Tender For Construction Of (G+2) Storied 50 Bedded Critical Care Block At Barasat Government Medical College And Hospital, North 24 Parganas ---- Dismantling And Refixing Fitting-Fixtures Including Rectification & Modification Of Miscellaneous Ancill
Tender Value
Ref. Documents
Estimated cost
Bid Submission
06 Jul 2026
0 days left
EMD
9576
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
24 Paraganas North → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of (G+2) Storied 50 Bedded Critical Care Block At Barasat Government Medical College And Hospital, North 24 Parganas ---- Dismantling And Refixing Fitting-Fixtures Including Rectification & Modification Of Miscellaneous Ancillary Electrical Work In Respect Of Ongoing Chiller A.C. Ducting Job.
BOQ
| Sl. No. | Item Description |
| 1 | Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Make- Legrand/L&T/ Schneider) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. (Power Plug for Air-Curtain) |
| 2 | Supply & Fixing 240 V, 25 A, Modular type AC starter (Make- North West/Crabtree/ Legrand/L&T) with 25A Modular switch type DP MCB (C-Curve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. (for Cassette/FCU) |
| 3 | Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Make- North West/ Crabtree / Legrand /L&T), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc. (for Cassette/FCU) |
| 4 | Supplying & Fixing CRC sheet metal (16 SWG) JB-cum-Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. bakelite / Perspex coloured Perspex (wall matching colour) top cover 3 mm thick flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works. |
| 5 | 175 mm x 100 mm x 65 mm |
| 6 | 200 mm x 150 mm x 65 mm |
| 7 | 240 mm x 200 mm x 65 mm |
| 8 | 300 mm x 200 mm x 65 mm |
| 9 | Supply & Fixing bakelite / perspex top cover on existing Inspection board by Brass screws. |
| 10 | 200 mm x 150 mm x 65 mm |
| 11 | 240 mm x 200 mm x 65 mm |
| 12 | Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Make- RR Kabel/Polycab/Finolex/Havells) in 25mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required. |
| 13 | 4 x 84/0.3 (6 sqmm) + 2 x 56/0.3 (4 sqmm) ECC (for AC AHU power) |
| 14 | Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] of following sizes on wall, ceiling with saddles and other accessories as required and mending good damages to building works. |
| 15 | 20 mm size |
| 16 | 25 mm size |
| 17 | Cutting Channel of size (40 mm x 40 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 19 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles. |
| 18 | 19 mm dia 3 mm thick polythene pipe without earth continuity wire |
| 19 | Supplying and fixing polythene pipe complete with fittings as necy. under ceiling/beam, bound with 22 SWG GI binding wire incl. supplying and drawing 1x18 SWG GI Wire as fish wire inside the pipes and fittings and providing 50 mm dia disc of MS sheet (20 SWG) having colour paint at one face fastened at the load point end of the polythene pipe with fish wire (synchronizing with roof/beam casting work of building construction). |
| 20 | 19mm dia 3mm thick Polythene Pipe |
| 21 | Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Make- RR Kabel /Polycab /Finolex / Havells) of the following sizes in the prelaid polythene pipe/PVC rigid conduit as per GS. |
| 22 | 3 x 22/0.3 (1.5 sqmm) as ECC |
| 23 | 2 x (2.5 sqmm) + 1 x (1.5 sqmm) as ECC |
| 24 | 2 x (4 sqmm) + 1 x (2.5 sqmm) as ECC |
| 25 | 4 x (10 sqmm) + 2 x (6 sqmm) as ECC (for MRL Lift Controller power) |
| 26 | 4 x (16 sqmm) + 2 x (10 sqmm) (for UPS power) |
| 27 | Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. |
| 28 | a) 1.5 sq mm |
| 29 | b) 2.5 sq mm |
| 30 | c) 4 sq mm |
| 31 | d) 6 sq mm |
| 32 | e) 10 sq mm |
| 33 | f) 16 sq mm |
| 34 | Supply and fixing of Ceiling Rose with base on existing point. (Make- Precision) |
| 35 | Dismantling of the existing obstructed electrical installtaion incl. electrical wiring, JB cum switch boards, fittings-fixtures, cable tray & other materials by Co's own tools & tackels and shifting & relocate the same at suitable place & mending good the damages as per direction of EIC near about 5 days. |
| 36 | Supplying and fixing MCB SS enclosure (Make- Legrand/L&T/ABB/Schneider) with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment. |
| 37 | 4 Way (for MRL Lift Controller power) |
| 38 | Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connections as per GS. [Make- Legrand/L&T/Schneider/ABB] |
| 39 | 6-32 A FP (for MRL Lift Controller power) |
| 40 | Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring as per GS. |
| 41 | 4 core 16 Sq. mm. (for existing cable) |
| 42 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make) as per GS. |
| 43 | 4 core 16 Sq. mm. cable (for existing cable) |
| 44 | Supply & fixing of 230V, 50Hz, 24 hrs. Digital Time Switch (Make- L&T GIC, Crono 67DDTO) in 4 way SS enclosure (Make- Legrand/L&T/ABB) for controlling of exhaust fan as per direction of EIC. |
| 45 | Fixing only single/twin florescent/LED light fitting complete with all accessories Directly on wall/ceiling with HW block and suitable size MS fastener, Ceiling plate, nipples etc. as required. |
| 46 | Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. |
| 47 | Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. |
| 48 | Fixing only 2ftx2ft recessed mounted LED light fitting on false ceiling complete with all accessories incl. making necessary disconnection and connection as required. |
| 49 | Supplying & Fixing of Box type fan clamp of 150mm dia & 80mm depth made of 16 SWG CRCA sheet with one end duly sealed by cover, properly welde, incl. S&F 12mm dia 600mm long MS rod duly bent by heat treatment at the centre position of rod to grip fan bobbin properly, incl. binding the rod and fan box with reinforcement by 22 SWG steel binding wire, incl. supplying & covering the box with alkathene sheet, placed in order to prevent concrete from entering the box. |
| 50 | Lowering and refixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. making necessary disconnection and connection as required. |
| 51 | Supply & fixing of MS down rod of 14 SWG 20mm dia for ceiling fan from fan clamp to body with necessary arrangement of nuts, bolts, washers etc. incl. drilling hole on downrod & painting the same as required. |
| 52 | Extra for supplying additional wire for down rod & painting the rod exceeding 30 cm by 2x1.5 sqmm flexible copper wire. |
| 53 | Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter : |
| 54 | 30 cm (12\\") |
| 55 | Supply & Fixing louver shutter on wall with necy. Bolts & nuts (6mm dia x 62 mm long) For GI |
| 56 | 30 cm Exhaust fan (12\\") |
| 57 | Supply & DELIVERY OF 230 v, 50 Hz, single phase, 48 watts, 12\\" (300 mm) Sweep, speed 900 rpm (Minimum), A C Exhaust Fan and class of insulation B, 4 nos metal (Aluminium alloy) blades, copper winding, steel/Al body Power Factor not less than 0.9 and minimum air delivery 1145 cmh (minimum) capacitor with safety pin, nut bolts, washers, temperature nse=75 degree C (max), insulation resistance more than 2 mega ohm, suitable for compliant to IS 374:2019 and external connections with 1.5 sq.mm FR, PVC insulated copper conductor single core cable and earthing etc. as required. |
| 58 | Fixing only exhaust fan with all accessories and making necessary alteration of existing hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire incl. making necessary disconnection and connection for exhaust fan as required. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayJul 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender