Tender For Addition/Alteration To Toilets At Certain Locations At 8Fbsu
Tender Value
43.68 Lakhs
Estimated cost
Bid Submission
13 Jul 2026
0 days left
EMD
87500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
udhampur → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition/Alteration To Toilets At Certain Locations At 8Fbsu
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GE (AF), 8FBSU,AF Name of Work: ADDITION/ALTERATION TO TOILETS AT CERTAIN LOCATIONS AT 8FBSU Contract No: GE (AF) AWA-20/202-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevant columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Conversion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | B/R PORTION |
| 3 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing the rubbish of the premises complete. |
| 4 | M&L 25mm PCC 1:2:4 Type B-0 (using 12:5 mm graded crushed stone aggregate) as in sub base floor , complete all as directed and specified . |
| 5 | M&L coloured/printed non skid ceramic tiles 7 mm thick (square/rectangular) area of each tile exc 0.11 but not exc 0.16 sqm laid in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15mm thick bedding layer in cement mortar (1:6) including necessary cutting and waste as per site requirement, complete all specified and directed. |
| 6 | M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/shade) of 450x300x7mm / 350x 250x 7 mm / 450X 350X 7mm thick in vertical surfaces, as in dado/skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 7 | M&L for 18-20mm thick granite stone (slab) of any colour/type, (table rubbed and polished) work as in floors/ vertical surfaces, cooking platforms and like, set in neat cement including pointing in white cement with admixture of pigment to match with shade of granite, complete laid over and including 15mm thick screed bed in cement mortar (1:6) laid and jointed with gray cement slurry mixed with pigment, complete all specified and directed. |
| 8 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar work complete all as specified. |
| 9 | Demolition of cement concrete to ground floor(unreinforced) and paving n.exc 15cm thickness (below or above ground level) and removing rubbish of out side MOD land, complete all as specified and directed. |
| 10 | M & L 75 mm thick PCC (1:3:6) type C-2 using 40mm graded crushed stone aggregate as in plinth protection even and smooth without using extra cement complete all as specified and directed. |
| 11 | M&L 100mm thick Cement concrete 1:2:4 Type B-2 (using 40mm graded crushed stone aggregate) as in sub base of flooring complete all as specified and directed. |
| 12 | M&L Chequered cement concrete tiles 25cm x 25cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and no pigment and including screed bed of 20mm thick in cement mortar (1:4) etc.complete all as specified. |
| 13 | S&F for 60 mm thickness machine pressed precast concrete interlocking paver block with grey cement and no pigment, shape and size confirming to IS 15658-2006 M-35 grade over completed all as specified and directed. |
| 14 | Supply only fine aggregate (sand) for sand cushioning as in bed complete all as specified & directed. |
| 15 | Plain cement concrete type B1, (1:2:4), using 20 mm graded crushed stone aggregate as in benching, copping, surface channels and other similar nature of work etc. the like including necessary form work and finishing all exposed surface of concrete including demolition of cement concrete any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 16 | Dismantling of plain or corrugated steel sheeting of any gauge, thickness etc in roof coverings/ cladding/ eave etc complete all as specified. |
| 17 | S&F galvanised corrugated mild steel sheeting, with two corrugation side lap fixed with 'L' type or 'J' type or cranked hooked bolts with washers in roof, 0.63mm thick, grade-O quality, with 120 grms/sqm zinc coating and grade 'B' Class 8, complete all as specified and directed by Engineer-in-Charge. |
| 18 | Preparation of new surfaces of steel or iron work or CGI/ PGI sheeting in walls or roofing, over 10cm width or girth, not otherwise described and applying two coat of synthetic enamel paint in camouflaging (Disruptive) pattern in three colours (Green, grey and brown) over a coat of acrylic primer complete all as specified and directed. |
| 19 | Taking down (Steel/ Wooden) chowkhats of frames of any description n.exc 1.50 sqm with shutters (without taking off shutters from the frames) and making good disturbed portion, complete all as specified and directed. |
| 20 | All as per Srl Item No 18 here-in-before, but exceeding 1.5 Sqm and n.exc 4 Sqm with shutters (without taking off shutters from the frames) and making good disturbed portion complete all as specified and directed. |
| 21 | S&F for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube supply and fixing as specification and drawing. |
| 22 | S&F of factory Made Solid panel PVC door shutter, 28 to 30mm thick (stiles) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded and wood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900 ) used instead of exposed portion of PVC sheet beading plain colour PVC sheets for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying and fixing in the frame at site as per specification & drawing. |
| 23 | Supply and fixing Butt hinges (ISI Marked), aluminium alloy with galvanised mild steel of size 100mm long all as specified & directed. |
| 24 | S&F extruded aluminum alloy handles of size 150mm fabricated type anodised complete. |
| 25 | S&F Aluminium alloy anodised barrel tower bolts of extruded section 150 mm long and fixed complete. |
| 26 | S&F Aluminium alloy, anodised, sliding door bolt size 200mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed. |
| 27 | S&F Anodised aluminium frame for doors, windows and ventilator with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 28 | Anodised aluminium window and ventilator shutters, fixed type without sash bars, aluminium sections weighing of 0.55 kg/RM including fixed with aluminum beading, silicon lining and gaskets, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and directed |
| 29 | S&F for 4.8 mm thick sheet glass ordinary quality and glazing with oil putty / wooden beads/ MS square tube in square panes not exc 0.50 sqm each fixed with steel frame work complete all as specified and directed. |
| 30 | M&L for 4.0mm thick sheet glass, figured tinted and glazing with oil putty in square n exc 0.5 Sqm in each pane including Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips complete all as specified and directed. |
| 31 | Dismantling of structure steel work including doors, gates but excluding framed truss etc,complete all as specified and directed by engineer in charge. |
| 32 | Framed work as in false ceiling, doors or gates of angle or other section with gusset plates, rails, braces, etc. complete drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-410 grade, all as specified and directed. |
| 33 | S&F Roof trusses (framed), trussed, posts, struts, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, base plate and gusset plates etc confirming to Fe 410 -W (Gde-E- 250) quality-A complete all as specified and directed. |
| 34 | Dismantling wall and ceiling boards (fibre pulp, insulation, etc) or insulation board/ slabs/ blankets any thickness including grid work/ aluminium frame work, cover fillets complete all as specified. |
| 35 | Providing and fixing false ceiling with semi perforated 12mm thick micro GRG false ceiling tiles at all heights with GRG (Glass fibre reinforced gypsum) false ceiling tiles of size 595 x 595mm of approved texture, design and patterns having moisture content less then 2% humidity resistance of 99%, NRCO. 52 to 0.75 as per is 8225: 987, non combustible as per BS 476 (part 4) -970 and light reflectance of 85% (Minimum) to be laid in true horizontal level suspended on interlocking metals T-Grid of hot dipped galvanised iron section of 0.33mm thick (Galvanised @ 120 gms per Sqm including both sides) comprising of main-T runners of size 15 x 32mm of length 3000mm, cross -T of size 15 x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32mm of length 600mm to from grid module of size 600 x 600mm, suspended from ceiling using galvanised mild steel items (Galvanizing 80 gms per sqm) i.e. 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L- Shape level adjuster of size 85 x 25 x2mm. Galvanised iron perimeter wall angle of size 24x24x0.40 of length 3000mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450mm centre to centre and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per direction of the Engr-in-Charge. |
| 36 | S&F 6mm thick Plywood, grade BWR, type BB, fixed with screws to timber/steel frame work fixed in ceiling complete all as specified and directed. |
| 37 | M&L for preparing of new or previous untreated steel surfaces over 10cm width or girth and making good including primer and make the surface smooth by rubbing with sand papers etc and applying two coat of synthetic enamel paint, complete all as specified and directed. |
| 38 | Demolition of brick or stone boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone works and precast concrete articles, complete all as specified and directed |
| 39 | M&L Brick work with sub class B bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6, complete all as specified and directed. |
| 40 | M&L Brick work with old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 (1 cement : 4 coarse sand), complete all as specified. |
| 41 | Taking down Cement Plaster, any description on Brick Walls or on Concrete Surfaces including raking out Joints, hacking for Key, scrubbing down with Water, etc, and removing same from the Site(s), complete all as specified and as directed. |
| 42 | M&L for rendering 10 mm thick on fair faces of concrete/ brick interior surfaces in cement mortar 1:6 as per manufacturer's instruction, finished fair and even without using extra cement, complete all as specified and directed. |
| 43 | M & L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 on wall surfaces, finishing the surface even and smooth without using extra cement, complete all as specified. Note:- Integral water proofing compound shall be measured and paid for separately. |
| 44 | M&L for rendering 5 mm thick in cement mortar 1:3 on concrete surfaces on ceiling finished even and smooth without using extra cement complete specified. |
| 45 | Supply only integral water proofing compound all as directed. |
| 46 | M&L preparation of newly plastered wall surface and applying of Birla/JK white wall putty approx 3 mm thick in two layer as per manufacturer's instruction on existing prepared surface and make the surface smooth by rubbing with sand papers and applying two coats of oil emulsion distemper over a coat of primer, complete all as specified and directed. |
| 47 | M&L for preparation of newly plastered ceiling surface and applying of Birla/JK white wall putty approx 3 mm thick in two layer as per manufacturer's instruction on new surface and make the surface smooth by rubbing with sand papers and applying two coats of oil emulsion distemper over a coat of primer, complete all as specified and directed. |
| 48 | Preparing new plastered or un-plastered surfaces of walls and applying two coats Acrylic exterior emulsion paint in camouflaging (Disruptive) pattern (Green, Grey & Brown colour) over a coat of acrylic primer complete, all as specified and directed. |
| 49 | S&F in repair PVC flushing cistern 10 ltr capacity white with all internal fittings including brackets PVC connection 45cm long including nut and PVC washer at both ends including 32mm bore PVC long bend flush pipe 90cm long, complete all as specified and directed. |
| 50 | S&F in repair Vitreous China wash down water closet (pedestal pattern), white/coloured including traps, connection to drain or outgoing pipe, flushing pipe, anti-syphonage pipe complete including fittings, PVC coloured seat cover and chromium plated jet including PVC connection, fixed complete including demolition of old unserviceable WC and provision of plain cement concrete M-15, type B-I, using 20mm graded crushed stone aggregate, fixed in repairs, complete all as specified and directed. |
| 51 | S&F in repair Vitreous Chinaware squatting pan, ‘Orissa pattern’ size 580 mm x 440 mm, crystal white, with cast iron ‘P’ or ‘S’ trap, front or back inlet, integral foot rest with provision of plain cement concrete M-15, type B-I using 20 mm graded crushed stone aggregate complete all as specified, including making connections to trap and to flush pipe, etc and making good to floors to match existing, in repair, complete all as specified and directed. |
| 52 | S & F Vitreous china wash hand basin coloured, flat back type of size 550mm x 400mm including waste pipe & plug, porcelain stopper, 32mm dia PVC waste pipe with CP brass coupling and set of bracket, complete all as specified and directed. |
| 53 | S&F in repair Vitreous China urinals of minimum size 580x380x350 mm, crystal white, Half Stall Urinal with 32 mm bore waste fittings, brass, chromium plated with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including spreader, 60mm long brass screws, pointing around urinal back in cement with brackets, flush pipe, trap, grating and union for discharge pipe. (Including fixing supply pipe to flushing cistern, trap and waste pipe), complete all as specified and directed. |
| 54 | S & F in repairs stainless steel wall mount case with Soap Dish & bruch holder fixed to wall all as specified and directed by Engr-in-Charge . |
| 55 | S&F CP health faucet of 1.25Mtr long CP flexible tube with necessary fittings, complete all as specified and directed. |
| 56 | Taking up or down 15 mm dia steel tubing in wall, ceiling or floor and connections including cleaning for refixing or removal to store etc complete. |
| 57 | Taking up or down 20 mm dia steel tubing in wall, ceiling or floor and connections including cleaning for refixing or removal to store etc complete. |
| 58 | S&F 15 mm dia medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors. |
| 59 | S&F 20 mm dia medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors. |
| 60 | M & L for Lagging to 20 mm dia pipes used in internal water supply or plumbing all round with, 40 min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum all as specified and directed. |
| 61 | Cutting chases, pinning for concealed water tubing and making good to facing where required and pointing in cement mortar 1:3 ,cutting exc 10cm but n.exc 20cm girth all as specified and as directed. |
| 62 | S&F in repair 20mm bore gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 63 | S&F in repair brass chromium plated tubular towel rails 20mm dia D type 60cm long between flanges with chromium plated bracket and fixed all as directed. |
| 64 | S&F 500 litre capacity rotational moulded polyethylene water storage tank (cylindrical vertical double layered with closed top) duly provided with necessary fittings/ fixtures for connecting inlet, outlet, washout and overflow pipes; hoisted and fixed in position including dismantling PVC water storage tanks of capacity more than 250 to 500 litres capacity, complete all as specified and directed. |
| 65 | S&F 1000 litre capacity rotational moulded polyethylene water storage tank (cylindrical vertical double layered with closed top) duly provided with necessary fittings/ fixtures for connecting inlet, outlet, washout and overflow pipes; hoisted and fixed in position including dismantling PVC water storage tanks of capacity 500 litres capacity, complete all as specified and directed. |
| 66 | S&F in repair Ball valves 20 mm high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0mm-210gms./ 25mm-455gms/ 40mm - 690 gms) |
| 67 | S&F 1600mmx600mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 68 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 69 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed. |
| 70 | S & F in repairs Corner Glass Shelf of size 320 x 320 mm with Silver chromium finished border Oval Range premium quality all as specified and directed by Engr-in-Charge . |
| 71 | S&F in repair 15mm dia 450mm long PVC connection with brass nut and washer, complete all as specified and directed. |
| 72 | S&F in repair 15 mm bore CP Bib tap cast copper alloy fancy type crutch or butterfly handles screwed down for iron or for brass ferrule complete. |
| 73 | S&F in repair stop valve/angle valve, fancy type, chromium plated, cast copper alloy screwed down, high pressure with crutch or butterfly handle of 15mm dia. Screwed both ends for iron pipe or for unions and fixed, all as specified & directed. |
| 74 | S & F in repairs two way angle valve 15 mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions. |
| 75 | S&F in repair chromium plated brass wall mixer 3-in-1 fancy type with provision for both hand shower and overhead shower complete with wall flange (without hand & over head shower screwed down for15 mm GI bore pipe, complete all as specified and directed. |
| 76 | S&F in repair Brass CP central hole wash basin mixer for hot & cold for 15mm dia complete fixed to connection as specified and directed. |
| 77 | S&F 15 mm bore CP Pillar tap cast copper alloy with capston heads screwed down for high press with or without lettered hot or cold with long screwed shank and fly nuts screwed for iron pipe complete as specified |
| 78 | Supply and fixing in repair Shower Rose brass chromium plated 125mm size with arm suitable for 15mm dia pipe, all as specified and as directed. |
| 79 | Dismantling of PVC drain pipes, jointed in cement mortar and taking out of ranches, if required complete all as specified and directed. |
| 80 | S&F PVC (SWR) pipes single socketed,110mm bore, in any length with rubber ring joints fixed to wall and floor, complete all as specified and directed. |
| 81 | S&F PVC (SWR) pipes single socketed,75mm bore, in any length with rubber ring joints fixed to wall and floor, complete all as specified and directed. |
| 82 | PVC (SWR) 75mm bore (dia), Bends, any radius with access door and Jointing with Solvent Cement and fixed-in-repairs, complete all as specified and as directed. |
| 83 | PVC (SWR) 110mm bore (dia), Bends, any radius with access door and Jointing with Solvent Cement and fixed-in-repairs, complete all as specified and as directed. |
| 84 | PVC (SWR) 75mm Bore (dia), Branch Piece, Single (Single Y) Equal or Unequal with access door and Jointing with Solvent Cement and fixed-in-repairs, complete all as specified and as directed. |
| 85 | PVC (SWR) 110mm Bore (dia), Branch Piece, Single (Single Y) Equal or Unequal with access door and Jointing with Solvent Cement and fixed-in-repairs, complete all as specified and as directed. |
| 86 | PVC (SWR) 75mm Bore (dia), junction Single (Single T) Equal or Unequal with access door and Jointing with Solvent Cement and fixed-in-repairs, complete all as specified and as specified and directed. |
| 87 | PVC (SWR) 110mm Bore (dia), junction Single (Single T) Equal or Unequal with access door and Jointing with Solvent Cement and fixed-in-repairs, complete all as specified and as specified and directed. |
| 88 | S & F PVC (SWR) vent cowl, size of bore 75mm |
| 89 | S&F in repairs CP grating round suitable for 110 mm dia and connecting up, fixed in repairs. |
| 90 | M&L PVC (SWR) floor trap 110 mm dia including jointing with solvent cement complete. |
| 91 | M&L PVC (SWR) Gully trap 125/110 mm setting and jointing with solvent cement complete. |
| 92 | Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre deep and getting out in soft/loose soil, complete all as specified and as directed. |
| 93 | M&L for Concrete bed to 200mm dia drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in Plain cement concrete 1:3:6, type C-2 using 40mm graded crushed stone aggregate, complete all as specified and as directed. |
| 94 | Supply and fixing for double wall corrugated HDPE non pressure pipe suitable for sewage/ waste etc of size DN/ID 200mm, dim 195mm and wall thick e4 min-1.5mm and e5 min-1.00mm all as per IS16098 (part-2), including jointing rings and necessary machinery to joint the sewers in-situ in trenches, including preparation of internal surface complete all as specified and directed .Note:- Excavation and earth work including return filling shall be measured and paid separately. |
| 95 | Returning, filling in, including spreading leveling, watering and well ramming in layers not exceeding 25cm thick, complete all as specified and as directed. |
| 96 | Removing of excavated material (soil) to a distance not exceeding 50 metres and depositing where directed at a level not exceeding 1.5metre high from the starting point, complete all as specified and as directed. |
| 97 | Cutting into existing manholes for connecting new pipes 200mm dia, making good to pipes and rendering, cutting out existing benching for and forming channel (1/2 round or 3/4 section) in plain cement concrete 1:2:4, type B-1 using 20mm graded crushed stone aggregate, finishing surfaces and reforming benching as required, complete all as specified and directed. |
| 98 | E/M PORTION |
| 99 | Taking down carefully aluminium/copper point wiring (light, bell, fan, socket) complete including fixture and fittings such as switches, ceiling roses, regulators, sockets, holder, fittings and terminal box sheets complete, stacking material at site and making good the disturbed surface of walls/ floors to match with existing surface complete all as specified. |
| 100 | M&L for point wiring with two single core PVC insulated, unsheathed, FRLS type, 1100 volts grade, multistranded copper conductor cable 1.5 sqmm in and including PVC casing caping ISI marked with all connected accessories including one single core multistanded PVC insulated, unsheathed, FRLS type, 1100 volts grade,1.5 sqmm copper conductor cable unsheathed as earth continuity cable including concealed pressed steel GI terminal boxes of suitable way with 3 mm thick laminated sheet cover for mounting of switches, socket, fan regulators, connected to common earth dolly complete all as specified for the following:- (a) One light /fan/ point controlled by one nos, one way 5/6 Amps switch. |
| 101 | (b) All as per srl item No 99.00 here-in-before but using One 3/5 pin socket outlet, 5/6 Amp on the same board controlled by one nos, one way switch. |
| 102 | (c) All as per srl item No 99.00 here-in-before but using One 3/5 pin socket outlet, 5/6 Amp, independent controlled by one nos, one way switch. |
| 103 | All as per srl item No 99.00 here-in-before but using cable of size 2.5 sqmm (for phase & neutral) and 2.5 sqmm as continuous earth cable for 15/16 Amps socket outlet, independent controlled by one nos, one way switch, complete all as specified. (Note- 01 Geyser point in one Circuit and 02 Power point in one circuit). |
| 104 | S&F in replacement of piano type switch one way, SP, flush type, 5/6 Amps, 230 volts AC, 50 Hz complete all as specified. |
| 105 | S&F in replacement of piano type socket outlet flush type, 3 pin 2-in-1, 5/6 Amps, 230 volts AC, 50 Hz, multipurpose type complete all as specified. |
| 106 | S&F in replacement of piano type switch socket combination flush type, 2-in-1 3 pin, 6/16 Amps, 230 volts AC, 50 Hz, multipurpose type complete all as specified. |
| 107 | S&F in replacement of ceiling rose 3 terminals, PVC/polycarbonate/bakelite, isolated body 230 volts AC, 50 Hz complete all as specified. |
| 108 | S&F in replacement of wiring for submain with PVC insulated unsheathed copper conductor cable, multi stranded, single core, FRLS type, 1100 volts grade 2 x 6 sqmm complete drawn in existing conduit along with 1x 6.0 sqmm PVC insulated unsheathed copper conductor cable, multi stranded for continuous earth wire including making good the disturbed surface complete all as specified. |
| 109 | S&F in replacement of sheet metal enclosure DB TPN 4 way, double door, 415 volts AC, surface mounting complete with suitable busbar, neutral link & earth link suitable for MCB TP/TPN as incomer & MCB SPN as outgoing complete all as specified. |
| 110 | S&F in replacement of MCBs, TPN, 40-100 Amps, 415 volts, 10 kA rupturing capacity, C curve type, complete all as specified and directed. |
| 111 | S&F in replacement of sheet metal enclosure DB SPN 8 way, double door, 240 volts AC, surface mounting complete with suitable busbar, neutral link & earth link suitable for MCB DP/SPN as incomer & MCB SP as outgoing complete all as specified. |
| 112 | S&F in replacement of MCBs, SPN, 32 Amps, 230 volts, 10 kA rupturing capacity, C curve type complete all as specified. |
| 113 | S&F in replacement of sheet metal steel plug & socket DB SP with metal clad 2 pin & earth plug and socket SP 20 Amps, 230 volts AC, surface mounting type complete with one MCB SP, 20 Amps, 10 kA, complete all as specified. |
| 114 | S&F in replacement of MCBs, SP, 6-32 Amps, 230 volts,10 kA rupturing capacity, C curve type, complete all as specified. |
| 115 | S&F in replacement of MCBs, SPN, 40-63 Amps, 230 volts, 10 kA rupturing capacity, C curve type, complete all as specified. |
| 116 | S&F in replacement LED tube light fitting 1x20/ 22 watts, 220 volts AC, 4 ft complete with separate tube rod ,fixed on PVC square block/wall, prewired including twin core cable for connection up to ceiling rose, complete all as specified. |
| 117 | S&F in replacement LED tube light fitting 10 watts, 220 volts AC, 2 ft complete with separate tube rod ,fixed on PVC square block/wall, prewired including twin core cable for connection up to ceiling rose, complete all as specified. |
| 118 | M&L for taking down existing Exhaust fan and submitted to E/M subdivision with all the connected accessories, all as per direction of Engr-in-Charge. |
| 119 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc. complete all as specified and as directed. |
| 120 | M&L for taking down existing Geyser of any capacity and submitted to E/M subdivision with all the connected accessories, all as per direction of Engr-in-Charge. |
| 121 | Supply and fixing of exhaust fan made of sturdy engineering plastic complete with louvers shutter, 230 V, 50 Hz, 1200 RPM , Copper winding of sweep 300 mm.Complete all as specified and as directed. Note- Work includes making hole in wall and making good disturbed surface using cement mortar. |
| 122 | S&F in replacement LED Street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection, complete all as specified and directed |
| 123 | M&L for plate earthing complete with galvanized mild steel plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (in earth pit not less than 2.25 meter deep below ground level) with the top edge of earth plate at a depth not less than 1.5 meter below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and including GI wire 4 mm bolted (with GI nuts, bolts & check nuts) and riveted to earth (Plate) electrode at one end and connected to main switch board /panel/ test point at the other including watering GI pipe (medium grade) 20 mm bore from bottom of earth pit to top of electrode and 20 mm GI pipe light grade for earth strip protection complete with earth pit in PCC 1:2:4 type B0 using 12 mm graded crushed stone aggregate, RCC cover, funnel, wire mesh including necessary excavation and earth work in any type of soil, returning filling in and removal of surplus soil, complete all as specified. |
| 124 | S&F gun metal globe valve with iron handle screwed both ends for iron pipe and fixed of size 20 mm bore. |
| 125 | Supply and laying of galvanised steel water tubing medium grade trenches / wall /floor with all fittings , connections as required at site of size 20 mm bore. |
| 126 | Cutting the any type of Size MM dia DI pipes and reducing the required length/ insertion of tee for new GI 20 MM Dia pipe connections all as directed. |
| 127 | Supply, laying and testing cable XPLE insulated, screened,PVC bedded, galvenised steel strip or wire armoured, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 Sqmm,4 core. |
| 128 | Supply and laying of DWC HDPE (Double wall corrugated high density polyethylene) pipes of standard length of minimum 35 mm inner diameter for 4/3.5 core 16/35 Sqmm XLPE aluminium cable confirming to IS 14930 part II (amended up to date ), including all local & central taxes, transportation and freight charge inspection charge ,loading and unloading charges ,conveyance to the site of work. stacking the same in closed shade duly protecting from sunrays, rain & theft or physical damage etc quantity as per actual. |
| 129 | Note:- An amount of Rs. 48,423.00 on account of credit schedule for Sch 'A' Part-II Shall be deducted from the total amount of BOQ to arrive at the contract sum. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayJul 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender