Tender For Maintenance Of F.A. Circle Office Building At Gabardhi Under Supdt. Of Fisheries, J Uijala Sub-Division
Tender Value
3.97 Lakhs
Estimated cost
Bid Submission
02 Jul 2026
0 days left
EMD
7942
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sepahijala → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance Of F.A. Circle Office Building At Gabardhi Under Supdt. Of Fisheries, J Uijala Sub-Division
BOQ
| Sl. No. | Item Description |
| 1 | Item Description |
| 2 | Providing and fixing flat pressed 3 layer mediumdensity particle board or graded particle board (Grade I)IS: 3087 marked in ceiling with necessary nails etc.complete as per direction of Engineer-in-charge. (framework to be paid separately): 12 mm thick |
| 3 | Providing wood work in frames of false ceiling,partitions etc. sawn and put up in position : Other Wood ( Jam, Garjan, Chamal) |
| 4 | Providing and laying 1st class quality vitrified floor tilesin different sizes (thickness to be specified by themanufacturer) with water absorption less than 0.08% andconforming to IS: 15622- 2017, of approved make, in allcolours and shades, laid over 20mm thick cement mortar1:4 (1 cement : 4 fine sand), jointing with grey cementslurry @ 3.3 kg/ sqm including grouting the joints withwhite cement and matching pigments etc. all complete asper direction of the Engineer-in-charge.. Soluble Salt Stainfree vitrified tiles (Glossy) Size of tile 600 mm x 600 mm |
| 5 | Providing corrugated G.S. sheet roofing includingvertical/curved surface fixed with polymer coated Jor L hooks, bolts and nuts 8 mm diameter withbitumen and G.I. limpet washers or with G.I. limpetwashers filled with white lead and including a coatof approved steel primer and two coats of approvedpaint on overlapping of sheets complete (up to anypitch in horizontal/ vertical or curved surfaces)excluding the cost of purlins, rafters and trusses andincluding cutting to size and shape wherever requiredetc. complete as per direction of Engineer-in-charge. 0.50mm thick with zinc coating not less than 275gm/m2 |
| 6 | Providing ridges or hips of width 60 cm overall widthplain G.S. sheet fixed with polymer coated J or L hooks,bolts and nuts 8 mm dia G.I. limpet and bitumenwashers etc. complete as per direction of Engineer-incharge. 0.25mm thick with zinc coating not less than 275gm/m2 |
| 7 | Providing and fixing factory made UPVC door framemade of UPVC extruded, section having an overalldimension, as below (tolerance +/- 1mm) with wallthickness 2.0mm+/- 02mm. corners of the door frameto be jointed with galvanized brackets and stainlessscrews, joint mitred and plastic wilded. The hinge sidevertical of the frames reinforced by galvanized MStube of size 19 × 19 mm and 1 mm +/- 0.1 mm wallthickness and 3 nos stainless steel hinges fixed to theframe complete as per manufacturers specificationand direction of Engineer-in-Charge. Extruded section Profile size 42x50 mm. |
| 8 | Providing and fixing to existing door frames. 24 mm thick factory made PVC door shutters made ofstyles and rails of a UPVC hollow section of size 59x24mm and wall thickness 2 mm ± 0.2 mm with inbuiltedging on both sides. The styles and rails mitred andjoined at the corners by means of M.S. galvanised/plastic brackets of size 75×220 mm having wallthickness 1.0 mm and stainless steel screws. The stylesof the shutter reinforced by inserying galvanised MStube of size 20×20 mm and 1 mm ± 0.1 mm wallthickness. The lock rail made up of \\"H\\" Section, a UPVChollow section of size 100×24 mm and 2 mm ± 0.2 mmwall thickness fixed to the shutter styles by means ofplastic /galvanised MS \\"U\\" cleats. The shutter framefilled with a UPVC multi-chambered single panel of sizenot less than 620 mm, having overall thickness of 20mm and 1 mm ± 0.1 mm wall thickness. The panelsfilled vertically and tie bar at two places by insertinghorizontaly 6 mm galvanised MS rod and fastened withnuts and washers, complete as per manufacturer'sspecification and direction of Engineer-In-Charge. (forW.C. and Bathroom door shutter). |
| 9 | Providing40×5mmflat ironholdfast40cmlongincludingfixingtoframewith10mmdiameterbolts,nuts andwooden plugs and embedding in cementconcreteblock30×10×15cm1:3:6mix(1cement:3finesand : 6gradedstoneaggregate20mmnominalsize) |
| 10 | Providingandfixingpanelled/orpanelledandglazedshutters fordoors,windowsandclerestorywindowsincluding ISI marked bright finished / blackenamelled M.S butt hinges with necessary screwsexcludingpanellingandorglazing,whichwillbepaidforseparatelybutincludingthewoodenbeadingof20×12mmfor fixingpanellingandor glazingasperdirection of Engineer-In-Charge. Gamair Wood 35 mm thick shutters |
| 11 | Repairs to plaster of thickness 12 mm to 20 mm inpatches of area 2.5 sqm and under including cutting thepatch in proper shape and preparing and plastering thesurface of the walls complete including disposal ofrubbish to the dumping ground with all leads and liftsincluding finishing even and smooth and curingcomplete as per direction of the Engineer in charge: With cement mortar 1:3 ( 1 cement : 3 fine sand ). |
| 12 | Distempering with 1st quality washable acrylicdistemper of approved brand and manufacture and ofrequired shade on old work ( one or more coats ), togive an even shade as required complete as perdirection of the Engineer in charge. |
| 13 | Finishing walls with acrylic smooth exterior paint ofrequired shade of approved brand and manufacture onold work ( one or more coats ) including preparation ofsurface as required complete as per direction of theEngineer in charge. |
| 14 | Painting on G.S. sheet with synthetic enamel paint ( oneor more coats ) of approved brand and manufacture ofrequired colour to give an even shade on old workincluding preparation of surface as required completeas per direction of the Engineer in charge: |
| 15 | Painting with synthetic enamel paint ( one or morecoats ) of required colour of approved brand andmanufacture on old work to give an even shadeincluding preparation of surface as required completeas per direction of the Engineer in charge. |
| 16 | Wiring for circuit /Sub-main with following sizes PVC insulated copper conductor cable (FR) in PVC casing and capping etc. as required. 2x1.5 sqmm |
| 17 | Wiring for circuit /Sub-main with following sizes PVC insulated copper conductor cable (FR) in PVC casing and capping etc. as required. 2x2.5 sqmm |
| 18 | Making plinth protection 50mm thick of cementconcrete 1:3:6 (1 cement : 3 fine sand : 6 graded wellburnt brick aggregate 20 mm nominal size) over75mm bed of dry brick ballast 40mm nominal sizewell rammed and consolidated and grouted with finesand including finishing the top smooth. |
| 19 | Providing and placing on terrace (at all floor levels)polyethylene water storage tank ISI : 12701 markedwith cover and suitable locking arrangement andmaking necessary holes for inlet, outlet and overflowpipes but without fittings and the base support fortank. |
| 20 | Earth work in excavation by mechanical means (Hydraulicexcavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.-All kinds of soil |
| 21 | Supplying and filling in plinth, under floor, foundations etc.with sand (fine) from local quarry with all lifts includingspreading in horizontal layers, watering, grading torequired slope, ramming, consolidating and compactingeach layer by using plate compactor or by any suitablemethod complete. |
| 22 | Providing and laying in position cement concrete ofspecified grade excluding the cost of centring andshuttering --All work upto plinth level: 1:2:4 ( 1 Cement: 2 fine sand : 4 graded well burnt brickaggregate 40 mm nominal size) |
| 23 | Halfbrickmasonryworkwithsecondclassbricks infoundationandplinth includingcost of allmaterialsrequired as required complete: In cement mortar 1:4 ( 1 cement : 4 fine sand ) |
| 24 | 12 mm cement plaster of mix Cement mortar 1:4 (1 cement : 4 fine sand) |
| 25 | 6 mm cement plaster of mix : Cement mortar 1:4 (1 cement : 4 fine sand) |
| 26 | Neat cement punning. |
| 27 | Steel tabular resting chair (with cushoined seat and back arm) Godrej 7B Standard Size |
| 28 | steel table full secretariat laminated sheet top three drawers with automobile locking device to the right side and a cupboard with one drawer to the left side stotage unit size H20''Xw25''(60''X30''X30'') |
| 29 | Steel Almirah (with four sheves) 20 Gauge 78''x36''x18'' |
| 30 | Clearing jungle including uprooting of rank vegetation,grass, brushwood, treesandsaplingsofgirthupto30cmmeasured at a height of 1mabove ground level andremoval of rubbishuptoadistanceof 50moutside theperiphery of the area cleared. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayJul 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Today