setting aside (or lowering if required) for cleaning/roof repair etc. and hoisting, reconnecting and re-fixing in position after necessary cleaning by removing all scale and dirt etc. including cleaning mouth of circulating service pipes complete all as specified and directed. |
| 52 | S&F in repair 1000 litre capacity three layered polyethylene water storage tanks (cylindrical vertical with closed top) including hoisted and fixed in position, making connections, complete all as specified including the following accessories: -(i) PTMT ball valves, high pressure, with epoxy coated aluminium rod & high density plastic ball complete screwed for iron pipe or brass ferrule and fixed, suitable for 20 mm bore GI pipe, , complete all as specified.(iii) Gun-metal stop valve (quarter turn type) with MS lever handle, suitable for GI tubes 20 mm bore, ISI marked, screwed both ends for iron pipe, complete all as specified.(iv) Provn of 20 mm bore GI light grade tube from O/H tank to nearest mouth of RWP |
| 53 | S&F in repair concealed stop valve/cock, cast copper alloy, chromium plated, with wall flange, quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe complete all as specified and directed. |
| 54 | S&F in repair angular stop valve/cock, cast copper alloy, chromium plated, with wall flange, quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, complete all as specified and directed. |
| 55 | S&F in repair Bib tap, cast copper alloy, chromium plated fancy type, long body with wall flange, quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, complete all as specified and directed. |
| 56 | S&F in repair Wall mixer telephonic, with crutch with (provision for and including hand shower), cast copper alloy, chromium plated, quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, complete all as specified and directed.. |
| 57 | S&F in repair Pillar taps, brass chromium plated, fancy type, foam flow, screwed down high pressure screwed for iron pipe 15mm bore, complete all as specified and directed. |
| 58 | S&F in repair 125 mm size overhead ABS shower with cast copper alloy chromium plated arm 225 mm long with flange and fixed in position, complete all as specified and directed. |
| 59 | S&F in repair Corner glass shelf, 5mm thick glass, 9\\" wide, fixed with suitable mild steel CP brackets, nuts & bolts, complete all as specified and directed. |
| 60 | S&F in repair Vitreous china EWC (Pedestal pattern) type white complete including plastic WC seat cover white closed pattern with flat bottom and MS chromium plated hinging device complete all as specified. complete all as specified and directed. |
| 61 | S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe etc. complete including making good to floor, complete all as specified and directed. |
| 62 | S&F in repairs PVC flushing cistern 10 ltr capacity valve less symphonic action type low level with and including ball valve float & handle, flush pipe, waste pipe & brackets complete set complete all as specified and directed. |
| 63 | S&F in repair 32mm size PVC waste/discharge pipe, complete all as specified and directed. |
| 64 | S&F in repair Vitreous China wash basin, Counter Type, white, oval shape of size 560 x 410x180 mm including fixing accessories like 32mm dia CP waste coupling half or full threaded, BOTTLE Trap & including 32 mm size PVC discharge pipe, complete all as specified and directed. |
| 65 | S&F in repair Vitreous China urinals, Full Stall, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed. |
| 66 | S&F in repair PVC connections 15 mm size of length 450 mm with PTMT nuts, complete all as specified and directed. |
| 67 | S&F in repair stainless steel grating doom 125 mm dia size with waste hole complete all as specified and directed. |
| 68 | S & F in repair bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with CP brass screws and cup washers complete all as specified and directed. |
| 69 | S & F in repair Brass chromium plated, tubular towel rails 20 mm dia, D- type, 60 cm long between flanges, completed all as specified and directed. |
| 70 | S&F in repair 100mm dia uPVC / PVC floor trap with grating including jointing with solvent and embedding in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 71 | S&F in repairs uPVC/PVC bends any radius, complete all as specified. suitable for uPVC soil waste discharge pipes, of size: 110 mm external dia complete all as specified and directed. |
| 72 | S&F in repair uPVC/PVC Single 'T' any radius, complete all as specified. suitable for uPVC soil waste discharge pipes of size 110 mm external dia complete all as specified and directed. |
| 73 | S&F Sheet glass 4mm thick ordinary quality and glazing with oil putty or wooden beads in squares n. exc. 0.5 Sq.mm in each pane complete all as specified. |
| 74 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided all as specified. |
| 75 | Demolition of stone slabs , kota stone/Granite slab of any description or thickness in floor etc complete all as specified and directed. |
| 76 | Dismantling boarding any Description fixed in any position with screws complete all as specified and as directed. |
| 77 | Dismantling wrought iron or mild steel work of any description in any position complete all as specified and as directed. |
| 78 | Notes: Amount of credit for retrieved materials is mentioned in tender documents in pdf form which will be deducted while acceptance of tender offline. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysJul 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender