|
| 1 | Painting old wall surface with two coats of Plastic Emulsion paint of approved quality including cleaning of plaster surface with soaps oda and water by manual labour washing plastered surfaces with soap, soda and water with soda lime etc. |
| 2 | Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors. |
| 3 | Writing Name Board and Art Painting Work in ICDS Room Inner Wall Sides the rate Shall be include the cost of arist , paint scaffolding and all labour charges etc |
| 4 | Labour wrought and put up in position Shutters for fully panelled doors internal five plywood panels including labour charges for fixing furniture fittings complying with standard drawings and standard specification. |
| 5 | Supply of Termite Proof / Water Proof Plywood 19mm thick etc Complete |
| 6 | Supplying and Fixing for 18W 4 Feet LED fitting with LED including Labour Charges Etc Complete SD440 etc Complete |
| 7 | Supply and fixing of 18W LED Round type Recessed fitting with LED (Lower end) on false Ceilingfrom ceiling with PVC unsheathed FRLS copper leads from terminals to the fitting. |
| 8 | Earth work excavation in all kinds of soils except hard rock requiring blasting, inclusive of shoring, trutting and baling out water wherever necessary refilling the sides of foundation with excavated earth in layers of 15cm thick well rammed and consolidated depositing the surplus earth within compound in places as shown by the deptl.officers,clearing and leveling the site with initial lead of 10M and liftof 2M etc.Comp. |
| 9 | Plain cement concrete 1:11/2:3 (One cement One and half sand and three aggregate) using 20mm machine broken gauge hard granite jelly for PCC works the rate excluding the cost of reinforcement grills,centering and shuttering etc. complete |
| 10 | Brick work in CM 1:5 (one cement & Five sand) using II class ground moulded bricks of size 9\\"X4 3/8\\"X 2 3/4\\" standard specification including finishing, curing, etc., complete complying with standard specification (Masonry projections wherever necessary for obtaining required elevation shall be done without extra cost) - Ground Floor |
| 11 | Plain Cement Concrete 1:4:8 (one cement, Four fine aggregates and eight coarse aggregates) using 40mm size ISSHBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc.,complete as per standard specification |
| 12 | Plastering with cement mortar 1:5, 12mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306) |
| 13 | Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing. The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges, etc. complete |
| 14 | Dadooing Supplying and laying in flooring with fully polished Sinthetic Grey colour Granite stone of 10mm thick (average) of 2' X 1' in size laid in cement mortar 1:2 (one cement and two Plastering sand) 20mm thick & pointed with same colour of cement etc., complete as per standard specification |
| 15 | Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification. |
| 16 | Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter Solid panel PVC door with frame |
| 17 | Supplying and Fixing Mosquito net made of Aluminium Channel 3/4\\" x 1/2\\" Size and Shutter Frmae made of Aluminium Frame 1 1/2\\" x 3/4\\" with stainless steel black poweder coat 304 grade mosquito net including fixing the frame with shutter frame by suitable hinges and other accessories such as stopper,handle PVC Corner and fine rubber etc Completed as directed by the Departmental officers |
| 18 | Add GST 18% Please Enable Macros to View BoQ information |
