|
| 1 | Scarifying or picking gravelled, macadam or bituminous macadam surfaces exceeding 50mm deep and not exc. 100 mm deep, area not excceding 400 Sqm all as specified and directed. |
| 2 | Material and labour for bituminous macadam (Consolidated thickness 75mm or less) using Hot mix plant & Mechanical paver with @4% binder content using paving bitumen (VG-30) grade by weight of total mix , rolled and compacted by using 8 to 10 tonne power road roller to required camber and gradient complete all as specified and directed.Note: Soft stones such as lime stones, sandstones, slatestone etc will not be allowed to be incorporated in the work. |
| 3 | M & L for preparing unsurfaced water bound macadam surfaces by brushing with wire brushes for removing cracked mud, sweeping with brooms and finally fanning the cleaned surfaces with air compressor to remove all loose dirt and applying evenly a priming / tack coat with bituminous primer @ 10 Kg / 10 Sqm of surface using paving bitumen complete. |
| 4 | M& L for Preparing black top surfaces by brushing with wirebrushes for removingcaked mud etc. sweepingwith brooms andfinally fanning the cleaned surface withgunny bags to remove all loose dirt etc.complete all as spd |
| 5 | M & L for applying evenly a priming tack coat with bituminous primer @ 05 Kg / 10 Sqm of surface using paving bitumen complete. |
| 6 | M&L for laying and consolidating bituminous premixed ashphaltic semi-dense concrete 30 mm consolidtaed thickness with 5.5% binder content by weight of total mix by using paving bitumen (VG-30 Grade) any penetration rolled and compacted to required camber and gradient etc. with mechanical paver and rolled with 8 to 12 Tonne power roller and all as directed complete. |
| 7 | M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed. |
| 8 | S&F solar cat eye Aluminium alloy shell (100% water proofing design according to 65) of size 125mmx125mmx25mm (shank 60mm) of high efficiency Mono rystafine solar panel 2.4V/0.3 Watt one NI-ed rechargable Battery (1.2V/1600MA) consisting of six super bright LED with 10,000 to 18,000 mcd completed ad per manufatures instruction including taking out old cat eyes and removal from site etc all as specified and as directed (Make : Darkeye, 3M,OSCAR,BP) |
| 9 | S&F in repair Solar Delinators of 1000x47mm made of polycarbonate and toughened aluminium body height 145mm, diameter 80mm comprises of 4 super LEDs which give 360 degree viewing, solar panel - 2.5V, 120mm (approx) 1.25V rechargeable battery-1No and mounted on MS Pipe of 50mm duly powder coated , anti theft steel net of size 700mmx50mmx100mm incl removal of existing complete.all as specified and directed by Engr in Charge (Note:- Excavation for bed block of size 150x150x200mm filling with concrete 1:3:6 and clearing of the area shall be included in the rate quoted) (Make : Darkeye, 3M,OSCAR,BP) |
| 10 | S&F in repaIr speed breaker made of ABS material with two highly reflective reflectors moulded in PMMA material are welded with ABS plate through ultrasonic welding process and then fixed to on to the speed breaker of size 750x75x250mm including surface to be make level as parential surfaces and filling with concrete at base portions as required including dismantling/taking out of any type rusted/broken speed breaker complete all as specified and directed by Engr-in-Charge. Make: Dark Eye / 3M / TATA Please Enable Macros to View BoQ information |
