Tender For Special Repairs To Skylark Mts Building No P-180 At Kattabomman Under Ge Tirunelveli (Tender Id: 2026_Mes_ _1)
Tender Value
2.87 Crore
Estimated cost
Bid Submission
18 Jul 2026
10 days left
EMD
3.62 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tirunelveli → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Skylark Mts Building No P-180 At Kattabomman Under Ge Tirunelveli (Tender Id: 2026_Mes_ _1)
BOQ
| Sl. No. | Item Description |
| 1 | Sch 'A' Part I (Building)Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish removed outside the Defence land complete all as specified and directed. |
| 2 | Demolition of cement concrete of any description and in any position not otherwise described complete all as specified and directed. |
| 3 | Taking down cement plaster on brick walls including raking out joints, hacking for key, scrubbing down with water, etc.complete all as specified and directed. |
| 4 | Taking down chowkats or frames n.exc 1.5 Sqm each with shutters (Without taking of shutters from the frame) and removing from site complete all as specified and directed. |
| 5 | All as per item no 4 above but exc 1.50 sqm and n.exc 4.00 sqm each |
| 6 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed. |
| 7 | Material and labour for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces and fixing of APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt not less than 150 gms/sqm) laid on primed surface by forced application including removal of existing APP membrane and bitumen coats on roof surfaces and clearing debris from site complete all as specified. |
| 8 | Material and labour for providing 40mm thick cement concrete of type B-1, 1:2:4 (20mm graded aggregate) complete all as specified and directed. |
| 9 | Material and labour for rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement) complete all as specified and as directed. |
| 10 | Material and labour for rendering 5mm thick in CM 1:3 on brick or concrete surfaces as in ceiling finished even and smooth (without using extra cement) complete all as specified and as directed. |
| 11 | Material and labour for rendering 10mm thick plastering on fair faces of concrete surface in CM 1 : 4 mixed with water proofing compound @ 0.25% by weight of cement finished even and fair complete all as specified and directed.Note:- Water proofing compound shall be measured and paid separately. |
| 12 | Supply only liquid Water Proofing compound. |
| 13 | Material and labour for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:4 complete all as specified and as directed by Engr-in-charge. |
| 14 | Material and labour for Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc.,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including screed bed or bedding layer of mortar 15 mm thick in CM 1:6 complete all as specified and as directed by Engr-in-charge. |
| 15 | Material and labour for glazed ceramic coloured tiles of size 300x450mmx7mm/350x250x7mm thick on vertical surfaces such as skirtings,dados and riser to steps ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including backing coat of 10mm thick in CM 1:4 complete all as specified and as directed by Engr-in-charge. |
| 16 | Material and labour for providing 40mm thick cement concrete of type B-0, 1:2:4 (12.5mm graded aggregate) finished even and smooth (without using extra cement) complete all as specified and as directed by Engr-in-charge. |
| 17 | Material and labour for 3 mm thick PVC homogeneous sheets, laminated plain coloured, marbled mosaic or mottled finish, laid with approved rubber based adhesive in floors complete all as specified and as directed. |
| 18 | Material and labour for 25mm thick Granite (of any type) work (table rubbed and polished) in floors, steps, jambs, pillars, window cills, cooking platforms and like including 15mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 19 | Material and labour for mild steel Rolled sections as in Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe-410- W(Gde- E-250) quality B1 complete all as specified and directed. |
| 20 | Supply and fixing in repair 4mm thick Aluminium Composite Panel (ACP) of two aluminium skins each of having 0.25mm thick exterior grade of any colour and design as approved by GE for wall elevation to be fixed in aluminium frame work at any height complete all as specified and directed. (Make : Alstrong/VIVA/Eurobond/Virgo or equivalent) as approved by GE. Note : Aluminium frame work shall be measured and paid separately under relevant items. |
| 21 | Material and labour for PCC 1:3:6 type C2 (40 mm graded aggregate) 75 mm thick in plinth protection finished complete all as specified. |
| 22 | Material and labour for Powder coated Aluminium frame for doors, windows, ventilators and frame work for fixing ACP Panels with one or more rebates including joining cleat for fixing etc complete all as specified. |
| 23 | Material and labour for Powder coated aluminium door shutters, aluminium section weighing not less than 1 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges anodised aluminium snap beading screws etc complete all as specified. |
| 24 | Material and labour for Powder coated aluminium windows shutters, sliding/side/top hung type without sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitting such as peg stays 150mm long (1 no) hinges type B-21 100mm long (2 no) suitable handle (1 no) complete all as specified. |
| 25 | Material and labour for anodised aluminium window and ventilator shutters, partitions, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified |
| 26 | Supply and fixing aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium, wire staple complete all as specified |
| 27 | Material and labour for Figured glass,4mm thick, pin head type and glazing with oil putty in squares exc 0.5 sq. m in each pane complete all as specified and directed. |
| 28 | Material and labour for Figured glass,6mm thick, pin head type and glazing with oil putty in squares exc 0.5 sq. m in each pane complete all as specified and directed. |
| 29 | Supply and fixing in repairs Door closer Aluminium Extruded section body hydraulically regulated, designation No. 3,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed. |
| 30 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 31 | Supply and fixing 1.00mm thick laths in Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, push pull or gear operated type with chain wheel and hand chain including necessary electrical connections for the motorised rolling shutter complete all as specified and directed. |
| 32 | Supply and fixing in repair Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed. |
| 33 | Supply and fixing in repair Ball bearing for rolling shutters complete all as specified and directed. |
| 34 | Material and labour for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer exceeding 10cm in width or girth not otherwise described complete all as specified and directed. |
| 35 | Dismantling boarding any description fixed in any position with screws complete all as specified. |
| 36 | Material and labour for 18/19mm thick Prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination, fixed with screws to timber frame work incl suitable PVC edge lipping complete all as specified and directed. |
| 37 | Material and labour for 9mm thick Prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination, fixed with aluminium frame work complete all as specified and directed. |
| 38 | Supply & Fixing of stainless steel Handle fancy type 100 mm size complete all as specified and directed. |
| 39 | Supply & fixing stainless steel hinge of size 65 mm self closing Italian pattern suitable for cabinet and shelves opening / closing operation (fancy type) complete all as specified and directed |
| 40 | Supply & Fixing of Magnet of suitable size fixed for cabin leaves, drawers etc complete all as specified and directed. |
| 41 | Supply and fixing in repairs 100mm Hasp and staple, safety type, anodised aluminium with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 42 | Supply and fixing in repairs CP Health faucet with all accessories complete all as specified and as directed |
| 43 | Supply and fixing in repairs PVC valve less, syphonic action type flushing cistern 10 ltr capacity low level white with inlet ball valve float and handle including brackets complete all a specified and as directed. |
| 44 | Supply and fixing in repairs 15mm bore fancy type CP Pillar taps screwed down high pressure, with or without lettered 'Hot' or cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed. |
| 45 | Supply and fixing in repairs CP fancy type bib taps 15mm screwed down for iron pipe or for brass ferrule complete all as specified and as directed. |
| 46 | Supply and fixing in repairs fancy type CP stop cock/angle cock 15mm screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or unions complete all as specified and as directed. |
| 47 | Supply and fixing in repairs PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed. |
| 48 | Supply and fixing in repairs PVC waste pipe, 32 mm dia for WHB or sink complete all as specified and as directed. |
| 49 | Supply and fixing in repair Towel rail brass chromium plated 20 mm dia decorative fancy type 60 cm long complete all as specified and as directed. |
| 50 | Supply and fixing in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed. |
| 51 | Supply and fixing in repairs Toilet paper holder fancy type chromium plated decorative all as specified and as directed. |
| 52 | Supply and fixing sinks made of stainless steel 1.00 mm thick for kitchen with plugs, washers and waste pipe including bedding in cement mortar on to dwarf wall including fixing cantilever brackets and connecting union to pipe overall size 495mm x420mm and bowl size 410mm x 330mm x 160mm complete all as specified. |
| 53 | Supply and fixing in repairs waste fittings brass chromium plated 32 mm for sinks/basin etc. with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed complete all as specified. |
| 54 | Supply and fixing or laying 20 mm dia CPVC pipe SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down old existing steel tubing and connections of any dia complete all as specified and directed by Engineer in charge. |
| 55 | Supply and fixing in repairs vitreous China wash basin, white, flat back, size 550 x 400mm including waste fittings, brass, chromium plated with long screwed shanks and fly-nuts, flanged end bedded in red lead cement and other end fixed and brackets including cutting for and pinning in ends of brackets or erecting stand etc. complete all as specified and directed. |
| 56 | Supply and fixing in repairs 600 mm x 450 mm bevelled edge mirror or selected quality glass mounted on 6 mm thick AC building board on commercial ply wood and fixed to wooden plug with chromium plated brass screws and cup washer complete all as specified and directed. |
| 57 | Supply and fixing in repairs Vitreous China wash down water closet pan , white/coloured (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and as directed. |
| 58 | Material and labour for plain cement concrete type D2, 1:4:8, 100mm thick in sub base of floor finished even and rough to receive top layer complete all as specified and directed. |
| 59 | Material and labour for Chequered cement concrete tile 20CM x 20CM x 25mm thick with grey cement and pigment set, jointed and pointed in neat cement slurry in floors over and including cement mortar bedding 20mm thick in CM 1 : 6, complete all as specified and directed.. |
| 60 | Supply and fixing solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube and fixing in opening as per specification complete all as specified and directed. |
| 61 | Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specifications complete all as specified and directed. |
| 62 | Supply and fixing Butt hinges, medium weight, cold rolled mild steel, and fixed 100mm long complete all as specified and directed. |
| 63 | Supply and fixing aluminium anodised barrel tower bolts of extruded section 100 mm complete all as specified and directed. |
| 64 | Supply and fixing Extruded aluminium handles fabricated type anodised 150mm long complete all as specified and directed. |
| 65 | Material and labour for Preparation of newly plastered surfaces of walls and applying two coats of emulsion distemper over a coat of alkali resistant primer over 2mm thick wall care putty complete all as specified and directed. |
| 66 | Material and labour for preparation of newly plastered surfaces & applying two coats of emulsion distemper over a coat of alkali resistant primer on ceilings complete all as specified and as directed. |
| 67 | Material and labour for complete removal of existing treatment from old decorated plastered surfaces of wall by vacuum based sanding machine removal of nails etc. & filling cracks/hole with putty, applying 2mm thick wall care putty (Multi purpose mixer shall be used for uniform and proper mixing of putty) and applying two coats of emulsion distemper white or coloured over a coat of primer by auto roller complete all as specified and as directed as per manufacturer's instruction. |
| 68 | Material and labour for complete removal of existing treatment from old decorated plastered surfaces of ceiling by vacuum based sanding machine removal of nails etc. & filling cracks/hole with putty, applying two coats of emulsion distemper white or coloured over a coat of primer by auto roller complete all as specified and as directed as per manufacturer's instruction. |
| 69 | Material and labour for complete removal of existing treatment from old decorated plastered surfaces of wall by vacuum based sanding machine removal of nails etc. & filling cracks/hole with putty, applying 1.5 mm thick wall care putty (Multi purpose mixer shall be used for uniform and proper mixing of putty) and applying two coats of plastic emulsion paint over a coat of primer white or coloured by auto roller complete all as specified and as directed as per manufacturer's instruction. |
| 70 | Material and labour for preparation of existing treatment from old decorated plastered surfaces of ceiling by vacuum based sanding machine removal of nails etc. & filling cracks/hole with putty) and applying one coat of plastic emulsion paint over a coat of primer white or coloured by auto roller complete all as specified and as directed as per manufacture's instruction. |
| 71 | Material and labour for preparation of old decorated steel surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as directed. |
| 72 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 73 | Material and labour for preparing old decorated wooden or wood based surfaces over 10cm width or girth and applying one coat of synthetic enamel paint complete all as directed. |
| 74 | Removal of plasterRemoval of Existing (Cement) plaster upto 40mm thick, including removal of MS Wire mesh, without damage / disturbing the existing structures, raking out joints and cleaning the surface completely using hacking tools and the surface to be free from dust, laitance, oil, grease, algae, fungus and any other foreign material, and disposal of rubbish to the dumping ground within 50 metres lead etc., complete complying with standard specification and as directed by Engr-in-charge at the site. |
| 75 | Surface preparationPreparation of existing surface for new plaster, by sealing / packing the cracks, holes, surface irregularities in the substrate using a polymer modified mortar [Cement mortar of 1:4 ratio admixed with acrylic polymer in Fosroc or similar acrylic modifier admixture] complete complying with standard specification and as directed by the Engr-in-charge at the site. |
| 76 | Bonding coatProviding, mixing and applying bonding coat of Polymer modified cement slurry [Cement slurry admixed with acrylic polymer in Fosroc or similar acrylic modifier admixture at the rate of 5-8% by the weight of cement] on the prepared surface and allow it to become tacky before applying the plaster etc., complete complying with standard specification and as directed by the Engr-in-charge at the site.(The modified cementitious bond coat mixed with specified proportion as per manufacturer's instructions) |
| 77 | Replastering with two layersProviding 40 mm thick Polymer modified plaster in two coats under layer 20 mm thick cement plaster 1:4, providing Fibre glass mesh as per required specifications and finished with a top layer 20 mm thick cement plaster 1:4. including polymer modifying agent [acrylic polymer in Fosroc or similar acrylic modifier admixture at the rate prescribed under manufacturer guidelines]with rough finish including all materials, labour charges, wastages, necessary lead and lifts, working at all levels including scaffolding, providing drip bands, moulds, grooves of any size and shape as required, tools and plants, fuel, curing,etc., complete complying with standard specification and as directed by the Engr-in-charge at the site.(Note: Quotd Rate is excluding the Fibre glass mesh and the same shall be measured and paid for seperately.) |
| 78 | GI MeshProviding and fixing GI Expanded Metal Sheet of size SWM 75mm x LWM 200mm width 6.50mm and thickness 3.15mm, securely anchored to existing masonry or concrete surfaces using suitable anchors or fasteners with the necessary equipment and tools, including finishing, curing at all working levels etc., complete complying with standard specification and as directed by the Engr-in-charge at the site. |
| 79 | Anti Carbonation CoatingSupply and painting of anti carbonation coating for the exterior surface with high sheen, anti algal properties, including sanding, touch up putty, surface thoroughly cleaned and wetted before painting etc., complete complying with standard specification and as directed by the Engr-in-charge at the site. |
| 80 | Chipping of ConcreteChipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges,making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts etc. complete complying with standard specification and as directed by the Engr-in-charge. |
| 81 | Anti Corrosive CoatingCleaning off rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles applying a zinc-based or metallic-based anti-corrosive coating, such as Nitozinc primer (manufactured by M/s Fosroc Chemicals or equivalent), to the cleaned reinforcement bars to protect against future corrosion etc. complete complying with standard specification and as directed by the Engr-in-charge. |
| 82 | Additional ReinforcementSupply, fabricating and fixing in position steel Fe 550 grade reinforcement for all RCC work with Thermo Mechanically Treated Bars (TMT) conforming to IS 1786 of latest version according to drawings and binding the reinforcement with 18 gauge double fold GI binding wire and providing Concrete cover blocks to maintain the cover as required. The rate is inclusive of cost of all materials, bending, tying grills, placing, transportation, lead & lifts, tools & plants, fuels, all materials, labour charges, wastages , laying at all levels, fixing in position, cost of cover blocks and GI binding wires etc. complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge. |
| 83 | Bonding CoatProviding, mixing and applying bonding coat of Polymer modified cement slurry [Cement slurry admixed with acrylic polymer in Fosroc or similar acrylic modifier admixture at the rate of 5-8% by the weight of cement] on the prepared surface and allow it to become tacky before applying the plaster etc., complete complying with standard specification and as directed by the Engineer-in-charge at the site.(The modified cementitious bond coat mixed with specified proportion as per manufacturer's instructions) |
| 84 | Polymer Modified Mortar (SP40)Providing, mixing and applying Polymer Modified Mortar, such as Renderoc SP40 (manufactured by M/s Fosroc Chemicals or equivalent), over the prepared surface as per manufacture's instructions for the plain/reinforced cement concrete structural members, including all materials, labour charges, wastages, necessary lead and lifts, working at all levels etc. complete complying with standard specification and as directed by the Engineer-in-charge. |
| 85 | Curing CompoundProviding and applying a curing membrane, such as Nitobond AR (manufactured by M/s Fosroc Chemicals or equivalent), to cure the finished surface, and minimizing shrinkage cracks for the structural elements etc.complete complying with standard specification and as directed by the Engineer-in-charge. |
| 86 | Sch A Part II (Area Drainage) |
| 87 | Demolition of brick or stone masonry built in cement mortar including all quoins, arches, pillars and angle iron fixed at top etc. complete all as specified and directed. |
| 88 | Demolition of reinforced cement concrete as in beams , columns and footings and slab etc. drains complete all as specified and directed. |
| 89 | Material and labour for PCC 1;3:6 type C-2 using 20mm graded aggregate as in surface channel and drains complete all as specified and directed. |
| 90 | Material and labour for Providing precast cement concrete Type C1 1:3:6 in string courses (of any section indicated), with plain fair faces, including chamfers,weatherings,throating etc. and setting in mortar complete with joints to match built in cement mortar 1:4 complete all as specified and directed. |
| 91 | Material and labour for Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 92 | Material and labour mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 93 | Material and labour String courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, Type B1, 1 : 2 : 4 (using 20mm graded stone aggregate) for holding down angles including necessary form work complete all as specified and directed. |
| 94 | Material and labour for RCC 1:2:4 (Nominal Mix) type B1 (using 20mm graded stone aggregate) as in precast cover slabs , chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and as directed. |
| 95 | Sch A Part III (Internal Electrification) |
| 96 | Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete including fittings such as switches, ceiling roses, pendants, regulators, sockets etc.removing materials out side MD land for credit to contractor and making good disturbed surfaces of walls, floors, etc., all as specified and as directed. Please Enable Macros to View BoQ information |
| 97 | Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete including fittings such as switches, ceiling roses, pendants, regulators, sockets etc.removing materials out side MD land for credit to contractor and making good disturbed surfaces of walls, floors, etc., all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysJul 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender