|
| 1 | Supplying, Installation, Testing & Commissioning of LED Recessed/ surface Down lighter (Round/square/ Rectangular) SMD type of following body material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -50C to 400C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free (flicker should be below 5%), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K /4000°K / 5700°K / 6500°K (As per ANSI Bin), SDCM (Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be confirming to relevant BIS standards. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing Complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 and <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C)Powder coated die cast /Extruded aluminium Body including trim |
| 2 | 5 - 7 watt |
| 3 | 12 -15 watt |
| 4 | 18 watt |
| 5 | Supplying, Installation, Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, Operating voltage AC 140- 270 Volt, frequency 50/60 hz, Operating temp range-5 °C to 40 °C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10%, P.F.≥0.95, IP20, CRI >80, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm) |
| 6 | 18- 22 Watt |
| 7 | Supply, Installation, Testing and Commissioning of Surface Mounted LED 2x2 feet Panel Light compatible with system wattage of 36W and luminaire lumen package of 4320 lumens, IP20, Colour Temperature 3000K/4000K/5700K/6000K/6500K, CRI >80, SDCM <5, Electrical Insulation – Class-I, Serviceability – Class-B, Ambient Temperature 45°C. The system efficacy shall be >120 lm/W. Inbuilt surge protection 3.5KV, Driver fixed current output suitable for operating voltage range 140-270V AC, THD <10% (at full load). The housing shall be CRCA powder coated white after phosphochromate treatment with high transmittance Polystyrene (PS) opal diffuser for glare free symmetrical light distribution. LED shall satisfy IEC 62471 Photobiological Safety and RoHS standards, with 120° beam angle. Average LED life shall be L70B50 @ 50,000 hours at 45°C ambient temperature. Driver efficiency shall be >85% and Power Factor >0.95. Both driver and luminaire shall be BIS compliant complete as required. Havells Cat. No. PLANO2X2PLR36WLED857S0720 Approved Make: Philips / Havells / Wipro / Crompton / Polycab / C&S / Surya / Orient or equivalent approved by Engineer-in-Charge. |
| 8 | Supply, Installation, Testing and Commissioning of Recess Mounted LED 2x2 feet Panel Light compatible with system wattage of 36W and luminaire lumen package of 4320 lumens, IP20, Colour Temperature 3000K/4000K/5700K/6000K/6500K, CRI >80, SDCM <5, Electrical Insulation – Class-I, Serviceability – Class-B, Ambient Temperature 45°C. The system efficacy shall be >120 lm/W. Inbuilt surge protection 3.5KV, Driver fixed current output suitable for operating voltage range 140-270V AC, THD <10% (at full load). The housing shall be CRCA powder coated white after phosphochromate treatment with high transmittance Polystyrene (PS) opal diffuser for glare free symmetrical light distribution. LED shall satisfy IEC 62471 Photobiological Safety and RoHS standards, with 120° beam angle. Average LED life shall be L70B50 @ 50,000 hours at 45°C ambient temperature. Driver efficiency shall be >85% and Power Factor >0.95. Both driver and luminaire shall be BIS compliant complete as required. Havells Cat. No. PLANO2X2PLR36WLED857S Approved Make: Philips / Havells / Wipro / Crompton / Polycab / C&S / Surya / Orient or equivalent approved by Engineer-in-Charge. |
| 9 | Supply and fixing wall bracket decorative wall light fixture made up of polycarbonate suitable for up to one number 9 Watt LED ball lamp (B-22 base) complete with all accessories and lamp including connection etc. as required. (STYLO Cat. No. LHFOECE1TZ1O014 Havells or Philips / Wipro / Crompton / Polycab / C&S / Surya / Orient or equivalent approved by Engineer-in-Charge.) |
| 10 | Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required |
| 11 | 150 mm X 75 mm X 60 mm deep |
| 12 | 200 mm X 250 mm X 75 mm deep |
| 13 | Supplying and fixing following piano type switch/socket on the existing switch box/ cover including connections etc. as required |
| 14 | 5/6 amps switch |
| 15 | 3 pin 5/6 amp socket outlet |
| 16 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 17 | 5/6 amps switch |
| 18 | 3 pin 5/6 amp socket outlet |
| 19 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 20 | Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required. |
| 21 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 22 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box / wooden block i/c connection etc as required. Please Enable Macros to View BoQ information |
