Tender For Maintenance Of Existing S.F Office Building, F.O Office Building And Inputs Storage Building At Chakmaghat Under Supdt. Of Fisheries, Teliamura Sub-Division
Tender Value
11.48 Lakhs
Estimated cost
Bid Submission
02 Jul 2026
0 days left
EMD
22976
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khowai → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance Of Existing S.F Office Building, F.O Office Building And Inputs Storage Building At Chakmaghat Under Supdt. Of Fisheries, Teliamura Sub-Division
BOQ
| Sl. No. | Item Description |
| 1 | Item Description |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. -All kinds of soil |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - -All work upto plinth level: 1:2:4 ( 1 Cement: 2 fine sand : 4 graded stone aggregate20 mm nominal size) |
| 4 | Reinforced cement concrete work in beams, suspendedfloors, roofs having slope upto 15° landings, balconies,shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases upto floor five levelexcluding the cost of centring, shuttering, finishing and reinforcement- 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stoneaggregate 20 mm nominal size) |
| 5 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D ormore |
| 6 | First class brick work in foundation and plinth including cost of all materials as required complete:- In cement mortar 1:3 ( 1 cement : 3 fine sand ) |
| 7 | 6.12 Half brickmasonryworkwith first class bricks insuperstructureuptofloor five level includingcostofall materials as required complete:- |
| 8 | Providingwoodwork in framesof doors,windows,clerestorywindowsandotherframes,wroughtframedand fixed in position : Local Teak Wood |
| 9 | Providing wood work in frames of false ceiling,partitions etc. sawn and put up in position : Local Teak Wood |
| 10 | Providingandfixingpanelled/orpanelledandglazed shutters fordoors,windowsandclerestorywindows including ISI marked bright finished / black enamelled M.S butt hinges with necessary screws excluding panelling and orglazing, which will be paid forseparatelybutincludingthewoodenbeadingof20 ×12mmfor fixingpanellingandor glazingasper direction of Engineer-In-Charge. Local Teak wood 30 mm thick shutters |
| 11 | Providing and fixing factory made door frame (singlerebate) made of solid PVC foam profile withhomogenous fine cellular structure having smoothouter integral skin having 60mm width & 30mmthickness and shall be fixed to wall as per instructionsof Engineer-In-Charge using 100x8 sheet metal CSKscrews. |
| 12 | Providing and fixing 28 mm thick door shutter madeof solid PVC foam profile with homogenous finecellular structure having smooth outer integral skinhaving 71mm width & 28mm thick as vertical &horizontal styles. Joints are made using solventadhesive and GI ‘C sections (39mm x 19mm x 0.6mmthick) or M S pipe (40mm x 20mm ) stiffener frameinsert & telescopic polymeric ‘L’ corners .The panelshall be filled with 3mm thick high- pressure compactlaminate as per manufacturer’s specifications anddirections of the Engineer-in-charge, cover mouldingshall be provided for covering fixing screws andelegant look.( for W.C. bathroom door shutter). |
| 13 | Cement concrete flooring 1:2:4 (1 cement : 2 fine sand : 4graded stone aggregate) finished with a floating coat ofneat cement, including cement slurry, but excluding thecost of nosing of steps etc. all completeetc as perdirection of Engineer-in-charge. 40 mm thick with 20 mm nominal size stone aggregate |
| 14 | Providing and laying 1st class quality vitrified floor tilesin different sizes (thickness to be specified by themanufacturer) with water absorption less than 0.08% andconforming to IS: 15622- 2017, of approved make, in allcolours and shades, laid over 20mm thick cement mortar1:4 (1 cement : 4 fine sand), jointing with grey cementslurry @ 3.3 kg/ sqm including grouting the joints withwhite cement and matching pigments etc. all complete asper direction of the Engineer-in-charge.. Soluble Salt Stainfree vitrified tiles (Glossy) Size of tile 600 mm x 600 mm |
| 15 | Providing corrugated G.S. sheet roofing includingvertical/curved surface fixed with polymer coated Jor L hooks, bolts and nuts 8 mm diameter withbitumen and G.I. limpet washers or with G.I. limpetwashers filled with white lead and including a coatof approved steel primer and two coats of approvedpaint on overlapping of sheets complete (up to anypitch in horizontal/ vertical or curved surfaces)excluding the cost of purlins, rafters and trusses andincluding cutting to size and shape wherever requiredetc. complete as per direction of Engineer-in-charge. 0.63mm thick with zinc coating not less than 275gm/m2 |
| 16 | Providing ridges or hips of width 60 cm overall widthplain G.S. sheet fixed with polymer coated J or L hooks,bolts and nuts 8 mm dia G.I. limpet and bitumenwashers etc. complete as per direction of Engineer-incharge. 0.63mm thick with zinc coating not less than 275gm/m2 |
| 17 | Providing and fixing insulating board ceiling ofapproved quality with necessary nails etc. complete asper direction of Engineer-in-charge. (frame work to bepaid separately): 12 mm thick natural colour insulating board |
| 18 | Repairs to plaster of thickness 12 mm to 20 mm inpatches of area 2.5 sqm and under including cutting thepatch in proper shape and preparing and plastering thesurface of the walls complete including disposal ofrubbish to the dumping ground with all leads and liftsincluding finishing even and smooth and curingcomplete as per direction of the Engineer in charge: With cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 19 | Removing white or colour wash by scrapping and sandpapering and preparing the surface smooth includingnecessary repairs to scratches etc. complete. |
| 20 | Distempering with dry distemper of approved brandand manufacture and of required shade on old work (one or more coats ), to give an even shade as requiredcomplete as per direction of the Engineer in charge. |
| 21 | Finishing walls with textured exterior paint of requiredshade of approved brand and manufacture on old work( one or more coats ) including preparation of surface asrequired complete as per direction of the Engineer incharge. |
| 22 | Painting on wood work with oil type wood preservative(one or more coats ) of approved brand andmanufacture on old work including preparation ofsurface as required complete as per direction of theEngineer in charge. |
| 23 | Providing and fixing white vitreous china pedestaltype water closet (European type W.C. pan) with seatand lid, 10 litre low level white P.V.C. flushingcistern with manually controlled device (handle lever),conforming to IS : 7231, with all fittings and fixturescomplete including cutting and making good the wallsand floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid |
| 24 | Providing and fixing white vitreous china pedestaltype water closet (European type) with seat and lid, 10litre low level white vitreous china flushing cistern &C.P. flush bend with fittings & C.I.brackets, 40mmflush bend, overflow arrangement with specials ofstandard make and mosquito proof coupling ofapproved municipal design complete includingpainting of fittings and brackets, cutting and makinggood the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid. |
| 25 | Providing and Fixing white vitreous china flat backor wall corner type lipped front urinal basin of430x260x350mm and 340x410x265mmrespectively with automatic flushing cistern withstandard flush pipe and C.P. brass spreaders withbrass unions and G.I clamps complete, includingpainting of fittings and brackets, cutting and makinggood the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automaticflushing cistern. |
| 26 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps,32 mm C.P. brass waste ofstandard pattern, including painting of fittings andbrackets, cutting and making good the wallswherever require : White Vitreous China Wash basin size 630x450 mm with apair of 15 mm C.P. brass pillar taps |
| 27 | Providing and fixing mirror of superior glass (ofapproved quality) and of required shape and size withplastic moulded frame of approved make and shade with6 mm thick hard board backing : Circular shape 450 mm dia |
| 28 | Providing and fixing toilet paper holder : C.P. brass |
| 29 | Providing and fixing Chlorinated PolyvinylChloride (CPVC) pipes, havingthermal stabilityforhot&coldwatersupplyincludingallCPVCplain&brassthreadedfittingsincludingfixingthepipewithclampsat 1.00mspacing. This includes jointingofpipes&fittingswithonestepCPVC solvent cementand testingof joints complete asper directionofEngineer in Charge.Internal work - Exposed on wall 25 mm nominal outer dia .Pipes. |
| 30 | Providing and fixing PTMT towel ring trapezoidal shape215mm long, 200mm wide with a minimum distances of37mm from wall face with concealed fittingsarrangement of approved quality and colours weighingnot less than 80 gms. |
| 31 | Providing and fixing PTMT liquid soap container 109mmwide, 125mm high and 112mm distance from wall ofstandard shape with bracket of the same materials withsnap fittings of approved quality and colours weighingnot less than 105 gms. |
| 32 | Providing and placing on terrace (at all floor levels)polyethylene water storage tank ISI : 12701 markedwith cover and suitable locking arrangement andmaking necessary holes for inlet, outlet and overflowpipes but without fittings and the base support fortank. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayJul 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Today