Tender For Construction Of Yoga And Meditation Centre For Senior Citizen Near Mission Shakti Gruha At Ward No-06 Nimapara Nac For 2026-27.
Tender Value
64.62 Lakhs
Estimated cost
Bid Submission
02 Jul 2026
0 days left
EMD
64620
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Puri → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Yoga And Meditation Centre For Senior Citizen Near Mission Shakti Gruha At Ward No-06 Nimapara Nac For 2026-27.
BOQ
| Sl. No. | Item Description |
| 1 | A) CIVIL WORKS: Earth work in excavation in all kinds of soil by mechanical means (Hydraullic excavator)/manual means overareas (exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan) inculding disposal of excavated earth up to 50 m and lift upto 1.5m with all lead andlift including shoring, shuttering & dewatering (if required) with cost of all Labour, Labourcess ,Hire & Running charges of the water pumps, T & P required for the work complete asdirected by the Engineer- in- charge. |
| 2 | Filling in foundation trenches and plinths with filling sand, well watered, compacted, dressed and leveled to proper gradient etc., complete as per the direction of the Engineer-in-charge. A) TOILET, B) Upto Plinth |
| 3 | Filling foundation trenches and plinths with excavated materials in layers not exceeding 0.3 mtr in depth including watering and ramming and dressing and levelling etc. complete as per the direction of the Engineer-in-charge. |
| 4 | Carraige of surplus earth by mechanical means (within 5 km). Taking 95 % of above excavted earth |
| 5 | Supplying , diluting and and preparing chemical emulsion like CHLORPYRIPHOS or other chemicals approved by central Insecticides Board or as directed by the manufacturer and spraying the mixture uniformly by sprayer as pre-constructional anti termite treatment and creating a chemical barrier under and around wall trenches, basement excavation, top surface of plinth filling, junction of walls and floors along with external perimeter of the building, surrounding the pipes and conduits etc. complete at the rate of 7.5 litres ( or as directed by the manufacturer) per sqm on vertical and 5.0 liters per sqm on horizontal surfaces, 50% of the emulsion to be filled in the holes made in trenches at 150mm center to center etc. complete.as per IS:6313/1981 (PART-II) and as per the direction of engineer-in-charge including all cost of materials labour, taxes etc. all complete. With Chlorpyriphos/Lindane E.C. 20% with 1% concentration |
| 6 | Providing and laying of P.C.C. of 1:4:8 with 4 c.m size hard granite metal in foundation trenches, under floors in line level including curing and ramming etc. all complete as per the direction of the Engineer-in-charge. A)TOILET, B) BELOW FLOOR |
| 7 | R.C.C. work of M-25 grade with 20mm and down grade black hard granite (crusher broken) stone chips including hosting and laying with Centering & Shuttering etc. all complete as per the direction of the Engineer-in-charge. RCC in Portico Column Foundation. TOILET PLINTH BEAM |
| 8 | RCC in Plinth beam YOGA |
| 9 | RCC roof beam & Columns(Ground Floor) |
| 10 | RCC in roof slab ground floor |
| 11 | RCC in Lintel |
| 12 | Staircase |
| 13 | RCC in chajja |
| 14 | Providing M.S reinforcement for R.C.C work including cutting, bending, and tying the grlls and placing in position including cost of binding wire 18 to 22 gauge etc. complete as per the direction of the Engineer-in-charge. |
| 15 | Fly Ash Brick Masonry in cement mortar of mix (1:6) using Fly Ash bricks of size 25 c.m x 11 c.m x 8 c.m in Foundation & Plinth |
| 16 | Fly Ash Brick Masonry in cement mortar of mix (1:6) using Fly Ash bricks of size 25c.m x 11 c.m x 8 c.m in superstructure |
| 17 | Providing 6mm. Thick cement plaster 1:4(1 Cement:4 Sand) to Roof ceiling as per the direction of the Engineer-in-charge. |
| 18 | Providing Avg. 20 mm thick cement plaster 1:4 (1 cement : 4 sand) to outside surface etc., as per the direction of the Engineer-in-charge. |
| 19 | 16mm thick Cement Plaster (1:6) over Brick Masonry finished smooth in Ground Floor |
| 20 | Providing Avg. 12 mm thick cement plaster 1:6 (1 cement : 6 sand) to inside surface etc. as per the direction of the Engineer-in-charge. |
| 21 | Painting 2 (Two) or more coats with Weather Coat Paint of premium brand Such as Asian/ Berger/ ICI paints or equivalent of approved quality & colour, using required quantities of paint as specified by the manufacturer to give an even shade over a coat of wall priming(water based) on the finished external plastered surface at all height , watering the surface before applying the Weather Coat Paint and curing for the required period including cost, coveyance, loading , unloading ,stacking and all taxes , cost of all Labour, Labour cess, Sundries ,Scafffolding ,Staging and T&P etc. required for the work complete in all respect as directed by the Engineer-in-charge. Outside |
| 22 | Cement Base Putty |
| 23 | Supplying and painting of internal walls and ceiling with two or more coats of ACRYLIC emulsion paint with a coat of primer all complete. The shade and brand to be of approved brand & shade over the surfaces including preparation of surface, with cost of all materials, labour, conveyance taxes of all materials,scaffolding etc., as per the direction of the Engineer-in-charge. |
| 24 | Supplying, fitting and fixing vitrified tile in floors of size 600mm x 600mm of approved make conforming to I.S 13755 laid on 20 mm thick cement mortar (1:4) (1 cement : 4 sand )and filling joints with white cement of approved quality including cost of all materials, labour T&P etc.required for the work all complete as per direction of engineer in charge. |
| 25 | Fixing vitrified tiles (600mm x 600mm) in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete as per direction of engineer in charge. |
| 26 | Fixing Ceramic tile (300mm x 300mm) in floors treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1cement : 1sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete as per direction of engineer in charge. Toilet |
| 27 | Fixing Ceramic glazed wall tile in dados skirting and risers of step on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades on the tiles etc. complete as per direction of engineer in charge. |
| 28 | Fixing Granite tiles (19MM thk) in floors treads or steps and landing on 25mm thick bed of cement mortar 1 :1 (1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades on the tiles etc. complete as per direction of engineer in charge. |
| 29 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge),minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dashfasteners of required dia and length including supply of material complete as per direction of Engineer-In- Charge. Frame size 65 x 150 mm (26.86.7) |
| 30 | Providing and fixing 30 mm thick factory made single extruded WPC (Wood polymer composite) solid plain flush door shutter of required size fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all complete as per direction of engineer in charge. |
| 31 | Supplying, fitting, fixing up window (sliding type) made up aluminum Section 151-154, 151-155, as windows frame section No. 151- 155, 151-153 and 151-167 as shutter frame with 5mm thick black glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer-incharge. |
| 32 | Providing and fixing unplasticised poly vinyl chloride (uPVC) door panels with Frame, shutters, fixtures in cluding all fittings and cost, conveyance of all materials, labours and T&P required for the work etc, all complete as per direction of engineer in charge. |
| 33 | Supplying, fabricating and fixing MS grills including two coat enamel paint over a coat of red oxide primer and screws as may be required etc. with cost , conveyance, taxes of all materials, labour, T & P etc. required for the complete in all respect as per the direction of Engineer-in-charge. |
| 34 | Supplying , fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with balustrade of size 32mm x 32mm x 2mm @ 0.90mtr.C/C and stainless steel squara pipe bracing of size 32mm x 32mm x 2mm in 3 rows in staircase as per approved design & specification, buffing, polishing etc with cost of conveyance, taxes of all materials , labour, T & P etc. required for the complete in all respect as per the direction of Engineer-in-charge. |
| 35 | Providing average 25 mm thick grading concrete (1:2:2) on roof slab with 6mm size hard granite chips as per the direction of the Engineer-in-charge. |
| 36 | Making plinth protection 150 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm bed of dry brick ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. |
| 37 | Staircase Headroom:Fly Ash Brick Masonry in cement mortar of mix (1:6) using Fly Ash bricks of size 25c.m x 11 c.m x 8 c.m in 1st Floor |
| 38 | R.C.C. work of M-25 grade with 20mm and down grade black hard granite (crusher broken) stone chips including hosting and laying with Centering & Shuttering etc. all complete as per the direction of the Engineer-in-charge. Head Room Slab |
| 39 | Providing M.S reinforcement for R.C.C work including cutting, bending, and tying the grlls and placing in position including cost of binding wire 18 to 22 gauge etc. complete as per the direction of the Engineer-in-charge. |
| 40 | Providing 6mm. thick cement plaster (1:4) over concrete surfaces in the 1st floor. |
| 41 | 16mm thick Cement Plaster (1:6) over Brick Masonry finished smooth in 1st floor |
| 42 | 12 mm thick Cement Plaster (1:6) over Brick Masonry finished smooth in 1st floor |
| 43 | Painting 2 (Two) or more coats with Weather Coat Paint of premium brand Such as Asian/ Berger/ ICI paints or equivalent of approved quality & colour, using required quantities of paint as specified by the manufacturer to give an even shade over a coat of wall priming(water based) on the finished external plastered surface at all height , watering the surface before applying the Weather Coat Paint and curing for the required period including cost, coveyance, loading , unloading ,stacking and all taxes , cost of all Labour, Labour cess, Sundries ,Scafffolding ,Staging and T&P etc. required for the work complete in all respect as directed by the Engineer-in-charge. |
| 44 | Supplying and painting of internal walls and ceiling with two or more coats of ACRYLIC emulsion paint with a coat of primer all complete. The shade and brand to be of approved brand & shade over the surfaces including preparation of surface, with cost of all materials, labour, conveyance taxes of all materials,scaffolding etc., as per the direction of the Engineer-in-charge. |
| 45 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dashfasteners of required dia and length complete as per direction of Engineer-In- Charge including cost of (M.S hold fast/lugs or SS dash fasteners with fitting fixingbe paid for separately charges). |
| 46 | Providing and fixing 30 mm thick factory made single extruded WPC (Wood polymer composite) solid plain flush door shutter of required size fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all complete as per direction of engineer in charge. Frame size 65 x 150 mm (26.86.7) |
| 47 | Providing average 25 mm thick grading concrete (1:2:2) on roof slab with 6mm size hard granite chips as per the direction of the Engineer-in-charge. |
| 48 | Paver Road: Filling in foundation trenches and plinths with filling sand, well watered, compacted, dressed and leveled to proper gradient etc., complete as per the direction of the Engineer-in-charge. |
| 49 | Supplying and fixing of 80mm thick cement concrete interlocking paver block of M-40 grade of approved make, design, colour and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRC SP - 63:2018. (item 25.17.2 OPWD, SR 2022 (Page 233) |
| 50 | Supplying and fixing of Pre cast kerb stone of size 600mm x 300mm x 150mm of M-30 grade of approved make, design, colour and size made by Block making machine with proper compaction fixed in required pattern etc. complete in all respect conforming to IS 5758:1984 (item 25.17.4 OPWD, SR 2022 (Page 234) |
| 51 | Cleaning the are, removal of the weed root, debris etc. including excavation, provisionof anti termite treatment, refilling with good soil and well decomposed cattle manure in 4:1 ratio and rough dressing, supply and planting of approved species of selection No 01 grass forming a thick lawn and should be healthy and free from any diseases and weeds and fit for mowing. |
| 52 | B) PH & SANITARY WORKS-INTERNAL PH WORKS:-Supplying all materials, labour and T&P for fitting and fixing white glazed vitreous china porcelain European water closets of approved make confirming to IS-2556 and top inlet for sinking into floor with 100mm PVC 'P' trap etc. including supply of necessary cement concrete for fitting the closet etc. complete in all respect in all floors including cost, conveyance and taxes of all materials etc. complete and as per PH specification and direction of Engineer-in-charge. |
| 53 | Supplying all materials, labour and T&P for fitting and fixing white glazed vitreous china porcelain flat back urinal pan of approved make confirming to IS-2556 and top inlet for sinking into floor with 100mm PVC 'P' trap etc. including supply of necessary cement concrete for fitting the closet etc. complete in all respect in all floors including cost, conveyance and taxes of all materials etc. complete and as per PH specification and direction of Engineer-in-charge including marble partition in between urinals. |
| 54 | Supplying all materials, labour and T&P for fitting and fixing white glazed vitreous china porcelain wash basin of size 450mm x 300mm of approved make confirming to IS-2556 and top inlet for sinking into floor with 100mm PVC 'P' trap etc. including supply of necessary cement concrete for fitting the closet etc. complete in all respect in all floors including cost, conveyance and taxes of all materials etc. complete and as per PH specification and direction of Engineer-in- charge. |
| 55 | Supplying all materials, labour, T&P and fixing standard sized CP Bib cock of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 56 | Supplying all materials, labour, T&P and fixing standard sized 15mm dia Angular Stop cock of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in- charge. |
| 57 | Supplying all materials, labour, T&P and fixing standard 15mm sized pillar cock of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 58 | Supplying all materials, labour, T&P and fixing standard sized Long body 15mm dia CP Bib cock of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in- charge. |
| 59 | Supplying all materials, labour, T&P and fixing standard sized two way CP Bib cock of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in- charge. |
| 60 | Supplying all materials, labour, T&P and fixing standard sized shower (Health Faucet) of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in- charge. |
| 61 | Supplying all materials, labour, T&P and fixing standard sized Chromium Plated brass towel rail complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screws as per specification and direction of the Engineer in charge |
| 62 | Providing and fixing circular type stainless steel jalli (grating) with hole for floor /nahani trap etc complete as per PH specification and direction of the engineer in charge |
| 63 | Fixing 600x450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with Chromium Plated brass screws and washers complete as per specification and direction of the Engineer in charge |
| 64 | Supplying all materials, labour, T&P and fittings and fixing of Poly Propelene white double layer water storage Tank of approved make confirming to IS 12701-1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc including hoisting upto terrace level and placing the tank to the required position etc all complete as per PH specification and direction of Engineer-in-charge. (To provided with brick masonary guard walls which will be paid separately) |
| 65 | Supplying all materials, labours, T&P and fitting and fixing of the following size of CPVC pipe confirming to IS 15778 certification mark with socket and screw joints in walls and floors including supplying of required number of fittings of approved make including cutting threads to pipes and pipes to length, including wastage,etc for fitting to the walls with supply of holder ats, clamps, fixing wooden plugs in walls, including testing of pipe line for water tightness complete as per IS specification including cost, conveyance and taxes of all materials all complete as per PH specification and direction of Engineer-in-charge. 15 mm dia |
| 66 | 20 mm dia |
| 67 | 25 mm dia |
| 68 | 32 mm dia |
| 69 | 40mm dia |
| 70 | 50 mm dia |
| 71 | Providing all materials, labour, Fitting & fixing of CPVC Ball Valve with CTS socket. Make : Prince). 25 mm dia |
| 72 | 32mm Dia |
| 73 | 40mm dia |
| 74 | 50mm dia |
| 75 | Supplying all materials,labours,T&P for cutting holes through existing brickwork including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in-charge. |
| 76 | Supplying all materials,labours,T&P for cutting holes through existing RCC floors & roofs including making good the damages for taking GI pipes and fittings/PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in-charge. |
| 77 | Supplyng all materials, labour, T&P for construction of brick masonary Gulley trap chamber of size300mm x 300mm with CI gulley trap, by Fly ash brick masonry in CM (1:4), CP (1:6) with 150mm x 150mm CI grating including labour and materials for fitting and fixing 100mm dia square mouth CI gully trap with supply of all jointing materials and encasing the gully trap with a block of CC (1:4:8) with 25mm size hard stone metal all complete with providing and fixing of 250mm x 250mm precast RCC cover slab including cost, conveyance, taxes of all materials to site complete as per the PH specification and direction of Engineer-in-charge. |
| 78 | Providing all materials labour, T&P for making grooves in bricks/stone masonary walls vertically or horizontally up to required depth and width in all floor for laying of pipes and fittings up to 50mm dia, testing the joints with required water pressure and making good the damages with cement concrete 1:2:4 with 12mm size h.g.c.b.chips and finished smooth with cement morter (1:4) to original shape including cost of all materials, curing, conveyance of all materials etc. all complete excluding GST as per specification & direction of Engineer-in-charge. |
| 79 | EXTERNAL PH: Supplying all materials, labour, T&P, fitting & fixing of 50mm dia brass / GM Full way Valve of approved make including supply of all necessary jointing materials such as red lead paint, yarns etc. including cost, conveyance & taxes of all materials, T&P etc. all complete as per P.H. specification and as per the direction of the EIC. |
| 80 | Supplying all materials, labours, T&P and fitting and fixing of the following size of CPVC pipe confirming to IS 15778 certification mark with socket and screw joints in walls and floors including supplying of required number of fittings of approved make including cutting threads to pipes and pipes to length, including wastage,etc for fitting to the walls with supply of holder ats, clamps, fixing wooden plugs in walls, including testing of pipe line for water tightness complete as per IS specification including cost, conveyance and taxes of all materials all complete as per PH specification and direction of Engineer-in-charge. 50 mm dia |
| 81 | Supplying all materials & labour, T&P and constructing brick masonary chamber for water sluice valve, single air valve & non return valve with Fly ash brick masonary in cement mortar (1:4) as per approved drawing and specification CC (1:4:8) with 4cm size hard granite metal on the bed, 12mm cement plaster (1:6) to inside and cement flush pointing (1:6) to outside surface with 100mm thick RCC M20 cover slab with 20mm hg chips using required quantity of tor steel, centring and shuttering to the slab and dismantling it after 31 days of casting, filling the outside cavity with excavated materials, watering, curing including cost, conveyance, taxes of all materials, labour charges for cutting, bending, binding and tying the grills in proper position etc all complete as per drawing, design and direction of Engineer-in- charge. Chamber (0.75x0.75x0.7mtr) |
| 82 | Supplying all materials, labour, T&P and fitting and fixing of double air valve of 50mm Dia confirming to the relevant IS specification and dimension including fixing it in position along the pipeline with supply of all required materials such as rubber insertion, nuts & bolts including cost of all materials, taxes, and duties, transportation charges from store to site etc all complete as per the direction of Engineer-in-charge. |
| 83 | Supply, installation, testing and commisioning of automatic star delta control panel suitable for 2 HP pumpset including MS box fitted with main switch ,contactor, single phasing preventer, timer, selector switch, voltmetre, ammeter etc and connection with motor inside the sump with suitable cable etc complete as per the Direction of Engineer-in-charge. (Excluding power supply)(MR) |
| 84 | SEPTIC TANK:Earth work in excavation in Hard rock by mechanical means (Hydraullic excavator)/ manual means overareas (exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan) inculding disposal of excavated earth up to 50 m and lift upto 1.5m with all lead and lift including shoring, shuttering & dewatering (if required) with cost of all Labour, Labour cess ,Hire & Running charges of the water pumps, T & P required for the work complete as directed by the Engineer- in- charge. Earth work excavation beyond 1.50mtr depth |
| 85 | Supplying and filling the Foundation & Plinth with clean coarse river sand of approved quality from approved quarry, laying in layers not exceeding 150mm thick, watering and ramming including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge. |
| 86 | Providing & laying cement concrete of prop. (1:4:8) in foundation bed and floors using 40mm nominal size down graded, screened, washed hard black crusher broken granite metal of approved quality & from approved quarry including laying in the layers not exceeding 100 mm thick, etc |
| 87 | Providing and laying in position ready mixed M25 grade concrete having compressive strength at 28 days test not lessthan 250kg/sq.cm for reinforced cement concrete work using cement content as per approved design mix etc. Foundation |
| 88 | RCC Wall |
| 89 | Cutting,straightening coiled or bent up HYSD/TMT Reinfocement Bars welding or jointing if necessary ,bending, binding,tying the grills as etc |
| 90 | Providing 12mm. thick cement plaster with cement mortar of mix (1:4) in all floors cement and with screened and washed sharp sand for mortar with neat cement punning finished smooth to brick/RCC walls after racking out the joints including watering and curing complete with cost, etc |
| 91 | Providing and laying of P.C.C. of 1:4:8 with 40 mm size hard granite metal in foundation trenches, under floors in line level including curing and ramming etc. all complete as per the direction of the Engineer-in-charge.. |
| 92 | Finishing walls with water proofing cement paint of approved shade on new work Two coat to give an even shade |
| 93 | Back filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 0.3m. in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5m. |
| 94 | Supplying all materials, labour, T&P, fitting and fixing uPVC SWR pipes (Type-B)(Co-moulded Ring type) of approved make confirming to IS-13592/1992with ISI marked, both below & above ground level or fixing on wall surface in all floors including transportation & scaffolding etc. all complete as per specification excluding GST & direction of the Engineer-in-charge. Pipe 110mm dia |
| 95 | 110mmx110mm 'P' Trap (Make:Astral) |
| 96 | 110mmx87.5º Plain bend |
| 97 | 110mmx87.5º Door bend |
| 98 | 110mmx45º Plain bend |
| 99 | 110mm dia single 'Y' withoutdoor |
| 100 | 110mm WC connector/Bend with lip ring |
| 101 | 110mm Socket plug |
| 102 | 110mm Pushfit Coupler |
| 103 | Upvc Tee (150 x 150 x 150)mm |
| 104 | Upvc Elbow |
| 105 | C) ELECTRICAL WORKS: Wiring for light point/ fan/ exhaust fan point/ call bell point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable in surface / recessed 2 mm thick PVC conduit with modular switch and earthing the point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable including providing modular box with cover of requisite number of modules including providing cover plates as required. Single light point controlled by one 6A switch or first light point of group control.Make Conduit:Norepack/Precision/AKGWire-KEI/Havells/FinolexSwitch/socket-Legrand (myrius)/Panasonic(vision)/schneider(zencelo) |
| 106 | Subsequent point of group control |
| 107 | Supplying and fixing two module steeped type electronic fan regulator with proper modular plate switch box including connections etc. as required.Switch/socket-Legrand (myrius)/Panasonic(vision)/schneider(zencelo) |
| 108 | Supplying and fixing 6 Amp plug with 6 Amp switch (Modular Type) on existing board. |
| 109 | Supplying and fixing including testing and commissioning of 6A modular socket outlet with 6 Amp switch including providing GI modular box with faceplate etc as required. 1 nos 6 Amp 3-pin socket with 6 Amp switch. |
| 110 | 2 nos 6 Amp 3-pin socket with 2 nos 6 Amp switch. |
| 111 | Supply, installation, testing & commissioning of 6 / 16 Amp Plug Boards consisting of a 16 Amp clip-in type modular switch with indicator and a 6/16 Amp clip-in type modular socket fixed on metallic concealed box including interconnections and making good the damages caused complete as required and as per direction of Engineer-in-charge. |
| 112 | Supplying, installation, testing & commissioning of 25 amp modular socket outlet on surface or in recess, on 1 Nos two module GI box with plate for socket point and one nos two module GI Box with face plate for switch etc. complete as direction of Engineer-in-charge. As per Crabtree(cat no-ACT0202504) or equivalent of Legrand/Schneider. |
| 113 | Wiring for circuit/ submain wiring along with earth wire of following size of FRLS heavy gauge PVC insulated copper conductor single core cable in heavy duty PVC conduit laid in surface/ recess as required. 2X2.5 + 1X2.5 sqmm FRLS Cu wire (for Light circuit wiring) |
| 114 | 2X4 + 1X4 sqmm FRLS Cu wire (for power plug & SPN DB submain) |
| 115 | 4X6 + 2X6 sqmm FRLS Cu wire (submain) |
| 116 | 4X10 + 2X6 sqmm FRLS Cu wire (ACDB submain) |
| 117 | Supply, delivery and fixing of Ceiling fan hook box made out of 18 swg GI sheet and containing 10 mm dia round ms bar projecting atleast 150mm on either side & duly bent to accommodate ceiling fan down rod bolt & having earthing arrangement as per direction of Engineer-in-charge. |
| 118 | 36Watt LED Light fitting (3300 Lumen) for PHILIPS .(CAT No:RC365B LED33- 6500 PSU OD WH)/ Equivalent of Halonix/Panasonic/crompton as required |
| 119 | 20Watt LED Surface/suspended Battern Linear Luminaire (2000 Lumen) PHILIPS (CAT No:WT150C LED20S-6500 PSE OD GR) / Equivalent of Halonix/Panasonic/crompton |
| 120 | 15Watt LED Down Light fitting (1500 Lumen) PHILIPS (CAT No:DN296B LED15S-6500 PSU WH S1) / Equivalent of Halonix/Panasonic/crompton |
| 121 | 6Watt LED Light fitting (600 Lumen) PHILIPS (CAT No:DN191B LED6S-6500 PSU WH S1) / Equivalent ofHalonix/Panasonic/crompton |
| 122 | LED Bulk head Light fitting (600 Lumen) for PHILIPS .(CAT No:WT202W LED6S CW PSU S2 PC)/ Equivalent of Crompto/ Wipro as required |
| 123 | Supplying, installation, testing and commissioning of ceiling fan (5 star rating) including wiring the down rod, earthing etc as required (Make : Bajaj/Usha/ Crompton/ Orient/ Khaitan/ Havells). 1200 mm sweep |
| 124 | Supplying, installation, testing and commissioning of Exhaust fan / fresh air fan with louvre (Make -Bajaj/Usha/ Crompton/ Orient/ Khaitan/ Havells) as required. 225 mm sweep fibre body fresh air fan |
| 125 | DBS: Supplying and fixing following way, TP and neutral, sheet steel, MCB distribution board, IP-43,IK09 with metal door ,415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCBOs/ISOLATORS). Make-Legrand(Ekinoxe3/siemens(Betaguard)/Schneider Acti9. 6 way, Double door |
| 126 | Supplying and fixing following way,single pole and neutral, sheet steel, MCB distribution board,IP-43,IK-09, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCBOs/ISOLATORS). 12 way, Double door |
| 127 | Supplying and fixing following rating RCBOs/ MCBs in the existing DB complete with connections,testing and commissioning etc. as requiredMake-Legrand/L&T/ABB. 63 Amps4P, 100 MA RCBO |
| 128 | 32 Amps DP, 30 MA RCBO |
| 129 | 6 Amp to 32 Amp, 10 KA SP MCB (C-Curve) |
| 130 | Supplying and fixing of following sizes of heavy gauge PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm |
| 131 | 25 mm |
| 132 | Supplying and fixing of following sizes of heavy gauge steel conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm |
| 133 | B) PANEL: Supply, installation, testing & commissioning of floor mounting front operated front access extensible type cubicle panel totally enclosed, dust and vermin proof with IP-42 /55 protection with hinged and lockabale doors.CRCA sheets including interconnections, tinned copper crimping lugs, bonding to earthand painting suitable for use at 415 V, 3phase 4 wire 50 Hz system, and to withstand a fault level of 35KA symmetrical for 1 sec at 415 V complete as per specifications, as required and as below: All switchboards shall have provision for entry of cables from the bottom as required. All live. MAIN PANEL with 63A 4P MCB-1 No as incomer, 32A 4P MCB-3 Nos, 32A 2P MCB-12 Nos as Outgoing.(Detail QAP must be submitted from reputed farm and competent authority before work execution) |
| 134 | C) EARTHING: Earthing with G.I. earth plate 600 mm x 600mm x 6 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc (But wih out charcoal and salt) as required. |
| 135 | Extra for using salt and charcoal for G.I or copper plate earth as required |
| 136 | Supplying and laying 25 mm x 6 mm G.I earth strip ISI marked at 0.5 meter below ground level as strip earth electrode including soldering etc. as required. |
| 137 | Supplying and laying 25 mm x 5 mm G.I earth strip ISI marked on surface or in recess for connection etc as required. |
| 138 | Providing and fixing 6 SWG G.I. wire on surface or in recess for loop earthing as required. |
| 139 | Supply, delivery & installation of Gl coil earthing made out of 8 swg Gl wire closely wound in shape of a helical coil of 50mm diameter with 115 numbers of turns including excavation of earthpit of size 800x 800x 1500mm in all kinds of soil, back filling the excavated pit with alternate layers of salt, charcoal around the coil with a diameter of 300mm upto 1000mm and balance by good quality soil, end termination complete as required. |
| 140 | D) External Lighting: 4M long G.l.octagonal pole complete with RCC foundation, required G.I base plate, single-arm of ERW galvanised pipe 30mm - 0.5M length, providing Gl pipes for cable entry junction box with prewired 6 Amp SP MCB, loop-in-loop-out, terminal block, wiring with copper wire upto the fitting etc, complete |
| 141 | Supply, fixing & termination of Outdoor Street Light LED Luminaire with 45w LED Lamp similar to JAQUAR Cat No. LSRT01S045XC or equivalent |
| 142 | Supply, fixing & termination of 50watt LED for use as Gate Light fitting complete with cover, Gl pipe bracket, necessary wiring from loop-in-box with 3Cx1.5 sqmm copper wires inside PVC pipes etc complete as required with all materials (crompton/polycab/havells/hpl/phillips/equivalaent make) |
| 143 | Supply & fixing of Decorative Bollard LED Fixture With Die Casted and extruded Aluminum Body & poly carbonate Opal Diffuser 700mm height in wood finish suitable for LED LAMP with junction Box. (crompton/polycab/havells/hpl/phillips/equivalaent make) |
| 144 | Supply & fixing of Mini Spike light fixture Equiv. to 7 WIPRO LF05-450-036-27-XX With ZGP662 SPIKE and Junction Box. |
| 145 | Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of 2Cx 6 sq.mm Al.direct in ground in the same trench in one tier horizontal formation including excavation sand cushining protective covering and refilling the trench etc. as required. |
| 146 | Supplying and making end termination with brass compression gland and aluminum lugs for 2C x 6 sq.mm of PVC insulated and PVC sheathed / XLPE aluminum cable of 1.1 KV as required. |
| 147 | Supplying and fixing of 16 / 18 SWG metal box of 200 mm x 150 mm x 60 mm deep on surface / recess with suitable size of phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recessed conduit as required. |
| 148 | Supplying and fixing of of 50mm G.I pipe(Medium Class) along with accessories in ground including cutting & making good the same as required. |
| 149 | Supply, instalation, Testing of sub-earthing with 16 Sq.mm single core multi stranded copper flexible wire iron surge protection device(SPD) panel to earth, electrode and main panel board to SPD panel including all accessories. Cable socketing and connections Make-FINOLEX/ANCHER/HAVELS. All the work should be carried out as the specified specifications and instruction by the Engneer-in-Charge. |
| 150 | Supply , installation, Testing & Commissioning of INDORE TYRE WALL MOUNTED SURGE PROTECTION DEVICE(spd) PANEL MADE OF 2 MM thick CRCA SHEET , dust and vermin proof duly powder coated having the following arrangement and complete factory wire by 16 Sq.mm single core multi protection device(SPD) (tp+n) (50 KA)-01 SET(B) 63 AMP, HRC fuse with ink 03 nos. (c) 100 Amp-4 POLE STUD Connector #01 no-63A Make of SPD & HRC Fuse:- HAVELS/L & T/LEGRAND. Make of wire: FINOLEX/ANCHER/HAVELS. All the work should be carried out as the specified specifications and instruction by the Engineer-in- Charge. |
| 151 | D) WATER SPRINKLER SYSTEM: PIPE WORK- Providing, laying & jointing in position PVC pipe conforming to ISI standard and suitable for the respective working pressures with all fittings and accessories e.g. couplings, tees, bends, reducers, screwed adapters, flanged tail pieces etc. jointing as per manufacturers' instruction, Make: Suprim/Finolex/Jain . PVC pipe 50mm-6 kg/cm2 |
| 152 | SPRINKLERS & ACCESSORIES: Providing & fixing of Rotatory Pop up having colour coded MP Rotator nozzle with WITH PRO-SPRAY SPRINKLER BODIES WITH 1½\\" INLET capable of covering 2.5m- 10.7m with Matched Precipitation Rate The Spray Head body shall be constructed of heavy-duty, ultraviolet resistant plastic and stainless steel spring with mutifunctional wiper seal with small exposed cover. Make: Hunter/Rain Bird |
| 153 | Providing & Fixing of SJ-512, 1/2\\" Pop up Connecting Four Elbow Swing joint Assembly. The fittings shall be made of UV resistant thermo plastic. Make: Hunter/Rain Bird |
| 154 | Providing and fixing of PP/PVC service saddle of varying size. 1/2' |
| 155 | DRIP LATRAL AND ACCESSORIES: Supply and fixing of flexible Blank tubing and resistance to UV damage and algae growth black in colour 16 mm size. With all fittings and accessories. (Plain Dripline 16 mm 50cm 3.8 Iphinline lateral) Make: reputed make |
| 156 | Supply and Fixing Rod Comes Pre-Bent or plastic lateral stack to Staple Distribution Tubing, Drip Line to Finished Grade. Make: reputed make |
| 157 | VALVES & ACCESSORIES: Providing and fixing of PVC Ball Valve, security pivot to maintain lever in space, double water tight joint, direct injection stem non mechanical,with a base which permits maximum penetration into the valve of size 63mm. Make: FINOLEX/PLASON/JAIN/equivalent |
| 158 | Providing & fixing of Pressure Relive & Isolation Valve in mainline for bypass and flow diversion of approved quality. Make: BERMAD/AZUD/DOROT/equivalent |
| 159 | Providing & fixing of a double acting 1\\" Air release valve, The Air release valve shall be capable of both releasing and admitting air from and into the line. The working pressure shall be 5 bar. Including service saddle and riser assembly. Make: BERMAD/AZUD /DOROT /equ |
| 160 | Providing & fixing of 12\\" Rectangular Valve Box with greenlid and corrugated structure with unique shovel access slot and bolt hole knockout. Make: Hunter/Jain lequ |
| 161 | Providing & fixing of 6\\"Round box with greenlid and corrugated structure with unique shovel access slot and bolt hole knockout, Make: Hunter/Jain/equ |
| 162 | Providing & fixing of Brass Quick coupling valve made up of solid brass with locking cover corrosion resistant and stainless steel spring. Including service saddle and riser assembly. Make: Hunter/Jain /equ |
| 163 | Providing & fixing of Brass Key threads into top of QCV to provide water access And Brass Swivel Elbow. Make: Hunter/Jain /equ |
| 164 | FILTERATION UNIT: Providing & Fixing of SCREEN FILTER- with capacity matching pump design flow having an suitable inlet connections, & maximum working presure of 10 Bars. with pressure gauge. Make: Rain birdi |
| 165 | PUMPING SYSTEM: Supply, Installation & Commissioning of continuous duty Vertical centrifugal inline multistage high pressure pumps complete with AISI 304 stainless steel impeller AISI 304 stainless steel pump casing, CED coated Cast Iron Base & head. The mechanical shaft seal shall be cartridge type. Pumps shall have an integrated frequency convertor and a Pl controller incorporated within the motor terminal box. Motor shall be a vertical, totally enclosed fan-cooled, permanent magnet type with principal dimensions according to EN 50347 standards. Electrical tolerances shall comply with IEC 60034. The combined motor and frequency converter efficiency shall be to IE5. Motor shall be to with IP 55 enclosure, designed for up to 50 deg ambient temperature. Motor shall be suitable for operation on a 3 X 380-500V (± 10% variation), 50-60Hz ± 5%, 3phase AC supply. Pump and motor shall be factory aligned, and shall be installed by the contractor as per recommendations from the manufacturer. Motor shall require no external motor protection and shall incorporate thermal protection against steady overload and stalled condition (IEC 34-11). Pump shall have provision to accept data communication interface module for transmission between pump and external system. Modules shall accept protocols of Modbus RTU or BACnet MS/TP.(QAP must be submitted before taking up to the work) Vendor to submit proposed pump model with duty curve as per below specification. Flow rate : 10 m3/hr each. Head : 100 Mts. Motor Rating : 4 KW. Pump Efficiency: 70% minimum. Both pumps will be running in automatic through pressure transmitters. Pump Make: Grundfos / equivalent |
| 166 | E) LANDSCAPING AREA: Development of lawn and maintenance for 3 months at initial stage. Transportation and spreading of soil at an average depth of 0.15 mts, shaping of land transportation good garden soil (loam texture) spreading over an average depth of 0.15 mts. Rolling application of manure, fertilizer, pesticides etc. incorporation in the soil then planting of grass selection -I inclusive cost of grass maintaning for 3 months by providing irrigation widding mannuring, providing pest control measure and hanging over the weed free lawn properly mowned including cost of soil and grass. Supplying and stacking of good earth at site including royalty and carriage complete (earth measured in stacks will be reduced by 20% for payment). NOTE:- clay mortar rate is taken from shedule rate of odisha and clay is the most suitable material for growing plants. Total Park area. he park coverd with road and other. Water Body. Filling with good earth in a average 150mm thick. |
| 167 | Supplying and stacking at site dump manure from approved source, including carriage complete (manure measured in stacks will be reduced by 8% for payment). |
| 168 | Grassing with selection No. 1 grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the good earth shall be paid for separately). |
| 169 | Supplying & planting tress at an height of 2 mtr of different species, flowering, ornamentals, medicinals, shade giving tress etc. Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or /and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure). |
| 170 | Supplying of 4 seater concrete chair Garden eqipments including fixing at work site etc. complete a per yhe direction of EIC. |
| 171 | F) FIRE FIGHTING SYSTEM: CO2.-Type Fire Extingusher, Make: SAFE PRO BRAND: SUPER SAFER Approval: ISI Marked as per BIS-15683 type: Stored Pressure Extinguishing Media: CO2 Gas Hydraulic Test Pressure: 250 Kgf/cm2 Operating Tem:-30 Dec.to +60 C Minimum Effective discharge: 95% Capacity: 4.5 kg Fire rating: 21B Discharges time: Min 8 sec Discharge range: 2 mtr. Base price= Rs. 4400.00. Cont. Profit + OHC (15%) = 660.00. Labour Cess (1%) = 44.00.Transport Charges (7%)= 308.00. TOTAL-5412.00 |
| 172 | Fire Extingusher, Make: SAFE PRO BRAND: SUPER SAFER Approval: ISI Marked as per BIS-15683 Body: Mild steel Propellent: Nitroge. Hydraulic Test Pressure: 35 Kg/cm2 Service Pressure: 15kg/cm2 Operating Tem:0 Dec.to +55D. C Capacity: 6 kg Fire rating: 21B Discharges time: Min 13 sec Discharge range:3 mtr |
| 173 | Fire Bucket |
| 174 | Fire Stand |
| 175 | Fire Ball = Rs 650.00+104 (16%) = 754.00 |
| 176 | Pass 3\\"X2.5\\" |
| 177 | Add 1% Contigency Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender